Search Results

Search found 681 results on 28 pages for 'i7'.

Page 17/28 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

    - by C-Blu
    After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

    Read the article

  • How do you passthrough native SATA drives to a guest on ESXi?

    - by John
    I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

    Read the article

  • Whats a good host for an active vBulletin site?

    - by Kyle
    I've been switching hosts using a VPS each time and I'm just really not sure I'm finding the right VPS's. I've used a VPS from burst.net & rubyringtech and I just feel like it's slowly killing my site because of the slow speed. I really don't know if it's the network or the VPS itself but I really wish to fix this. When I TOP into the VPS peak times it shows this: top - 03:18:56 up 16:33, 1 user, load average: 1.33, 1.40, 1.33 Tasks: 30 total, 1 running, 29 sleeping, 0 stopped, 0 zombie Cpu(s): 27.2%us, 13.6%sy, 0.0%ni, 59.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 679712k used, 368864k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached And pages take atleast a good 2-3 minutes to load. I have only like 50-60 members on the forum also. I had a shared hosting account and the forum was lightning fast.... Is a VPS a bad idea? :\ What should I do to fix this? I'm running lighttpd with xcache, and the latest mysql + php version. The server is a intel i7 2600 w/ 1gb uplink (I think the 1gb uplink is a lie because I've tested the network and the highest download speed I've seen was 20mb/s from a code.google page) All in all I've seen people talking about linode. Should I try them? I honestly don't need a dedicated server yet it's only 50-70 members online. What should I do? I really want a VPS because I enjoy root access. Does anyone have any suggestions?

    Read the article

  • Updating ATI HD 5970 Graphics card - version errors?

    - by user55406
    I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

    Read the article

  • Any ramifications to disabling ClearPageFile

    - by user34710
    I am runing a Dell XPS 15z with a quad core I7, 8gb ram, 7200rpm hdd, windows 7 ultimate. My laptop was taking around 3 minutes to shut down, which seemed far too high to me. I did a bit of investigation, and it seemed that the ClearPageFile reg entry was set to 1, meaning that upon shutdown my pagefile.sys was being cleared before actually shutting the machine down. When I disable this setting, my laptop shuts down in about 20 seconds - clearly a big gain. My question is, are there any side effects of having this turned off (other than the security risk of the HDD being stolen, and still having any important info that was in the RAM up for grabs)?

    Read the article

  • Bootable dvd installs ubuntu in one computer but not in other...Why? [closed]

    - by SAM
    Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? I have 2 computers, Windows 7 Intel. On one computer Ubuntu boot-able DVD (AMD 64) works properly. But on other computer the same DVD boots OK but when clicked on "Install Ubuntu" a blank screen with blinking cursor(_) appears and it continues just blinking forever. What problem can be there in computer 2? Can it be DVD reader's problem? (Both computers have LG DVD RW) Can there be any problem in DVD? Computer 1 specs: Pentium D 3 GHz Windows 7 32-bit not a 64bit-capable processor still Ubuntu 64bit trial/installer runs... Computer 2 specs: Core i7 2700k Windows 7 32-bit nvidia gtx 560 graphicsCard ...BIG BOSS... still can't run the setup/trial/disk-check/memory-test ?!?!? Is it the problem of graphics card ?!? I also tried burning other dvd which has the same behavour.... AND yes the dvd name is: ubuntu-12.04.1-dvd-amd64.iso Any help is appreciated.

    Read the article

  • Enabling GTX 570

    - by Silas
    Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

    Read the article

  • HD 6970 Corrupted Video

    - by FailedDev
    considering this rig : i7 2600K 8GB RAM Corsair Vengeance kit 10-9-10-27 @1866 HD 4870 PSU Corsair AX 1200 I recently upgraded to a HD 6970 and I am getting the following - not so nice screens : http://imageshack.us/g/213/1000142z.jpg/ Had anyone any similar trouble at all? I am thinking that the card is DOA but could it also be the Mobo? Since I am in the BIOS I can't think how the mobo could be the problem. HD 4870 works perfect btw regardless of what I throw at it. Any way to prove that the card is OK? Thanks

    Read the article

  • how to debug BSOD irql_not_less_or_equal error

    - by Sev
    So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

    Read the article

  • Why won't Windows use the other CPU cores?

    - by revloc02
    In Windows Task Manager the Performance tab shows the first CPU maxed out, the other 7 just idling along with the occasional spike. What gives? More info: I've got 8GB and only 4.5GB are being used. The Processes tab has no indication of any process hogging processing power. In fact System Idle Process is 98-99. When I program stuff and have like 8 to 12 applications going (several directly unrelated to programming of course) my computer slows to a crawl. Sysyem Info: Intel Core i7-2600K Processor (quad-core with hyper-threading), 8GB RAM, Intel BOXDZ68BC LGA 1155 Motherboard, 500GB HDD

    Read the article

  • gtk2/mate apps are choppy on debian testing [migrated]

    - by b0ti
    I have recently upgraded to a core-i7 system and now all the apps from mate (GTK2 based) are very slow. Basically when I switch to a workspace that has a couple mate-terminals open, they are redrawn as if these were sent over the network. GTK3 apps and firefox work properly and are refreshed instantly. I'm running Debian testing. I have tried to reinstall xorg and related packages and everything seems to work fine except for this. Here is my xorg.log. Any hints?

    Read the article

  • Can I use VT-D with a windows host for a VM?

    - by Journeyman Geek
    I've got a fairly beefy gaming system that I also run occational virtual machines on. It runs windows 8 and the built in hyper V virtual machine software at the moment and has a core i7 3770 (which unlike the unlocked model, should support VT-D), an Asus P8Z77V and a gforce 660 video card(also asus). I figure that if I could use VT-D I could add a cheap dedicated 3d card for a VM, in case I wanted somewhat more than the 'basics'. I know KVM and Xen support this to some level on linux, but can I do so on windows? I'm open to switching VM software if need be.

    Read the article

  • What are the current options to encrypted a partition on mac os x ?

    - by symbion
    I recently got my laptop stolen with some sensitive informations on it (personal source code, bank details in a secure file, passwords, etc) and I learnt the lesson: encrypt your sensitive data. Now, I am wondering what are the options to encrypt a partition (not an encrypt disk image) ? Aim: The aim is to prevent anyone (except me) to access those data. Requirement 0: The software must be able to encrypt non system partition. Requirement 1: Plausible deniability is required but preventing cold boot attack is however not an absolute requirement (I am not famous enough or have sensitive enough info to have this kind of requirement). Requirement 2 : Software taking advantage of AES hardware encryption are very welcome as I intent to get a Macbook Pro with i7 CPU (with AES-NI enabled instructions). I will have avirtual machine running in the encrypted partition. Requirement 3 : Free or reasonably cheap. Requirement 4 : Software must run on Mac OS X Snow Leopard or Lion. So far, TrueCrypt is the only option I have found. Regards,

    Read the article

  • Using TrueCrypt (software encryption) with an SSD

    - by Shackrock
    I use full drive encryption (FDE) w/ TrueCrypt on my laptop. I have a 2nd gen I7 with AES instruction support, so honestly I can't even notice a speed change on the system with it on. My question, is for those who know about SSD's a lot. I previously (early 2011) read articles about how software encryption will negate the speed benefits that an SSD provides - because of the need for the SSD to send a delete command, then a write command, for every encrypted write - instead of just writing over data like a regular HDD would (or something like this...honestly I can't remember...ha!). Anyway, any improvements in this field? Is it pointless for me to grab an SSD if I'm using FDE? Thanks all.

    Read the article

  • what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

    - by Michael Borgwardt
    When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

    Read the article

  • 64 bit Windows 7 + 32 bit windows XP dual boot?

    - by Mick
    I have purchased an i7 based PC pre-installed with 64 bit windows 7 (home premium). Unfortunately some third party 32 bit software that I need to use is not working properly (see stackoverflow.com for details). I am now torn between the plan of installing windows XP 32 bit or making it dual boot. Which option do you think will give me the least problems? And if the answer is dual boot, then can you point me to a good guide for how to do it, preferably a guide specifically for my two OS's created in this order (i.e. 7x64 first). EDIT: the performance of my 32bit programs is critical so am concerned about any kind of 32bit XP "emulation".

    Read the article

  • Error 5A - Internal CPU Error

    - by Mitch
    So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

    Read the article

  • Ubuntu 11.04 64bits Keeps Randomly Freezing

    - by user971602
    This has been a real headache for me since the number of freezes has increase from twice a week to about 1 or twice a day. The system just halts and nothing can be done but hitting the restart button. At the beginning I thought it was related to Flash since I was getting random freezes when playing full screen flash videos online. I also thought it could be the wireless pci card. But the system has freezed using browsing around GNOME. The truth is, the freezes are really random and strange. I checked this thread Ubuntu keeps randomly freezing and try to ssh my computer using another one, but I could not ssh since it was really totally frozen. NumLock or CapsLock wasn't responding or blinking. Since I could not ssh I, also ignored this article https://wiki.ubuntu.com/X/Troubleshooting/Freeze According to my wife, the system has also halted under Win7 Pro 64bit but with less frequency. Here is my system configuration Intel Core i7 2600k ASRock Z68 Extreme3 gen3 Motherboard Crucial M4 128GB CT128M4SSD2 SSD WD Caviar Green WD10EADS 1TB SATA II G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR2 OCZ ModXStream 600W Power Supply Rosewill RNX-N300X PCI Wireless Adapter No external Graphics Card I remove the Wireless card and used Ethernet to see if the problem was the that, but I got a freeze after doing that. I also ran memtest86 and everything was ok. The only other thing I might suspect of is the SSD. I will try to clone the SSD to a HDD to see if that solve the problem. At this point I am stuck with the freezes. Do anyone have a clue of why this is happening and how can i solve this?

    Read the article

  • after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

    - by Ricardo
    After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

    Read the article

  • why are CPUs so much more expensive in the UK than US?

    - by Nick Fortescue
    I'm looking at building my own PC. An Intel Core i7 960 3.2 Ghz is about £457 in the UK at various online retailers. In the US the price at newegg is $570 (this is about £380 at current exchange rates). 2 questions. 1) Why the difference (about 20%)? All I can think of is sales tax. 2) Am I right in assuming this is just a commodity part - if I ordered one from the US there is no reason it would be any different from one bought in the UK?

    Read the article

  • No sound Ubuntu 12.04 through HDMI

    - by MikeMan
    Specs: Asus G73JH i7/720; ATI Mobility 5870 I have read through a lot of threads on getting HDMI sound to work and non of them have fixed my issue. Granted I am very new to Linux and know only the GUI aspect of what it does from finding similarities that Windows 7 has. I would like to become a Linux Power User and I figured this would be a good step to get started. I was able to successfully install my graphics driver and it shows in use. I connect the HDMI to my HD TV and I get no sound. I don't care about auto switch for sound, that would be great but not necessary. I just want my sound to work through the HDMI. What I have tried: Changed GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" pact set-card-profile 0 output:hdmi-surround Failure: no such entity Sound Settings: Right-click Sound indicator ? Sound Settings ? Output Tab, and set Digital Output (S/PDIF) Built in Audio Speakers Built in Audio I only get 2 settings. If I right-click the area below those 2 in the "play sound through" box, I get no "show hidden devices". I am also doing all this with the HDMI connected to eliminate any possibility for error.

    Read the article

  • If I double my ram on a x86 processor, does that double the ram I can use for each individual process?

    - by Derek Reitz
    I don't understand how 32-Bit OS's use RAM on a per process basis. I've read the max RAM my x86 processor running a 32-bit OS can use is 2^32 = 4gb; but that's just for one process, right? 3DS Max keeps crashing, but it typically can never use more than 2GB of RAM before it crashes, if I increase my RAM from 4-8GB, would that double how much RAM I can use for each individual process or actually cause no change in my performance? Also would increasing my VRAM and getting a better graphics card increase the extent to which individual programs can preform? Lastly, is there any way to upgrade a 86-bit processor to be able to run a 64-bit OS? I feel like it would be ridiculous to sell modern processors that are capped at 4GB of RAM? Thanks. Quad-Core Intel i7 Q 720 @ 1.6GHz

    Read the article

  • How do I configure an Intel HD Graphics 4000?

    - by derabbink
    First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

    Read the article

  • Building my own computer

    - by There is nothing we can do
    I'm planning to build my own computer. I do not have enough cash to buy all components I need in one go. I want to ask, if I buy motherboard which is compatible with i7 processor (any) and compatible with graphic card Nvidia gtx 780, does it mean that this mother board will be compatible with processors (from intel) which will be released next year? Same for graphic cards? The point is that I'd like to avoid situation where I buy motherboard let's say now, and in couple of months there will be new graphic card/processor which will not be compatible with my mother board? Or maybe shall I start completely somewhere else?

    Read the article

  • Ubuntu installer shows three small screens

    - by Sylan
    I'm trying to install Ubuntu (or Kubuntu, which I tried first) 13.04 on a new laptop. I need the install in UEFI mode in order to properly dual boot with Windows 8. I've managed to overcome most of the UEFI issues up to the installer, which appeared as a black screen until I used nomodeset. Now the installer will appear, however it does fit my screen size. Instead, it appears as three small identical screens across the top of the monitor. I thought the problem could be solved by changing the display resolution in GRUB via changing the vga number, but this simply expanded the width of the three screens. While I could install it at this point, the identical screens are too small for me to be able to read the installer. As well, the "Try Ubuntu" option simply gets stuck at a black screen. I'm afraid these problems may persist through the installation if I attempted to continue. Additional information: The laptop is a Lenovo Ideapad Y580 with an i7 3630qm processor, and a GeForce GTX 660m graphics card which works alongside an Intel HD 4000 integrated card via Optimus.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >