Search Results

Search found 10397 results on 416 pages for 'mobile devices'.

Page 168/416 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• Digital HD Transition

  - by Bill Evjen

  The HD Experience Roughly 53% of the viewing public has HD capable devices in their home 24% think they are watching HD while they have no subscription to any HD content Today’s HD Considerations Choices abound: format resolution – 720p, 1080i/p frame rates compression and wrapping audio compression and delivery metadata packaging, delivery, and usage content delivery protocols Metadata is going to be a part of the overall experience With emerging technologies: Super Hi-Vision (SHV, UHDTV 4320p), 3D HEVC/H.265, WEBM/VP8 HDBaseT, P2PTV Dolby Pulse/HE-AAC Industry standardization Metadata registration, packaging, and delivery standards Improved picture and sound quality is a logical next step but we need to also think about the end to end viewing experience including; 3D video and audio content Mixed-mode viewing to bring interactive and immersive experiences Content Transportability both on-to and off-of the aircraft High Definition Standardization Analog switch off around the world DTV transition completed: 17 countries DTV transition in progress: 45 countries The EU has mandated the end of 2012 as the final date for Analog Switch Off D-Cinema was standardized by SMPTE in 2006 Airlines are installing HD displays today Passengers are bringing their own devices now HD TV on airlines are getting bigger and bigger – bigger than SD was – now up to 23” Gray scale data input for color – 6 to 8 bit Contrast – 400 to 700 Backlit – LED Encryption – can it be the same for HD? PPV in the cabin?

  Read the article

• ArchBeat Link-o-Rama for October 23, 2013

  - by OTN ArchBeat

  Virtual Dev Day: Oracle ADF Development - Web, Mobile, and Beyond This free virtual event includes technical sessions that range from introductory to deep dive, covering Oracle ADF and Oracle ADF Mobile. Multiple tracks cover every interest and every level and include live online Q&A for answers to your technical questions. Register now! Americas: Tuesday, November 19, 9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT APAC: Thursday, November 21, 10am–1:30pm IST (India) / 12:30pm–4pm SGT (Singapore) / 3:30pm–7pm AESDT EMEA: Tuesday, November 26, 9am-1pm GMT / 1pm-5pm GST/ 2:30pm-6:30pm IST A Roadmap for SOA Development and Delivery | Mark Nelson Do you know the way to S-O-A? Mark Nelson does. His latest blog post, part of an ongoing series, will help to keep you from getting lost along the way. Updated ODI Statement of Direction | Robert Schweighardt Heads up Oracle Data Integrator fans! A new product statement of direction document is available, offering "an overview of the strategic product plans for Oracle’s data integration products for bulk data movement and transformation, specifically Oracle Data Integrator (ODI) and Oracle Warehouse Builder (OWB)." Java-Powered Robot Named NAO Wows Crowds | Tori Wieldt Java community manager Tori Wieldt interviews a robot and human. Nordic OTN Tour 2013 | Lonneke Dikmans Oracle ACE Director Lonneke Dikmans checks in from the Stockholm leg of the Nordic OTN Tour for 2013, sponsored by the Danish Oracle User Group and featuring fellow ACE Directors Tim Hall and Sten Vesterli, plus local speakers at various stops. Lonneke's post include the slides from three of the presentations. Thought for the Day "Some people approach every problem with an open mouth." — Adlai E. Stevenson23rd Vice President of the United States (October 23, 1835 – June 14, 1914) Source: brainyquote.com

  Read the article

• 100% Product Coverage in EBS CRM Communities

  - by Oracle_EBS

  Starting June 1st we are now providing 100% coverage for the entire Oracle CRM product line! To facilitate this growth we have made the following changes: Quoting, Telesales, Mobile Field Service and Lease and Finance Management have all been decommissioned and their content moved to their respective communities. Quoting and Telesales are now covered in the newly renamed Sales, Marketing & Common Apps community. Mobile Field Service is now covered in the Field Service Product Family community which used to be called Depot Repair. Lease and Finance Management is now under Contracts. The CRM Communities are an excellent channel for collaborating on issues that are not highly time sensitive or complex. Check with Oracle experts and Industry Peers as they can provide a clue or a nudge toward an answer or a confirmation on a workaround. Some of the best and brightest will be there to assist you. Check the News & Announcement regions for an updated list of covered products. Here are links to the current CRM communities. Service Install Base Contracts CRMO Field Service Product Family Sales, Marketing & Common Apps Trade Management Sales Compensation

  Read the article

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• SDcardReader/Writer is not connected

  - by Insuk

  My IOGEAR sdCardReader/Writer is recongized on Ubutu(by using VM ware) but when I tried to connect to "Removable Devices - Alcor Micro Flash Card Reader/Writer" , the follwoing message is appeared. " The connection for the USB device "Alcor Micro Flash Card Reader/Writer" was unsuccessful. The device is currently in use. " But I think it is not used. Should I use IOGEAR driver for this one? When I connect the card reader, Ubuntu automatically got the "Alcor Micro Flash Card Reader/Writer" . How can I fix the problem? Thank you, Insuk the result of lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772 Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 005: ID 0403:bcda Future Technology Devices International, Ltd From the vmware log : 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d). 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d).

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Ubuntu is not detecting my android device

  - by user3514160

  I am new to android. I have just downloaded and installed android sdk. Now when I run the application from eclipse, my device is not getting detected. I have googled and was brought up with this as my solution, but that also didn't worked. Here's the 51-android.rules SUBSYSTEMS=="usb", ATTR{idProduct}=="0bb4", ATTR{idProduct}=="0c03", MODE="0666", GROUP="plugindev", OWNER="<username>" After that I rebooted my laptop, and ran this command: username@laptopname:~/Android/adt-bundle/sdk/platform-tools$ adb devices The output i get is: * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached ???????????? no permissions EDIT crazydeveloper@crazydeveloper:~$ lsusb Bus 002 Device 004: ID 0bb4:0c03 HTC (High Tech Computer Corp.) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b337 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/004/ ls: cannot access /dev/bus/usb/004/: No such file or directory crazydeveloper@crazydeveloper:~$ Edit: 2 After the answer submitted here's the output that i got: crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/002 total 0 crw-rw-r-- 1 root root 189, 128 May 7 09:45 001 crw-rw-r--+ 1 root root 189, 129 May 7 09:45 002 crw-rw-rw- 1 root plugdev 189, 130 May 7 09:48 003 I am using Micromax Canvas 2.2 A114 - Android Version 4.2.2 Please help me. Thanks.

  Read the article

• unreachable subnet in one direction

  - by Carl Michaud

  I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

  Read the article

• How bad would be to focus on iOS/Android development for an indie developer?

  - by kender

  After some time developing games for others I'm thinking of moving towards my own productions. My background is 10+ years of software development, with last 2 years spent on the iOS development (Objective-C and CoronaSDK). With my current experience in Corona I can quickly develop for iOS and Android systems. And this is something that I'm probably gonna do with several of the game ideas I have, at least for the prototype part. But - I'm wondering if it's not a bad idea to focus on those 2 systems only. After all there are other mobile platforms, there are PCs, Macs and Linux boxes... All of them having gamers using them. I was wondering if it wasn't a good idea to try some other SDK, giving me more flexibility when it comes to platform-independance. There's Unity3D (I think I can develop a 2D game in it though), there's MoAI from what I checked. I see a few options, not sure which one is best as I have little experience in this field (publishing own games): Stick with CoronaSDK for the whole time, release for iOS and Android platforms, screw other mobile devices and PCs, Use Corona for prototyping, then when the idea goes more into the "production" phase rewrite it in MoAI or Unity3D for more platforms support, Start with one of those 2 SDKs right now (which means the prototype phase will be delayed a bit, but after that I can jump right into real coding). Any clues here, what to do?

  Read the article

• .NET vs Windows 8: Rematch!

  - by Simon Cooper

  So, although you will be able to use your existing .NET skills to develop Metro apps, it turns out Microsoft are limiting Visual Studio 2011 Express to Metro-only. From the Express website: Visual Studio 11 Express for Windows 8 provides tools for Metro style app development. To create desktop apps, you need to use Visual Studio 11 Professional, or higher. Oh dear. To develop any sort of non-Metro application, you will need to pay for at least VS Professional. I suspect Microsoft (or at least, certain groups within Microsoft) have a very explicit strategy in mind. By making VS Express Metro-only, developers who don't want to pay for Professional will be forced to make their simple one-shot or open-source application in Metro. This increases the number of applications available for Windows 8 and Windows mobile devices, which in turn make those platforms more attractive for consumers. When you use the free VS 11 Express, instead of paying Microsoft, you provide them a service by making applications for Metro, which in turn makes Microsoft's mobile offering more attractive to consumers, increasing their market share. Of course, it remains to be seen if developers forced to jump onto the Metro bandwagon will simply jump ship to Android or iOS instead. At least, that's what I think is going on. With Microsoft, who really knows?

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• ADF & Fusion Development Webcast–December 11th 2012

  - by JuergenKress

  Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staff. Oracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF's integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications. Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect – this event has something for everyone. Don't miss this opportunity. For details and registration please click here. View Session Abstracts We look forward to welcoming you at this free event! December 11th, 2012 9:00 – 13:00 GMT & 10:00 – 14:00 CET & 12:00 – 16:00 AST & 13:00 – 17:00 MSK & 14:30 – 18:30 IST WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: ADF,ADF training,Fusion Developer day,webcast,WebLogic Specialization,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Java and what to do with it

  - by SterAllures

  I've been browsing through several websites and several topics on this website. Now I'm just a starting programmer and I want to make a good decision. From what I understand is that Java is used alot for server stuff, and web applets but not really for computer applications running on a client, it's also used for Android programming and several other mobiles. I'm really interested in Android programming, I really love to program for mobile devices, in this case Android because I really think it has a lot of potential and I don't like the iPhone. If I want to program on Android I have to learn Java (aside from Mono). but if my decision changes over the next couple of years I don't think Java is the right language to get a job that programs computer applications. I think I get a job where I have to program server stuff, rather than computer applications. That's why I think C# is a good choice. I can program for Windows Phone 7 (I hope that will get big). and I have the feeling C# is more widely used for computer applications. so I think C# is more versatile looking at Mobile programming and computer programming. Or am I totally wrong thinking this?

  Read the article

• Stop Time Sync Between Host and Guest - VirtualBox

  - by KoopaTroopa

  So I've been googling and I've tried the following commands. I want to stop the virtual machine from having the correct time and just to stick with what time it last recorded. The host operating system is Ubuntu 12.04 and the guest is Windows XP. I've turned time syncing off in XP so it won't do that when I connect to the Internet. However it does appear to take the time from ubuntu and set it as it's own. VBoxManage setextradata XP11 “VBoxInternal/TM/WarpDrivePercentage” 200 vboxmanage setextradata XP11 "VBoxInternal/Devices/VMMDev/0/Config/GetHostTimeDisabled" "1" Both commands haven't work as the time is always set to the exact same as Ubuntu's. I've located the extradata entry in the virtualbox XML file. It states both changes that the commands above are set to make. But of course it still hasn't stopped updating the time. <ExtraData> <ExtraDataItem name="GUI/LastGuestSizeHint" value="1152,864"/> <ExtraDataItem name="GUI/LastNormalWindowPosition" value="74,52,1152,911"/> <ExtraDataItem name="VBoxInternal/Devices/VMMDev/0/Config/GetHostTimeDisabled" value="1"/> <ExtraDataItem name="&#x201C;VBoxInternal/TM/WarpDrivePercentage&#x201D;" value="200"/> </ExtraData>

  Read the article

• How to optimize a box2d simulation in action game?

  - by nathan

  I'm working on an action game and i use box2d for physics. The game use a tiled map. I have different types of body: Static ones used for tiles Dynamic ones for player and enemies Actually i tested my game with ~150 bodies and i have a 60fps constantly on my computer but not on my mobile (android). The FPS drop as the number of body increase. After having profiled the android application, i saw that the World.step took around 8ms in CPU time to execute. Here are few things to note: Not all the world is visible on screen, i use a scrolling system Enemies are constantly moving toward the player so there is alaways to force applied to their body Enemies need to collide between each others Enemies collide with tiles I also now that i can active/desactive or sleep/awake bodies. Considering the fact that only a part of the enemies are possibly displayed on screen, is there any optimizations i can do to reduce the execution time of box2d simulation? I found a guy trying an optimization based on distance of enemies from the player (link). But i seems like he just desactives far bodies (in my case, i could desactive bodies that are not visible). But my enemies need to move even when they are not visible on screen, and applying forces will not workd on inactive bodies. Should i play with sleeping bodies here? Also, enemies are composed by two fixtures and are constantly colliding with each others and with tiles but i really never need to get notified about that. Is there anything i can do to optimize this kind of scenario? Finally, am i wrong to try to run simulation at 60FPS on mobile and should i try to make it run at 30FPS?

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• Algorithms for Data Redundancy and Failover for distributed storage system?

  - by kennetham

  I'm building a distributed storage system that works with different storage sizes. For instance, my storage devices have sizes of 50GB, 70GB, 150GB, 250GB, 1000GB, 5 storage systems in one system. My application will store any files to the storage system. Question: How can I build a distributed storage with the idea of data redundancy and fail-over to store documents, videos, any type of files at the same time ensuring that should one of any storage devices fail, there would be another copy of these files on another storage device. However, the concern is, 50GB of storage can only store this maximum number of files as compared to 70GB, 150GB etc. With one storage in mind, bringing 5 storage systems like a cloud storage, is there any logical way to distribute or store the files through my application? How do I ensure data redundancy through different storage sizes? Is there any algorithm to collate multiple blob files into a single file archive? What is the best solution for one cloud storage with multiple different storage sizes? I open this topic with the objective of discussing the best way to implement this idea, assuming simplicity, what are the issues of this implementation, performance measurements and discussion of the limitations.

  Read the article

• What You Said: How Do You Browse Securely Away From Home?

  - by Jason Fitzpatrick

  Responses to this week’s Ask the Reader question show that just because you’re away from home doesn’t mean you have to give up the security and privacy that your home network provides. Earlier this week we asked you to share you browsing away from home security tips and tricks and obliged. JC offered one of the more entertaining tales of away-from-home browsing: Recently a bunch of us stayed at a high end resort down in Mexico. Internet was offered as a pay per device service at about $80/week/device. Considering we had about 12 wifi devices there among us(a few geeks), I decided to plan ahead. I setup a WRT54G as a WiFi client with a vpn back to my house and NAT. Setup a second one as a basic wireless access point with password and plugged it into the first. Onsite we setup the devices and connected to the wireless with one paid account(tied to the MAC address). Everyone connected to the other device for wireless access and it was all tunnelled through my home network with encryption. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

  Read the article

• Registration Now Open: Virtual Developer Day, North America, APAC & Europe

  - by Tanu Sood

  Is your organization looking at developing Web or Mobile application based upon the Oracle platform?  Oracle is offering a virtual event for Developer Leads, Managers and Architects to learn more about developing Web, Mobile and beyond based on Oracle applications. This event will provide sessions that range from introductory overviews to technical deep dives covering Oracle's strategic framework for developing multi-channel enterprise applications for the Oracle platforms. Multiple tracks cover every interest and every level and include live online Q&A chats with Oracle's technical staff. For registration and information on Vortual Developer Day: Oracle ADF Development, please follow the link HERE Sign up for one of the following events below: Americas - Tuesday - November 19th / 9am to 1pm PDT / 12pm to 4pm EDT / 1pm to 5pm BRT APAC - Thursday - November 21st / 10am - 1:30pm IST (India) / 12:30pm - 4pm SGT (Singapore) / 3:30pm -7pm AESDT EMEA - Tuesday - November 26th / 9am - 1pm GMT / 1pm - 5pm GST / 2:30pm -6:30pm IST And for those interested in Cloud Application Foundation, including Weblogic and Coherence, don't forget to sign up for the following events: Americas - Tuesday, November 5, 2013 - 9 am - 1 pm PDT/ 12 pm - 4 pm EDT/ 1 pm - 5 pm BRT EMEA - December 3, 2013 - 9 a, - 1 pm GMT/ 1pm - 5pm GST/ 2:30 pm - 6:30 pm ISTThe event will guide you through tooling updates and best practices around developing applications with WebLogic and Coherence as target platforms.

  Read the article

• JavaOne Technology Conference Is Coming to Russia

  - by Tori Wieldt

  JavaOne Russia 17-18 AprilRussian Academy of Sciences, MoscowRegister Now JavaOne and Oracle Develop 2012 Russia offers a wide variety of sessions, hands-on labs, keynotes, demos, and the opportunity to network with developer peers. If you’re looking for in-depth sessions on Java technologies and tools, this is the conference for you. Your registration also gets you into Oracle Develop sessions as well, so you can learn about application servers, cloud development and, of course, database development. The JavaOne Russia tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #oracleRU

  Read the article

• WebLogic Partner Community Newsletter October 2013

  - by JuergenKress

  Dear WebLogic Partner Community member, Our October newsletter edition focuses on Oracle OpenWorld 2013, highlights, keynotes and all presentations. Thanks to all the partners who made the conference a huge success, if you could not come to San Francisco, you can find all the details in this newsletter. We added additional locations for the free hands-on ADF & ADF Mobile Bootcamps & WebLogic Bootcamps. As a community member you can also get a free voucher to become a WebLogic Server 12c Certified Implementation Specialist or ADF 11g Certified Implementation Specialist (limited to partners from EMEA!) If you can not make it to a Bootcamp, do not miss the virtual developer days for WebLogic and ADF Mobile. If you plan to install WebLogic read first the article “Setup a 12c Fusion Middleware Infrastructure from René van Wijk. If you administrate Middleware make sure you read the documentation and support notes Weblogic Server Patching & Maintenance Information Center. In the ADF section of the newsletter our product management team continues with the ADF Architecture on-demand training. Andrejus released the latest version of the ADF Performance Audit Tool v 2.0. The summer is over, if you look for a Christmas present, for your kids or yourself maybe you want to run Java on LEGO® Mindstorms® EV3. Jürgen Kress To read the newsletter please visit http://tinyurl.com/WebLogicNewsOctober2013 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• How to connect MTS MBlaze

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >