Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 162/232 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Laptop VGA Output Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Dell Studio XPS 16 Runs Hot

  - by dtbarne

  Specs: 1920x1080 i7 1.6 GHz quad core 6GB RAM 1GB ATI Radeon HD 6570M/5700 Series 500GB 7200rpm Hard Drive Love this laptop for many reasons, but it constantly runs hot (CPU is low 70s with basic tasks and often 80+ is not uncommon) and I'm finding it too much to deal with. The laptop feels very hot (almost too hot for a lap) and often gets so hot that the OS slows down or freezes altogether. I've tried cleaning it out and even replacing the thermal paste. I often use an external cooler, but it only helps 3-5 degrees and it's a pain to have to use. I've come to the conclusion that it just runs hot. I have two questions: What is to blame? The i7 processor, the gfx card, or is it just that this laptop has poor cooling? Does the Dell XPS 15 run cooler? I'm looking at replacing my current laptop, but I don't want to run into the same problem.

  Read the article

• How long to erase flash memory (RAID controller)?

  - by Rob Nicholson

  I made a bit of a boo boo last night in upgrading the BIOS in a Silicon Image Sil3132 eSATA adapter. It's a RAID controller in a server. I accidently flashed it with the wrong BIOS ;-) Not the end of the world as this card only cost £15 but I'm trying to flash it with the correct BIOS as it won't obviously work anymore. Silicon Image supply a DOS program for flashing and I thought I'd use the Erase function to get rid of the old BIOS. Any idea how long this should take? It's been sat at the "Erasing memory" prompt for about 15 minutes. Thanks, Rob.

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Unable to connect to network

  - by user33750

  Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

  Read the article

• Problem with blue-sceens

  - by Oystein

  Hi I have a problem with my computer. I get bluescreens a lot. I get different bluescreen-codes everytime, and this happens randomly. This can happen when I boot my computer, when I'm surfing on the internett, when I'm away from the computer and are logged out... I tried to disconnect everything that was connected to my computer, beside the monitor. That didn't help. I have reinstalled Windows, changed memory, changed video card, but nothing of this helped, I still get bluescreens. I guess the problem here is the mothercard, CPU or HDD. But I want your opinion before I order anything new to my computer. Can you tell me what the problem is?

  Read the article

• Is DevCon.exe still the best way to restart/power cycle USB ports after resuming from hibernation in

  - by ProfessionalAmateur

  I have a USB broadband card on my Windows 7 laptop. It loathes resuming from hibernation properly. Back in the XP days I would issue a call devcon.exe from the command prompt and restart the selected ports (Saves you having to manually unplug and plug back in your USB devices). Ive been trying this is Windows 7, but the UAC keeps getting in the way. I'll start a command prompt. Issue the devcon command, but UAC asks me if I really want to do this, when I click yes it opens a different command prompt and launches the command. After the command completed this new prompt window closes faster than the speed of light and I cannot see the results. So Im thinking there has to be a better way to do this in the Vista/Win7 world...?

  Read the article

• how to set static IP address in opensolaris

  - by pm100

  in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

• Why my AD domain doesn't work on my laptop

  - by Frederick Marcoux

  I have installed Windows Server 2008 R2 on a virtual machine with a bridged network card and installed Active Directory. I configured it and when I try to connect my laptop to the domain name, in this case, creationsmicroweb.ca (doesn't exist, don't try, for local only), I can't get connected. My laptop just doesn't see it. I don't know why! There's a resume of my config: Domain Name: creationsmicroweb.ca Forest: new, principal domain controller IP: Fixed (192.168.1.100) DNS Name: none (just for local, I ignored them) NETBIOS name: MICROWEB If someone as found why, please help me! This is for my business that I'm starting and I can't find why it doesn't work!

  Read the article

• How to solve my black screen at boot?

  - by Juanillo

  I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

  Read the article

• How can I use 2 monitors plus laptop with my Dell e6420 w/ Nvidia nvs 4200m

  - by KallDrexx

  I have just hooked up a 2nd external monitor to my Dell e6420 laptop with a Nvidia NVS 4200m graphics card, running Windows 8 64 bit. However, the computer won't let me have both monitors and the laptop display active at the same time. I installed the latest Nvidia graphics drivers (310.70) but it claims that my GPU can only support up to 2 monitors. Nivdia's website implies differently (as does various other laptops around the office). The monitors are connected both via DVI to my dell docking station that has multiple DVI ports. Both monitors are working correctly, I just can't get all 3 working together. Attempting to download the driver from dell fails, as their driver installer is broken apparently Any ideas?

  Read the article

• Laptop monitor goes black under intense graphics

  - by drahcir

  I have a dell inspiron 1520 with a nvidia GeForce 8600M GT video card. I have Windows 7 professional as an operating system. Yesterday when I was using it the screen started to somewhat flicker then go completely black. I restarted it and in the boot screen everything seems fine, when I entered the login screen it became flickery again, and when I logged in, when a couple of windows popped up it went black again. I hooked it up to a tft monitor and the monitor works fine, and did some more tests that confirmed that under higher graphics causes the laptop monitor to go black. Is there a reason why this is happening?

  Read the article

• Windows XP install driver notification for AirCard

  - by Brian

  A co-worker of mine is using an air-card. It prompted him to install software in the notification tray, but he clicked on the wrong thing and the icon went away without him installing that software. How can I get that icon back? He can't install the software then. I know that you can download the software from the site, but we did that and were having issues from that too. Restarting and trying again doesn't pop up the notification either. Thanks.

  Read the article

• Using Windows 7 XP Mode for games

  - by Josefvz

  Hi all. I have Win 7 (x64) at home and I want to play some old games (specifically Lands of Lore 3, but also some others). This game does not work properly on Win 7, and there are no patches that I'm aware of to fix its issues. Can I use XP Mode to play this game (and other non Win 7 nice games), or is there a better way? I only have one PC and dual booting scares me... (so no to dual booting!) Another question: Will I have full hardware support (full use of my graphics card, etc) when I use DOSbox or a VM? I have decided to go with VirtualBox or vmware, I'll check which one gives the best performance, thanks for your input!

  Read the article

• nvidia twinview in ubuntu with large resolutions not working

  - by knittl

  i bought an external monitor and can't get it to work properly with my laptop screen. my laptop screen has a resolution of 1920x1200 and the new monitor has 1920x1080 when i open nvidia-settings and select the maximum resolution for each of the screen, one screen will always stay blank. if i select a smaller resolution for one of the two it will work. 1920x1200 + 1440x900 = works 1680x1050 + 1920x1080 = works 1920x1200 + 1920x1080 = doesn't work (but that's what i want to have!) my graphics card is an 01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 360M (rev a1) (output from lspci), driver is proprietary nvidia driver, operating system is ubuntu. any help greatly apreciated

  Read the article

• Split internal USB pinouts - is it possible?

  - by TM

  I've currently got a situation in my PC where I have 3 devices that connect to the motherboard via the onboard USB pinouts. The problem is, I only have two sets of USB pinouts on my motherboard. Is there any way of connecting two devices to one set of pinouts? Essentially, I'm looking for the functionality of a USB hub, but I'd like it to be inside the case, and provide pinouts rather than regular USB ports. Update: I don't need any more USB ports, I have devices that use the USB pinouts. I already have extra USB ports that aren't used, so adding an PCI USB card doesn't really help anything.

  Read the article

• How can I take browser screenshots at a higher resolution than my browser supports?

  - by Joshua Carmody

  I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 4000x3000 pixels. My laptop's screen has a native resolution of 1400x768. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work?

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• What disk setup is needed / best practice for hypervisor-only servers?

  - by Luke404

  Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

  Read the article

• Windows 7 Line In Delay Issue

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• What are the cheap CDN for Origin Pull?

  - by DucDigital

  I've read several thread around ServerFault about this, but still I am not satisfy with the answer so I post a question here. I need a Origin Pull CDN that support big file (more than 200MB). I don't need a storage place since they are too small, just to relay the server. Also the price should be afforable, ofcourse not more than 150$ a month for their smallest plan. I also need to pay by credit card since I do not work or stays in the US so it's hard for me to do a bank wire. Thank you very much

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• Configuring NVIDIA Quadro with Dell Precision M4600

  - by vsecades

  After a frustrating couple of weeks when I recently bought my Dell Precision laptop, I managed to fix an issue where Ubuntu (yes, was NOT using Windows, get serious) would not recognize the video card and would cause all sorts of problems all over the place. I ended up one Saturday morning nearly throwing this thing away, when I managed to find a post about NVIDIA Optimus technology... ( http://www.pcmag.com/article2/0,2817,2358963,00.asp ). Now I am a huge advocate of disruptive new stuff, as long as we keep the broader audience in mind. Anyhow, disabling this (which as the BIOS settings state only work on Windows 7 or later), effectively allow the NVIDIA based Ubuntu driver to kick in full force. No need for a trash can anymore thankfully. As I saw multiple posts all over the place about this, check your BIOS, disable and try the video again to see if this corrects your issues. Best of luck!

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >