Search Results

Search found 10406 results on 417 pages for 'device'.

Page 171/417 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • How to check if a Webcam is broken?

    - by user84812
    I just bought an Acer Aspire 3830TG, it comes with an integrated 1.3M HD Webcam. Before buying it i tried with a bootable Lubuntu usb stick, everything worked well except for the webcam, which i thought I had to tweak. The thing is that it seems the camera should work with no problems in ubuntu. The driver is detected, I try dmesg | grep uvcvideo and the output is [ 12.226174] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 12.245553] usbcore: registered new interface driver uvcvideo I've also tried using different software (guvcview is black when camera output is MJPG and turns to funny colors when YU12 or YV12, cheese is always black, camorama is always with funny colors...). I should have checked that it was working properly with the default os (windows) but now it's too late for that. I even booted with a official Ubuntu Quantal distro from the usb pen, and the results are the same. so, my question is: is there any way to check that the camera is righmt or broken? So, if it's broken, at least i can go to the shop, show them that it's really broken and get an external webcam for free, or st like that. cheers. UPDATE 1 Thanks, jrp. I run sudo lsinput, and the output info about my video is the following: /dev/input/event6 bustype : BUS_USB vendor : 0x58f product : 0xb002 version : 2 name : "1.3M HD WebCam" phys : "usb-0000:00:1a.0-1.3/button" bits ev : EV_SYN EV_KEY /dev/input/event7 bustype : BUS_HOST vendor : 0x0 product : 0x6 version : 0 name : "Video Bus" phys : "LNXVIDEO/video/input0" bits ev : EV_SYN EV_KEY With this info, i'm not pretty sure about running the luvcview command. If I run luvcview -d /dev/video0 -L, the output is the following: SDL information: Video driver: x11 A window manager is available Device information: Device path: /dev/video0 { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/7, 1/5, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, if i run luvcview by itself, the image is funny (blue and red colors, mainly, with myself in negative state). tx

    Read the article

  • Site Studio Mobile Example - WCM Reuse

    - by john.brunswick
    Mobile internet usage is growing by leaps and bounds and it is theorized that in the not-to-distant future it will eclipse traditional access via desktop browsers. Mary Meeker, a managing director at Morgan Stanley and head of their global technology research team, recently predicted that mobile usage will eclipse desktop usage within the next 5 years in an Events@Google series presentation. In order for organizations to reach their prospects, customers and business partners, they will need to make their content readily available on mobile devices. A few years ago it was fairly challenging to provide a special, separate, site to cater to mobile users using technologies like WML (Wireless Markup Language). Modern mobile browsers have rendered the need for this as irrelevant and now the focus has moved toward providing a browsing experience that works well on small screen sizes and is highly performant. What does all of this mean for Oracle UCM? Taking site content from an existing Site Studio site and targeting it for consumption for mobile devices is a very straightforward process that is aided by a number of native capabilities in the product. The example highlighted in this post takes advantage of dynamic conversion capabilities in Oracle UCM to enable site content to be created and updated via MS Office documents. These documents are then converted to a simple, clean HTML format for consumption in the desktop and mobile browsing experiences. To help better understand how this is possible the example below shows a fictional .COM and its mobile site counterpart that both leverage the same underlying content. The scenario is not complete or production ready, but highlights that a mobile experience may be best delivered by omitting portions of a site that would be present within the version served to desktop clients. If you have browsed CNet (news.com) on a mobile device it becomes quickly apparent that they are serving an optimized version for your mobile device. An iPhone style version can be accessed at http://iphone.cnet.com/. In order to do that they leveraged some work done for the iPhone iUi project developed by Joe Hewitt that provides mobile browsers an experience that is similar to what users may find in a native iPhone application. For our example parts of this framework are used (the CSS) and this approach provides a page that will degrade nicely over a wide range of mobile browsers, since it is comprised of lightweight HTML markup and CSS. The iPhone iUi framework also provides some nice JavaScript to enable animated transitions between pages, but for the widest range of mobile browser compatibility we will only incorporate the CSS and HTML DIV / UL based page markup in our example.

    Read the article

  • Angry Bird Makers: Developers Love iOS Over Android To Make Money

    - by Gopinath
    These days web is buzzing with Apple iOS vs Google Android debates. Recently Fortune predicted that Android is going to explode in 2011 and it will surpass Apple’s iOS market share. Yes Android is set to spread its wings across all the devices – smartphones, TVs, set top boxes, in car entertainment devices, what not. Think of any device that requires operating system, Android can be used. On the other than iOS is only available on very selective Apple devices – iPods, iPhones and iPads. When it comes to the count of devices running on a specific OS, Android will be far ahead of iOS but when you consider a quality of devices and providing an eco system for business to make money iOS seems to be the winner. That is what experts and analysts are saysing. Here is an excerpt from Peter Vesterbacka, maker of the popular Angry Birds game, interview to Tech N Marketing site.  He says Apple will be the number one platform for a long time from a developer perspective, they have gotten so many things right. And they know what they are doing and they call the shots. Android is growing, but it’s also growing complexity at the same time. Device fragmentation not the issue, but rather the fragmentation of the ecosystem. So many different shops, so many different models. The carriers messing with the experience again. Open but not really open, a very Google centric ecosystem. And paid content just doesn’t work on Android. Peter says developer prefer iOS over Android as it’s not very easy to make money on Android market. That’s why they released a free version of Angry Birds game with ads support for Android devices. Free is the way to go with Android. Nobody has been successful selling content on Android. We will offer a way to remove the ads by paying for the app, but we don’t expect that to be a huge revenue stream. You can read full interview here. cc image credit: flickr/johanl This article titled,Angry Bird Makers: Developers Love iOS Over Android To Make Money, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • How to Easily Put a Windows PC into Kiosk Mode With Assigned Access

    - by Chris Hoffman
    Windows 8.1′s Assigned Access feature allows you to easily lock a Windows PC to a single application, such as a web browser. This feature makes it easy for anyone to configure Windows 8.1 devices as point-of-sale or other kiosk systems. In the past, setting up a Windows PC in kiosk mode involved much more work, requiring the use of third-party software, group policy, or Linux distributions designed around kiosk mode. Assigned Access is available on Windows 8.1 RT, Windows 8.1 Professional, and Windows 8.1 Enterprise. The standard edition of Windows 8.1 doesn’t support Assigned Access. Create a User Account for Assigned Access Rather than turn your entire computer into a locked-down kiosk system, Assigned Access allows you to create a separate user account that can only launch a single app — such as a web browser. To set this up, you must be logged into Windows as a user with administrator permissions. First, open the PC settings app — swipe in from the right or press Windows Key + C to open the charms bar, tap Settings, and tap Change PC settings. In the PC settings app, select Accounts and select Other accounts. Use the Add an account button to create a new Windows account. Select  the “Sign in without a Microsoft account” option and select Local account to create a local user account. You could also create a Microsoft account, but you may not want to do this if you just want a locked-down account with only browser access. If you need to install apps from the Windows Store to use in Assigned Access mode, you’ll have to set up a Microsoft account instead of a local account. A local account will still allow you access to the preinstalled apps, such as Internet Explorer. You may want to create a user account with a blank password. This would make it simple for anyone to access kiosk mode, even if the system becomes locked or needs to be rebooted. The account will be created as a standard user account with limited permissions. Leave it as a standard user account — don’t make it an administrator account. Set Up Assigned Access Once you’ve created an account, you’ll first need to sign into it. If you don’t, you’ll see a “This account has no apps” message when trying to enable Assigned Access. Go back to the welcome screen, log in to the new account you created, and allow Windows to go through the first-time account setup process. If you want to use a non-default app in kiosk mode, install it while logged in as that user account. Once you’re done, log out of the other account, log back in as your administrator account, and go back to the Other accounts screen. Click the Set up an account for assigned access option to continue. Select the user account you created and select the app you want to limit the account to. For a web-based kiosk, this can be a web browser such as the Modern version of Internet Explorer. Businesses can also create their own Modern apps and set them to run in kiosk mode in this way. Note that Microsoft’s documentation says “web browsers are not good choices for assigned access” because they require more permissions than average Modern (or “Windows Store”) apps. However, if you want to provide a kiosk for web-browsing, using Assigned Access is a much better option than using Guest Mode and offering up a full Windows desktop. When you’re done, restart your PC and log in as the Assigned Access account. Windows will automatically open the app you chose and won’t allow a user to leave that app. Standard Windows 8 features like the charms bar, app switcher, and Start screen won’t appear. Pressing the Windows key once will do nothing. To sign out of Assigned Access mode, press the Windows key five times — quickly — while signed in. You’ll be sent back to the standard login screen. The account will actually still be logged in and the app will remain running — this method just “locks” the screen and allows another user to log in. Automatically Log Into Assigned Access Whenever your Windows device boots, you can log into the Assigned Access account and turn it into a kiosk system. While this isn’t ideal for all kiosk systems, you may want the device to automatically launch the specific app when it boots without requiring any login process. To do so, you’ll just need to have Windows automatically log into the Assigned Access account when it boots. This option is hidden and not available in the standard Control Panel. You’ll need to use the hidden netplwiz Control Panel tool to set up automatic login on boot. If you didn’t create a password for the user account, leave the Password field empty while configuring this. Security Considerations If you’re using this feature to turn a Windows 8.1 system into a kiosk and leaving it open to the public, remember to consider security. Anyone could come up to the system, press the Windows key five times, and try to log into your standard administrator user account. Ensure the administrator user account has a strong password so people won’t be able to get past the kiosk system’s limitations and tamper with the system. Even Windows 8′s detractors have to admit that it’s an ideal system for a touch-screen kiosk device, running either a browser or another specific application. Assigned Access finally makes this easy to set up on Windows systems in the real world — no IT experience, third-party software, or Linux distributions necessary.     

    Read the article

  • Issues running commands

    - by Joel
    Every time I run a command I get this back. E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? christopher@christopher:~$ This didn't start happening until I changed my device name.

    Read the article

  • Looking into ASP.Net MVC 4.0 Mobile Development - part 2

    - by nikolaosk
    In this post I will be continuing my discussion on ASP.Net MVC 4.0 mobile development. You can have a look at my first post on the subject here . Make sure you read it and understand it well before you move one reading the remaining of this post. I will not be writing any code in this post. I will try to explain a few concepts related to the MVC 4.0 mobile functionality. In this post I will be looking into the Browser Overriding feature in ASP.Net MVC 4.0. By that I mean that we override the user agent for a given user session. This is very useful feature for people who visit a site through a device and they experience the mobile version of the site, but what they really want is the option to be able to switch to the desktop view. "Why they might want to do that?", you might wonder.Well first of all the users of our ASP.Net MVC 4.0 application will appreciate that they have the option to switch views while some others will think that they will enjoy more the contents of our website with the "desktop view" since the mobile device they view our site has a quite large display.  Obviously this is only one site. These are just different views that are rendered.To put it simply, browser overriding lets our application treat requests as if they were coming from a different browser rather than the one they are actually from. In order to do that programmatically we must have a look at the System.Web.WebPages namespace and the classes in it. Most specifically the class BrowserHelpers. Have a look at the picture below   In this class we see some extension methods for HttpContext class.These methods are called extensions-helpers methods and we use them to switch to one browser from another thus overriding the current/actual browser. These APIs have effect on layout,views and partial views and will not affect any other ASP.Net Request.Browser related functionality.The overridden browser is stored in a cookie. Let me explain what some of these methods do. SetOverriddenBrowser() -  let us set the user agent string to specific value GetOverriddenBrowser() -  let us get the overridden value ClearOverriddenBrowser() -  let us remove any overridden user agent for the current request   To recap, in our ASP.Net MVC 4.0 applications when our application is viewed in our mobile devices, we can have a link like "Desktop View" for all those who desperately want to see the site with in full desktop-browser version.We then can specify a browser type override. My controller class (snippet of code) that is responsible for handling the switching could be something like that. public class SwitchViewController : Controller{ public RedirectResult SwitchView(bool mobile, string returnUrl){if (Request.Browser.IsMobileDevice == mobile)HttpContext.ClearOverriddenBrowser();elseHttpContext.SetOverriddenBrowser(mobile ? BrowserOverride.Mobile : BrowserOverride.Desktop);return Redirect(returnUrl);}} Hope it helps!!!!

    Read the article

  • Very very slow transfer speeds between Windows 7 and samba server running on Ubuntu 11.10/12.04 minimal

    - by kuzyt
    As mentioned in the title I tried transferring files between Windows 7 and the samba server running on both Ubuntu 11.10 and 12.04 but both showed very slow transfer speeds. Can someone please guide me in the right direction to debug this problem ? wget --output-document=/dev/null http://tokyo1.linode.com/100MB-tokyo.bin --2012-08-21 22:02:17-- http://tokyo1.linode.com/100MB-tokyo.bin Resolving tokyo1.linode.com (tokyo1.linode.com)... 106.187.33.12 Connecting to tokyo1.linode.com (tokyo1.linode.com)|106.187.33.12|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 104857600 (100M) [application/octet-stream] Saving to: `/dev/null' 8% [=============> ] 8,923,980 64.8K/s eta 15m 0s wlan0 IEEE 802.11abgn ESSID:"TNET" Mode:Managed Frequency:2.462 GHz Access Point: 58:6D:8F:26:20:7A Bit Rate=117 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=57/70 Signal level=-53 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:101 Invalid misc:2448 Missed beacon:0 03:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01) Subsystem: Atheros Communications Inc. Device 3112 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=128K] Expansion ROM at fea20000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

    - by Tassos
    I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

    Read the article

  • Broadcom BCM4331 not working on new Mac Mini 5,1

    - by Jon
    I can't seem to get my wireless card working on my Mac Mini 5,1. Lspci returns: 03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02) But running "additional drivers" doesn't detect anything. The nm-applet menu reads "device not ready--firmware missing." What can I do to get this to work? Note, this is with 12.04.1, so many of the previous discussions (for 11.10, etc) probably don't apply here.

    Read the article

  • Android 4 Fragments with Mono for Android

    - by Wallym
    With the release of Android 3.0, Google added support for larger displays and attention-grabbing UI designs and layouts. On a tablet screen, UI components can be used to present better information. How does Android do this? It has a technology called Fragments, and I'll look at its implementation in the currently shipping operating system, Android 4. (Let's get past all the jokes about Android and fragmentation on its device platform.)For more information on this, check out my article at Visual Studio Magazine - http://visualstudiomagazine.com/articles/2012/12/13/android-4-and-fragments.aspx

    Read the article

  • Tools to simulate mobile devices on a desktop to test websites

    - by Kris
    Are there any good tools that can be run on desktop machines (Windows or Linux) that can simulate a mobile device, preferably with some options as to screen size and mobile browser (user agent if not full render engine). I know it is never going to be perfect (especially without an actual touchscreen), but having a tool on our development machines to do what testing we can that way would be very useful.

    Read the article

  • I'd like to learn how to do mobile development - which competitions can I join to help me learn?

    - by Oscar
    I want to start learning mobile device development, but I am someone that gets much more motivated when there is some goal to reach. Because of that, I would like to join a competition. I know about Microsoft Imagine Cup, which is a very nice competition. Are there any another mobile development competition with a deadline in the next 6~8 months? I have been googling for them, but I could not find any, maybe someone knows about something that I couldn't find.

    Read the article

  • Solution For Printer Problems

    The Most Common Fixes For Printer Problems A Printer is a hardware device that gives an impression in a text or graphic format. In general, the printer is not part of your computer system; you have ... [Author: Kaisar Adnan - Computers and Internet - April 12, 2010]

    Read the article

  • Installed Ubuntu on a Intel I5 3330 (over a dh 77eb motherboard), networking fails

    - by Siddharth
    To my surprise network fails after Ubuntu installs. modprobe e1000, did not get networking to kick off modprobe e1000e, too did not load Searched for the drivers on the intel site, no linux drivers listed. lspci reports 00:19.0 Ethernet controller [0200]: Intel Corporation Device [8086:1503] (rev 04) Any idea on how to proceed ? Is there a place where I can map driver names (like e1000, e1000e) with the model numbers ?

    Read the article

  • Network Balancing Act

    - by listey
    Next up in our popular Oracle Solaris How To series is the Integrated Load Balancer, part of the suite of network facilities that are built in to Oracle Solaris 11. Providing Layer 3 and Layer 4 load balancing capabilities you can use this device to simulate or even replace your hardware based network infrastructure. Read more about the capabilities and how to get a basic configuration working in How to Set Up a Load-Balanced Application Across Two Oracle Solaris Zones

    Read the article

  • Developer Compensation System

    - by Graviton
    Joel wrote excellent articles on developer compensation system used at Fogcreek. As a team lead and business owner, I would like to device a system that would work best for my team. And here's the catch: I have no experience in managing a team before, and I don't know what works and what doesn't. So I would like to get as many references as I can on this matter. Is there other developer compensation systems that you find is working for you and your company?

    Read the article

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • No HDMI audio in 13.04

    - by King84
    I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

    Read the article

  • I Choose iNada

    - by Mark Treadwell
    As a laptop and Kindle user, I have been looking at the usual cyclical Apple frenzy in the press with the same kind of amused tolerance I give my three-year-old son.  They never seem to learn, and they keep repeating the same things.  However when I ready articles like this, I am reminded that that is not always the case. I am a happy user of a monster-sized HP HDX laptop, HP touch screen all-in-one system, and multi-screen Dell desktops at home as well as a HP business laptop at work.  I have no iPod, iMac, iTouch or any other relationship with the company who wants to trademark the prefix “i”. I have not missed them. That is not to say that I have no technological gadgets.  I do.  They just do not dominate Every company wants to preserve their customer base, but Apple just does it too rigidly.  The buy-in necessary rubs me wrong.  When the fanboys scream about the next great iApple thing which will kill off another market segment (this time, the iPad will kill off laptops), the amused tolerance returns. From what I have seen, the iPad virtual keyboard is a poor substitute for an actual keyboard.  It was intended to let you get some kind of text into a device that is not really intended for keyboard input, but rather for touch manipulation of a designed interface.  I like the virtual keyboard on my LG Dare cell phone, but you will not catch me writing my next novel with it.  But, you hear, you can connect a real keyboard and get info from another computer.  That is when you realize that the iPad is not a true standalone device like a laptop.  You have to make more hardware purchases to get what you truly want.  It is an expensive accommodation to get you a different form of freedom. So if Apple made a product with me in mind, you can have it.  Everyone gets to make their own choice.  My choice is the iNada.

    Read the article

  • What package is meant to replace thinkfinger in 11.10?

    - by misterhaan
    My laptop has a fingerprint reader that until 11.10 I used via thinkfinger. That package is no longer in the repositories, but I assume there’s a different package meant to support fingerprint readers in thinkfinger’s place. What is the recommended fingerprint reader package? Should I just find thinkfinger on my own and use that instead? Here’s my reader’s lsusb output: Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >