Search Results

Search found 5135 results on 206 pages for 'sbs 2003'.

Page 171/206 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Sparc v440 unable 2 boot after recommended patch install

  - by user100660

  After installing the October 2011 recommended patch bundle on a Solaris 10 the host fails to boot. The output is {0} ok boot SC Alert: Host System has Reset screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Sun Fire V440, No Keyboard Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.10.10, 8192 MB memory installed, Serial #54744555. Ethernet address 0:3:ba:43:55:eb, Host ID: 834355eb. Rebooting with command: boot Boot device: /pci@1f,700000/scsi@2/disk@0,0:a File and args: \ Evaluating: Out of memory Warning: Fcode sequence resulted in a net stack depth change of 1 Evaluating: Evaluating: The file just loaded does not appear to be executable. {3} ok If I do a boot -F failsafe the host come up and I'm able to mount the root device (ufs on /dev/dsk/c1t0d0s0) and nothing appears broken, i.e I can see the logfiles from the patch install etc. Root device still have 1GB+ free. Only 2 kernel patches was installed from the patch bundle: 144500-19 & 147440-02. Any hints how to debug it further, etc.

  Read the article

• In Windows 7, why can't I use perfmon against a remote server?

  - by SomeGuy

  I am on Windows 7 and trying to run perfmon against Windows 2003 and Windows 2008 servers. I am running into the same issue with all remote machines. When creating a data collector set, I specify a domain account that is in the administrators group on the remote machines (and "Performance Log Users" and "Performance Monitor Users" to be safe). On the "Available Counters" screen, When I type in a remote computer name, PerfMon locks up for a good 2-3 minutes before I can add any counters. I can then save the collector set. However, when I save it, the go/stop buttons are disabled if I click the set in the left panel, and missing if I click the Data collector set itself in the right panel. See the screens below. I can run data collector sets against my local machine with no problem. I am opening perfmon with my local account in both scenarios. I also have Remote Registry Service started on each remote machine. What is going on?

  Read the article

• DFS replication and the SYSTEM user (NTFS permissions)

  - by HopelessN00b

  Question for which I'm having trouble finding an answer on Google or Technet... Does granting the SYSTEM user permissions to DFS-shared files and folders have any effect on DFS replication? (And while we're at it, is there any good reason not to let SYSTEM have permissions to DFS-shared files?) It comes up because I have a collection of DFS namespaces and folders that I'm not able to make someone else's problem, and while troubleshooting a problem where one DFS replica just wasn't replicating with another for no discernible reason, I observed that the SYSTEM didn't have any permissions granted to any of the files or folders in the folder in question. So I set SYSTEM to have full control and propagated it down, and our DFS health diagnostic reports went from showing a backlog of ~80 files to a backlog of ~100,000... and things started replicating, including a number of files that had been missing on one server or the other (so more than just the permissions changes started replicating). Naturally, this made me curious as to whether or not DFS needs the SYSTEM account to have permissions to do its work, or if perhaps it was just any change to folder tree in question that prompted DFS to jump into action. If it matters, our DFS namespaces were set up under 2000/2003, and I have just recently finished upgrading all the servers to 2008 R2 or 2012 (with UAC enabled, blech), but have not yet gotten around to raising the DFS namespace functional levels to Server 2008. (And bonus points if anyone has an official Microsoft article on NTFS file permissions and the SYSTEM account as it pertains to DFS or network files.)

  Read the article

• Backing up SQL NetApp Snapshots using TSM

  - by WerkkreW

  In our environment we have a 3 node SQL 2005 Cluster which is on NetApp storage. We are currently using SMSQL (NetApp SnapManager for SQL) to take Snapshot backups of the data. This works great, but due to some audit requirements we are also forced to maintain some copies on tape. We have used NDMP in other places across the enterprise but we do not want to use it in this specific instance. Basically what I need to do is, get the most recent snapshot copy of the databases on tape, via Tivoli Storage Manager (TSM). What I have done is, obtained a basic Windows Server 2003 VM with SnapDrive installed, which is SAN attached and zoned to the NetApp, and I have written a batch file to do the following: Mount the latest __RECENT snapshot lun to the host, using a specific drive letter Perform a TSM based incremental backup Dis-mount the LUN This seems to work fine, except sometimes the LUN's do not mount due to some sort of timeout. Also, due to my limited knowledge of windows batch scripting, I have no way to monitor the success or failure of these backups since I do not know how to send a valid return code back to the TSM scheduling service. Is there a more efficient/elegant way to accomplish this without NDMP?

  Read the article

• Migrated SCOM 2007 R2 Reporting Services but reports are gone

  - by Gabriel Guimarães

  I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Any help is appreciated. Thanks in advance.

  Read the article

• 'Cannot get iis pickup directory' in Windows Server 2012

  - by Meat Popcicle

  Our system moved from Windows Server 2003(Enterprise SP2) & IIS 6. And new system is Windows Server 2012(Standard) and IIS 6(for smtp mail) & 8. I copied all of web application files and IIS settings, another function is ok but.. email system is something wrong. for example, --------------------------------------------------------------------------------------- exception: system.Net.Mail.SmtpException: cannot get iis pickup directory. line 284: SendMail sendmail = new SendMail(); line 285: sendmail.GetSendMail(messagefrom, Useremail, mailsubject, message); stack trace: [SmtpException: cannot get iis pickup directory.] System.Net.Mail.IisPickupDirectory.GetPickupDirectory() +1894 System.Net.Mail.SmtpClient.Send(MailMessage message) +1956518 CommonDll.SendMail.GetSendMail(String messagefrom, String Useremail, String mailsubject, String message) +466 ASP.common_users_courserecordadd_aspx.AddBtn_Click(Object sender, EventArgs e) in d:\"sourcefile.aspx":285 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +140 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981 Microsoft .NET Framework v:2.0.50727.6407; ASP.NET v:2.0.50727.6387 --------------------------------------------------------------------------------------- in Develop server(2008 R2 Ent SP1, IIS6 & 7.5), it works well. confused.

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• Apache+PHP on Windows Server 2008

  - by Álvaro G. Vicario

  I've installed Apache/2.2 and PHP/5.3 lots of times under Windows XP, Windows Vista and Windows Server 2003. The official *.msi installers work fine and configure everything. Now I need to install them into a Windows Server 2008 R2 Standard 64-bit box and I'm facing nothing but problems: There are no official 64 bit binaries for Apache and no binaries at all for PHP (official or third-party). It's alright, I'll do with good 32 bits, but it's kind of surprising. Official documentation is vague, generic and completely unaware of UAC or any recent Windows security feature. The PHP installer is unable to configure mod_php and the Apache installer is unable to configure... well, Apache. After three hours I've finally reached the point where I'm installing everything in the root folder and assigning full control access to all users in all files and directories and all I've got is a PHP-less Apache server that's able to serve static pages. So I guess it's time to stop and think. My question is: Has anyone installed an Apache+PHP production server under Windows Server 2008 in a serious, secure and reliable way and documented the whole process? Or should I just find a bundle like XAMPP and the like that requires no installation? === EDIT === I've installed Xampp Lite 1.7.3 and everything was working in 5 minutes. I'd still like to find some documentation about installing the original packages: XAMPP installs tons of stuff I don't need and offers no tool to enable and disable PHP extensions.

  Read the article

• Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

  - by jesse-mcdowell

  We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

  Read the article

• How do I stop MSYS from transforming my compiler options?

  - by Carl Norum

  Is there a way to stop MSYS/MinGW from transforming what it thinks are paths on my command lines? I have a project that's using nmake & Microsoft Visual Studio 2003 (yeecccch). I have the build system all ported and ready to go for GNU make (and tested with Cygwin). Something weird is happening to my compiler flags when I try to compile in an MSYS environment, though. Here's a simplified example: $ cl /nologo Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 13.10.6030 for 80x86 Copyright (C) Microsoft Corporation. All rights reserved. /out:nologo.exe C:/msys/1.0/nologo LINK : fatal error LNK1181: cannot open input file 'C:/msys/1.0/nologo.obj' As you can see, MSYS is transforming the /nologo compiler switch into a windows path, and then sending that to the compiler. I really don't want this to happen - in fact I'd be happy if MSYS never transformed any paths - my build system had to take care of all that when I first ported to Cygwin. Is there a way to make that happen? It does work to change the command to $ cl -nologo Which produces the expected results, but this build system is very large and very painful to update. I really don't want to have to go in and change every use of a / for a flag to a -. In particular, there may be tools that don't support the use of the - at all, and then I'll really be stuck. Thanks for any suggestions!

  Read the article

• Missing Home Folder XP Clients 2008R2 Domain

  - by minamhere

  We just completed a migration from Server 2003 to Server 2008R2. Everything seems to have gone well except that many of our desktops have stopped mapping the Home Folder as set in Active Directory. Other mappings that are defined on individual clients are mapping just fine, these mappings are all on the same file server as the failing Home Folders. Half of the users are on 1 file server and half are on another. Users from both servers are having this problem. I have enabled the Group Policy setting to "Wait for network before logging in". I enabled the policy to "Run Logon Scripts synchronously". There are no errors on the Domain Controller or either File Server. When I enabled Group Policy Preferences as an attempted workaround, I get this error: The user 'V:' preference item in the '<Policy Name>' Group Policy object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed. This seems to indicate that the network connection is not ready by the time Group Policy is processed. But isn't this the point of the "Wait before logging in" and "Run Logon scripts synchronously" settings? Some other background facts: The new Server 2008R2 installation is a Virtual Machine. It is on a new Subnet in a different building from the old server. DNS and DHCP were also migrated from the old DC to this new DC. These Home Folders were all working properly before the migration. Are there new security restrictions/policies in Server 2008R2 that might be causing this? Is there a way to check whether I have an underlying network connectivity issue? Maybe moving the server to the new building is causing a delay/timeout? Any thoughts or ideas on what could be causing this or how I can resolve this? Thanks.

  Read the article

• How do I host multiple independent, secured SharePoint sites (WSS 3.0) without using Active Directory on the same server?

  - by Kyle Noland

  I have a SharePoint site set up on one of my networks to service Active Directory users. To be clear, this is a Windows SharePoint Services 3.0 installation running on Windows Server 2003 Standard. It is not an option to upgrade the server or SharePoint version. Management would like to create several new sites, one for each of a handful of clients. These sites will be used like "dropboxes" or FTP sites so that my company can make large files available to outside contacts, and vice versa. Here are my requirements: I do not want to have to create Active Directory accounts for each external contact. If possible, I would like to store the external usernames and passwords in a database that I can write a small GUI for so that management can handle adding their own external contacts. Each client site must be sandboxed from each other and from my main company SharePoint site. I would like to keep everything running on port 80 and be able to access the sites as either clientname.mycompany.com or www.mycompany.com/clientname If anybody has ever done this I would really appreciate hearing about any lessons you learned and suggestions for how to set this up. Kyle

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• Can you make a Windows network default user profile NOT apply to a certain operating system?

  - by Jordan Weinstein

  I would like to create a network Default User account for Windows 7 only. This is on a Windows 2003 domain with servers from Windows 2000 to 2008 R2 and Windows XP on workstation side. We're about to do a full migration to Windows 7 and I'd like to start using the network default user profile functionality as we're not migrating user profiles over. Want everyone to start clean. I followed the simple steps from this page: http://support.microsoft.com/kb/973289 under the heading: "How to turn the default user profile into a network default user profile in Windows 7 and in Windows Server 2008 R2" but the problem is that profile would then apply to a new user\admin logging into a 2008 server. That's no good. Anyone have any ideas on how to limit what actually uses that network profile? I was thinking about setting deny permissions for all my admin\service accounts on that "\\dcserver\netlogon\Default User.v2" folder but then it might be timing out and cause other problems. Haven't tried yet as that seems like a bad way of making this work.

  Read the article

• schedule backup and restore of SSAS 2008 database

  - by Manjot

  Hi, I can backup and restore databases on Microsoft SQL server Analysis Service 2008 using GUI as from Backup SSAS I want to schedule backup and restore it to another server every night. so what i did is : I scripted out the backup and restore process from the GUI. Created a new SQL server agent job in database engine and added a "Run SSAS query" step. Copied the scripts to this step. But it fails. the scripts that the GUI copied out look like: <Backup xmlns="http://schemas.microsoft.com/analysisservices/2003/engine"> <Object> <DatabaseID>DB</DatabaseID> </Object> <File>C:\Backup\DB.abf</File> <AllowOverwrite>true</AllowOverwrite> </Backup> <Restore xmlns="http://schemas.microsoft.com/analysisservices/2003/engine"> <File>\\server\C$\Backup\DB.abf</File> <DatabaseName>DB</DatabaseName> <AllowOverwrite>true</AllowOverwrite> </Restore> Any help please?

  Read the article

• SQLVDI error - attempt to release mutex not owned by caller

  - by Chris W

  I've started getting some errors in the App event log of one of our database servers (Windows 2003 & SQL Server 2005). The nightly full database backups are completing successfully however immediately after the job success is written to the event log there is a run of entries that say: SQLVDI: Loc=CVDS. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. There's five of these logged - the server itself has more than 20 databases on it which are all backed up successfully. The server is backed up by Bacula using a VSS backup. Has anyone got any ideas what would be causing the errors? They seem to have started after a re-boot on Friday to install some patches which included KB960089. Edit: After getting the errors for a few days they've now stopped without any action on my part other than letting the backups continue as they were. It may be a coincidence but they stopped after Bacula completed its weekly full rather than the daily incremental backup.

  Read the article

• Is there a reason to use internal DNS over 8.8.8.8 ?

  - by skylarking

  I've inherited a LAN where there is really no name resolution being done for local resources... i.e. all users enter IP addresses manually to access printers and network shares. There are no LDAP servers or domains either....workstations simply connect to the network without authentication. DHCP is handled via a core switch... And DNS settings are also handed out by this same core switch. Currently, the DNS assignments are as such, and in this order: 10.1.1.50 / old Pentium III Windows 2003 box running DNS service- 128 MB RAM 169.200.x.x / ISP 4.2.2.2. / the well known public one There a couple thousand clients on the LAN....and most of the activity is web browsing ( this is an educational setting ). First of all, the server seems woefully underpowered for this task...yet there is virtually no slowness when web surfing by clients.... How much horsepower should a heavily used DNS server have ? I have also heard using 4.2.2.2 is a bad idea .... since it has been so overused... Finally, wouldn't it make sense to have a robust external DNS server listed first? ( Google's 8.8.8.8 would seem to be a logical candidate )

  Read the article

• Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

  - by Richard Maynard

  We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• Unusual Caching Issue with IE 7/8 and IIS 7

  - by Daniel A. White

  We recently moved a site into production running Server 2008 x64 and IIS 7. The ASP.NET pages apparently load just fine, but when it comes to IE 7 and 8, a weird caching issue has cropped up with the CSS and JavaScript files on the page. On a very sporadic schedule, IE does not get all the files necessary to compose the page (i.e. CSS and JS files). When I manually go to the missing files from the address bar, they come back from local cache as empty. I F5 these source files and magically they come down properly. I refresh the site after loading a few files and the cache seems to hold. This problem has only been reproduced (again, sporadically) on IE 7 and 8 running XP. Chrome and Firefox appear to be immune. We have set IIS to use server-side kernel caching for CSS, JS and images. We also have set to expire content for the App_Themes and Scripts directories to expire immediately. One initial thought it was a SWF loading an FLV on page load. These fixes have not remedied the problem. We had no problems on our staging server which is using Server 2003 and IIS 6. Any ideas would be greatly appreciated. P.S. It sounds similar to this problem: but we do have the Static Content module installed. http://serverfault.com/questions/115099/iis-content-length-0-for-css-javascript-and-images

  Read the article

• Use to host email for a domain name that wasn't our primary domain name

  - by drpcken

  Exchange 2007 on an Server 2003 active directory. My primary domain (MyMainDomain.com) controller also hosts dns and dhcp. I have a secondary domain name (MySecondDomain.net) that my Exchange Server allows emails from. It wasn't a physical domain, just accepted by exchange and setup as the Active Directory user's main smtp and outgoing address. Its MX records point to MyMainDomain.com's public exchange address. I've taken MySecondDomain.net and move the mail boxes to a hosted exchange 2010 environment. MX records now point to this new exchange system and when I send and email OUTSIDE the MyMainDomain.com environment (say gmail) it works and sends to the hosted exchange setup for MySecondDomain.net. however when I send an email from a user on MyMainDomain.com, it goes to the old exchange 2007 server I am hosting internally. I have removed MySecondDomain.net from the allowed domains, removed the DNS zone for MySecondDomain.net, and cleared DNS cache. I was convinced it was my internal dns server but I've cleared the DNS cache. Is there something I'm missing somewhere in exchange 2007? Or is it my domain controller/dns? Sorry if this is confusing. Thank you!

  Read the article

• How can ICS in Windows 7 be managed via command line, scripts, config files, etc.?

  - by Skya

  I've been using ICS successfully for years, but now I'm looking for a way to control it through something else than the GUI in Control Panel\Network and Internet\Network Connections - Connection Properties: I want to do everything that the encircled checkbox does, without touching the GUI. But what does the checkbox do? Microsoft don't provide specific information and the most helpful forum post I've found is from 2003. Assuming that some of the advice is still valid, I've come to the conclusion that ICS is broken down into 6 parts that have to be set up individually: the sharedAccess service interface settings firewall rules a static route dnsproxy autodhcp I've already learned that the service can be started/stopped with the command net start/stop sharedAccess and that netsh is a good tool for changing the interface settings and the firewall rules. But I don't understand how ICS handles routing and DNS. All hosts in my network are configured statically, so I don't care much about autodhcp. Thanks for your help! EDIT: I've spent the whole day scanning through ProcMon and I've seen reads/writes to both the registry and the filesystem and it is difficult to determine what parts of it actually make ICS work. I'm trying to look for an API instead. I'm looking into this right now, but I still want to know more about the inner workings.

  Read the article

• Redundant Microsoft server solution for small company

  - by MadBoy

  I'm planning to change one server Microsoft SBS 2003 with SharePoint, Exchange and SQL database into something that will provide me with some redundancy and won't be single point of failure. I was thinking to buy 2x exactly the same physical servers and put 2 virtualized servers on HyperV or VMWare on each. Then i would put SharePoint, Exchange and SQL on that 1 physical server (shared onto 2x VM's). I would like 2nd physical server to be exact duplicate of the first one so that when 1st server goes down (for reboot or hw failure), 2nd takes care of everything so that users don't even see anything changed (in terms all their emails, sharepoint stuff is available). My questions are: Will I have to pay for licenses for both servers even thou only one instance of SharePoint, Exchange, SQL will be used at same time? What are proposed solutions to do that? Any additional hardware I would need, any complicated software configuration to be expected to configure such redundancy so that when one physical server goes down 2nd one is taking care of rest? What problems should I expect? This solution is for 60 people. Later on it may or may expand.

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

• Terminal server performance over high latency links

  - by holz

  Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >