Search Results

Search found 5373 results on 215 pages for 'wireless bridge'.

Page 175/215 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Windows 7 recognises the wrong router.

  - by Henry

  I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

  Read the article

• Setting up Windows SBS 2008 network on Xen

  - by samyboy

  I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

  Read the article

• Software solution to switch between computers using KVM switch

  - by user71737

  I am using a Fling KVM switch (by Belkin), to connect 2 computers to my monitor One computer is running XP and the other is running Linux My wireless switching mechanism has just gone the way of the saints but Belkin has kindly supplied a software solution for this occurrence. There is a small app called Fling (surprising) that allows me to switch from the XP machine to the Linux machine but nothing to switch back to the XP. What I need to know is there a similar app for the Linux computer. (NB I have tried Synergy but have no idea how to set it up - I've been told that synergy might work). Thanks in advance Norm

  Read the article

• How to set up DHCP-configured access through a Linux box?

  - by marcusw

  I would like an old desktop box to use my laptop as a router to access the internet. Here is my setup: I have one ethernet port in the side of my laptop which I want to use to get internet access to my desktop computer. The laptop is connected to the LAN via a wireless link. Both systems run Linux. The desktop autoconfigures itself using DHCP. The laptop is a Kubuntu system. I do not have any crossover cables, though wireshark on the laptop sees the DHCP requests from the desktop just fine, so I doubt that I need one. What do I have to do to make this work?

  Read the article

• UNRAID V4.7: Lost write permission on Win7/Android devices

  - by JROC

  I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

  Read the article

• UNRAID V4.7: Lost write permission on Win7/Android devices

  - by JROC

  I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

  Read the article

• Blocking internet poker applications

  - by Matthew Savage

  I 'look after' the wireless internet for a cafe where I live, and we've noticed that there's quite a substantial slow down of internet speeds when certain users are playing internet poker. I've put in filters to block any HTTP traffic referencing gambling and poker etc, however I want to be able to block any applications (i.e. poker clients) which don't use HTTP. I've tried searching around for a list of poker clients and perhaps their ports, but have had no real luck. Does anyone know what these might be?

  Read the article

• GlusterFS is failing to mount on boot

  - by J. Pablo Fernández

  I'm running the official GlusterFS 3.5 packages on Ubuntu 12.04 and everything seems to be working fine, except mounting the GlusterFS volumes at boot time. This is what I see in the log files: [2014-06-13 08:52:28.139382] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.0 (/usr/sbin/glusterfs --volfile-server=koraga --volfile-id=/private_uploads /var/www/shared/private/uploads) [2014-06-13 08:52:28.147186] I [socket.c:3561:socket_init] 0-glusterfs: SSL support is NOT enabled [2014-06-13 08:52:28.147237] I [socket.c:3576:socket_init] 0-glusterfs: using system polling thread [2014-06-13 08:52:28.148183] E [socket.c:2161:socket_connect_finish] 0-glusterfs: connection to 176.58.113.205:24007 failed (Connection refused) [2014-06-13 08:52:28.148236] E [glusterfsd-mgmt.c:1601:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: koraga (No data available) [2014-06-13 08:52:28.148251] I [glusterfsd-mgmt.c:1607:mgmt_rpc_notify] 0-glusterfsd-mgmt: Exhausted all volfile servers [2014-06-13 08:52:28.148477] W [glusterfsd.c:1095:cleanup_and_exit] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_transport_notify+0x27) [0x7fe077f8e0f7] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_clnt_notify+0x1a4) [0x7fe077f91cc4] (-->/usr/sbin/glusterfs(+0xcada) [0x7fe078655ada]))) 0-: received signum (1), shutting down [2014-06-13 08:52:28.148513] I [fuse-bridge.c:5444:fini] 0-fuse: Unmounting '/var/www/shared/private/uploads'. My fstab contains: proc /proc proc defaults 0 0 /dev/xvda / ext4 noatime,errors=remount-ro 0 1 /dev/xvdb none swap sw 0 0 /dev/xvdc /var/lib/glusterfs/brick01 ext4 defaults 1 2 koraga:/private_uploads /var/www/shared/private/uploads glusterfs defaults,_netdev 0 0 Any ideas what's going on and/or how to fix it?

  Read the article

• Connecting Windows XP to Windows 7 directly using cable

  - by TPR

  These are the problems I am encountering. XP can access Windows 7, not the other way around (which is fine, because I don't need it the other way currently) File transfer is too slow like 0.031 MB/s even though netperf and netCPS list around 8-9 MB/s. I disabled firewall on both computers. Both are same workgroup. I left homegroup on Windows 7. Windows 7 sees the connection as unidentified network. 10.1.1.2 (XP) and 10.1.1.1 (Windows 7) Subnet mask 255.255.255.0 Default gateway and DNS are empty for both of them. Both computer are connected to internet using wireless (using home network), and both of them are connected to each other using wire! If anybody has any pointers, do let me know. I have no problem doing such setup with both computers being Windows 7. This time one of them is XP though, and that seems to be the problem.

  Read the article

• Lock screen keeps making sound when screen is off

  - by row1

  I have my laptop (Asus UL20FT) on external power and hooked up to an external monitor. I keep the laptop lid closed and am using the 'second screen only' option. If you leave it on the lock screen for a short period of time the screen powers off. While the screen is off it keeps repeating a "duuuh duh duh" sound (sounds just like the device plugged in sound). The monitor is connected via HDMI and I have Microsoft and Logitech wireless USB dongles plugged in. How can I prevent this sound loop?

  Read the article

• Thin virtual host

  - by Adam Ryczkowski

  My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

  Read the article

• Using Xbox 360 controller with Mac OS X (specifically turning it off)

  - by Bob King

  So I've been using this driver for a few months with the Xbox 360 Wireless Controller For Windows with my Mac Mini. Here's an article about the driver on Gizmodo. The driver works really well for actually using the controller, but there doesn't seem to be a way to power off the controller without pulling the batteries. Does anyone know of a replacement driver that includes power-off capabilities, or know of some other undocumented way to turn the controller off? Note: I've been having problems getting to the site, but it could be our corporate filtering.

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  Hello, I recently did a full upgrade of windows 7 on my thinkpad, everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen just before the Windows logo appears, disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this wont boot with battery plugged in is greatly appreciated - i need to take this battery out on the road/trains etc.... Cheers Matt

  Read the article

• Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

  - by Anthony

  Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• WEP key not working on laptop running Ubuntu

  - by stupid-idiot

  I can't connect to my router via wifi from my laptop (running Ubuntu) even if I'm 100% sure the WEP key I punch in is correct. It works via LAN though. I'm also not able to ping localhost 127.0.0.1. I had some problems setting up the radio on my network card but I think that that works since it finds some wireless networks. (Although it's much much faster than Windows it's useless since I can't download any libraries for development.) What could be wrong with my setup?

  Read the article

• Windows Bluescreen - atikmpag.sys

  - by Mochan

  Information Name: atikmpag.sys bluescreen (BSOD or BlueScreen of Death) Error code: 0x00000116 Appears when: Playing games, watching videos Can be reproduced: Yes Cause: Graphics Card is the main assumption System Specifications Before we begin - I will inform you of my specifications. OS: Windows 7 x64 Home Edition Model: Dell Inspiron 15R Special Edition (aka Inspiron 7520) (Add 2GB of RAM to the model linked) Hard Drive: 1TB CPU: Intel Quad-Core i7 Sandy Bridge (I think) Processor at 2.10GHz (I think it can be clocked to 3GHz?) RAM: 6GB (I think 1 x 4GB and 1 x 2GB) Display: 15.6" HD (1366x768) Graphics: AMD Radeon HD 7500M 2GB Details So now that you know some basics about my computer, I'll get to the problem. Being an Ubuntu user I hardly use Windows, but occasionally I do. Like to run Skyrim and other games incompatible with Linux and WINE. The new Sims 3 Seasons patch is also now not supported. When playing these two games and other ones, theoretically. I have also heard others saying that while watching HD movies and video series it also happens. While watching the bluescreen as it happens, I see it is the 'atikmpag.sys' error. I have not installed much and nothing significant. I think I have downloaded Skyrim, Firefox and The Sims 3. I haven't done much more... since Ubuntu is definitely the best in comparison! (No hate, just a joke :P). I can reproduce it easily (just by running a game for less than a minute). It is always there each time, but it's never at a specific time or anything. So far I have found that it may be caused by lack of power to the graphics card, or it may be damaged or fried. Since I've had the computer for a mere 4 months (and have had other problems with it also). I have contacted Dell but they are useless beyond belief. Anyone with any information, solutions or details are encouraged to share your knowledge, as it would be immensely appreciated.

  Read the article

• Can OpenVPN invoke DHCP Client?

  - by Ency

  I have got working VPN connection through openvpn, but I would like to use also my DHCP server and not openvpn's push feature. Currently everything works fine, but I have to manually start dhcp client, eg. dhclient tap0 and I get IP and other important stuff from my DHCP, is there any directive which start DHCP Client when connection is established? There is my client's config: remote there.is.server.com float dev tap tls-client #pull port 1194 proto tcp-client persist-tun dev tap0 #ifconfig 192.168.69.201 255.255.255.0 #route-up "dhclient tap0" #dhcp-renew ifconfig 0.0.0.0 255.255.255.0 ifconfig-noexec ifconfig-nowarn ca /etc/openvpn/ca.crt cert /etc/openvpn/encyNtb_openvpn_client.crt key /etc/openvpn/encyNtb_openvpn_client.key dh /etc/openvpn/dh-openvpn.dh ping 10 ping-restart 120 comp-lzo verb 5 log-append /var/log/openvpn.log Here comes server's config: mode server tls-server dev tap0 local servers.ip.here port 1194 proto tcp-server server-bridge # Allow comunication between clients client-to-client # Allowing duplicate users per one certificate duplicate-cn # CA Certificate, VPN Server Certificate, key, DH and Revocation list ca /etc/ssl/CA/certs/ca.crt cert /etc/ssl/CA/certs/openvpn_server.crt key /etc/ssl/CA/private/openvpn_server.key dh /etc/ssl/CA/dh/dh-openvpn.dh crl-verify /etc/ssl/CA/crl.pem # When no response is recieved within 120seconds, client is disconected keepalive 10 60 persist-tun persist-key user openvpn group openvpn # Log and Connected clients file log-append /var/log/openvpn verb 3 status /var/run/openvpn/vpn.status 10 # Compression comp-lzo #Push data to client push "route-gateway 192.168.69.1" push "redirect-gateway def1"

  Read the article

• Virtual machines interconnection inside Proxmox 2.1 Cluster

  - by Anton

  We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

  Read the article

• What's constitute an entry on the IPTables and how to find out which client it is originated from

  - by cbd

  I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

  Read the article

• Reputable web based ssh client? [closed]

  - by Doug T.

  I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

  Read the article

• How do you change your Airport or Ethernet MAC address in Mac OS X 10.6?

  - by Dave Gallagher

  I have a MacBook Pro and would like to set a custom MAC address for either my Airport WiFi card, or Ethernet port. In older versions of Mac OS X, you could do it like this: $ sudo ifconfig en0 ether 00:11:22:33:44:55 // Ethernet $ sudo ifconfig en1 lladdr AA:BB:CC:DD:EE:FF // Airport For it to work on Airport, you'd have to power it on (e.g. $ sudo ifconfig en1 up), ensure it's not connected to any wireless network, and execute the command. I'm aware such a change won't propagate across reboots. Unfortunately, this doesn't work on Mac OS X 10.6.6 anymore. Apple appears to have removed the functionality (the command fails silently). Does anyone have any idea how to do it? Thanks for any help you can offer! :)

  Read the article

• Windows 7 USB power lose after a few seconds / minutes

  - by Stefan Dunn

  My friend's computer has a problem where the USB ports causes problems with the power of some devices connected to the computer. The USB mouse has no problems, however the Wireless Adapter looses power after around 20 seconds of use and USB Flash Drives cause the computer to either freeze, lose power (and become unresponsive) or become disconnected (still shown in Device Manager, but not in My Computer) when trying to transfer any type of file to / from the computer. I have a suspicion it's the Motherboard but could it also be a Software problem? Tried a new case, RAM, CPU and GFX Card which had no effect. The problem occurs on both the Front USB and Back (Motherboard) USB Ports. UPDATE: Tried the USB devices with an Ubuntu Live CD and they work fine, could this mean it's a problem with Windows (x64)?

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM [closed]

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >