Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 164/232 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Colored blocks on boot

    - by stackzerad
    When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

    Read the article

  • USB forwarding from dom0 to domU

    - by Karolis T.
    What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

    Read the article

  • Areca 1880ix RAID hangs

    - by Dave
    Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

    Read the article

  • Wrong screen resolution with HDMI output to HDTV

    - by bruno077
    I own an HDTV with a native resolution of 1360x768. Sometimes I plug in my laptop to watch movies, and I used to do it with a VGA cable. I've had no problem setting the laptop to the TV native resolution with the VGA cable (1360x768). Having acquired an HDMI cable recently, I can't go past 1280x720, and if I do, the TV displays "invalid format". At 1280x720, the image is viewable but not centered, so for example I can't see the windows taskbar or titlebars. I've tried both cables (VGA and HDMI) with the same settings: Laptop's display turned off and trying to set the Tv's native resolution. What could I try to fix this issue? Could it be a faulty cable? (I'm using a Thinkpad with Windows 7) EDIT: My graphics adapter appears listed as Mobile Intel(R) 4 Series Express Chipset Family (Searching for my laptop's model yields Intel GMA 4500MHD as the graphic card) I'm downloading a driver update from Intel's website. I'll report my progress when I check its behavior tomorrow.

    Read the article

  • Removing (Presumably) Extraneous Network Adapters from Device Manager (eg WAN Miniport)

    - by Synetech inc.
    Can anyone shed some light on the default items in the Network Adapters branch of the Windows Device Manager? In addition to the network card, there are always a bunch of other things that I cannot find any useful information on such as RAS Asynch Adapter and all the WAN Miniports (IKEv2, IP(v6), L2TP, Network Monitor, PPPOE, PPTP, SSTP). I would like to trim it down and uninstall whatever possible but cannot find out exactly what these items are responsible for (and therefore whether or not they are needed on my system). Most of the pages found with Google are either people trying to fix an error with such an item or someone asking what it is and being given an unhelpful, pat response like “just leave them alone” or “they’re necessary”. I highly doubt that is the case and I’m certain that at least some items can be removed because even if they become necessary in the future they can be added again (for example installing Network Monitor or Protowall reinstalls the miniport drivers anyway).

    Read the article

  • Unable to diagnose Windows 7 lockup

    - by Delyan
    Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

    Read the article

  • System freezes for 5 seconds when seeking in or skipping to songs and videos

    - by pragmatick
    When I start playing a new video or MP3 or skip to a time when playing them, my system hangs for a couple of seconds. A restart solves this problem, but only for a while. It does not matter which player I use (VLC, Media Player, Winamp, Zoom Player), which media files or if they are located on a network drive or on the local hard drive. Everything else works flawlessly and after the playing has started, there are not problems - until I switch to another file. Additionally, when the Winamp playlist continues to the next song, the system does not hang. When I skip to the next song manually, the system hangs. I've been using Windows XP for years and consider myself a fairly professional windows user, but I have no idea what could cause this. Dual-core 2Ghz, 2GB RAM, Windows XP SP3, Audigy card with kxproject. Worked flawlessly for years. Would be glad if anyone could help.

    Read the article

  • Different graphic cards drivers while booting from external media

    - by goran
    I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

    Read the article

  • Power Supply Not Working?

    - by Mr.Glass
    So I recently made some purchases for a new computer including: Motherboard: Gigabyte GA-EP45-UD3R CPU : Intel Core2Quad 2.66Ghz Power Supply: Antec Basiq 500w UPDATE: I got the Power Supply working, the motherboard's lights come on, the video card fan spins, BUT the CPU fan does NOT spin and there is no video. Whats the possibility of lacking power? In the mobo guide it says the use of a power supply providing a 2x4 12V connector is recommended (I do not have this connector) by the CPU manufacturer when using an Intel Extreme Edition (I'm using Core2Quad) UPDATE: Got it working, intstalling windows 7 now. THANKS GUYS!!

    Read the article

  • New entries on the GRUB

    - by Kiewic
    Hello. I updated my Ubuntu, and after that there were two new lines on my GRUB screen. Ubuntu 9.04, kernel 2.6.28-16-generic Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) Ubuntu 9.04, kernel 2.6.28-11-generic Ubuntu 9.04, kernel 2.6.28-11-generic (recovey mode) Ubuntu 9.04, memtest86+ Other operating systems: Microsoft Windows XP Home Edition Do I have two kernels installed? Do the old entries are still useful? Each kernel takes up space? :P And that's not all, when a get into the old version of Ubuntu, the wireless card stops working on any Ubuntu version until I get into Windows and then go back to Ubuntu. Thanks for your help.

    Read the article

  • Superscope DHCP leases and configuration set up

    - by Vdub
    Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

    Read the article

  • What is the advantage of iSCSI over SMB?

    - by sofakng
    At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

    Read the article

  • How to host multiple subdomain on another server

    - by Azrim
    Hi all, I have one webserver and one Application server. Webserver1 have FreeBSD 8.1, Apache, MySQL and PHP. Application1 server have Centos 5.5, Apache, Mysql and PHP. Both server running fine independently. My webserver1 is hosting my company website www.azrim.com which running good. Besides I have 2 online application which requires me to host them as a subdomains. My questions is I want to make subdomains such as abc.azrim.com and xyz.azrim.com is accesscible from Application1 server. Can anyone pls help me on this. What should I do on apaches configuration on both webserver1 and Apps1 server. I only have 1 NIC card on my Apps1 server. Really appreciate anyone who got the solution. Thanks Azrim

    Read the article

  • Missing Right Click Menu Text After Sleep

    - by petebob796
    I have a laptop running Windows 7 and regularly close the lid to put it in sleep mode. Recently after resuming from sleep if I go to access the right click menu in the windows shell when I hover over the menu items the text disappears and doesn't re-appear without closing the menu and right clicking again. The only way to fix this is to restart. Any ideas what could be causing this? I have an nvidia 8600m gs graphics card which had a BSOD problem a while back at boot up but since I underclocked it slightly it has been running fine and I experience no other issues but this. This only affects right click menus that are part of the windows so not any programs right click menu. It's not a major problem just strange and a little annoying.

    Read the article

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • dell studio 1558 multi touchpad multi finger problem

    - by christian130
    Recently I bought an Intel Core i7 Dell laptop fully integrated. I have an ATi Radeon 1 gb ram graphic card and so on. Everything works fine even the brightness, but when I try the multi touch multi finger(touchpad which enables two or more finger) the pointer jump and go there and go here and so It's very annoying because when I'm trying to write this question I cannot let the pointer be cool! when I accidentally the touchpad it is very annoying. How can I fix this ?

    Read the article

  • Nvidia 9 series or Intel HD 2000? [closed]

    - by EApubs
    I just tested an Nvidia 9300 GS card with a Intel Corei3 HD 2000 graphics system. Here is the windows experience index scores I got : Nvidia 9300 GS : Base Score 3.9 Processor : 7.1 Memory : 7.5 Graphics : 3.9 Gaming Graphics : 5.1 Hard Disk : 5.9 Intel HD 2000 : Base Score : 5.2 Processor : 7.1 Memory : 5.9 Graphics : 5.2 Gaming Graphics : 5.8 Hard Disk : 5.9 My questions are : When using Intel HD graphics, it reduces the score of my Ram! How is that possible? It checks the speed of the ram. Not the size (i think). Intel graphics take some of the ram space but how can that effect the speed? From both of them, what will be the good choice?

    Read the article

  • NVIDIA Driver Crashing on Custom-Built Windows 7 PC

    - by srunni
    I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

    Read the article

  • Configure Ubuntu9.10 to see hardware of my laptop

    - by michael
    I have installed Ubuntu 9.10 on my laptop. But it can't see all the hardware of the laptop. I would like some help. my laptop has 8G (in Windows7), but Ubuntu only see 2.9G (I get this value from System Monitor under Resource tab my laptop can have 1600x900 resolution (it works in Windows7), but i can only set to 1280x800 in Ubunutu my wireless card does not work. But my wired connection works. Can you please help me in configuring my Ubuntu environment?

    Read the article

  • Windows 8 gives "system thread exception not handled" after update

    - by Shobhit
    I have a 64-bit dell laptop which I recently upgraded from Windows 7 to Windows 8. Since then, it's creating a havoc in my life. The metro apps are not working; the system crashes once in a while and none of my games are running because I don't have the correct drivers for my graphics card (ATI 5000 series). Some days back, Windows downloaded an update and prompted me to restart. After that day, whenever I log in and fire up my desktop, I get all kinds of blue screen errors. The most common one looks something like this: - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Please help me with how I can fix this, optionally how to go back to windows 7. Thanks.

    Read the article

  • VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

    - by Chris Miller
    Firstly, is this possible? The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual server with one network card running windows server 2008r2. I need to set up a site-to-site style VPN using IPsec between the firewall of one ISP and the windows host on the other (gateway-to-host). This host has to run a SQL-Server that I can access from the other ISP's servers through the VPN tunnel. It seems looking at the RFC for IPsec that this should be possible using the features of Windows 2008, but I can't get it to work so far... It seems that I can't access any services running on the same computer or IP address used as the tunnel endpoint? Thanks Chris

    Read the article

  • Flow of packets in network

    - by user58859
    I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

    Read the article

  • How to make condition inside getView of Custom BaseAdapter

    - by user1501150
    I want to make a Custom ListView with Custom BaseAdapter, where the the status=1,I want to show a CheckBox, and else I want to show a textView.. My given condition is: if (NewtheStatus == 1) { alreadyOrderText .setVisibility(TextView.GONE); } else{ checkBox.setVisibility(CheckBox.GONE); } But Some times I obtain some row that has neither checkBox nor TextView. The Code of my Custom BaseAdapter is given below . private class MyCustomAdapter extends BaseAdapter { private static final int TYPE_ITEM = 0; private static final int TYPE_ITEM_WITH_HEADER = 1; // private static final int TYPE_MAX_COUNT = TYPE_SEPARATOR + 1; private ArrayList<WatchListAllEntity> mData = new ArrayList(); private LayoutInflater mInflater; private ArrayList<WatchListAllEntity> items = new ArrayList<WatchListAllEntity>(); public MyCustomAdapter(Context context, ArrayList<WatchListAllEntity> items) { mInflater = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); } public void addItem(WatchListAllEntity watchListAllEntity) { // TODO Auto-generated method stub items.add(watchListAllEntity); } public View getView(int position, View convertView, ViewGroup parent) { View v = convertView; final int position1 = position; if (v == null) { LayoutInflater vi = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); v = vi.inflate(R.layout.listitempict, null); } watchListAllEntity = new WatchListAllEntity(); watchListAllEntity = items.get(position); Log.i("position: iteamsLength ", position + ", " + items.size()); if (watchListAllEntity != null) { ImageView itemImage = (ImageView) v .findViewById(R.id.imageviewproduct); if (watchListAllEntity.get_thumbnail_image_url1() != null) { Drawable image = ImageOperations(watchListAllEntity .get_thumbnail_image_url1().replace(" ", "%20"), "image.jpg"); // itemImage.setImageResource(R.drawable.icon); if (image != null) { itemImage.setImageDrawable(image); itemImage.setAdjustViewBounds(true); } else { itemImage.setImageResource(R.drawable.iconnamecard); } Log.i("status_ja , status", watchListAllEntity.get_status_ja() + " ," + watchListAllEntity.getStatus()); int NewtheStatus = Integer.parseInt(watchListAllEntity .getStatus()); CheckBox checkBox = (CheckBox) v .findViewById(R.id.checkboxproduct); TextView alreadyOrderText = (TextView) v .findViewById(R.id.alreadyordertext); if (NewtheStatus == 1) { alreadyOrderText .setVisibility(TextView.GONE); } else{ checkBox.setVisibility(CheckBox.GONE); } Log.i("Loading ProccardId: ", watchListAllEntity.get_proc_card_id() + ""); checkBox.setOnCheckedChangeListener(new OnCheckedChangeListener() { public void onCheckedChanged(CompoundButton buttonView, boolean isChecked) { WatchListAllEntity watchListAllEntity2 = items .get(position1); Log.i("Position: ", position1 + ""); // TODO Auto-generated method stub if (isChecked) { Constants.orderList.add(watchListAllEntity2 .get_proc_card_id()); Log.i("Proc Card Id Add: ", watchListAllEntity2 .get_proc_card_id() + ""); } else { Constants.orderList.remove(watchListAllEntity2 .get_proc_card_id()); Log.i("Proc Card Id Remove: ", watchListAllEntity2.get_proc_card_id() + ""); } } }); } } return v; } private Drawable ImageOperations(String url, String saveFilename) { try { InputStream is = (InputStream) this.fetch(url); Drawable d = Drawable.createFromStream(is, "src"); return d; } catch (MalformedURLException e) { return null; } catch (IOException e) { return null; } } public Object fetch(String address) throws MalformedURLException, IOException { URL url = new URL(address); Object content = url.getContent(); return content; } public int getCount() { // TODO Auto-generated method stub int sizef=items.size(); Log.i("Size", sizef+""); return items.size(); } public Object getItem(int position) { // TODO Auto-generated method stub return items.get(position); } public long getItemId(int position) { // TODO Auto-generated method stub return position; } }

    Read the article

  • some websites not opening completely

    - by mkk
    Hi everybody, I am using bsnl broadband connection, modem: wa3002g1 os: xp(86x) / vista(64x) A few days back I have changed the modem (don't know the previous modem no) because of some issues. since then I am not able to open most of the websites in firefox, IE6/8, chrome, opera. If i connect with other network like reliance data card, those websites are opening, if i connect bsnl the problem will be same again. I called to customer care many times, but no use. Please help me to find the solution. Thank you in advance.

    Read the article

  • Can't change picture import settings in Windows 7

    - by Joel in Gö
    I have foolishly set the picture import settings wrongly for when a camera card is put in my computer. It correctly asks me whether I would like to import the pictures using Windows picture import, and when I click on this option it flashes up the "import pictures" dialog very briefly, and then immediately gets on with importing the pictures to the wrong place. I simply want to click on the "import settings" link on the dialog - but it's too quick for me, and even if I do manage it it just ignores me. Windows Help, useful as ever, tells me to click on the link :) Any ideas? Thanks!

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >