Search Results

Search found 6229 results on 250 pages for 'stuck pixel'.

Page 176/250 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• CD and DVD burning very slow with LG DVD Burner

  - by Om Nom Nom

  I have an HP m7560in Desktop which came with an LG DVD burner. As far back as I can remember, it has been having problems in burning discs. It used to take about one and a half hour to burn 4 GB of data on a blank DVD-R. I am using Nero and ImgBurn and I usually select 8x speed for burning. I used to run XP earlier and now I run Windows 7 on it, but I face the problem on both. I have already checked that DMA mode is selected in the IDE controllers' properties. On XP, uninstalling the IDE controllers and DVD drive from the Device Manager, rebooting and letting it install the drivers again fixed the problem for a while, but after a couple reboots, the problem used to come back. On Windows 7, even doing that is not fixing the problem. In fact, in Windows 7, the burning process doesn't even begin. Imgburn gets stuck on the first stage (of writing Lead-In), and it never progresses until I turn off / reset the computer. I checked the disc info after this happened, and the disc still shows empty and ready to be burned on, so it's obvious that it didn't even touch the disc. I have already had the drive replaced once by HP, but it didn't fix the problem. Do you guys have any suggestions? (Note that Windows Updates doesn't give any newer driver for the controllers, or any other components for that matter).

  Read the article

• Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

  - by npmj

  I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

  Read the article

• Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

  - by npmj

  I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• Remote Desktop Connection to the same screen as on the monitor?

  - by Ricket

  I'm running Windows Home Server on, well, my server. It's in my entertainment center, hooked to my TV, and I use it to listen to music and watch movies. Right now I have a keyboard and mouse stuck beside my TV so that I'm able to load a movie. It would be nice, though, to be able to remotely control the screen. Remote Desktop Connection seems to open its own session in the background, separate from the session shown on the monitor. This doesn't do any good because things started via remote desktop must be closed or changed via remote desktop, and I can't start a movie with remote desktop and then see it from the screen. Is there a way to get Remote Desktop Connection to connect to the visible screen? I am currently using UltraVNC; it was doing the job, but it has its quirks. For instance, the problem just now that prompted me to ask this question; upon trying to connect, UltraVNC informs me that "Server closed connection - The server running as application". This is just one of several problems I've had with it, and I want something that is as reliable and low-maintenance as the built-in Remote Desktop Connection. (and free) If the answer to the above is no, I'm welcome to recommendations for a different remote desktop system to try.

  Read the article

• How can a CentOS 6 guest running in VirtualBox be configured as a LAMP server that can be accessed from the Windows host?

  - by jtt89

  I was able to conect Centos6 on Virtual Box to Windows (I can ping in both directions) with Host-only Adapter (for connection between the two) and NAT Adapter (to enable Linux on VB to connect to the Internet). I want to set up httpd, mysql and vsftpd servers and in the end easily connect to httpd from Windows based browser and ftp server with a Windows based client as well. I would also want to have access through SSH. I have a general idea of the steps that are involved, but there is also a configuration that I am not sure about at this point. Lets say I follow these steps: yum install httpd yum install php php-pear php-mysql yum install mysql-server mysql_secure_installation yum install vsftpd yum install mod_ssl Technically I have everything installed, but what would be the next steps that I need to take (from the networking point of view, so to speak) to get it all working)? I know I need to configure, at least Apache, and ftp server, but I am not sure how is it gonna work; like where am I gonna be uloading the sites (I know this can vary), how am I gonna know what address to use in a browser if I wanna go to a website x, y, z on that installation etc. This sounds like I need to do some kind of DNS setup and I am kind of stuck at this point. If somebody could give me a general outline of what are the things that need to be done that would be great (I was looking at a lot of websites and I know about etc/sysconfig/network, httpd.config - not too much about it on Apache's site, hostname, hostname -f etc; but it is kind of hard to piece it all together at this point). I am gonna be looking at the books also, but they not always reflect the setup that I have too (VirtualBox). Thank you.

  Read the article

• Deploying a Git server in a AWS linux instance

  - by Leroux

  I'm making a git server on my linux instance in AWS. I tried doing it using these instructions but in the end I always get stuck with a "Permission denied (publickey)" message. So here is my detailed steps, the client is my windows machine running mysysgit and the server is the AWS ubuntu instance : 1) I created user Git with a simple password. 2) Created the ssh directory in ~/.ssh 3) On the client I created ssh keys using ssh-keygen -t rsa -b 1024, they got dropped in my /Users/[Name]/.ssh directory, id_rsa and id_rsa.pub key pair was created. 4) Using notepad I copy pasted the text into newly created files on the server in the ~/.ssh directory of my Git user. ~/.ssh/id_rsa and **~/.ssh/id_rsa.pub** were copied. 5) On the server I made the authorized_hosts file using "cat id_rsa.pub authorized_hosts" (while inside the .ssh directory) 6) Now to test it, on my client machine I did ssh -v git@[ip.address] 7) Result : debug1: Host 'ip.address' is known and matches the RSA host key. debug1: Found key in /c/Users/[Name]/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/[Name]/.ssh/identity debug1: Trying private key: /c/Users/[Name]/.ssh/id_rsa debug1: Offering public key: /c/Users/[Name]/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I would appreciate any insight anyone can give me.

  Read the article

• Drupal install and permissions

  - by Richard

  So I'm really stuck on this issue. An install process is complaining about write permission on settings.php and sites/default/files/. However, I've moved these files temporarily to write/read (chmod 777) and changed the owner/group to "apache" as shown below. -bash-4.1$ ls -hal total 28K drwxrwxrwx. 3 richard richard 4.0K Aug 23 15:03 . drwxr-xr-x. 4 richard richard 4.0K Aug 18 14:20 .. -rwxrwxrwx. 1 apache apache 9.3K Mar 23 16:34 default.settings.php drwxrwxrwx. 2 apache apache 4.0K Aug 23 15:03 files -rwxrwxrwx. 1 apache apache 0 Aug 23 15:03 settings.php However, the install is still complaining about write permissions. I followed steps one and two of the INSTALL.txt but no luck. Update: To further explore the situation, I created sites/default/richard.php with the following code: <?php error_reporting(E_ALL); ini_set('display_errors', '1'); mkdir('files'); print("<hr> User is "); passthru("whoami"); passthru("pwd"); ?> Run from the command line (under user "richard"), no problem. The folder is created everything is a go. Run from the web, I get the following: Warning: mkdir(): Permission denied in /var/www/html/sites/default/richard.php on line 9 User is apache /var/www/html/sites/default Update 2: Safe mode appears to be off... -bash-4.1$ cat /etc/php.ini | grep safe | grep mode | grep -v \; safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH sql.safe_mode = Off

  Read the article

• ESXi 4.0 Guests Locking up

  - by Brendan Sherwin

  I installed ESXi 4.0 on an HP Proliant g5 with a 64bit Xeon processor and took advantage of the free license as I work for a public school. I created two instances of server 2003 from scratch, one to be the DC, DHCP, the other to be a file server and DNS/DHCP backup. I had both guests up and running fine, setup my user accounts, transferred the data, etc etc. Once I joined a client machine to the domain, I would find that both of my Windows guests would lock up. Sometimes it would be for five or so minutes, once it was overnight. The "locked up" state means that as far I could tell, all services were stopped; dhcp no longer handed out IP's, DNS stopped working, I couldn't RDP into the server. The ESXi host, my HP server, was still running fine. VSphere was working, and I could look at the performance of the individual guests.I would try Powering off the hosts from inside VSPhere, and the hosts would start powering off, but get stuck at 95%, and stay that way, sometimes only for 10 minutes, others for hours. Several times I had to restart ESXi from it's console in order to restart my machines. Now, can anyone tell me what is happening, and how I can fix it, or take steps to prevent it? I hired a consultant to come take a look at it, someone who's experience and knowledge I trust, and he told me he had never seen anything like this ever before. He spoke to a friend of his who is VM certified, and he also said he had never heard of this issue. Thanks for your replies, and I'll do my best to respond ASAP. Currently, the server is powered off, and I've reinstituted my nine year old Server 2000 boxes, and I'm considering installing ESXi 3.5. Does anyone know a host created in 4.0 will work in 3.5? I'd really like to avoid having to rebuild those accounts! I know 4.0 works on this server, as I have another server in another school with the same exact hardware running 4.0 fine. Brendan

  Read the article

• Throttle CPU Usage consumed by Process

  - by Brett Powell

  We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

  Read the article

• How to bypass resume from hibernate

  - by Daniel Trebbien

  I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

  Read the article

• Performance of Virtual machines on very low end machines

  - by TheLQ

  I am managing a few cheap servers as my user base isn't large enough to get much more powerful servers. I also don't have the money lying around to invest in a server to prepare for the larger user base. So I'm stuck with the old hardware I have. I am toying with the idea of virtualizing all the current OS's with most likely VMware vSphere Hypervisor (AKA ESXi) Xen (ESXi has too strict of an HCL, and my hardware is too old). Big reasons for doing so: Ability to upgrade and scale hardware rapidly - This is most likely what I'll be doing as I distribute services, get a bigger server, centralize (electricity bills are horrible), distribute, get a bigger server, etc... Manually doing this by reinstalling the entire OS would be a big pain Safety from me - I've made many rookie mistakes, like doing lots of risky work on a vital production server. With a VM I can just backup the state, work on my machine, test, and revert if necessary. No worries, and no OS reinstallation Safety from other factors - As I scale servers might go down, and a backup VM can instantly be started. Various other reasons. However the limiting factor here is hardware. And I mean very depressing hardware. The current server's run off of a Pentium 3 and 4, and have 512 MB and 768 MB RAM respectively (RAM can be upgraded soon however). Is the Virtualization layer small enough to run itself and a Linux OS effectively? Will performance be acceptable (50% CPU overhead for every operation isn't acceptable)? Does it leave enough RAM for the Linux OS? Is this even feasible?

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• Postfix: change sender in queued messages

  - by ring0

  Following a complete re-installation we got a problem with the configuration: the sender address was wrong and some recipients (mail servers) rejected them. So there is a bunch of mails stuck in the Postfix queue. Ideally, a change of the sender address directly in the queued mails, and then flushing the queue would be optimal. I tried this answer that addresses this very problem. But messages don't seem to be easily modifiable in the version I have (2.11.0). For instance there is no /var/spool/mqueue dir, but, instead, /var/spool/postfix/... active bounce corrupt defer deferred dev etc flush hold incoming lib maildrop pid private public saved trace usr and the dir of interest is deferred. I tried to modify a few files there changing the wrong domain with the correct one (and was careful to ensure only those were changed). But then, those mails were moved to corrupt, meaning that a simple text change doesn't seem to work (done with vi). Any other cleaner way to change the sender in queued mails?

  Read the article

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• EEE PC Keyboard malfunctioning - Ctrl key "sticks" after 10 seconds

  - by DWilliams

  I was given a EEE PC belonging to a friend of a friend to fix. The keyboard did not appear to work at all. I spent a while testing out various things, blowing the keyboard out, checking for damage, and so on. Nothing appeared to be physically wrong. At first I noticed that the keyboard appeared to work just fine for 10 seconds (on average, sometimes more sometimes less) after being powered on. It had been restored to the factory default xandros installation with no user set up, so I couldn't get in to mess with things since I couldn't type to make a user. I made an ubuntu live USB to boot it from, and managed to get the boot order changed to boot from USB in the ~10 seconds of working keyboard I had (I don't think I've ever had to rush around BIOS menus that quickly). After I got Ubuntu up on it, I played around a bit more and determined that apparently the ctrl key is stuck down (not literally, but it's on all the time). If I open gedit, pressing the "o" key brings the open dialog, "s" opens the save dialog, and all other behaviour you would expect to see if you were holding down the control key. The only exception that I noticed is the "9" and "0" keys. They function normally. Figuring that out I made a xandros user with a name/password consisting of 9's and 0's. I couldn't find any options in Xandros that could potentially be helpful. I'm not familiar with EEE PCs. Is it safe to assume that the keyboard is simply dead or could there be another problem? I don't want to purchase another keyboard for him if that isn't going to fix the problem. The netbook doesn't show any obvious signs of damage but the owner is a biker and very often has it with him on the road so it's been subjected to a good bit of vibration.

  Read the article

• IIS 7.5 / Windows 7: Error 500.19, error code 0x800700b7

  - by nikhiljoshi

  I have been trying to resolve this issue. I am using Windows 7 and VS2008 +iis7.5. My project is stuck because of this error. The error says: Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. `Detailed Error Information Module IIS Web Core Notification BeginRequest Handler Not yet determined Error Code 0x800700b7 Config Error There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined Config File \\?\C:\inetpub\wwwroot\test23\web.config Requested URL http://localhost:80/test23 Physical Path C:\inetpub\wwwroot\test23 Logon Method Not yet determined Logon User Not yet determined Config Source 15: <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> 16: <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> 17: <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> ` I followed the instructions in this Microsoft solution document, but it didn't help. http://support.microsoft.com/kb/942055

  Read the article

• Random Hard Freeze of Windows 7 (is Kaspersky to be blamed for this?)

  - by Christian Ivicevic

  The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

  Read the article

• I must clear my cmos to be able to boot

  - by Fredou

  I have this Asus p7p55d-e pro for about 8 months(got it last July) and for this last 3-4 days I cannot boot without clearing my CMOS what I have is: Seasonic M12D 750W ASUS P7P55D-E Pro Intel Core i5 760 Quad Core Processor Lynnfield LGA1156 XFX GeForce® 8800 GT Alpha Dog 512MB DDR3 Standard (PV-T88P-YDF4) 2x Corsair XMS3 CMX4GX3M2A1600C7 4GB DDR3 2X2GB DDR3-1600 CL 7-8-7-20 I tried to remove all the unnecessary stuff: HD/dvd/pci card/usb cable/etc I tried with only 1 dimm filled, instead of my 4, each one individually it didn't work I tried changing the battery, here goes a few dollars to nowhere, didn't work if I don't reset the CMOS it sometime stock on RAM led, sometime on BOOT DEVICE led, when this happen, it stuck on CPU speed detection when I boot right after the reset, i MUST click on the F2 option (boot with default bios setting) if i go into the bios and save/restart, i have to reset it again when booted, everything is rock solid stable, tried memtest, cpu stress, etc, etc. without issue what should be my next step? trying a new psu? (i need to find one..) doing rma? (i need this mb since it's my only computer...) something else?

  Read the article

• Exim 4 Virtual Domains and Catchall on Debian (Squeeze)

  - by parazuce

  Hello, I've been at it for about 4 hours now. Searching as well as trying different tutorials. Here's my setup: I have 2 domains, both under my own DNS server (MX records setup as well). I have exim4 successfully running, and it is able to send messages from both of those domains. I have tested this using sendmail, and manually setting the "From" attribute. Exim successfully delivers mail to users no matter which domain was specified. I'm fine with that, but I'm having an issue editing virtual domains, and adding custom delivery options (such as a catch all). I've been searching for about 4 hours, and I can't find any up-to-date documentation on how to do this. The old methods would be to add a line such as: domainlist local_domains = @:localhost:dsearch;/etc/exim4/virtual Once that line was added, I made a directory at /etc/exim4/virtual, then created files inside such as example.com which would then contain rules for delivery under that domain. This did not work, however. Searching further, I've found that exim no longer supports dsearch (I guess because they claim it never has?) This is where I'm stuck. I'm on a "split" configuration as well.

  Read the article

• How can I erase the traces of Folder Redirection from the Default Domain Policy

  - by bruor

  I've taken over from an IT outsourcer and have found a struggle now that we're starting a migration to windows 7. Someone decided that they would setup Folder redirection in the Default Domain Policy. I've since configured redirection in another policy at an OU level. No matter what I do, the windows 7 systems pick up the Default Domain Policy folder redirection settings only. I keep getting entries in the event log showing that the previously redirected folders "need to be redirected" with a status of 0x80000004. From what I can tell this just means that it's redirecting them locally. Is there a way I can wipe that section of the GPO clean so it's no longer there? I'm hesitant to try to reset the default domain policy to complete defaults. ***UPDATE 6-26 I found that the following condition occurred and was causing the grief here. I've already implemented the new policies for clients, and for some reason, XP was working great, 7 was refusing to process. The DDP was enforced. Because of this, and the fact that the folder redirection policies were set to redirect back to the local profile upon removal, it was forcing clients to pick up it's "redirect to local" settings. Requirements for to recreate the issue. -Create a new test OU and policy. -Create some folder redirection settings, set them to redirect to local upon removal -Remove settings on that GPO -Refresh your view of the GPO and check the settings. -You'll notice that the settings show "not configured" entries for folder redirection. -Enforce this GPO -Create another sub-OU -Create a GPO linked to this sub-ou and configure some folder redirection settings. -Watch as the enforced GPOs "not configured" setting overrides the policy you just defined. I've had to relink the DDP to all OU's that have "block inheritance" enabled, and disable the "enforced" option on the DDP as a workaround. I'd love to re-enable enforcement of the DDP, but until I can erase the traces of folder redirection settings from the DDP, I think I'm stuck.

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine?

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Splitting HDMI sound to 2 devices under Windows 7

  - by Jeramy

  Okay, this is a strange set-up and is frustrating me. I have an HDMI signal from my PC being split to my audio receiver and my HDTV. I need to split it to both so that I can choose to either play audio from the HDTV or from the surround sound speakers in the room. The problem that I am having is in Windows 7, the output is listed under "Playback Devices" and is auto-populated with the HDTV, which only has the option for stereo sound. If I unplug the HDTV from the splitter it will populate with my receiver information and let me set it to 5.1 surround, but as soon as I plug the HDTV back in it reverts. I tried reversing the order of the HDMI cables in the splitter and this seemed to work for a short while, then Windows must have polled the devices again or something because it reverted. It will work as long as Windows identifies the reciever, thereby unlocking the 5.1 surround option, otherwise I am stuck with stereo, which it assumes is all the HDTV is capable of. Is there a way to manually override this and set my own options? Or any other solutions?

  Read the article

• Global Address List, Multiple All Address Lists in CN=Address Lists Container

  - by Jonathan

  When my colleges (that was way before my time here) updated Exchange 2000 to 2003 a English All Address Lists appeared in addition to the German variant. The English All Address Lists have German titled GAL below it. This has just been a cosmetic problem for the last few years. Now as we are in the process of rolling out Exchange 2010 this causes some issues. Exchange 2010 picked the wrong i.e. English Address Lists Container to use. In ADSI Editor we see CN=All Address Lists,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain and CN=Alle Adresslisten,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain. In the addressBookRoots attribute of CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain both address lists were stored as values. We removed the English variant from addressBookRoots and restarted all (old and new) Exchange servers. User with mailboxes on the Exchange 2003 now only sees the German variant. Exchange 2010 is still stuck with the English/Mixed variant as are Users on Exchange 2010. Our goal would be to have Outlook display the German title of All Address Lists and get rid of the wrong Address Lists Container.

  Read the article

• Pushing updates to live server... FTP isn't cutting it... a better method?

  - by Jenkz

  I'm the lead developer in a team of 2. My partner has only just joined the project and despite using GIT for version control etc, we are still stuck in the dark ages when it comes to code deployment. Currently I make all site updates via FTP (this way I have control / responsibility over everything that goes live), using Filezilla. I've done this for years, but we now have some large PHP classes (300KB), and a lot of traffic. So in short, every time I upload a key class "general" for example, the site goes down until the file finishes uploading. This is only 5/6 seconds at a time, but this is increasingly unacceptable. I realise I can upload the file under a different name and then rename both files... but really there must be a better way? I've heard about rsyncing code across from another server, but I don't see how this prevents switching to the new file whilst uploading. We only have one server (for DB and Apache) but also use some cloud servers (for openx as an example).

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >