Search Results

Search found 43978 results on 1760 pages for 'select case'.

Page 1604/1760 | < Previous Page | 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611  | Next Page >

• How to handle multi-processing of libraries which already spawn sub-processes?

  - by exhuma

  I am having some trouble coming up with a good solution to limit sub-processes in a script which uses a multi-processed library and the script itself is also multi-processed. Both, the library and script are modifiable by us. I believe the question is more about design than actual code, but for what it's worth, it's written in Python. The goal of the library is to hide implementation details of various internet routers. For that reason, the library has a "Proxy" factory method which takes the IP of a router as parameter. The factory then probes the device using a set of possible proxies. Usually, there is one proxy which immediately knows that is is able to send commands to this device. All others usually take some time to return (given a timeout). One thought was already to simply query the device for an identifier, and then select the proper proxy using that, but in order to do so, you would already need to know how to query the device. Abstracting this knowledge is one of the main purposes of the library, so that becomes a little bit of a "circular-requirement"/deadlock: To connect to a device, you need to know what proxy to use, and to know what proxy to create, you need to connect to a device. So probing the device is - as we can see - the best solution so far, apart from keeping a lookup-table somewhere. The library currently kills all remaining processes once a valid proxy has been found. And yes, there is always only one good proxy per device. Currently there are about 12 proxies. So if one create a proxy instance using the factory, 12 sub-processes are spawned. So far, this has been really useful and worked very well. But recently someone else wanted to use this library to "broadcast" a command to all devices. So he took the library, and wrote his own multi-processed script. This obviously spawned 12 * n processes where n is the number of IPs to which he broadcasted. This has given us two problems: The host on which the command was executed slowed down to a near halt. Aborting the script with CTRL+C ground the system to a total halt. Not even the hardware console responded anymore! This may be due to some Python strangeness which still needs to be investigated. Maybe related to http://bugs.python.org/issue8296 The big underlying question, is how to design a library which does multi-processing, so other applications which use this library and want to be multi-processed themselves do not run into system limitations. My first thought was to require a pool to be passed to the library, and execute all tasks in that pool. In that way, the person using the library has control over the usage of system resources. But my gut tells me that there must be a better solution. Disclaimer: My experience with multiprocessing is fairly limited. I have implemented a few straightforward which did not require access control to resources. So I have not yet any practical experience with semaphores or mutexes. p.s.: In the future, we may have enough information to do this without the probing. But the database which would contain the proper information is not yet operational. Also, the design about multiprocessing a multiprocessed library intrigues me :)

  Read the article

• Fun tips with Analytics

  - by user12620172

  If you read this blog, I am assuming you are at least familiar with the Analytic functions in the ZFSSA. They are basically amazing, very powerful and deep. However, you may not be aware of some great, hidden functions inside the Analytic screen. Once you open a metric, the toolbar looks like this: Now, I’m not going over every tool, as we have done that before, and you can hover your mouse over them and they will tell you what they do. But…. Check this out. Open a metric (CPU Percent Utilization works fine), and click on the “Hour” button, which is the 2nd clock icon. That’s easy, you are now looking at the last hour of data. Now, hold down your ‘Shift’ key, and click it again. Now you are looking at 2 hours of data. Hold down Shift and click it again, and you are looking at 3 hours of data. Are you catching on yet? You can do this with not only the ‘Hour’ button, but also with the ‘Minute’, ‘Day’, ‘Week’, and the ‘Month’ buttons. Very cool. It also works with the ‘Show Minimum’ and ‘Show Maximum’ buttons, allowing you to go to the next iteration of either of those. One last button you can Shift-click is the handy ‘Drill’ button. This button usually drills down on one specific aspect of your metric. If you Shift-click it, it will display a “Rainbow Highlight” of the current metric. This works best if this metric has many ‘Range Average’ items in the left-hand window. Give it a shot. Also, one will sometimes click on a certain second of data in the graph, like this:  In this case, I clicked 4:57 and 21 seconds, and the 'Range Average' on the left went away, and was replaced by the time stamp. It seems at this point to some people that you are now stuck, and can not get back to an average for the whole chart. However, you can actually click on the actual time stamp of "4:57:21" right above the chart. Even though your mouse does not change into the typical browser finger that most links look like, you can click it, and it will change your range back to the full metric. Another trick you may like is to save a certain view or look of a group of graphs. Most of you know you can save a worksheet, but did you know you could Sync them, Pause them, and then Save it? This will save the paused state, allowing you to view it forever the way you see it now.  Heatmaps. Heatmaps are cool, and look like this:  Some metrics use them and some don't. If you have one, and wish to zoom it vertically, try this. Open a heatmap metric like my example above (I believe every metric that deals with latency will show as a heatmap). Select one or two of the ranges on the left. Click the "Change Outlier Elimination" button. Click it again and check out what it does.  Enjoy. Perhaps my next blog entry will be the best Analytic metrics to keep your eyes on, and how you can use the Alerts feature to watch them for you. Steve 

  Read the article

• Drive

  - by erikanollwebb

  Picking up where we left off, let's summarize.  People have both intrinsic motivation and extrinsic motivation, and whether reward works depends a bit on what you are rewarding.  Rewards don't decreased intrinsic motivation provided you know what you are getting and why, and when you reward high performance.  But as anyone who has watched the great animation of Dan Pink's TED talk knows, even that doesn't tell the whole story.  Although people may not be less intrinsically motivated by rewards, the impact of rewards on actual performance is a really odd questions.  Larger rewards don't necessarily lead to better performance and in fact, some times lead to worse performance.  Pink argues that people are driven and engaged when they have autonomy, mastery and purpose.  If they can self-direct and can be good at what they do and have a sense of purpose for what they are doing, they show the highest engagement.   (Personally, I would add progress to the list.  My experience is that if you have autonomy, mastery and a sense of purpose but don't get a feeling that you are making any progress day to day, your level of engagement will drop rapidly.) So Pink is arguing if we could set up work so that people have a sense of purpose in what they do, have some autonomy and the ability to build mastery, you'll have better companies.  And that's probably true in a lot of ways, but there's a problem.  Sometimes, you have things you need to do but maybe you don't really want to do.  Or that you don't really see the point of.  Or that doesn't have a lot of value to you at the end of the day.  Then what does a company do?  Let me give you an example.  I've worked on some customer relationship management (CRM) tools over the years and done user research with sales people to try and understand their world.  And there's a funny thing about sales tools in CRM.  Sometimes what the company wants a sales person to do is at odds with what a sales person thinks is useful to them.  For example, companies would like to know who a sales person talked to at the company and the person level.  They'd like to know what they talked about, when, and whether the deals closed.  Those metrics would help you build a better sales force and understand what works and what does not.  But sales people see that as busy work that doesn't add any value to their ability to sell.  So you have a sales person who has a lot of autonomy, they like to do things that improve their ability to sell and they usually feel a sense of purpose--the group is trying to make a quota!  That quota will help the company succeed!  But then you have tasks that they don't think fit into that equation.  The company would like to know more about what makes them successful and get metrics on what they do and frankly, have a record of what they do in case they leave, but the sales person thinks it's a waste of time to put all that information into a sales application. They have drive, just not for all the things the company would like.   You could punish them for not entering the information, or you could try to reward them for doing it, but you still have an imperfect model of engagement.  Ideally, you'd like them to want to do it.  If they want to do it, if they are motivated to do it, then the company wins.  If *something* about it is rewarding to them, then they are more engaged and more likely to do it.  So the question becomes, how do you create that interest to do something?

  Read the article

• Dynamically Changing the Display Names of Menus and Popups

  - by Geertjan

  Very interesting thing and handy to know when needed is the fact that "menuText" and "popupText" (from org.openide.awt.ActionRegistration) can be changed dynamically, via "putValue" as shown below for "popupText". The Action class, in this case, needs to be eager, hence you won't receive the object of interest via the constructor, but you can easily use the global Lookup for that purpose instead, as also shown below. import java.awt.event.ActionEvent; import java.text.DateFormat; import java.text.SimpleDateFormat; import javax.swing.AbstractAction; import org.netbeans.api.project.Project; import org.netbeans.api.project.ProjectInformation; import org.netbeans.api.project.ProjectUtils; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionRegistration; import org.openide.util.Utilities; @ActionID( category = "Project", id = "org.ptt.DemoProjectAction") @ActionRegistration( lazy = false, displayName = "NOT-USED") @ActionReference(path = "Projects/Actions", position = 0) public final class DemoProjectAction extends AbstractAction{ private final ProjectInformation context; public DemoProjectAction() { putValue("popupText", "Select Me To See Current Time!"); context = ProjectUtils.getInformation( Utilities.actionsGlobalContext().lookup(Project.class)); } @Override public void actionPerformed(ActionEvent e) { refresh(); } protected void refresh() { DateFormat formatter = new SimpleDateFormat("HH:mm:ss"); String formatted = formatter.format(System.currentTimeMillis()); putValue("popupText", "Time: " + formatted + " (" + context.getDisplayName() +")"); } } Now, let's do something semi useful and display, in the popup, which is available when you right-click a project, the time since the last change was made anywhere in the project, i.e., we can listen recursively to any changes done within a project and then update the popup with the newly acquired information, dynamically: import java.awt.event.ActionEvent; import java.text.DateFormat; import java.text.SimpleDateFormat; import javax.swing.AbstractAction; import org.netbeans.api.project.Project; import org.netbeans.api.project.ProjectUtils; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionRegistration; import org.openide.filesystems.FileAttributeEvent; import org.openide.filesystems.FileChangeListener; import org.openide.filesystems.FileEvent; import org.openide.filesystems.FileRenameEvent; import org.openide.util.Utilities; @ActionID( category = "Project", id = "org.ptt.TrackProjectTimerAction") @ActionRegistration( lazy = false, displayName = "NOT-USED") @ActionReference( path = "Projects/Actions", position = 0) public final class TrackProjectTimerAction extends AbstractAction implements FileChangeListener { private final Project context; private Long startTime; private Long changedTime; private DateFormat formatter; public TrackProjectTimerAction() { putValue("popupText", "Enable project time tracker"); this.formatter = new SimpleDateFormat("HH:mm:ss"); context = Utilities.actionsGlobalContext().lookup(Project.class); context.getProjectDirectory().addRecursiveListener(this); } @Override public void actionPerformed(ActionEvent e) { startTimer(); } protected void startTimer() { startTime = System.currentTimeMillis(); String formattedStartTime = formatter.format(startTime); putValue("popupText", "Timer started: " + formattedStartTime + " (" + ProjectUtils.getInformation(context).getDisplayName() + ")"); } @Override public void fileChanged(FileEvent fe) { changedTime = System.currentTimeMillis(); formatter = new SimpleDateFormat("mm:ss"); String formattedLapse = formatter.format(changedTime - startTime); putValue("popupText", "Time since last change: " + formattedLapse + " (" + ProjectUtils.getInformation(context).getDisplayName() + ")"); startTime = changedTime; } @Override public void fileFolderCreated(FileEvent fe) {} @Override public void fileDataCreated(FileEvent fe) {} @Override public void fileDeleted(FileEvent fe) {} @Override public void fileRenamed(FileRenameEvent fre) {} @Override public void fileAttributeChanged(FileAttributeEvent fae) {} }

  Read the article

• GameStateManagement and inputs not being recognized

  - by Dave Voyles

  EDIT: I've removed a bit of code from the input class to make this more readable, and updated my StartScreen class, which is now at the bottom. I have the same issues though, but they are explained in my comments on the bottom of this page. It won't let me paste my additional code here (the format comes out crazy), so I've linked to pastebin with the code pastebin I've been trying to implement the MS provided GameStateManagement sample with my game, but it has proven a bit difficult. Really, I'm using Oneksoft's Starter Kit, which uses the MS provided sample, so they are identical, except for my splash screen. I'm able to get the splash screen to launch, where it informs the player to press A to advance the screen, but this doesn't seem to accept any of my inputs. I’ve also added Console.Writeline(“Pressing A”) under the IsMenuPressed method in Input.cs to verify that it is getting called, but for some reason it is constantly spamming my log, rather than just appearing each time I press it. Not sure why this is happening. I have a bit too much code to post it all here, so I’ve attached a link to my .rar with my classes, but I’ll also leave a bit here which I thinkmay be applicable. https://www.dropbox.com/sh/6ek4uru2jc2ch0k/JTeBWN_3PQ What do you guys think the issue is? namespace Pong { public class Input { public const int MaxInputs = 4; public readonly KeyboardState[] CurrentKeyboardState; public readonly GamePadState[] CurrentGamePadState; public KeyboardState[] LastKeyboardState; public GamePadState[] LastGamePadState; public readonly bool[] GamePadWasConnected; public Input() { // Get input state CurrentKeyboardState = new KeyboardState[MaxInputs]; CurrentGamePadState = new GamePadState[MaxInputs]; // Preserving last states to check for isKeyUp events LastKeyboardState = CurrentKeyboardState; LastGamePadState = CurrentGamePadState; } /// <summary> /// Checks for a "menu select" input action. /// The controllingPlayer parameter specifies which player to read input for. /// If this is null, it will accept input from any player. When the action /// is detected, the output playerIndex reports which player pressed it. /// </summary> public bool IsMenuSelect(PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { Console.WriteLine("Pressing A"); return IsNewKeyPress(Keys.Space, controllingPlayer, out playerIndex) || IsNewKeyPress(Keys.Enter, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.A, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.Start, controllingPlayer, out playerIndex); } /// <summary> /// Checks for a "menu cancel" input action. /// The controllingPlayer parameter specifies which player to read input for. /// If this is null, it will accept input from any player. When the action /// is detected, the output playerIndex reports which player pressed it. /// </summary> public bool IsMenuCancel(PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { return IsNewKeyPress(Keys.Escape, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.B, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.Back, controllingPlayer, out playerIndex); }

  Read the article

• An observation on .NET loops – foreach, for, while, do-while

  It’s very common that .NET programmers use “foreach” loop for iterating through collections. Following is my observation whilst I was testing simple scenario on loops. “for” loop is 30% faster than “foreach” and “while” loop is 50% faster than “foreach”. “do-while” is bit faster than “while”. Someone may feel that how does it make difference if I’m iterating only 1000 times in a loop. This test case is only for simple iteration. According to the "Data structure" concepts, best and worst cases are completely based on the data we provide to the algorithm. so we can not conclude that a "foreach" algorithm is not good. All I want to tell that we need to be little cautious even choosing the loops. Example:- You might want to chose quick sort when you want to sort more numbers. At the same time bubble sort may be effective than quick sort when you want to sort less numbers. Take a simple scenario, a request of a simple web application fetches the data of 10000 (10K) rows and iterating them for some business logic. Think, this application is being accessed by 1000 (1K) people simultaneously. In this simple scenario you are ending up with 10000000 (10Million or 1 Crore) iterations. below is the test scenario with simple console application to test 100 Million records. using System;using System.Collections.Generic;using System.Diagnostics;namespace ConsoleApplication1{ class Program { static void Main(string[] args) { var sw = new Stopwatch(); var numbers = GetSomeNumbers(); sw.Start(); foreach (var item in numbers) { } sw.Stop(); Console.WriteLine( String.Format("\"foreach\" took {0} milliseconds", sw.ElapsedMilliseconds)); sw.Reset(); sw.Start(); for (int i = 0; i < numbers.Count; i++) { } sw.Stop(); Console.WriteLine( String.Format("\"for\" loop took {0} milliseconds", sw.ElapsedMilliseconds)); sw.Reset(); sw.Start(); var it = 0; while (it++ < numbers.Count) { } sw.Stop(); Console.WriteLine( String.Format("\"while\" loop took {0} milliseconds", sw.ElapsedMilliseconds)); sw.Reset(); sw.Start(); var it2 = 0; do { } while (it2++ < numbers.Count); sw.Stop(); Console.WriteLine( String.Format("\"do-while\" loop took {0} milliseconds", sw.ElapsedMilliseconds)); } #region Get me 10Crore (100 Million) numbers private static List<int> GetSomeNumbers() { var lstNumbers = new List<int>(); var count = 100000000; for (var i = 1; i <= count; i++) { lstNumbers.Add(i); } return lstNumbers; } #endregion Get me some numbers }} In above example, I was just iterating through 100 Million numbers. You can see the time to execute various  loops provided in .NET Output "foreach" took 1108 milliseconds "for" loop took 727 milliseconds "while" loop took 596 milliseconds "do-while" loop took 594 milliseconds   Press any key to continue . . . So I feel we need to be careful while choosing the looping strategy. Please comment your thoughts. span.fullpost {display:none;}

  Read the article

• Moving abroad - Relocation advice

  - by Tim Koekkoek

  Oracle offers graduates from different European countries the opportunity to start their career abroad. Some already have experience with living abroad as they have done an exchange semester or internship in another county, for others it is the first time they will move abroad. Rui started in October 2011 as a Business Development Consultant in Dublin and moved from Portugal to Dublin, Ireland to start his career. For those planning to leave their home country and who desire to work abroad, he will share some tips and tricks in this article. When you’re faced with an opportunity like this, there are lots of things that will come to your mind. Sometimes it can be either very exciting, or even stressful. 1. First of all, try to relax. If you are certain you are moving abroad, all you need to do is some research about the country where you’re going to live, get to know its culture (gastronomy, important dates and events, its economy and effective ways to keep you in touch with your family and friends – such as mobile companies and Internet services), and start to understand the best locations (with good access) you could/should live in are. Don’t forget that initially you can be limited by transport and therefore it is important to explore the ideal places for you. During this time, Oracle provides everything you’ll need (papers, documents, etc.) to cross borders. 2. When you arrive, you understand that you are in a new country, in a new place, where all things (or most) are unknown to you. Before you panic, try to see it as a new challenge where new opportunities will come. Sometimes, it’s not easy I know, but the very best a new place has to give to you, is the opportunity to understand a new culture, get to know other people, other ways of working, and grow both as a person and professionally. So, you have nothing to lose in this kind of experiment. 3. When you arrive at Oracle, there’s a fantastic team that will help you with settling in, HR, Payroll, Relocation, IT. In my case, Oracle helped me with the relocation, they supported me to arrange everything such as helping out with all the paperwork and finding a new apartment. As you can see they will do their best to help you to be successful! 4. Engage with your new co-workers. Going to a place where you don’t know anyone can be tough sometimes but see it as an opportunity to meet people from all over the world and share experiences. Embrace it. 5. Plan ahead, try to get the most information possible and use it. Oracle is a multinational enterprise that will allow you to get to know a new labour market and give you the flexibility you need to understand your view of employment and occupation, giving you the very best opportunities to join different teams and working areas, so that you can work where you fit best. Good luck! If you’re thinking about starting a career abroad, read the following article: http://www.overseasdigest.com/movingtips.htm it can be very useful to you. Interested in starting your career at Oracle like Rui has? Please have a look at https://campus.oracle.com for all of our latest vacancies.

  Read the article

• Extreme Makeover, Phone Edition: Comcasts xfinity

  Mobile Makeover For many companies the first foray into Windows Phone 7 (WP7) may be in porting their existing mobile apps. It is tempting to simply transfer existing functionality, avoiding the additional design costs. Readdressing business needs and taking advantage of the WP7 platform can reduce cost and is essential to a successful re-launch. To better understand the advantage of new development lets examine a conceptual upgrade of Comcasts existing mobile app. Before Comcast has a great mobile app that provides several key features. The ability to browse the lineup using a guide, a client for Comcast email accounts, On Demand gallery, and much more. We will leverage these and build on them using some of the incredible WP7 features.   After With the proliferation of DVRs (Digital Video Recorders) and a variety of media devices (TV, PC, Mobile) content providers are challenged to find creative ways to build their brands. Every client touch point must provide both value added services as well as opportunities for marketing and up-sale; WP7 makes it easy to focus on those opportunities. The new app is an excellent vehicle for presenting Comcasts newly rebranded TV, Voice, and Internet services. These services now fly under the banner of xfinity and have been expanded to provide the best experience for Comcast customers. The Windows Phone 7 app will increase the surface area of this service revolution.   The home menu is simplified and highlights Comcasts Triple Play: Voice, TV, and Internet. The inbox has been replaced with a messages view, and message management is handled by a WP7 hub. The hub presents emails, tweets, and IMs from Comcast and other viewers the user follows on Twitter.  The popular view orders shows based on the users viewing history and current cable package. The first show Glee is both popular and participating in a conceptual co-marketing effort, so it receives prime positioning. The second spot goes to a hit show on a premium channel, in this example HBOs The Pacific, encouraging viewers to upgrade for this premium content. The remaining spots are ordered based on viewing history and popularity. Tapping the play button moves the user to the theatre where they can watch previews or full episodes streaming from Fancast. Tapping an extra presents the user with show details as well as interactive content that may be included as part of co-marketing efforts. Co-Marketing with Dynamic Content The success of Comcasts services are tied to the success of the networks and shows it purveys, making co-marketing efforts essential. In this concept FOX is co-marketing its popular show Glee. A customized panorama is updated with the latest gleeks tweets, streaming HD episodes, and extras featuring photos and video of the cast. If WP7 apps can be dynamically extended with web hosted .xap files, including sandboxed partner experiences would enable interactive features such as the Gleek Peek, in which a viewer can select a character from a panorama to view the actors profile. This dynamic inline experience has a tailored appeal to aspiring creatives and is technically possible with Windows Phone 7.   Summary The conceptual Comcast mobile app for Windows Phone 7 highlights just a few of the incredible experiences and business opportunities that can be unlocked with this latest mobile solution. It is critical that organizations recognize and take full advantage of these new capabilities. Simply porting existing mobile applications does not leverage these powerful tools; re-examining existing applications and upgrading them to Windows Phone 7 will prove essential to the continued growth and success of your brand.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• I am trying to create an windows application watcher? [migrated]

  - by Broken_Code

  I recently started coding in c #(in may this year) and well I find it best to learn by working with code. this application http://www.c-sharpcorner.com/UploadFile/satisharveti/ActiveApplicationWatcher01252007024921AM/ActiveApplicationWatcher.aspx. I am trying to recreate it however mine will be saving the information into an sql database(new at this as well). I am having some coding problems though as it does not do what I expect it to do. THis is the main code I am using. private void GetTotalTimer() { DateTime now = DateTime.Now; IntPtr hwnd = APIFunc.getforegroundWindow(); Int32 pid = APIFunc.GetWindowProcessID(hwnd); Process p = Process.GetProcessById(pid); appName = p.ProcessName; const int nChars = 256; int handle = 0; StringBuilder Buff = new StringBuilder(nChars); handle = GetForegroundWindow(); appltitle = APIFunc.ActiveApplTitle().Trim().Replace("\0", ""); //if (GetWindowText(handle, Buff, nChars) > 0) //{ // string strbuff = Buff.ToString(); // StrWindow = strbuff; #region insert statement try { if (Conn.State == ConnectionState.Closed) { Conn.Open(); } if (Conn.State == ConnectionState.Open) { SqlCommand com = new SqlCommand("Select top 1 [Window Title] From TimerLogs ORDER BY [Time of Event] DESC", Conn); SqlDataReader reader = com.ExecuteReader(); startTime = DateTime.Now; string time = now.ToString(); if (!reader.HasRows) { reader.Close(); cmd = new SqlCommand("insert into [TimerLogs] values(@time,@appName,@appltitle,@Elapsed_Time,@userName)", Conn); cmd.Parameters.AddWithValue("@time", time); cmd.Parameters.AddWithValue("@appName", appName); cmd.Parameters.AddWithValue("@appltitle", appltitle); cmd.Parameters.AddWithValue("@Elapsed_Time", blank.ToString()); cmd.Parameters.AddWithValue("@userName", userName); cmd.ExecuteNonQuery(); Conn.Close(); } else if(reader.HasRows) { reader.Read(); if (appltitle != reader.ToString()) { reader.Close(); endTime = DateTime.Now; appduration = endTime.Subtract(startTime); cmd = new SqlCommand("insert into [TimerLogs] values (@time,@appName,@appltitle,@Elapsed_Time,@userName)", Conn); cmd.Parameters.AddWithValue("@time", time); cmd.Parameters.AddWithValue("@appName", appName); cmd.Parameters.AddWithValue("@appltitle", appltitle); cmd.Parameters.AddWithValue("@Elapsed_Time", appduration.ToString()); cmd.Parameters.AddWithValue("@userName", userName); cmd.ExecuteNonQuery(); reader.Close(); Conn.Close(); } } } } catch (Exception) { } //} #endregion ActivityTimer.Start(); Processing = "Working"; } Unfortunately this is the result. it is not saving the data as I expect it to. What am i doing wrong I had thought that with the sql reader it would first check for a value and only save if they do not match however it is saving whether there is a match or not.

  Read the article

• Use a custom value object or a Guid as an entity identifier in a distributed system?

  - by Kazark

  tl;dr I've been told that in domain-driven design, an identifier for an entity could be a custom value object, i.e. something other than Guid, string, int, etc. Can this really be advisable in a distributed system? Long version I will invent an situation analogous to the one I am currently facing. Say I have a distributed system in which a central concept is an egg. The system allows you to order eggs and see spending reports and inventory-centric data such as quantity on hand, usage, valuation and what have you. There area variety of services backing these behaviors. And say there is also another app which allows you to compose recipes that link to a particular egg type. Now egg type is broken down by the species—ostrich, goose, duck, chicken, quail. This is fine and dandy because it means that users don't end up with ostrich eggs when they wanted quail eggs and whatnot. However, we've been getting complaints because jumbo chicken eggs are not even close to equivalent to small ones. The price is different, and they really aren't substitutable in recipes. And here we thought we were doing users a favor by not overwhelming them with too many options. Currently each of the services (say, OrderSubmitter, EggTypeDefiner, SpendingReportsGenerator, InventoryTracker, RecipeCreator, RecipeTracker, or whatever) are identifying egg types with an industry-standard integer representation the species (let's call it speciesCode). We realize we've goofed up because this change could effect every service. There are two basic proposed solutions: Use a predefined identifier type like Guid as the eggTypeID throughout all the services, but make EggTypeDefiner the only service that knows that this maps to a speciesCode and eggSizeCode (and potentially to an isOrganic flag in the future, or whatever). Use an EggTypeID value object which is a combination of speciesCode and eggSizeCode in every service. I've proposed the first solution because I'm hoping it better encapsulates the definition of what an egg type is in the EggTypeDefiner and will be more resilient to changes, say if some people now want to differentiate eggs by whether or not they are "organic". The second solution is being suggested by some people who understand DDD better than I do in the hopes that less enrichment and lookup will be necessary that way, with the justification that in DDD using a value object as an ID is fine. Also, they are saying that EggTypeDefiner is not a domain and EggType is not an entity and as such should not have a Guid for an ID. However, I'm not sure the second solution is viable. This "value object" is going to have to be serialized into JSON and URLs for GET requests and used with a variety of technologies (C#, JavaScript...) which breaks encapsulation and thus removes any behavior of the identifier value object (is either of the fields optional? etc.) Is this a case where we want to avoid something that would normally be fine in DDD because we are trying to do DDD in a distributed fashion? Summary Can it be a good idea to use a custom value object as an identifier in a distributed system (solution #2)?

  Read the article

• Changing the Operating System with only Ubuntu installed

  - by Games Brainiac

  I really wanted to dive into the world of Open Source operating systems, so I downloaded the latest version of Ubuntu (13.10), and installed it on a clean(no operating system installed, absolutely nothing) Lenovo ThinkPad machine. After a few days, I wanted to try out a different Operating System (Elementary OS). I downloaded the ISO file, burned it to a USB, tested that the USB booted from a different computer (I have 2, one is the Lenovo, the other a HP). I was able to get the bootscreen, and everything worked like a charm after I set the BIOS to boot from USB Disk Drive instead of HD. After this, I went back to Lenovo, and tried to open up the boot menu, by pressing F12, so that I could load from a temporary device. To my surprise, nothing but the HD was listed. There was no Optical Drive, No USB Drive, absolutely nothing. So, I thought that these devices were probably disabled. So I went into my BIOS and checked to see what was the case. I saw that all my devices were enabled. USB and all the other devices such as network cable and the rest were all enabled. So, I thought this probably had something to do wit UEFI and Legacy Boot options. So, I made sure that both were enabled. This did not solve the problem either. Again, I got nothing but the option to boot from my Hard Disk. I thought the USB had to be at fault. I tried different ports, but to no avail. Next, I tried with a Live CD, which had Ubuntu on it. This failed too. I simply could not boot from anything other than my hard disk. Okay, so at this point, I was pretty desperate, so I installed Boot-Repair through: sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install boot-repair What this did is lead me to GRUB. Ideally, its just a screen that gives me the option to load from Ubuntu or Advanced Settings. The Advanced settings had nothing but Ubuntu options in it. So, I kept on pressing ESC and that led me to the the grub console, and thats where I am right now with my Lenovo. I've also tried updating the BIOS, but Lenovo only has packages for Red Hat and Windows. So, a dead end there too. Right now, I need to know if there is any way that I can just delete everything from my Lenovo? I want to revert it back to its blank factory condition. How can I achieve this? I have tried to elaborate my problem as best I could. If there is any important information that I've missed out, please do not hesitate to leave a comment. I would have included some screen shots, but BIOS screen shots are a little hard to manage. However, I can provide a camera Image of the boot screen if needed (doing that as we speak).

  Read the article

• Access Control Lists for Roles

  - by Kyle Hatlestad

  Back in an earlier post, I wrote about how to enable entity security (access control lists, aka ACLs) for UCM 11g PS3.  Well, there was actually an additional security option that was included in that release but not fully supported yet (only for Fusion Applications).  It's the ability to define Roles as ACLs to entities (documents and folders).  But now in PS5, this security option is now fully supported.   The benefit of defining Roles for ACLs is that those user roles come from the enterprise security directory (e.g. OID, Active Directory, etc) and thus the WebCenter Content administrator does not need to define them like they do with ACL Groups (Aliases).  So it's a bit of best of both worlds.  Users are managed through the LDAP repository and are automatically granted/denied access through their group membership which are mapped to Roles in WCC.  A different way to think about it is being able to add multiple Accounts to content items...which I often get asked about.  Because LDAP groups can map to Accounts, there has always been this association between the LDAP groups and access to the entity in WCC.  But that mapping had to define the specific level of access (RWDA) and you could only apply one Account per content item or folder.  With Roles for ACLs, it basically takes away both of those restrictions by allowing users to define more then one Role and define the level of access on-the-fly. To turn on ACLs for Roles, there is a component to enable.  On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top.   In the list of Disabled Components, enable the RoleEntityACL component. Then restart.  This is assuming the other configuration settings have been made for the other ACLs in the earlier post.   Once enabled, a new metadata field called xClbraRoleList will be created.  If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. For Users and Groups, these values are automatically picked up from the corresponding database tables.  In the case of Roles, there is an explicitly defined list of choices that are made available.  These values must match the roles that are coming from the enterprise security repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager.  On the Views tab, edit the values for the ExternalRolesView.  By default, 'guest' and 'authenticated' are added.  Once added, you can assign the roles to your content or folder. If you are a user that can both access the Security Group for that item and you belong to that particular Role, you now have access to that item.  If you don't belong to that Role, you won't! [Extra] Because the selection mechanism for the list is using a type-ahead field, users may not even know the possible choices to start typing to.  To help them, one thing you can add to the form is a placeholder field which offers the entire list of roles as an option list they can scroll through (assuming its a manageable size)  and view to know what to type to.  By being a placeholder field, it won't need to be added to the custom metadata database table or search engine.  

  Read the article

• What's new in Servlet 3.1 ? - Java EE 7 moving forward

  - by arungupta

  Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• Using WKA in Large Coherence Clusters (Disabling Multicast)

  - by jpurdy

  Disabling hardware multicast (by configuring well-known addresses aka WKA) will place significant stress on the network. For messages that must be sent to multiple servers, rather than having a server send a single packet to the switch and having the switch broadcast that packet to the rest of the cluster, the server must send a packet to each of the other servers. While hardware varies significantly, consider that a server with a single gigabit connection can send at most ~70,000 packets per second. To continue with some concrete numbers, in a cluster with 500 members, that means that each server can send at most 140 cluster-wide messages per second. And if there are 10 cluster members on each physical machine, that number shrinks to 14 cluster-wide messages per second (or with only mild hyperbole, roughly zero). It is also important to keep in mind that network I/O is not only expensive in terms of the network itself, but also the consumption of CPU required to send (or receive) a message (due to things like copying the packet bytes, processing a interrupt, etc). Fortunately, Coherence is designed to rely primarily on point-to-point messages, but there are some features that are inherently one-to-many: Announcing the arrival or departure of a member Updating partition assignment maps across the cluster Creating or destroying a NamedCache Invalidating a cache entry from a large number of client-side near caches Distributing a filter-based request across the full set of cache servers (e.g. queries, aggregators and entry processors) Invoking clear() on a NamedCache The first few of these are operations that are primarily routed through a single senior member, and also occur infrequently, so they usually are not a primary consideration. There are cases, however, where the load from introducing new members can be substantial (to the point of destabilizing the cluster). Consider the case where cluster in the first paragraph grows from 500 members to 1000 members (holding the number of physical machines constant). During this period, there will be 500 new member introductions, each of which may consist of several cluster-wide operations (for the cluster membership itself as well as the partitioned cache services, replicated cache services, invocation services, management services, etc). Note that all of these introductions will route through that one senior member, which is sharing its network bandwidth with several other members (which will be communicating to a lesser degree with other members throughout this process). While each service may have a distinct senior member, there's a good chance during initial startup that a single member will be the senior for all services (if those services start on the senior before the second member joins the cluster). It's obvious that this could cause CPU and/or network starvation. In the current release of Coherence (3.7.1.3 as of this writing), the pure unicast code path also has less sophisticated flow-control for cluster-wide messages (compared to the multicast-enabled code path), which may also result in significant heap consumption on the senior member's JVM (from the message backlog). This is almost never a problem in practice, but with sufficient CPU or network starvation, it could become critical. For the non-operational concerns (near caches, queries, etc), the application itself will determine how much load is placed on the cluster. Applications intended for deployment in a pure unicast environment should be careful to avoid excessive dependence on these features. Even in an environment with multicast support, these operations may scale poorly since even with a constant request rate, the underlying workload will increase at roughly the same rate as the underlying resources are added. Unless there is an infrastructural requirement to the contrary, multicast should be enabled. If it can't be enabled, care should be taken to ensure the added overhead doesn't lead to performance or stability issues. This is particularly crucial in large clusters.

  Read the article

• MySQL, An Ideal Choice for The Cloud

  - by Bertrand Matthelié

  As the world's most popular web database, MySQL has quickly become the leading database for the cloud, with most providers offering MySQL-based services. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Access our Resource Kit to discover: Why MySQL has become the leading database in the cloud, and how it addresses the critical attributes of cloud-based deployments How ISVs rely on MySQL to power their SaaS offerings Best practices to deploy the world’s most popular open source database in public and private clouds Normal 0 false false false EN-US X-NONE X-NONE You will also find out how you can leverage MySQL together with Hadoop and other technologies to unlock the value of Big Data, either on-premise or in the cloud. Access white papers, webinars, case studies and other resources in /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} our Resource Kit now!

  Read the article

• DirectX particle system. ConstantBuffer

  - by Liuka

  I'm new in DirectX and I'm making a 2D game. I want to use a particle system to simulate a 3D starfield, so each star has to set its own constant buffer for the vertexshader es. to set it's world matrix. So if i have 500 stars (that move every frame) i need to call 500 times VSsetconstantbuffer, and map/unmap each buffer. with 500 stars i have an average of 220 fps and that's quite good. My bottelneck is Vs/PsSetconstantbuffer. If i dont call this function i have 400 fps(obliviously nothing is display, since i dont set the position of the stars). So is there a method to speed up the render of the particle system?? Ps. I'm using intel integrate graphic (hd 2000-3000). with a nvidia (or amd) gpu will i have the same bottleneck?? If, for example, i dont call setshaderresource i have 10-20 fps more (for 500 objcets), that is not 180.Why does SetConstantBuffer take so long?? LPVOID VSdataPtr = VSmappedResource.pData; memcpy(VSdataPtr, VSdata, CszVSdata); context->Unmap(VertexBuffer, 0); result = context->Map(PixelBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &PSmappedResource); if (FAILED(result)) { outputResult.OutputErrorMessage(TITLE, L"Cannot map the PixelBuffer", &result, OUTPUT_ERROR_FILE); return; } LPVOID PSdataPtr = PSmappedResource.pData; memcpy(PSdataPtr, PSdata, CszPSdata); context->Unmap(PixelBuffer, 0); context->VSSetConstantBuffers(0, 1, &VertexBuffer); context->PSSetConstantBuffers(0, 1, &PixelBuffer); this update and set the buffer. It's part of the render method of a sprite class that contains a the vertex buffer and the texture to apply to the quads(it's a 2d game) too. I have an array of 500 stars (sprite setup with a star texture). Every frame: clear back buffer; draw the array of stars; present the backbuffer; draw also call the function update( which calculate the position of the sprite on screen based on a "camera class") Ok, create a vertex buffer with the vertices of each quads(stars) seems to be good, since the stars don't change their "virtual" position; so.... In a particle system (where particles move) it's better to have all the object in only one vertices array, rather then an array of different sprite/object in order to update all the vertices' position with a single setbuffer call. In this case i have to use a dynamic vertex buffer with the vertices positions like this: verticesForQuad={{ XMFLOAT3((float)halfDImensions.x-1+pos.x, (float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(1.0f, 0.0f) }, { XMFLOAT3((float)halfDImensions.x-1+pos.x, -(float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(1.0f, 1.0f) }, { XMFLOAT3(-(float)halfDImensions.x-1+pos.x, (float)halfDImensions.y-1.pos.y, 1.0f), XMFLOAT2(0.0f, 0.0f) }, { XMFLOAT3(-(float)halfDImensions.x-1.pos.x, -(float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(0.0f, 1.0f) }, ....other quads} where halfDimensions is the halfsize in pixel of a texture and pos the virtual position of a star. than create an array of verticesForQuad and create the vertex buffer ZeroMemory(&vertexDesc, sizeof(vertexDesc)); vertexDesc.Usage = D3D11_USAGE_DEFAULT; vertexDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexDesc.ByteWidth = sizeof(VertexType)* 4*numStars; ZeroMemory(&resourceData, sizeof(resourceData)); resourceData.pSysMem = verticesForQuad; result = device->CreateBuffer(&vertexDesc, &resourceData, &CvertexBuffer); and call each frame Context->IASetVertexBuffers(0, 1, &CvertexBuffer, &stride, &offset); But if i want to add and remove obj i have to recreate the buffer each time, havent i?? There is a faster way? I think i can create a vertex buffer with a max size (es. 10000 objs) and when i update it set only the 250 position (for 250 onjs for example) and pass this number as the vertexCount to the draw function (numObjs*4), or i'm worng

  Read the article

• Dual monitor not working completely in 12.10 after upgrade

  - by Mark Baldridge

  At 12.04, dual monitors worked perfectly. After upgrading to 12.10, the primary monitor works, the second monitor only partly works. I am sure there is some difference between the releases that I have missed setting properly. System settings - Displays show both correctly as Acer 22" monitors at 1680x1050 (16:10). An icon on monitor 2 is present, but elongated; almost an artifact, since other icons on the primary screen are absent, but this one icon is there on th second monitor. Selecting the icons on both screens exist. Painting is weird on monitor 2. Launcher exists and works on both screens, but even with sticky edges off, the cursor stops at the left edge of monitor 2. Clicking on text editor on screen 2 launcer will launch gedit there. If I drag it, it leaves a trail of after images like repaint is failing. If I drive the cursor on the launcher, the help tags like "LibreOffice Writer" appear, but stay on screen unless I drag the active gedit window over them. Then part of the help bubbles are overwritten, leaving behind after images of the gedit window on screen. What is really fascinating is that the System settings - Displays is now ignoring monitor selection, after allowing it earlier. Just before this, the help popup which said "Select a monitor to change its properties; drag to rearrange its placement" actually let me do that. Maybe a trick of where I grab the edge of the monitor in the Displays setting. I just found a working handle. When I drag monitor 1 to the right of monitor 2, "Apply" and confirm, both monitors work normally (although the right monitor lets the cursor slide off the right edge onto the left edge of monitor 1 - which sounds correct). Painting of windows does not leave an after image. However, success is only temporary. The setting survives the reboot, but painting on the left monitor, now monitor 2, now replicates the issues from before. The after image of the gedit window and the small window for "Are you sure you want to close all programs and restart the computer?" are still on monitor 2 (on the left now), even though they are not real windows, nor do they have processes behind them. Curiously, in Displays, the "green" monitor on the left in the display window is matched by the right monitor color in the monitor upper left corner. Probably makes sense as the one on the right is now monitor 1. If I repeat the "drag the left monitor to the right of the right monitor on the "Displays" window, things are oriented properly, with no display artifacts as I drag windows around either screen. Also the description bubbles that pop up are overwritten on both screens, so none of those artifacts either. This goodness does not survive a reboot, however. Have not tried logging out and back in. All of this after positing that the motherboard VGA and HDMI ports could have been the issue. So, I installed an e-GeForce 7600 GT Dual DVI (I know the web thinks it is not DVI, but VGA, but the connectors are DVI). No change to the weird behavior. The good parts continue to work, the weirdness also works, and swapping monitor positions seems to cure the issue. So, is there a setting I have missed? Given "swapping" monitor 1 and 2 on the System Settings... - Displays makes it work, just not across boot, I suspect so.

  Read the article

• Why is x=x++ undefined?

  - by ugoren

  It's undefined because the it modifies x twice between sequence points. The standard says it's undefined, therefore it's undefined. That much I know. But why? My understanding is that forbidding this allows compilers to optimize better. This could have made sense when C was invented, but now seems like a weak argument. If we were to reinvent C today, would we do it this way, or can it be done better? Or maybe there's a deeper problem, that makes it hard to define consistent rules for such expressions, so it's best to forbid them? So suppose we were to reinvent C today. I'd like to suggest simple rules for expressions such as x=x++, which seem to me to work better than the existing rules. I'd like to get your opinion on the suggested rules compared to the existing ones, or other suggestions. Suggested Rules: Between sequence points, order of evaluation is unspecified. Side effects take place immediately. There's no undefined behavior involved. Expressions evaluate to this value or that, but surely won't format your hard disk (strangely, I've never seen an implementation where x=x++ formats the hard disk). Example Expressions x=x++ - Well defined, doesn't change x. First, x is incremented (immediately when x++ is evaluated), then it's old value is stored in x. x++ + ++x - Increments x twice, evaluates to 2*x+2. Though either side may be evaluated first, the result is either x + (x+2) (left side first) or (x+1) + (x+1) (right side first). x = x + (x=3) - Unspecified, x set to either x+3 or 6. If the right side is evaluated first, it's x+3. It's also possible that x=3 is evaluated first, so it's 3+3. In either case, the x=3 assignment happens immediately when x=3 is evaluated, so the value stored is overwritten by the other assignment. x+=(x=3) - Well defined, sets x to 6. You could argue that this is just shorthand for the expression above. But I'd say that += must be executed after x=3, and not in two parts (read x, evaluate x=3, add and store new value). What's the Advantage? Some comments raised this good point. It's not that I'm after the pleasure of using x=x++ in my code. It's a strange and misleading expression. What I want is to be able to understand complicated expressions. Normally, a complicated expression is no more than the sum of its parts. If you understand the parts and the operators combining them, you can understand the whole. C's current behavior seems to deviate from this principle. One assignment plus another assignment suddenly doesn't make two assignments. Today, when I look at x=x++, I can't say what it does. With my suggested rules, I can, by simply examining its components and their relations.

  Read the article

• Setting up your project

  - by ssoolsma

  Before any coding we first make sure that the project is setup correctly. (Please note, that this blog is all about how I do it, and incase i forget, i can return here and read how i used to do it. Maybe you come up with some idea’s for yourself too.) In these series we will create a minigolf scoring cart. Please note that we eventually create a fully functional application which you cannot use unless you pay me alot of money! (And i mean alot!)   1. Download and install the appropriate tools. Download the following: - TestDriven.Net (free version on the bottom of the download page) - nUnit TestDriven is a visual studio plugin for many unittest frameworks, which allows you to run  / test code very easily with a right click –> run test. nUnit is the test framework of choice, it works seamless with TestDriven.   2. Create your project Fire up visual studio and create your DataAccess project:  MidgetWidget.DataAccess is it’s name. (I choose MidgetWidget as name for the solution). Also, make sure that the MidgetWidget.DataAccess project is a c# ClassLibary Hit OK to create the solution. (in the above example the checkbox Create directory for solution is checked, because i’m pointing the location to the root of c:\development where i want MidgetWidget to be created.   3. Setup the database. You should have thought about a database when you reach this point. Let’s assume that you’ve created a database as followed: Table name: LoginKey Fields: Id (PK), KeyName (uniqueidentifier), StartDate (datetime), EndDate (datetime) Table name:  Party Fields: Id (PK), Key (uniqueidentifier, Created (datetime) Table name:  Person Fields: Id(PK),  PartyId (int), Name (varchar) Tablename: Score Fields: Id (PK), Trackid (int), PersonId (int), Strokes (int) Tablename: Track Fields: Id (PK), Name (varchar) A few things to take note about the database setup. I’ve singularized all tablenames (not “Persons“ but “Person”. This is because in a few minutes, when this is in our code, we refer to the database objects as single rows. We retrieve a single Person not a single “Persons” from the database.   4. Create the entity framework In your solution tree create a new folder and call it “DataModel”. Inside this folder: Add new item –> and choose ADO.NET Entity Data Model. Name it “Entities.edmx” and hit  “Add”. Once the edmx is added, open it (double click) and right click the white area and choose “Update model from database…". Now, point it to your database (i include sensitive data in the connectionstring) and select all the tables. After that hit “Finish” and let the entity framework do it’s code generation. Et Voila, after a few seconds you have set up your entity model. Next post we will start building the data-access! I’m off to the beach.

  Read the article

• On a BPM Mission with Process Accelerators. Part 1: BPM as an ATV

  - by Cesare Rotundo

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Part 1: BPM as an ATV It’s always exciting to talk to customers that are in the middle of a BPM transformational journey. Their thirst for new processes to improve with BPM makes them explorers in a landscape of opportunities. They have discovered that with BPM the can “go places” they couldn’t reach before. In a way, learning how to generate value with BPM is like adopting a new mean of transportation. Apps are like regular cars: very efficient, but to be used on paved roads: the road/process has been traced, and there are fixed paths to follow to get from “opportunity to quote” or from “quote to cash”. Getting off the road is risky, and laying down new asphalt is slow and expensive. Custom development is like running: you can go virtually anywhere, following any path you like, yet it’s slow, and a lot of sweat. BPM allows you to go “off the beaten path” laid out by packaged apps, yet make fast progress compared to custom development. BPM is therefore more like an All-Terrain Vehicle (ATV): less efficient than a car, but much faster than running, with a powerful enough engine that can get you places. The similarities between BPM and ATVs don’t stop here: you must learn to ride it even if you already know how to drive a car; you can reach places but figuring out the path to your destination is harder. Ultimately, with BPM as with an ATV, you reach places that you thought you could never reach, and you discover new destinations that provide great benefit to you … and that you didn’t even know existed! That’s where the sense of accomplishment that we heard from our BPM customers comes from, as well as the desire to share their experience, or even, as in the case of a County, the willingness to contribute their BPM solutions to help other agencies that face the same challenges. The question we wanted to answer is how can we teach organizations to drive ATV/BPM, thus leading them to deeper success with BPM, while increasing their awareness of the potential for reaching new targets, and finally equip them with the right tools. Like with ATVs, getting from point A to point B is more of a work of art than cruising on the highway by car. There is a lot we can do: after all many sought after destinations are common: someone else has been on the same path before. If only you could learn from their experience …

  Read the article

• Apache config that uses two document roots based on whether the requested resource exists in the first [closed]

  - by mattalexx

  Background I have a client site that consists of a CakePHP installation and a Magento installation: /web/example.com/ /web/example.com/app/ <== CakePHP /web/example.com/app/webroot/ <== DocumentRoot /web/example.com/app/webroot/store/ <== Magento /web/example.com/config/ <== Site-wide config /web/example.com/vendors/ <== Site-wide libraries The server runs Apache 2.2.3. The problem The whole company has FTP access and got used to clogging up the /web/example.com/, /web/example.com/app/webroot/, and /web/example.com/app/webroot/store/ directories with their own files. Sometimes these files need HTTP access and sometimes they don't. In any case, this mess makes my job harder when it comes to maintaining the site. Code merges, tarring the live code, etc, is very complicated and usually requires a bunch of filters. Abandoned solution At first, I thought I would set up a new subdomain on the same server, move all of their files there, and change their FTP chroot. But that wouldn't work for these reasons: Firstly, I have no idea (and neither do they remember) what marketing materials they've sent out that contain URLs to certain resources they've uploaded to the server, using the main domain, and also using abstract subdomains that use the main virtual host because it has ServerAlias *.example.com. So suddenly having them only use static.example.com isn't feasible. Secondly, The PHP scripts in their projects are potentially very non-portable. I want their files to stay in as similar an environment as they were built as I can. Also, I do not want to debug their code to make it portable. Half-baked solution After some thought, I decided to find a way to section off the actual website files into another directory that they would not touch. The company's uploaded files would stay where they were. This would ensure that I didn't break any of their projects that needed HTTP access. It would look something like this: /web/example.com/ <== A bunch of their files are in here /web/example.com/app/webroot/ <== 1st DocumentRoot; A bunch of their files are in here /web/example.com/app/webroot/store/ <== Some more are in here /web/example.com/site/ <== New dir; Contains only site files /web/example.com/site/app/ <== CakePHP /web/example.com/site/app/webroot/ <== 2nd DocumentRoot /web/example.com/site/app/webroot/store/ <== Magento /web/example.com/site/config/ <== Site-wide config /web/example.com/site/vendors/ <== Site-wide libraries After I made this change, I would not need to pay attention to anything except for the stuff within /web/example.com/site/ and my job would be a lot easier. I would be the only one changing stuff in there. So here's where the Apache magic would happen: I need an HTTP request to http://www.example.com/ to first use /web/example.com/app/webroot/ as the document root. If nothing is found (no miscellaneous uploaded company projects are found), try finding something within /web/example.com/site/app/webroot/. Another thing to keep in mind is, the site might have some problems if the $_SERVER['DOCUMENT_ROOT'] variable reads /web/example.com/app/webroot/ but the actual files are within /web/example.com/site/app/webroot/. It would be better if the DOCUMENT_ROOT environment variable could be /web/example.com/site/app/webroot/ for anything within the /web/example.com/site/app/webroot/ directory. Conclusion Is my half-baked solution possible with Apache 2.2.3? Is there a better way to solve this problem?

  Read the article

• Customer Loyalty vs. Customer Engagement: Who Cares?

  - by Jeb Dasteel-Oracle

  Have you read the recent Forbes OracleVoice blog titled Customer Loyalty is Dead. Long Live Engagement!? If you haven’t, take a look. This article prompted lots of conversation in the social realm. Many who read the article voiced their reactions to the headline and now I’m jumping in to add my view. Normal 0 false false false EN-US X-NONE X-NONE Customer loyalty is still key. It’s the effect and engagement is the cause. We at least know that to be true for our customers. We are in an age where customers are demanding to be heard. We need them to be actively involved – or engaged – as well. Greater levels of customer engagement, properly targeted, positively correlate with satisfaction. Our data has shown us this over and over. Satisfied customers are more loyal and more willing to vocalize their satisfaction through referencing, and are more likely to purchase again, all of which in turn drives incremental revenue – from the customer doing the referencing AND the customer on the receiving end of that reference. Turning this around completely, if we begin to see the level of a customer’s engagement start to wane, this is an indicator that their satisfaction, loyalty, and future revenue are likely at risk. At Oracle, we’ve put in place many programs to target, encourage, and then track engagement, allowing us to measure engagement as a determinant of loyalty. Some of these programs include our Key Accounts, solution design and architectural, Executive Sponsorship, as well as executive advisory boards. Specific programs allow us to engage specific contacts within specific customer organizations (based on role) and then systematically track their engagement activities over time, along side of tracking customer satisfaction, loyalty, referenceability, and incremental revenue contribution. Continuous measurement of engagement allows us to better understand customer views of what it means to partner with a provider and adjust program participation to better meet the needs of the partnership. We can also track across customer segments, and design new programs that are even more effective than the ones we have in place today. In case you missed any of my previous Forbes articles, I’ve included links below for easy access. Award-Winning Companies Put Customers First The Power of Peer Networks: 5 Reasons to Get (and Stay) Involved Technology At Work: Traveling In Style Customer Central: 8 Strategies for Putting Customers at the Core of Your Business Technology at Work: Five Companies Doing IT Right /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Selective Suppression of Log Messages

  - by Duncan Mills

  Those of you who regularly read this blog will probably have noticed that I have a strange predilection for logging related topics, so why break this habit I ask?  Anyway here's an issue which came up recently that I thought was a good one to mention in a brief post.  The scenario really applies to production applications where you are seeing entries in the log files which are harmless, you know why they are there and are happy to ignore them, but at the same time you either can't or don't want to risk changing the deployed code to "fix" it to remove the underlying cause. (I'm not judging here). The good news is that the logging mechanism provides a filtering capability which can be applied to a particular logger to selectively "let a message through" or suppress it. This is the technique outlined below. First Create Your Filter  You create a logging filter by implementing the java.util.logging.Filter interface. This is a very simple interface and basically defines one method isLoggable() which simply has to return a boolean value. A return of false will suppress that particular log message and not pass it onto the handler. The method is passed the log record of type java.util.logging.LogRecord which provides you with access to everything you need to decide if you want to let this log message pass through or not, for example  getLoggerName(), getMessage() and so on. So an example implementation might look like this if we wanted to filter out all the log messages that start with the string "DEBUG" when the logging level is not set to FINEST:  public class MyLoggingFilter implements Filter {     public boolean isLoggable(LogRecord record) {         if ( !record.getLevel().equals(Level.FINEST) && record.getMessage().startsWith("DEBUG")){          return false;            }         return true;     } } Deploying   This code needs to be put into a JAR and added to your WebLogic classpath.  It's too late to load it as part of an application, so instead you need to put the JAR file into the WebLogic classpath using a mechanism such as the PRE_CLASSPATH setting in your domain setDomainEnv script. Then restart WLS of course. Using The final piece if to actually assign the filter.  The simplest way to do this is to add the filter attribute to the logger definition in the logging.xml file. For example, you may choose to define a logger for a specific class that is raising these messages and only apply the filter in that case.  <logger name="some.vendor.adf.ClassICantChange"         filter="oracle.demo.MyLoggingFilter"/> You can also apply the filter using WLST if you want a more script-y solution.

  Read the article

• New PeopleSoft HCM 9.1 On Demand Standard Edition provides a complete set of IT services at a low, predictable monthly cost

  - by Robbin Velayedam

  At Oracle Open World last month, Oracle announced that we are extending our On Demand offerings with the general availability of PeopleSoft On Demand Standard Edition. Standard Edition represents Oracle’s commitment to providing customers a choice of solutions, technology, and deployment options commensurate with their business needs and future growth. The Standard Edition offering complements the traditional On Demand offerings (Enterprise and Professional Editions) by focusing on a low, predictable monthly cost model that scales with the size of your business.   As part of Oracle's open cloud strategy, customers can freely move PeopleSoft licensed applications between on premise and the various  on demand options as business needs arise.    In today’s business climate, aggressive and creative business objectives demand more of IT organizations. They are expected to provide technology-based solutions to streamline business processes, enable online collaboration and multi-tasking, facilitate data mining and storage, and enhance worker productivity. As IT budgets remain tight in a recovering economy, the challenge becomes how to meet these demands with limited time and resources. One way is to eliminate the variable costs of projects so that your team can focus on the high priority functions and better predict funding and resource needs two to three years out. Variable costs and changing priorities can derail the best laid project and capacity plans. The prime culprits of variable costs in any IT organization include disaster recovery, security breaches, technical support, and changes in business growth and priorities. Customers have an immediate need for solutions that are cheaper, predictable in cost, and flexible enough for long-term growth or capacity changes. The Standard Edition deployment option fulfills that need by allowing customers to take full advantage of the rich business functionality that is inherent to PeopleSoft HCM, while delegating all application management responsibility – such as future upgrades and product updates – to Oracle technology experts, at an affordable and expected price. Standard Edition provides the advantages of the secure Oracle On Demand hosted environment, the complete set of PeopleSoft HCM configurable business processes, and timely management of regular updates and enhancements to the application functionality and underlying technology. Standard Edition has a convenient monthly fee that is scalable by number of employees, which helps align the customer’s overall cost of ownership with its size and anticipated growth and business needs. In addition to providing PeopleSoft HCM applications' world class business functionality and Oracle On Demand's embassy-grade security, Oracle’s hosted solution distinguishes itself from competitors by offering customers the ability to transition between different deployment and service models at any point in the application ownership lifecycle. As our customers’ business and economic climates change, they are free to transition their applications back to on-premise at any time. HCM On Demand Standard Edition is based on configurability options rather than customizations, requiring no additional code to develop or maintain. This keeps the cost of ownership low and time to production less than a month on average. Oracle On Demand offers the highest standard of security and performance by leveraging a state-of-the-art data center with dedicated databases, servers, and secured URL all within a private cloud. Customers will not share databases, environments, platforms, or access portals with other customers because we value how mission critical your data are to your business. Oracle’s On Demand also provides a full breadth of disaster recovery services to provide customers the peace of mind that their data are secure and that backup operations are in place to keep their businesses up and running in the case of an emergency. Currently we have over 50 PeopleSoft customers delegating us with the management of their applications through Oracle On Demand. If you are a customer interested in learning more about the PeopleSoft HCM 9.1 Standard Edition and how it can help your organization minimize your variable IT costs and free up your resources to work on other business initiatives, contact Oracle or your Account Services Representative today.

  Read the article

< Previous Page | 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611  | Next Page >