Search Results

Search found 5373 results on 215 pages for 'wireless bridge'.

Page 174/215 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• DSL connection dropping when starting game

  - by bootoo

  New connection set up last week - have called tech support, signal fine, sending out tech guy tomorrow - however i cant make sense of this using Vista, 2wire connection 6mb ATT conn, wireless, i can browse website, stream video from my PC wirelessly to my xbox, watch Hulu in high res, connection seems fine I load up World of Warcraft, i select Enter World and without fail my 2wire modem 'DSL' light goes red, my internet light goes out, im no longer connected, then after 10 or 15 seconds it works again, but game has kicked me Noticed the same thing on opening or closing Utorrent as well No other phones/devices plugged into the phone jacks in the apartment - why would joining a game cause my DSL to drop? i can only guess it throws a bunch of information to the server when i hit 'enter world' and that causes an issue that shuts my connection down or my router hates me - all help appreciated

  Read the article

• internet access options in remote area? (read: no comcast,qwest, etc)

  - by freedrull

  Currently I am living in a fairly "remote" area, in the countryside, and cable internet access through the typical companies like comcast and qwest is just not available here. I've been trying to research other options for fast internet access. There are some small cable companies but they currently do not offer broadband access here. I thought about maybe buying a 3g phone with a data plan and doing some sort of tethering, or perhaps getting an android phone and using it as a wireless AP. This would of course depend on 3g being available here. The only other thing I can think of is some sort of satellite internet service, or doing something crazy like adapting wifi over am radio. Anyone have any ideas, at all, short of moving somewhere else?

  Read the article

• Block P2P traffic on a Linksys router WRT54G with tomato firmware

  - by Kami

  Hi, I'm running a small wireless network (6 to 10 users) on a Lynksys WRT54G with tomato firmware sharing an internet connection. I don't want the users to download files with bittorrent (mainly used) and other p2p apps. I've also found some solutions about lowering p2p traffic priority using QoS. I really need to BAN p2p traffic. Does anyone know how to setup some rules to deny that kind of traffic ? I've tried to setup an Access Restriction Rule: But it's not working at all ...

  Read the article

• How share internet connection between two laptops

  - by danielgratzz

  I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

  Read the article

• Why every change in Asus UX50v causes screen resolution get lost?

  - by Kaveh Shahbazian

  Why every change in Asus UX50v causes screen resolution get lost? Installing a new application, connecting to another wireless network, change some settings, ... causes this problem. For example after installing an application, UX50v needs to restart. And when it got restarted, resolution would be set to 640x480(or 600x800) and Hibernate and Sleep options are disappeared from shutdown menu! (I have other problems with this Asus UX50v crap too - like I can't update windows 7 because it crashes on Asus UX50v crap - but this one is absolutely ridiculous and stupid!)

  Read the article

• ADSL with RFC 2684 Bridging

  - by Axel Isouard

  My new ADSL line is now enabled, I can finally use my Netgear DM111Pv2 to use to the Internet. My ISP has told me a big surprise : I don't need to use a login and a password to connect to the Internet, then I must use the RFC 2684 bridging mode. It works pretty fine on the ADSL modem's side, but I've spent one night trying to figure out how to connect to the Internet through this modem. I only have a Fonera 2.0n and a computer running Gentoo Linux. I've been trying to use the br2684ctl utility with brctl on my Gentoo, first I've configured my kernel in that way : CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set CONFIG_PPP_MPPE=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPPOATM=y CONFIG_PPPOE=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y [...] CONFIG_ATM=y CONFIG_ATM_CLIP=y CONFIG_ATM_CLIP_NO_ICMP=y CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set And I still get these messages : cirus nais # br2684ctl -b -c 0 -e 0 -a 8.35 br2684ctl[8041]: Interface "nas0" created sucessfully br2684ctl[8041]: Communicating over ATM 0.8.35, encapsulation: LLC br2684ctl[8041]: Fatal: failed to connect on socket; No such device The brctl utility keeps telling me "Invalid argument" each time I try to add the nas0 interface into my bridge, I'm honestly hoping I'm doing wrong. I've been following this README carefully and this tutorial on setting up a PPPoE connection with Gentoo, but the PPPoE interface just tries to start, and nothing special related to PPP happens, I can't see the interface when I do ifconfig. So, I'm asking you if there's something huge I've been missing since the beginning ! Maybe I should wait to buy a new router fully supporting the RFC2684 bridging mode, but I'm more interested in setting up this mode on my Fonera 2.0n and even my Raspberry Pi !

  Read the article

• Can't connect to a share.

  - by AngryHacker

  Hello, I have a laptop with a Windows XP Tablet Edition installed. I have several users setup on the laptop (mostly me and my kids). When I try to connect to its administrative share via \DadLaptop\c$ from a Windows 2000 Professional machine, it prompts me for a user name and password. However, after I enter it, it always tells me "incorrect password or unknown username". As a test I setup another share, called "test" and tried to connect to that. It worked fine, didn't even ask me for a password, just connected to it and that's that. All the networking is wireless. I am connecting with an admin account (admin on the target computer). What am I missing? Why can't I connect to an administrative share?

  Read the article

• How to automate changing my ip?

  - by callisto

  I am very new to OSX. I will use my MBP at work and home. I would like to be easily able to switch my ip when changing location. Thus far I have dabbled with the automator, hoping to do something like this: [pseudocode] If IP = 192.168.0.10 root# changeip 192.168.0.10 10.0.0.15 else root# changeip 10.0.0.15 192.168.0.10 The reason for this is that my IP from home will not allow me access at work and vice versa. I have friends and family who drop in now and then, multiple wireless devices set up for the home IP range. Changing all of that to accommodate one new device (the Macbook) would make me reconsider my foray into OSX. I'd rather have the MBP adapt to me than I to it.

  Read the article

• Help changing MAC address in Windows 7 [closed]

  - by Niphoet

  Possible Duplicate: Change MAC Address I need to change the MAC address of my wireless adapter in Windows 7 (Ultimate RTM). I used to do this in XP both directly in the registry editor and with a .REG file I wrote. I have used each of these methods in Windows 7, as well as a few tools I found that are supposed to do this. Every time I change it, I disable and re-enable the network adapter in control panel, but upon running ipconfig /all it still shows my old MAC address. Any help? By the way, I do have Administrative Rights and UAC turned off.

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• Two network cards in one Windows 7 PC

  - by Martin

  Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

  Read the article

• Recovering drivers from previous installation?

  - by Walkerneo

  Yesterday I bought a new computer and I've been setting it up since this morning. The hard drive came with windows 7 home premium (x64) installed, but I decided to instead install windows 7 ultimate (x64) - this is what I'm currently using. Unfortunately, there were some drivers that were installed that I need in this installation. I only notice because the computer doesn't have the ethernet drivers, so I'm only able to connect to the internet via wireless. There are other drivers missing as well, but I'm not yet seeing the effects. I still have the Windows.old folder with the previous installation, which has the drivers. Is there any way to copy the necessary ones over? I tried the options for updating driver software through device manager with the path set to System32\drivers of the old installation, but it didn't find anything.

  Read the article

• HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

  - by joelarson

  I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

  Read the article

• Windows 7 Connection Sharing unable to access some sites

  - by Kristopher Ives

  I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• iptables forwarding between two interface

  - by broody

  So I have a linux box with two wireless interfaces, one is a station and the other an AP. wlan0 (station) - Connected to the internet connection wlan1 (AP) - Other clients connect to it. I would like for clients connected to wlan1 to be able to access the internet on wlan0. And I'd like to do this with iptables as my kernel doesn't have bridging support... Here's what I've tried so far with iptables but it's not working: iptables -A FORWARD -i wlan0 -o wlan1 -j ACCEPT iptables -A FORWARD -i wlan1 -o wlan0 -j ACCEPT I'd appreciate any help.

  Read the article

• Domain connection shows as "unauthenticated"

  - by gareth89

  I have seen various different questions for this problem floating around but either the circumstances arent the same or the solution doesnt work so thought i would post it to see if anybody has any suggestions. Various domain PCs and laptops appear to randomly give the connection name of "lewis.local 2(Unauthenticated)" - lewis.local being our domain - and provides an exclamation mark where the network type logo is normally shown. This also appears to happen every time connecting via vpn. Our setup is: 2 servers both running windows server 2003 R2 (x32) main server has AD, DNS and DHCP installed IPv4 on approx 30 client machines (some wired, some wireless) If anybody has any thoughts on solutions i would appreciate it. I have tried removing all but AD server roles, resetting all of the systems and nothing. It doesnt prevent anything from working just like a domain connection most of the time however it is getting fustrating! Also dont know if it could have anything to do with it but the DHCP server seems to have quite a long lead time on issuing the IP address to the client.

  Read the article

• ICS as guest in Ubuntu 12.04 host

  - by oshirowanen

  I have installed Android as per this guide as a guess os via VirtualBox: http://www.android-x86.org/documents/virtualboxhowto Using the following ISO: android-x86-4.0-RC1-eeepc.iso But I am unable to connect to the internet from within the android virtual machine. The host OS is Ubuntu 12.04 where the internet works fine. I have internet access via a usb wireless connection to the home router. All this is fine. If I install Ubuntu 12.04 as a guest, where the host is also Ubuntu 12.04. The guest os'es internet works fine out of the box. But for some reason, I can't get the above androids internet to work out of the box as the guest os. Anyone know what I am doing wrong?

  Read the article

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Extend my LAN network

  - by user268291

  i have a patch panel and hardwiring already setup in my office. The patch panel is 24-port and all the ports are engaged. All my switch ports are engaged. Now, I have a printer connected to a wall point (RJ45) which I want to shift to a new room where there is no LAN setup. I want to have two RJ45 wall plugs in the new room so that I can connect one RJ45 port to have my LAN in the new room and the other RJ45 wall port I want to use for my printer. There is no option other than LAN (no wireless). Please help me and tell me how do I get the two RJ45 wall plate plugs in the new room up and keep my LAN running. It is a little urgent for me. Please help.

  Read the article

• Network config for KVM on physical machine with single NIC and single public IP

  - by neo0

  I have a physical machine running CentOS 6.4 and I will rent a place to run it in a data center. I want to install KVM on that machine to run some virtual machines. The problem is my physical machine have only one NIC and the data center give me a public IP for that interface. So how should I configure network on the physical machine to make it assign for each vm a private IP that can connect to Internet. If I create a br0 bridged with eth0 interface and create a vm with option --bridge=br0 then KVM could not assign an IP for the vm so setup can not be done. Should I use NAT mode? Does KVM have any host-only network like Virtualbox? But the vm still has to connect to outside? Thank you! Update I install the guest network using NAT (--network network:default) and then I only have to port-forwarding from the host. But if I config br0 bridged with physical eth0 then the guest can not get an IP from boot. So I removed the br0 and it worked.

  Read the article

• Xen networking is inconsistent in multiple ways

  - by WildVelociraptor

  I've been running xen for a few weeks now on an Ubuntu 12.04 server. I've got 3 guests: a Windows Server 2003 guest, an Ubuntu guest, and a Windows 7 Guest. My Server 2003 guest seems to work fine; I can ping it from the network, the hostname resolves correctly, and it can see the internet. This guest is attached to xenbr0, and its IP is 10.100.1.21. My Win7 guest is what is driving me crazy. I use the same configuration script as a base, changing the important parts (hostname and boot disk, mainly). It installed correctly, and is currently running, but I am unable to ping this guest. It's hostname is "alexander", with an IP of 10.100.1.22. It is also using xenbr0. The guest can ping the firewall and various IP addressess, but seems unable to resolve hostnames. Now heres the weird part: when I use rdesktop (RDP client) from my laptop (not the xen host) to connect to alexander, it works just fine. It apparently resolves the hostname fine, and does the same with the IP address. So, can someone tell me why I can access this guest using RDP, but not using ping, nslookup, traceroute, etc? It's apparently invisible to all but RDP. Also, is it okay to use two guests on the same bridge, or do i need different ones for each guest? Thanks in advance for any help. Regards

  Read the article

• Using AddEncoding x-gzip .gz without actual files

  - by STATUS_ACCESS_DENIED

  With Apache (2.2 and later) how can I achieve the following. I want to transparently compress using GZip encoding (not plain Deflate) the output when a certain file is queried with its name plus the extension .gz, where the .gz version doesn't physically exist on disk. So let's say I have a file named /path/foo.bar and no file foo.bar.gz in the folder to which the URI /path maps, how can I get Apache to serve the contents of /path/foo.bar but with AddEncoding x-gzip ... applied to the (non-existing) file? The rewrite part appears to be easy, but the problem is how to apply the encoding to a non-existent item. The other way around also seems to be simple as long as the client supports the encoding. Is the only solution really a script that does this on the fly? I'm aware of mod_deflate and mod_gzip and it is not what I'm looking for - at least not alone. In particular I need an actual GZIP file and not just a deflated stream. Now I was thinking of using mod_ext_filter, but couldn't bridge the gap between rewriting the name of the (non-existent) file.gz to file on one side and the LocationMatch on the other. Here's what I have. RewriteRule ^(.*?\.ext)\.gz$ $1 [L] ExtFilterDefine gzip mode=output cmd="/bin/gzip" <LocationMatch "/my-files/special-path/.*?\.ext\.gz"> AddType application/octet-stream .ext.gz SetOutputFilter gzip Header set Content-Encoding gzip </LocationMatch> Note that the header for Content-Encoding isn't really needed by the clients in this case. They expect to see actual GZIP files, but I want to do this on-the-fly without caching (this is a test scenario).

  Read the article

• Intel Atom overheating in ASUS EEE Box 1501P

  - by Sergey L.

  I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >