Search Results

Search found 6229 results on 250 pages for 'stuck pixel'.

Page 181/250 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• OpenVPN Server - CPU is pegged out

  - by ericl42

  Hello, I am configuring OpenVPN to act as a SSL tunnel for a remote location. I have OpenVPN1 at our current location acting as a server then OpenVPN2 at the other location that is acting as a client but is also acting as a DHCP server to machines behind it so they are basically connected to the local LAN. Everything is set up fine and I can talk from location A to location B with no problems like everyone is local. I am however having some performance issues. OpenVPN1 CPU is pegged to 100% the entire time I am copying or doing any type of activity through the tunnel. I expect some CPU usage going up but nothing like this. It's really killing my performance. OpenVPN1 is running in ESX right now with 2 gig RAM and 4 procs with unlimited bursting capacity. I am using AES-192 encryption with a 1024 key. Any idea how I can get my CPU down on OpenVPN1 and my download/upload speeds higher between the tunnel? Thanks. edit: Turning down the logging helped boost the throughput a little bit, but I am still fairly shy of where I believe I should be. Also I am still maxed out on the CPU. Does anyone have any ideas? I am really stuck on this. Thanks.

  Read the article

• Cannot log into Windows XP Embedded after changing computer name

  - by bignis

  Hi everyone, I purchased a tablet pc running Windows XP Embedded. The tablet was used in a medical clinic on a domain. For illustrative purposes, say the computer name was "COMPLEXCOMPUTERNAME". There was an administrator account, so I changed the password on account "COMPLEXCOMPUTERNAME\Administrator" to a blank password. I logged out and logged in successfully with the blank administrator password when the log-in dialog said "Log in to COMPLEXCOMPUTERNAME (this computer)". Next I renamed the computer from COMPLEXCOMPUTERNAME to SIMPLECOMPUTERNAME, which required a reboot. I did so, and I can't log in anymore. The log in screen still just says "Log in to COMPLEXCOMPUTERNAME (this computer)", but the account "COMPLEXCOMPUTERNAME\Administrator" no longer works. I suspect that this is because the computer has been renamed to SIMPLECOMPUTERNAME and it can no longer find the account. The "Log in to" dropdown can't be typed in, so I can't change the computer name Windows is trying to log into. I fear that I'm stuck. Is there a way I can get Windows to log into the computer name that I chose? Thanks! -Mike

  Read the article

• Not able to run firefox in a head-less Ubuntu server 9.10

  - by Julio J.

  I need to run Firefox in my server in order to execute some Selenium tests from Hudson. I would love no to have to install a complete gui. So I installed Xvfb in order to fake the Gui (I understand it this way correct me if my assumptions are wrong). After some time trying to make it work, I'm stuck with the next situation: $ sudo Xvfb -ac :99 & [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) $ firefox [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! [config/dbus] couldn't register object path (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) Xlib: extension "RANDR" missing on display ":99.0". GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally without any error message) I'm runnig firefox without installing it from the repositories. And I'm getting a socket timeout when I try to run the selenium tests, so I guess the problem is in Firefox and Xvfb. I have installed already the nex package: i gconf-defaults-service - GNOME configuration database system (system defaults service) That in some forums suggest to be a fix, that in my case doesn't work. Any explanation about the problem and ways of solving it without installing a full gui, will be very helpful.

  Read the article

• Windows 7 fails to connect to the internet a few minutes after startup

  - by SageTheGreat

  Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

  Read the article

• NGINX Configuration Error using Codex Example: Is This a Typo in Codex?

  - by jw60660

  I installed NGINX using this tutorial: C3M Digital NGINX Tuturial but after reading this article on security issues with "cut and paste" configuration tutorials: Neal Poole's article regarding security and NGINX configuration I decided to follow Poole's suggestion to use the configuration suggested in the WordPress codex: Codex on NGINX Configuration I used the Codex configuration for a multisite installation using W3 Total Cache. When attempting to start NGINX I get an error saying that the /etc/nginx/nginx.conf test failed. The error message was: "Restarting nginx: nginx: [emerg] unknown directive "//" in /etc/nginx/sites-enabled/teambrazil.com:18" When I looked at my site specific configuration at that path I noticed the rewrite rule in the server block was: rewrite ^ $scheme://teambrazil.conf$request_uri redirect; That line in the Codex example was: rewrite ^ $scheme://mysite.conf$request_uri redirect; That looked like a mistake to me, and I changed my line to: rewrite ^ $scheme://teambrazil.com$request_uri redirect; I then attempted to restart NGINX but got the same error message. My question is: is that a mistake, and is there anything more I have to do aside from restarting NGINX after making this change. As suggested by both tutorials I set up the directories: /etc/nginx/sites-enabled and /etc/nginx/sites-available and created the appropriate symbolic links using: touch /etc/nginx/sites-available/teambrazil.com ln -s /etc/nginx/sites-available/teambrazil.com /etc/nginx/sites-enabled/teambrazil.com Is there something else I need to consider after making this correction? Or was it not an error in the first place? I'm pretty stuck here. BTW, I am using Debian squeeze as an OS on Amerinoc's VPS. I'm just getting familiar with VPS administration and am pretty much a noob. Thanks very much, would appreciate any input.

  Read the article

• IPtables - Accept Arbitrary Packets

  - by Asad Moeen

  I've achieved a lot on blocking attacks on GameServers but I'm stuck on something. I've blocked major requests of game-server which it aceepts in the form "\xff\xff\xff\xff" which can be followed by the actual queries like get status or get info to make something like "\xff\xff\xff\xff getstatus " but I see other queries if sent to the game-server will cause it to reply with a "disconnect" packet with the same rate as input so if the input rate is high then the high output of "disconnect" might give lag to the server. Hence I want to block all queries except the ones actual clients use which I suppose are in the form "\xff\xff\xff\xff" or .... so, I tried using this rule : -A INPUT -p udp -m udp -m u32 ! --u32 0x1c=0xffffffff -j ACCEPT -A INPUT -p udp -m udp -m recent --set --name Total --rsource -A INPUT -p udp -m udp -m recent --update --seconds 1 --hitcount 20 --name Total --rsource -j DROP Now where the rule does accept the clients but it only blocks requests in the form "\xff\xff\xff\xff getstatus " ( by which GameServer replies with status ) and not just "getstatus " ( by which GameServer replies with disconnect packet ). So I suppose the accept rule is accepting the simple "string" as well. I actually want it to also block the non-(\xff) queries. So how do I modify the rule?

  Read the article

• Provisioning DELL servers using only linux tools

  - by Krist van Besien

  We have taken delivery of a bunch off Dell Poweredge Rack servers. Unfortunately when ordering it was neglegted to ask for dhcp to be enabled in the built in iDRAC controlers... So they are all stuck on the same IP address. Which means that I'll have to go to each of them individually and configure a new IP in the console... In the future I want to avoid that. Now Dell proposes to deliver the next batch with auto discovery enabled. As I understand this means that when the machine wakes up for the first time the iDRAC will request a DHCP address. The DHCP server then supposedly also provides a "provisioning" server, that provides it with a username and password, and a configuration to be applied. This would allow us to for example configure things like RAID automatically. However, I can't seem to find a way to set up such a provisioning server that does not involve setting up a windows machine. I want to use Linux tools exclusively. Is there a way to do this? I want to just rack servers, switch them on, and then do everything remotely. And that using only linux tools?

  Read the article

• Running a service with a user from a different domain not working

  - by EWood

  I've been stuck on this for a while, not sure what permission I'm missing. I've got domain A and domain B, A trusts B, but B does not trust A. I'm trying to run a service in domain A with a user account from domain B and I keep getting Access is Denied. I'm using the FQDN after the username and the password is correct. The user account from domain B is a local administrator on the domain A server, the user account has the logon locally, and as a service permissions. Must. Get. This. Working. Update: I found something interesting in the logs I must have missed. This ought to get me pointed in the right direction. Event ID: 40961 - LsaSrv : The Security System could not establish a secured connection with the server ldap/{server fqdn/fqdn@fqdn} No authentication protocol was available. I've found a few fixes for 40961 but nothing has worked so far. I've verified reverse lookup zones. nslookup resolves the correct dc properly. still workin' at it. Upadte: In response to Evan; I ran " runas /env /user:ftp_user@fqdn "notepad" " then entered the users password and notepad came up. It seems to work successfully. This issue is now resolved. The problem is visible in the screenshot. Windows tries to use the UPN for the user account if you dig your user out of AD with the Browse button. This fails every time even with the right user and password. Simply using the SAM format (Domain\User) works. So simple, yet so annoying. Can't believe I missed this. Thanks to everyone who helped.

  Read the article

• Save and restore multiple layers within a Photoshop action that flattens

  - by SuitCase

  I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

  Read the article

• FTP FileWatcher

  - by Meiscooldude

  So, I am in this little predicament where I am stuck watching a few ftp folders to see if they have new files added to them. If they do, it needs to throw an event with the file name. Thereby telling something else to download that file. This is a pretty simple object to make, I was just curious if anyone knew how expensive this operation would be? I plan on using the command NLIST because I don't need file size information, and there will be no sub-directories in the folder. Each file in the folder will have exactly 25 characters in its name. There could be anywhere from 10 to 'maybe' a couple thousand (max around 2000) files per folder (usually on the lower end, 100-300, but currently growing). The files are anywhere from 250kb to a very VERY unlikely 10mb (usually within the 250kb to 4mb range). There possibly could be up to a few hundred folders (in which case I could change the watch frequency depending on number of folders), but currently there are only a few (6-10ish). There also would be multiple logins for the ftp server, different logins would have access to different folders. I am not asking for an implementation, just if anyone has some first or second hand knowledge about FTP, how could this affect my network. I am not opposed to putting in file retention times or change the frequency in which I check for new files.

  Read the article

• Data Store/Volume disconnecting. How to resume copy of VMDK?

  - by Serge

  I'm having an issue with my ESXi 4.1 hosts losing the datastore with FC SAN after a power outage. All 3 hosts disconnect so it's definitely a SAN issue. I've tried to resolve the issue on the SAN side with the SAN software support and Adaptec hardware support. No luck there. So I'm stuck with a SAN that will randomly disconnect the volume. I need to get the virtual machines (VMDK files) from the datastore. The problem is I can only get 5-20% before the data store disconnects. I have backups that are slightly older that I can use to replicate the VMDK differences to. What has not worked so far: Powering up the VMs, will boot up for 5-15 minutes then freeze vCenter migrate or clone of VM, will fail after similar period of time vCenter copy/paste of VMDK. Was able to get one 30GB VMDK and no luck after that. vMware Data Recovery. Fails at low %, can't resume, so next backup starts from begining. Veeam Backup & Recovery. Same as above, no resume function. If I can just find a backup solution that will resume from the failed spot that would solve my issue. Anyone have any ideas that I could try? EDIT 1 The SAN is Open-E DSS 6 running on a Supermicro 24 drive enclosure with 4 port Qlogic FC. Adaptec 52445 RAID card.

  Read the article

• Error related to pkg-config when installing frei0r as part of another package

  - by Anentropic

  I am trying to build https://github.com/mltframework/shotcut on OS X Lion (using their script in scripts/build_shotcut.sh) and after numerous hurdles I'm stuck on this error: ./configure: line 16062: syntax error near unexpected token `OPENCV,' ./configure: line 16062: `PKG_CHECK_MODULES(OPENCV, opencv >= 1.0.0, HAVE_OPENCV=true, true)' ERROR: Unable to configure frei0r From what I already googled this means that the PKG_CHECK_MODULES macro hasn't been defined, which probably means there's something wrong with my pkg-config, which I installed via Homebrew. Sounds like the pkg.m4 file isn't found. When I brew install pkg-config I get the following warning: Warning: m4 macros were installed to "share/aclocal". Homebrew does not append "/usr/local/share/aclocal" to "/usr/share/aclocal/dirlist". If an autoconf script you use requires these m4 macros, you'll need to add this path manually. Well I've appended that line to the dirlist file and it doesn't fix the problem above. Can anyone suggest a way forward here? I have briefly tried building my own pkg-config from source but (bizarrely) when I tried to ./configure I got the following error: checking for pkg-config... no ./configure: line 13540: --exists: command not found configure: error: pkg-config and glib-2.0 not found, please set GLIB_CFLAGS and GLIB_LIBS to the correct values if building pkg-config needs pkg-config it seems like a weird catch 22 situation... I think this is probably an unnecessary sidetrack anyway.

  Read the article

• Solid State Drive Occasionally Freezes For A Minute While OS Is "Beach Balling"

  - by Boris_yo

  Almost a month ago I bought Intel 330 128GB solid state drive, migrated my data with Intel branded limited-feature Acronis from old HDD to new SSD, optimized with Intel Toolbox and started using it. Occassionally I get close to 1 minute freezes while seeing operating system "beach balls" and animations still work, I can interact and click on something but nothing responds, nothing loads. Recently a couple of such freezes occurred in shorter amount of time in a row. I have noticed that if I stop interacting with laptop, the freeze lasts less time than if I was interacting with laptop. But the bigger problem is when freeze just does not end and computer keeps being stuck unlil it is more than half hour and I run out of patience to keep waiting and feeling I need to restart the system because I am not getting anywhere. Such freeze happened while laptop was cold booting into Windows 7. This is when freeze hang occurred and I had to restart, only later to be greeted with Windows recovery screen stating something about faiure of boot sector and asking to insert Windows repair CD. But after I restarted, Windows booted successfully and all was well. I have filmed video of freeze hang occurring in cold boot which you can see here (on video page look below for description): http://www.youtube.com/watch?v=8b7MQlcDTUs As I have mentioned in the beginning, the SSD is less than a month old but here is S.M.A.R.T statistics just in case (TRIM is enabled btw according to CrystalDiskInfo): I want to emphasize that this SSD is the only drive I have, yet it is working in RAID mode (it was enabled initially in BIOS by previous laptop's owner) on Intel Rapid Storage drivers. I am contemplating about switching to AHCI mode but want to be sure this won't cause data loss. Additionally, the stock firmware is the only firmware available currently, yet Intel does not respond to my posts in their community board. If anyone here has this SSD model or generally has experience with SSD drives, I would love to know your thoughts.

  Read the article

• Arch Linux: How to handle patches which only you will use?

  - by user12932

  I'm using freerdp together with xmonad and it has been giving me a lot of trouble. The super key (or "windows key") is my mod key in xmonad and it has been interfering with my freerdp usage rather annoyingly. Whenever I switched workspaces (or did anything else in xmonad involving the super key), windows (controlled by the freerdp instance in focus) registered a keypress as well. This event combined with the loss of focus got the super key stuck in windows indefinitely: the press of the keys d and r would first show my desktop, then open the run dialog (as if I was pressing the windows key constantly). I've tried several versions of freerdp, but all exhibited this annoying behavior. So I resorted to patching freerdp myself to just ignore the left super key on my keyboard. I love free software for a lot of reasons (especially the ability to alter things like this myself), however I still find it annoying to patch and rebuild freerdp on all version (and dependency) changes. How do you deal with situations like this? Is there even a "right way" to resolve this issue?

  Read the article

• PhpMyAdmin import/export - strange character encoding issues.

  - by John Hunt

  Hello, I'm migrating a site to a new host, and there are a couple of databases on there. There's no SSH access so I'm stuck with phpmyadmin. The issue is that certain characters (namely just whitespace) seems to being corrupt on the new site (same html, and apache doesn't seem to be messing with any encodings - you can see the strange characters have changed when I use less on my linux machine after downloading a table dump from both servers.) The issue isn't as bad if I import into the new database as utf-8 - whitespace characters only have one funny A type symbol instead of two. I've been trying various combinations of character encoding etc to no avail. Exporting from: phpMyAdmin 2.6.2 MySQL 4.1.20 MySQL connection collation: utf8_general_ci MySQL charset: UTF-8 Unicode (utf8) Collation on tables and their fields is: latin1_swedish_ci Importing to: phpMyAdmin - 2.11.9.2 MySQL client version: 5.0.45 MySQL charset: UTF-8 Unicode (utf8) MySQL connection collation: utf8_general_ci The import sql has this kind of thing in it: ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=192 ; I get the impression this is actually a bug or something with mysqldump as nothing seems to work.. does anyone have any insight into this? Cheers, John.

  Read the article

• How can I make an encrypted email message into a .p7m file?

  - by Blacklight Shining

  This is a bit complicated, so I'll explain what I'm really trying to do here: I have a Debian server, and I want to automatically email myself certain logs every week. I'm going to use cron and a bash script to copy the logs into a tarball shortly after midnight every Monday. A bash script on my home computer will then download the tarball from the server, along with a file to be used as the body of the email, and call an AppleScript to make a new email message. This is where I'm stuck—I can't find a way to encrypt and sign the email using AppleScript and Apple's mail client. I've noticed that if I put a delay in before sending the message, Mail will automatically set it to be encrypted and signed (as it normally does when I compose a message myself). However, there's no way to be sure of this when the script runs—if something goes wrong there, the script will just blindly send the email unencrypted. My solution there would be to somehow manually create a .p7m file with the tarball and message and attach it to the email the AppleScript creates. Then, when I receive it, Mail will treat it just like any other encrypted message with an attachment (right?) If there's a better way to do this, please let me know. ^^ (Ideally, everything would be done from the server, but there doesn't seem to be a way to send mail automatically without storing a password in plaintext.) (The server is running Debian squeeze; my home computer is a Mac running OS X Lion.)

  Read the article

• Rename Active Directory domain following Windows 2000 -> 2008 migration.

  - by ewwhite

  I'm working with a site that needs an internal DNS domain rename. It currently has a DNS name of domain.abc.com and NT name of ABC. I'm trying to get to a DNS name of abctrading.com and NT name of ABCTRADING. Split DNS would be used. The site originally ran from a single Windows 2000 domain controller hosting AD, file, print, DHCP and DNS services. There was no Exchange system in the environment. The 50 client PCs are all Windows XP with a handful of users using roaming profiles. All users are in a single OU and there are no group policy/GPOs. I'm a Linux engineer, but have been trying to guide another group of consultants to reach a more suitable setup. With the help of this group, we were able to move the single Windows 2000 system to a set of Windows 2008 R2 servers separated into domain controller and file/print systems (virtualized). We are also trying to add an Exchange 2010 system to this mix. The Windows 2000 server was demoted and is no longer in the picture. This is the tricky part, as client wants the domain renamed and the consultants aren't quite sure how to get through it without another 32-40 hours of testing/implementation. THey say that there's considerable risk to do the rename without a completely isolated test environment. However, this rename has to be done before installing Exchange. So we're stuck at this point. I'd like to know what's involved in renaming the domain at this point. We're on Windows Server 2008. The AD is healthy now. Coming from a Linux background, it seems as though there should be a reasonable path to this. Also, since the original domain appears to be a child/subdomain, would that be a problem here. I'd appreciate any guidance.

  Read the article

• fedora, dhcpd fails to start

  - by soxs060389

  History: I got a tiny shiny plugserver which I want to plug to my ADSL router (or however you want to call it) on one end (eth0), and the other end (eth1) I want to run a dhcp server for my LAN. ATM I am stuck with getting LAN to work. OS is fedora 12. I configured my /etc/dhcp/dhcpd.conf like this: # # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "unknown.org"; option domain-name-servers 192.168.44.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.44.255; default-lease-time 86400; max-lease-time 172800; subnet 192.168.44.0 netmask 255.255.255.0 { host fedorabigbox { hardware ethernet 00:19:66:8E:61:74; fixed-address 192.168.44.21; } #host mobile #{ # hardware ethernet ***; # fixed-address 192.168.44.22; #} range 192.168.44.100 192.168.44.110; option routers 192.168.44.1; } # this is just dummy, as read many howtos, some suggesting to add a subnet blah netmask blah for each interface subnet 192.168.33.0 netmask 255.255.255.0 { range 192.168.33.100 192.168.33.110; option routers 192.168.33.1; } But the server fails to start when trying to start it via /etc/init.d/dhcpd start In general it would be nice if someone can point me to a in detail explanation of how network works, I am pretty new to this stuff. More concrete question: How to point the subnets to eth1 and the other to eth0, how can this be achieved? Does someone see any errors or flaws? Syntax should be correct, allready checked that with the dhcpd syntax check. Thanks for any help

  Read the article

• Dell Dimension 8400 Startup error

  - by Michael

  Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

  Read the article

• ISA 2000 and COD MW2 Steam

  - by twlichty

  OK, so maybe not the "proper use" of network resources, but we enjoy the odd COD game during lunch hours. When we played COD4, we had a dedicated server setup at the back of the server room. With MW2, we need to be able to connect to steam to be able to play multi-player. I've found this support article here: https://support.steampowered.com/kb%5Farticle.php?ref=8571-GLVN-8711 Which outlines all the ports I need to open. I went through and created the following rules in ISA 2000 (I'm stuck with 2000 for now). Protocol Definition: Steam Primary connection: Port 27000, UDP, Send Receive Secondary Connection: Port range 27001-27030 Send Receive Protocol Definition: Steam TCP In Primary connection: 27014, TCP, Inbound Secondary Connection: Port range: 27015-27050, Inbound Protocol Definition: Steam 4380 Primary connection: 4380, UDP, Send Receive When I start steam on my local workstation (I did add an exception to the Vista Firewall to allow steam), the steam client sits on "Updating Steam" for 5 minutes then errors out with: You must connect to the internet first. Any ideas? I assume I missed something. Thanks for your help.

  Read the article

• Acer Aspire One -- strange battery problem, charges only up to ~90%

  - by houbysoft

  I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• How do I keep the keyword.url setting in firefox to default when you restart the browser without del

  - by user34801

  I am on the latest version of Firefox (not beta or anything like that) and currently my keyword.url is stuck on search.google.com (which I don't remember setting even though the about:config says it's a user setting. Can someone tell me how to set it back to default and keep it at default when I reset my browser? I do not want to delete prefs.js as I do not want to go thru setting up all the extension settings I have just to have my location bar search google (if this is the only way then I'll stick with searching from the search bar instead). I've checked all my extensions that may effect the location bar but could not find anything that says it would change the default search engine for this. I've also tried to open the prefs.js in wordpad or notepad but it just ends up freezing when trying to edit it at all (yes the browser is closed at the time). I also deleted the prefs-1.js (along with 2 others) that were older (after trying to rename those to prefs.js and see if this corrects it. It might have but had such old extension settings I went back to my latest prefs.js with this one issue instead of the issue of setting back up a ton of extensions. I can give any other info if needed, someone please help me fix this issue if possible.

  Read the article

• IIS 6 ASP.NET default handler-mappings and virtual directories

  - by Mark Lauter

  I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

  Read the article

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >