Search Results

Search found 14598 results on 584 pages for 'address'.

Page 174/584 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• Remote connection IP to use

  - by petwho

  I have two laptops that both run on ubuntu and installed ssh server and ssh client on them. One is usually on my desk at home and one I usually bring to my company. When I'm at home I can easily ssh to one from the other by typing this command (to login to the other laptop whose IP address is: 192.168.0.105) : ssh -p 22 [email protected] However, When I'm at my company, I try to type the same command and ofcourse it doesn't work. I understand that when at home I'm on LAN network, that my laptops actually using my ISP's address which differ from 192.168.0.107 asummed 203.113.131.1. So could you tell me what IP that ssh shoud use for my laptop (at work) to connet to my computer at home? Thank you.

  Read the article

• IPSEC tunnel Fortinet Transparent Mode to inside Fortinet firewall in NAT Mode does not respond to i

  - by TrevJen

  I have 2 fortinet firewalls (fully patched); fw1 is providing an IPSEC tunnel in transparent mode. beneath this firewall is a fw2, a NAT firewall with a VIP address that has been confirmed to work. This configuration is required for my customers who want to connect to a public address space inside of the tunnel, in order to prevent cross over in IP space. This configuration works great for traffic going outbound to the remote side of the tunnel, but not inbound. While sniffing the traffic, I can see the inbound traffic going out of the fw1, but it is never seen at the fw2. Cust Net > 10.1.1.100 | | | FW1 >TRANSPARENT IPSEC | | | FW2 EXT >99.1.1.1.100-VIP | FW2 NAT >192.1.1.100-NAT

  Read the article

• Not receiving bounced emails from PHPList

  - by user1780242

  I am sending a test campaign to my own address and to a fictitious nonsense address and I am receiving the email at my account but I am not receiving any bounces. My settings in the config.php file are: $message_envelope = '[email protected]'; $bounce_protocol = 'pop'; $bounce_mailbox_host = 'localhost'; $bounce_mailbox_user = '[email protected]'; $bounce_mailbox_password = 'XXXXXX'; What's the next step in figuring out the problem? I also tried both variations of the following: $bounce_mailbox_port = "110/pop3/notls"; #$bounce_mailbox_port = "110/pop3"; I am running a Godaddy Centos 6 VPS and Plesk 11.

  Read the article

• Postfix + Exchange + ActiveDirectory

  - by itwb

  Client has got many sub-offices, and one head office. Headoffice has a domain name: business.com all users in the many sub-offices need to have a headoffice email address: [email protected] Anyone not in head office will need the email forwarded to an external email address. All users in head office will have their email delivered to exchange. Users are listed in active directory under 2 different OU's. "HeadOffice" or "SubOffice". Is this something able to be configured? I've done some googling, but I can't find any examples or businesses set up this way. Thanks

  Read the article

• DNS resolution over DHCP

  - by Eric

  I have a m0n0wall router a VMWare workstation running ubuntu a windows 7 workstation running the VM The ubuntu hostname is "renraku" From the windows machine I can't resolve dns automatically for this host. For example, when I ping renraku Ping request could not find host renraku. Please check the name and try again. However nslookup seems to work nslookup renraku Server: m0n0wall.local Address: 192.168.123.254 Name: renraku Address: 192.168.123.248 I don't get how to have ping to work with hostnames. The main goal behind this is to have my web server to work with hostnames instead of ip addresses EDIT : ping 192.168.123.248 works

  Read the article

• ASA 5510 Need to filter traffic log events to my iPhone

  - by drpcken

  For some reason I cannot update apps or download apps to any ios devices on my network (tried both iphone and ipads). When I'm at home on my own network everything works fine. This started about a week ago. I've configured my iphone with a static IP address and even used 4.2.2.2 as my dns to rule out that the issue is with my DNS Server. I'm looking at the SYSLOG in ASDM (Cisco ASA 5510) but Im not sure it is providing me enough info. It seems to be showing ACL blocks on my public ip address, but not individual client IP's, so I can't see whats going on. How can I setup a way to filter any incoming/outgoing traffic to my iPhone's static IP and try and troubleshoot this?

  Read the article

• CNTLM issue with intranet (maybe DNS)

  - by htorque

  On my Linux box I need to use an ISA proxy that requires authentication to reach the internet. I therefore installed CNTLM and configured it to point to the proxy address and listen on port 4321. I then configured my GNOME distribution to use localhost:4321 as global proxy for HTTP and HTTPS. The result: I can connect to the internet. I can ping intranet IPs, I do receive name resolution for intranet sites, yet I cannot ping them or open any intranet site in a browser (configured to use the distributions proxy) unless I use the site's IP address. I tried blocking the intranet IP range in the CNTLM config file without luck.

  Read the article

• MikroTik ipv6 Tunnel

  - by MikeSmitty

  I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that I can ping any ipv6 address fine, but give it a little time (say, maybe 30 sec) and I can't ping any ipv6 addresses again. Whenever it stops allowing ping to go through I notice the counter on my firewall rule that drops invalid connections goes up. this is my ipv6 firewall config: add action=accept chain=input comment="" connection-state=established \ disabled=no in-interface=sit1 add action=accept chain=input comment="" connection-state=related disabled=no \ in-interface=sit1 add action=accept chain=input comment="" disabled=no in-interface=bridge \ src-address=ipv6_address_here/64 add action=drop chain=input comment="" connection-state=invalid disabled=no \ in-interface=sit1 add action=drop chain=input comment="" disabled=no in-interface=sit1 Any ideas on what it could be?

  Read the article

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• DNS servers via RA in IPv6

  - by glglgl

  Some time ago, RFC 6106 was created, which states how a router tells the clients about the DNS server to be used. It is a new standard, it has to be implemented, which needs time etc. I'm courious about the need for it: wouldn't have it been better to define a "globally valid" anycast address for DNS? Queries would be sent to this address and would be promoted along the default route until there is a host which claims to be responsible for it. In an enterprise network, that would be a central DNS server (or even more, on really big companies); in a SOHO network, it would either be the router or the DNS server of the ISP, in a root server hosting data center, it would be the DNS of the hoster, etc. What do I see wrong here? Do I have a wrong view of the anycast concept?

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Need help setting up mail DNS records

  - by Dave

  Hi, We are hosting our web site on host monster, but want our email to continue to be hosted at the old site. Our domain points to the hostmonster DNS servers, but I can't figure out the right configuration for the remote email servers. We have one MX entry, which is priority: 0 domain: ourdomain.com And then we have these DNS entries ... name: mail.ourdomain.com ttl: 14400 class: IN type: A record: old.host.ip.address name: mail1.ourdomain.com ttl: 14400 class: IN type: A record: old.host.secondip.address Can someone tell me what I need to add/edit to get mail to correctly route to our old host? Thanks, - Dave

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• Dual Home HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Best practices for mass email platform

  - by Niro

  I am in the process of setting up mass email service. My question is: what are the best practices to achieve maximum deliver-ability. More precisely - what should I do/know to prevent spam filters from blocking the emails (the emails are not spam). for example- how can I tell if my IP address is blacklisted somewhere and how can I prevent it from becoming blacklisted. Is amazon web services a suitable platform due to dynamic IP addresses, what are the restrictions on the from address, can it be different from the mail server domain.... you get it....

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Converting my PC to a server

  - by Sean87

  I live in a university campus and luckly I have super fast internet in my room, with a static IP address. I tried to setup XAMPP and by pointing to my IP address from anywhere I can access the services running on my PC. Now I am thinking of hosting my own website on my own PC. I am not sure what else I will need (beside the static IP) to make this happen (if it is possible at all). I am running Windows 7 ultimate and of course I do have a domain registered. What should I point my domains DNS names to make this happen (I assume it is far more steps involved!)

  Read the article

• Why the huge difference between etch and lenny MySQL

  - by rmarimon

  I've been working on a program for the last year. The development environment is working with a database in MySQL running on debian etch version mysql Ver 14.12 Distrib 5.0.32, for pc-linux-gnu (i486) using readline 5.2. The production environment is working on debian lenny with version mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using readline 5.2. I was just timing some database access and what takes in the development environment 150 seconds, takes 300 in the production environment. I checked the /etc/mysql/my.cnf files on both systems and the only differences are # development bind-address = 10.168.1.82 log_bin = /var/log/mysql/mysql-bin.log # production bind-address = 127.0.0.1 myisam-recover = BACKUP #log_bin = /var/log/mysql/mysql-bin.log I dump a database from the production and load it into the development and with the same server everything takes half the time !!! What should I check?

  Read the article

• On a router, how do I block wan access for a particular machine without blocking its access to the local network?

  - by HappyEngineer

  On my tp-link TL-WR1043ND router I want to prevent a particular machine from having access to the WAN while still allowing that machine to access other machines on the LAN. My assumption is that I need to do something in the "Access Control" section, however the problem is that it wants an ip range or domain name for the target of the rule. The router uses DHCP to get an address from the WAN, so I don't have any guarantee what the ip address of the wan will be. If the answer is that it's not possible with this router, could someone describe how to do it using OpenWRT instead?

  Read the article

• Rewriting URLs from subdomain to domain in Apache

  - by Nazgulled

  Hi, My webserver is running Plesk and part of my site structure goes like this: / /httpdocs (domain root folder, URL: http://www.domain.com) /subdomains /subdomains/blog/httpdocs (blog root folder, URL: http://blog.domain.com) I have a WordPress installation in the domain root folder and WP is configured to display a static page when accessing www.domain.com and to display the blog when accessing www.domain.com/blog. However, I want to redirect (using mod_rewrite) all requests from http://blog.domain.com/ to http://www.domain.com/blog/. A few examples: Accessing http://blog.domain.com/archives should access http://www.domain.com/blog/archives/ Accessing http://blog.domain.com/tag/abc should access http://www.domain.com/blog/tag/abc/ Accessing http://blog.domain.com/some-post-title should access http://www.domain.com/blog/some-post-title All this should be transparent to the user, the address shouldn't be changed on the browser's address bar. In better words, I want a URL rewrite and not a URL redirect. Is this achievable with mod_rewrite? Can anyone help me with the .htaccess? All my attempts on doing so have failed...

  Read the article

• No Internet connectivity to linux container on Debian

  - by kirankumar

  I have created a linux container with debian-wheezy template. I am not able to have internet connectivity from the container. Below is my network configuration. Could some one please help me in figuring out the issue ? I can ping to the eth0 ip address in the container from the host. Similarly, i can ping from container to br0 ip address on the host. /etc/network/interfaces on host =============================== # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 auto eth0 iface eth0 inet dhcp # bridge configuration auto br0 iface br0 inet dhcp bridge_ports eth0 vethCE2 bridge_fd 0 bridge_stp off bridge_maxwait 0 ifconfig -a output on host ========================== ifconfig -a br0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e inet addr:10.0.0.11 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:615e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:422 errors:0 dropped:0 overruns:0 frame:0 TX packets:266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:174110 (170.0 KiB) TX bytes:31582 (30.8 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13017 errors:0 dropped:0 overruns:0 frame:0 TX packets:6210 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7944745 (7.5 MiB) TX bytes:1368421 (1.3 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:835 errors:0 dropped:0 overruns:0 frame:0 TX packets:835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:91148 (89.0 KiB) TX bytes:91148 (89.0 KiB) vethCE2 Link encap:Ethernet HWaddr fe:3a:43:52:14:49 inet6 addr: fe80::fc3a:43ff:fe52:1449/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:205 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2660 (2.5 KiB) TX bytes:31133 (30.4 KiB) brctl show output on host ========================== bridge name bridge id STP enabled interfaces br0 8000.080027bd615e no eth0 vethCE2 /etc/network/interfaces on container ======================================= auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.99 netmask 255.255.255.0 network 10.0.0.0 ifconfig -a output on container =============================== root@CE2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:00 inet addr:10.0.0.99 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:22ff:fe33:4400/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:198 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30121 (29.4 KiB) TX bytes:2660 (2.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2366 (2.3 KiB) TX bytes:2366 (2.3 KiB) Networking content of /var/lib/lxc/CE2/config ============================================== # networking lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethCE2 # It is fine to be commented out #lxc.network.ipv4 = 192.168.10.21/24 # Change this lxc.network.hwaddr = 00:11:22:33:44:00 Let me know if you need any other details. Thanks, Kiran Kumar

  Read the article

• How to configure DNS so that www.example.com goes to one server, *.example.com to another

  - by fishwebby

  I'm trying to set up my domain as follows, but I'm not actually sure if it's possible. I have a domain where I would like the base and www addresses to go to my static site, but others to go to my application server. For example: My domain is registered with Dreamhost, and my application is on a VPS at Webbynode. I've set up the domain in Dreamhost to use Webbynode's nameservers: ns1.dnswebby.com ns2.dnswebby.com ns3.dnswebby.com And in Webbynode I've set up a wildcard A record to point to the IP address of my VPS: * 1.2.3.4 A and this works nicely, if I go to app.example.com it resolves to my application server at Webbynode. However, what I'd like to do is have example.com and www.example.com go to my static site, hosted back at Dreamhost, whilst still having any other domain go to my app. What I've done to try and achieve this is set up these DNS "NS" entries at Webbynode, trying to get Dreamhost to resolve these domain names: (empty) ns1.dreamhost.com NS (empty) ns2.dreamhost.com NS (empty) ns3.dreamhost.com NS www ns1.dreamhost.com NS www ns2.dreamhost.com NS www ns3.dreamhost.com NS (I don't have a fixed IP address at Dreamhost so I can't just set up simple A records). However this doesn't work... does anyone have any idea if this is possible and if so how it could be done? Update: I've got this working now, as above for the domain (i.e. registered with Dreamhost, but using Webbynode's nameservers). To delegate the DNS for www.example.com to Dreamhost, I've got the following DNS entries set up: www.example.com. ns1.dreamhost.com. NS www.example.com. ns2.dreamhost.com. NS www.example.com. ns3.dreamhost.com. NS (note the full stops at the end) And to get example.com to resolve to my static site, I set up CNAME record: example.com. www.example.com. CNAME So now, example.com and www.example.com go to my static site on Dreamhost, and if they change the IP address of my shared hosting it won't affect me, and all other subdomains go to my application server. This seems to work nicely, but if anyone knows a better way to do it I'd be happy to hear it. Thanks to all who replied.

  Read the article

• How do I configure networking when using XEN on 12.04 Server

  - by Ingram

  I'm following this guide, https://help.ubuntu.com/community/XenProposed, and I'd like to setup a static IP address, but I don't know how. I'm using 12.04 Server. This is the step I'm having trouble at (I'm using eth1): Edit /etc/network/interfaces, and make it look like this: auto lo iface lo inet loopback auto xenbr0 iface xenbr0 inet dhcp bridge_ports eth0 auto eth0 iface eth0 inet manual I do this, and here is my output from ifconfig: eth1 Link encap:Ethernet HWaddr 00:17:a4:f8:79:20 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:478264 errors:0 dropped:0 overruns:0 frame:0 TX packets:2895 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:46470058 (46.4 MB) TX bytes:214620 (214.6 KB) Interrupt:17 Memory:fa000000-fa012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) xenbr0 Link encap:Ethernet HWaddr 00:17:a4:f8:79:20 inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::217:a4ff:fef8:7920/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:471842 errors:0 dropped:0 overruns:0 frame:0 TX packets:2795 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:37005780 (37.0 MB) TX bytes:182010 (182.0 KB) So how do I give this system a static IP address? Sorry, I'm not that familiar with networking on Ubuntu.

  Read the article

• Linux: find thin server running on port 80 and kill it

  - by Andrew

  On my Linux server I ran: sudo thin start -p 80 -d Now I'd like to restart the sever. The trouble is, I can't seem to get the old process to kill it. I tried: netstat -anp But what I see on port 80 is this: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - So, it didn't give me a PID to kill... I tried pgrep -l thin but that gave me nothing. Meanwhile pgrep -l ruby gives me like 6 processes running. I don't really understand why multiple ruby threads would be running, or which one I need to kill... How do I kill / restart the thin daemon?

  Read the article

• Lingering tcp connection in LISTEN state

  - by Silvio Donnini

  My java application can sometimes be killed by an external script. This can be done either with SIGTERM or with SIGKILL. The application is a server which receives many connections per second, and it can be killed while trying to serve them. I would like to restart the application whenever it's killed, so I have prepared a script for that purpose. The problem is that, once the app has been killed, the new application instance can't bind to the port used by the previous instance, because the "Address is already in use". The previous instance's process has been definitely terminated, anyway the offending listening port is still there, but it is assigned to bash (or sh on other machines). Obviouly, my goal is to restart the application and let it bind successfully to the previous address. I've tried waiting more than 200 seconds before restarting to no avail, anyway I can't afford to wait that much. I've encountered this problem on all the machines I've ran the application (which is a jetty server with java 1.6). Any suggestion is appreciated, thanks, Silvio

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >