Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 164/609 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Microsoft Cluster or Oracle Fail Safe error

    - by osdm
    Trying to get Oracle Database 10g to work on Microsoft cluster (using Oracle Fail Safe, not RAC). Everything installed, but when trying to verify group or add database to group I get following error: FS-10220: Network name MSK00-NST01-1 maps to IP address 10.1.11.74 in the cluster resource but maps to IP address 10.1.1.74 on the system MSK00-NST01-1 is cluster name, 10.1.11.74 is first node IP, 10.1.1.74 is second node IP. Oracle documentation says "The cluster and the system must have the same IP address mapping for a network name. Check that either the network name server or the local host file has the same IP address mapping as the cluster." Where is the error - in Oracle configuration or in cluster configuration? What are possible ways to correct it? Thanks a lot for any ideas.

    Read the article

  • I just got a linode VPS a week ago and I've been flagged for SSH scanning...

    - by meder
    I got a 32-bit Debian VPS from http://linode.com and I really haven't done any sort of advanced configuration for securing it ( port 22; password enabled ). It seems somehow there is ssh scanning going on from my IP, I'm being flagged as this is against the TOS. I've been SSHing only from my home Comcast ISP which I run Linux on. Is this a common thing when getting a new vps? Are there any standard security configuration tips? I'm quite confused as to how my machine has been accused of this ssh scanning.

    Read the article

  • Running NginX (with Apache) and cPanel/WHM

    - by ub3rst4r
    I was wondering if its a good idea to be running NginX as the webserver (on port 80) and Apache as the reverse proxy (on port 8080) with cPanel/WHM being used as a control panel? I also installed Nginx Admin so the configuration for NginX is managed by WHM. The reason I am asking is because I came across an article (http://kbeezie.com/view/apache-with-nginx/) which explains how to setup Apache as a reverse proxy but it states If you are using a control panel based hosting such as cpanel/whm, this method is not advised. Most of the servers configuration is handled automatically in those cases, and making manual changes will likely lead to problems (plus you won’t get support from the control panel makers or your hosting provider in most cases). Anyone have any past experiences with this and can say if its good/bad idea?

    Read the article

  • Munin Aggregate Graphs from several servers

    - by Sparsh Gupta
    I am using DNS round robin load balancing and have divided my total traffic onto multiple servers. Each server does around 300-400req/second but I am interested in having an aggregate graph telling me the TOTAL of all requests per second served by our architecture. Is there any way I can do this. Right now each graph in Munin comes as a separate graph as they depict things on one server. I am using configuration as follow which doesn't work doesnt work for me, does this configuration got errors? [TRAFFIC.AGGREGATED] update no requests.graph_title nGinx requests requests.graph_vlabel nGinx requests per second requests.draw LINE2 requests.graph_args --base 1000 requests.graph_category nginx requests.label req/sec requests.type DERIVE requests.min 0 requests.graph_order output requests.output.sum \ lb1.visualwebsiteoptimizer.com:nginx_request_lb1.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb2.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb3.visualwebsiteoptimizer.com_request.request

    Read the article

  • Setting up Tornado with Nginx on Ubuntu 10.04 for production use

    - by DjangoRocks
    Hi all, I understand that there's an nginx configuration file at http://www.friendfeed.com But i don't really know how to set up Tornada for production use on Ubuntu 10.04 with Nginx. Here's my situation and assumptions: 1) Assuming my Tornado project is set up as such: project/ src/ static/ templates/ project.py And I have installed Tornado by downloading the repositary from Github and than sudo python setup.py install 2) I've installed Nginx and started it based on the instructions here : http://library.linode.com/web-servers/nginx/installation/ubuntu-10.04-lucid My questions are: Where does my nginx configuration file go ? Within the src/ folder? After configuring Nginx, how do I start my Tornado project?

    Read the article

  • Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

    - by Charles Long
    I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

    Read the article

  • Nginx Proxying to Multiple IP Addresses for CMS' Website Preview

    - by Matthew Borgman
    First-time poster, so bear with me. I'm relatively new to Nginx, but have managed to figure out what I've needed... until now. Nginx v1.0.15 is proxying to PHP-FPM v.5.3.10, which is listening at http://127.0.0.1:9000. [Knock on wood] everything has been running smoothly in terms of hosting our CMS and many websites. Now, we've developed our CMS and configured Nginx such that each supported website has a preview URL (e.g. http://[WebsiteID].ourcms.com/) where the site can be, you guessed it, previewed in those situations where DNS doesn't yet resolve to our server, etc. Specifically, we use Nginx's Map module (http://wiki.nginx.org/HttpMapModule) and a regular expression in the server_name of the CMS' server{ } block to 1) lookup a website's primary domain name from its preview URL and then 2) forward the request to the "matched" primary domain. The corresponding Nginx configuration: map $host $h { 123.ourcms.com www.example1.com; 456.ourcms.com www.example2.com; 789.ourcms.com www.example3.com; } and server { listen [OurCMSIPAddress]:80; listen [OurCMSIPAddress]:443 ssl; root /var/www/ourcms.com; server_name ~^(.*)\.ourcms\.com$; ssl_certificate /etc/nginx/conf.d/ourcms.com.chained.crt; ssl_certificate_key /etc/nginx/conf.d/ourcms.com.key; location / { proxy_pass http://127.0.0.1/; proxy_set_header Host $h; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } (Note: I do realize that the regex in the server_name should be "tighter" for security reasons and match only the format of the website ID (i.e. a UUID in our case).) This configuration works for 99% of our sites... except those that have a dedicated IP address for an installed SSL certificate. A "502 Bad Gateway" is returned for these and I'm unsure as to why. This is how I think the current configuration works for any requests that match the regex (e.g. http://123.ourcms.com/): Nginx looks up the website's primary domain from the mapping, and as a result of the proxy_pass http://127.0.0.1 directive, passes the request back to Nginx itself, which since the proxied request has a hostname corresponding to the website's primary domain name, via the proxy_set_header Host $h directive, Nginx handles the request as if it was as direct request for that hostname. Please correct me if I'm wrong in this understanding. Should I be proxying to those website's dedicated IP addresses? I tried this, but it didn't seem to work? Is there a setting in the Proxy module that I'm missing? Thanks for the help. MB

    Read the article

  • Why doesn't Firefox cache my images and CSS

    - by Richard A
    I am using IIS7, I have already set up the following. But when I run Firefox it seems not to cache any of my images even with "remember history" set. <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <staticContent> <clientCache cacheControlCustom="public" cacheControlMode="UseMaxAge" cacheControlMaxAge="7.00:00:00" /> </staticContent> </system.webServer> </configuration> However when I use Firebug it still points to Firefox not caching images and CSS: public,max-age=604800 Content-Type text/css Content-Encoding gzip Last-Modified Mon, 27 Jun 2011 03:53:22 GMT Accept-Ranges bytes Etag "507968c27d34cc1:0" Vary Accept-Encoding Server Microsoft-IIS/7.5 X-Powered-By ASP.NET Date Mon, 27 Jun 2011 13:06:41 GMT Content-Length 5067 Request Headersview source Host www.xx.com User-Agent Mozilla/5.0 (Windows NT 6.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 Accept text/css,*/*;q=0.1 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip, deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.xx.com/ Cookie __utma=62996397.135679654.1309106351.1309159743.1309164158.8; __utmz=62996397.1309106351.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); __utmc=62996397

    Read the article

  • Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

    - by sxanness
    I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

    Read the article

  • One EC2 source with distributed varnish machines

    - by Elad Lachmi
    I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

    Read the article

  • Why doesn't Firefox cache my images and CSS

    - by Richard A
    I am using IIS7, I have already set up the following. But when I run Firefox it seems not to cache any of my images even with "remember history" set. <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <staticContent> <clientCache cacheControlCustom="public" cacheControlMode="UseMaxAge" cacheControlMaxAge="7.00:00:00" /> </staticContent> </system.webServer> </configuration> However when I use Firebug it still points to Firefox not caching images and CSS: public,max-age=604800 Content-Type text/css Content-Encoding gzip Last-Modified Mon, 27 Jun 2011 03:53:22 GMT Accept-Ranges bytes Etag "507968c27d34cc1:0" Vary Accept-Encoding Server Microsoft-IIS/7.5 X-Powered-By ASP.NET Date Mon, 27 Jun 2011 13:06:41 GMT Content-Length 5067 Request Headersview source Host www.xx.com User-Agent Mozilla/5.0 (Windows NT 6.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 Accept text/css,*/*;q=0.1 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip, deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.xx.com/ Cookie __utma=62996397.135679654.1309106351.1309159743.1309164158.8; __utmz=62996397.1309106351.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); __utmc=62996397

    Read the article

  • iptables: built-in INPUT chain in nat table?

    - by ughmandaem
    I have a Gentoo Linux system running linux 2.6.38-rc8. I also have a machine running Ubuntu with linux 2.6.35-27. I also have a virtual machine running Debian Unstable with linux 2.6.37-2. On the Gentoo and Debian systems I have an INPUT chain built into my nat table in addition to PREROUTING, OUTPUT, and POSTROUTING. On Ubuntu, I only have PREROUTING, OUTPUT, and POSTROUTING. I am able to use this INPUT chain to use SNAT to modify the source of a packet that is destined to the local machine (imagine simulating an incoming spoofed IP to a local application or just to test a virtual host configuration). This is possible with 2 firewall rules on Gentoo and Debian but seemingly not so on Ubuntu. I looked around for documentation on changes to the SNAT target and the INPUT chain of the nat table and I couldn't find anything. Does anyone know if this is a configuration issue or is it something that was just added in more recent versions of linux?

    Read the article

  • How to deal with a CEO making all technical decision but with little technical knowledge ?

    - by anonymous
    Hi, Question posted anonymously for obvious reasons. I am working in a company with a dev group of 5-6 developers, and I am in a situation which I have a hard time dealing with. Every technical choice (language, framework, database, database scheme, configuration scheme, etc...) is decided by the CEO, often without much rationale. It is very hard to modify those choices, and his main argument consists in "I don't like this", even though we propose several alternative with detailed pros/cons. He will also decide to rewrite from scratch our core product without giving a reason why, and he never participates to dev meetings because he considers it makes things slower... I am already looking at alternative job opportunities, but I was wondering if there anything we (the developers) could do to improve the situation. Two examples which shocked me: he will ask us to implement something akin to configuration management, but he reject any existing framework because they are not written in the language he likes (even though the implementation language is irrelevant). He also expects us to be able to write those systems in a couple of days, "because it is very simple". he keeps rewriting from scratch on his own our core product because the current codebase is too bad (codebase whose design was his). We are at our third rewrite in one year, each rewrite worse than the previous one. Things I have tried so far is doing elaborate benchmarks on our product (he keeps complaining that our software is too slow, and justifies rewrites to make it faster), implement solutions with existing products as working proof instead of just making pros/cons charts, etc... But still 90 % of those efforts go to the trashbox (never with any kind of rationale behind he does not like it, again), and often get reprimanded because I don't do exactly as he wants (not realizing that what he wants is impossible).

    Read the article

  • Nivida driver install

    - by Adham
    tried black listing and every thing i could find on the internet used with root and alt+ctrl+f1 with no solution nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Mon Jun 17 08:35:25 2013 installer version: 319.23 PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin nvidia-installer command line: ./nvidia-installer Using: nvidia-installer ncurses user interface -> License accepted. -> Installing NVIDIA driver version 319.23. -> Running distribution scripts executing: '/usr/lib/nvidia/pre-install'... -> done. -> The distribution-provided pre-install script failed! Continue installation anyway? (Answer: Yes) ERROR: The Nouveau kernel driver is currently in use by your system. This driver is incompatible with the NVIDIA driver, and must be disabled before proceeding. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver. WARNING: One or more modprobe configuration files to disable Nouveau are already present at: /etc/modprobe.d/nvidia-installer-disable-nouveau.conf. Please be sure you have rebooted your system since these files were written. If you have rebooted, then Nouveau may be enabled for other reasons, such as being included in the system initial ramdisk or in your X configuration file. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.

    Read the article

  • Added resolution not working after upgrading to 12.04

    - by David
    After upgrading, my screen resolution (added by xrandr comands on the start) did not work like before. Messages appear showing some errors (that i have never had in 11.10). "No se pudo aplicar la configuración almacenada para los monitores"/"Can't apply the stored configuration for the monitors." This script didn't work either. xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync xrandr --addmode VGA1 1280x1024_60.00 xrandr --output VGA1 --mode 1280x1024_60.00 I also tryed deleting monitors.xml but, nothing. This only erase the window message. It's been sayd that ##It's a normal buggy and well know problem for Pc's with Intel integrated video cards.## The new version of gnome-settings-daemon stores its configuration information in dconf rather than gconf. I tryed something, but the problem persist. This is what i did. Install the dconf-tools package, and then run dconf-editor. In the tree on the left, navigate org - gnome - settings-daemon - plugins - xrandr. Uncheck the active checkbox. restart your XServer (Ctrl+Alt+Backspace) (It didn't worked out for me, but it may be helpful to someone)

    Read the article

  • How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

    - by David Siegel
    How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

    Read the article

  • RDS Replication across regions

    - by Bryan Migliorisi
    We are using Amazon AWS for our web services but given the recent instabilities in their infrastructure, we are trying to figure out how to run our application across multiple regions for additional redundancy. Ideally, we would run our entire app in a active-active configuration in multiple regions but our main concern is that we are using RDS, which I understand cannot replicate across regions. One possible solution (though we have not tried or proven it would work) would be to do mysqldump or EBS snapshots every hour or so but this would mean that we would be forced to run in an active-passive configuration. Our data would be at most an hour behind. This carries its own issues around data synchronization when we failover and the master comes back up, so its not the best solution. Are there any proven solutions for replicating RDS across regions?

    Read the article

  • samba - join domain - automatically set workgroup

    - by ftiaronsem
    Hell alltogether Since I have to do this often, I want to automate the joining to a windows domain as much as possible. While joining a domain one has to specify realm = in the /etc/smb.conf, along with some other settings like security=ads. Among these settingst there is workgroup = My question is: Is it possible to fill this field automatically by samba, while joining a domain? Normally I would just have said never, but as I tried leaving this field blank while joining a domain, i got: Failed to join domain: Invalid configuration ("workgroup" set to '', should be 'BLABLA') and configuration modification was not requested This has made me wondering whether an automatic modification is possible and if so how? A search on the internet and the man page brought no results. It would be really great, if someone could answer that. Thanks in advance ftiaronsem

    Read the article

  • Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

    - by andybjackson
    Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

    Read the article

  • The Mac Tax

    - by Robert May
    One of our users was having difficulties with their mac and using some web software.  I decided to go peruse the landscape and see how much of a premium people were paying for their macs.  I priced out a Dell and a Mac from their websites.  I tried to get them as close to the same configuration, from a hardware standpoint, as I could.  I found the following: Apple Macbook Pro   Dell XPS 17 There are several important differences in the hardware: The mac doesn’t have a blueray player, but the dell does. The mac has a slightly slower processor. The mac claims to have a better battery, but doesn’t list the specifics, so there’s no way to tell. The mac doesn’t list the video card stats, so there’s no way to tell how comparable they are, but they’re probably close. The mac doesn’t come with any additional software.  No iWorks, iPhoto, etc.  They were left to their default of None, so arguably, the Dell is more functional out of the box. Other than changing the hardware specs to be close, all other configuration options were left at their default. So riddle me this, Batman:  Why do people buy Macs?  I have several dev buddies that own them, but I can’t justify the cost.  First, most of them load bootcamp and/or parallels at extra cost to run windows 7 and windows apps.  The hardware isn’t as good.  The price is almost twice as expensive. How do you justify the premium price? Technorati Tags: General

    Read the article

  • Extension GLX missing...on a desktop PC

    - by Bart van Heukelom
    I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

    Read the article

  • How do I network this Windows Failover Cluster and MongoDB Replica Set? (diagram inside)

    - by arex1337
    As you can see, my two Windows Server Failover Cluster (WSFC) nodes have three network interfaces each, which connects them to three different networks : A public network A private network consisting of the WSFC nodes A private network consisting of the WSFC nodes and a machine with the WSFC Quorum Witness File Share Does this network configuration I've planned, make sense? Do I have the "right" number of NICs and networks? I'm thinking the 2nd NIC/network may be unnecessary. My two MongoDB Replica Set nodes also have three network interfaces each - very similar to the previous situation: A public network A private network consisting of the primary and secondary MongoDB Replica Set nodes A private network consisting of the primary, secondary and arbiter MongoDB Replica Set nodes Does this network configuration, make sense? Do I have the "right" number of NICs and networks? I'm thinking the 2nd NIC/network may be unnecessary. Here is the simpler version I'm considering: UPDATE:

    Read the article

  • Wireless drivers

    - by Kencer
    The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • How to secure both root domain and wildcard subdomains with one SSL cert?

    - by Question Overflow
    I am trying to generate a self-signed SSL certificate to secure both example.com and *.example.com. Looking at the answers to this and this questions, there seems to be an equal number of people agreeing and disagreeing whether this could be done. However, the website from a certification authority seems to suggest that it could be done. Currently, these are the changes added to my openssl configuration file: [req] req_extensions = v3_req [req_distinguished_name] commonName = example.com [v3_req] subjectAltName = @alt_names [alt_names] DNS.1 = example.com DNS.2 = *.example.com I tried the above configuration and generated a certificate. When navigating to https://example.com, it produces the usual warning that the cert is "self-signed". After acceptance, I navigate to https://abc.example.com and an additional warning is produced, saying that the certificate is only valid for example.com. The certificate details only listed example.com in the certificate hierarchy with no signs of any wildcard subdomain being present. I am not sure whether this is due to a misconfiguration or that the common name should have a wildcard or that this could not be done.

    Read the article

  • sendmail on Ubuntu won't send from www-data user

    - by bumperbox
    I if call mail() function in PHP from webserver (running as www-data) i get an error sending email. If i call the same script from the cmdline logged in as root, then it works If i switch user to www-data and run from the cmdline i get this error message WARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) can not chdir(/var/spool/mqueue-client/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. FAILEDWARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) can not chdir(/var/spool/mqueue-client/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. FAILEDTest Complete$ WARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) I am guessing i need to do something in sendmail configuration I have googled for some solutions but have ended up more confused. Can someone let me know what configuration I need to change to fix so i can send from www-data user?

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >