Search Results

Search found 8842 results on 354 pages for 'plug and play'.

Page 177/354 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• Windows 7 Audio tracks messed up

  - by Crash893

  I'm not an audio guy so it might not be the most articulate description of the problem I'm having but it seems like ever since I went to Windows 7 some video (netflix and some youtube) the background track (music sound effects etc) plays appropriately but the foreground track (i.e. the actors and/or narrator) barely comes in at all Right now I have just a simple set of PC speakers and some times a pair of headphones that plug into the PC speakers (no fancy 5.1) I've looked at every setting I can think of but I can't find anything that could be causing this Ive uninstalled the driver and reinstalled and I still get the same results so I think its a software issue any ideas?

  Read the article

• Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

  - by Filip Ekberg

  I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

  Read the article

• Linux wget, how to display progress percentage after session has reload?

  - by skyrail

  I am running debian Squeeze in console mode on a plug computer. I control it opening an SSH session from a Windows machine, on the same local network. I started downloading a large file using wget. What I get is a console progress bar showing the percentage of data downloaded, file size, and download rate. When I close the session, debian is still running and downloading. Fine. But When I close and reopen a session, how can see which amount of data was downloaded, using a linux command ? thanks.

  Read the article

• VGA cable causing resolution issue

  - by LatishS

  I recently bought a new VGA cable. When connected, Windows 7 detects my monitor as a generic plug and play monitor. The resolution goes bad with the screen blurred. This problem disappears when I connect my original VGA cable. Also Windows 7 detects my LG monitor correctly in this case. I am pretty sure it is something to do with the VGA cable but have no idea what could be the possible issue. Any pointers would be very much appreciated.

  Read the article

• Thinking Sphinx index rebuild error on windows xp: searchd is already running

  - by Voldy

  I have Sphinx installed on windows xp system. A I use Thinking Sphinx plug-in within my rails application. I can't rebuild index with Thinking Sphinx rake task after application server starting up even if I stop it: Stopped search daemon (pid 4492). ... bla bla bla ... total 3 reads, 0.000 sec, 1.3 kb/call avg, 0.0 msec/call avg total 9 writes, 0.000 sec, 1.2 kb/call avg, 0.0 msec/call avg WARNING: could not open pipe (GetLastError()=2) rake aborted! searchd is already running. If I reload system, I can rebuild index. What do you think about? p.s: Does this question suited for serverfault.com?

  Read the article

• Seeking glass lcd montiors with LED backlight

  - by dlamblin

  The only LCD monitors with glass fronts and LED back-lighting I can find are the ones by Apple. And they only sell a 24" one at 2.4x the price of any other 24" monitor at 1920x1200, and a 30" one, which honestly I can't put on my desk. Oh, and the 24" one uses a mini-display port plug only. So I'd be out of luck until there's display side adapter available. I am generally looking for a 16:10 or 4:3 rather than 16:9 monitor. It would be awesome if someone could find another, cheaper, monitor that isn't fronted by a plastic film, but rather with glass. It would be double awesome if said monitor was also 120hz so that I can use nVidia's 3D goggles. Update: One month and 16 days later I seem to not be the only one that can't find another glass based computer lcd monitor. LED backlighting is available though.

  Read the article

• Fan twitches and LEDs blink when computer is plugged in

  - by Zifre

  I just finished assembling a desktop for the first time. The specs are: Gigabyte GA-H55M-S2H motherboard Core i3 530 CPU 4 GB DDR3 RAM 1 TB SATA hard drive 500 Watt PSU As soon as I plug in the computer, the "phase LED" starts blinking orange and the system fan LED blinks while the fan "twitches". This continues until about three seconds after I unplug the computer. This worries me a lot because I haven't even turned the computer on and it continues even after there is no power. I did make sure the PSU is on the proper power setting. What is causing this and how can I fix it? Is the motherboard dead?

  Read the article

• How can I stop Ubuntu from playing audio from 2 interfaces at the same time?

  - by Solignis

  Hi there, I just loaded Ubuntu 10.10 Maverick on my home machine. The machine is running a Core2Duo E6750 on an MSI motherboard with an Nvidia GTX260-OC Graphics card. The problem I am having as stated in the title is for some reason Ubuntu is playing audio through my headphone coming out from the computer and it is also playing the audio at the exact same time through the HDMI connection coming out of the graphics card, it has a plug to allow this. What is going on, I have never seen this before. Most importantly of all can it be fixed so that I can sepertate the 2 interfaces, the one is a standard PC audio IO and the HDMI one is connected through the mobo's internal SPDIF. More information can be provided if required.

  Read the article

• Are there any 5.1 surround audio switches on the market?

  - by thepurplepixel

  (Somewhat related to this question) I have a set of Logitech 5.1 surround speakers, which use 3 stereo 3.5mm TRS connectors (minijacks) to transfer the audio (the typical green/black/orange audio outputs). I have a Griffin Firewave hooked up to my MacBook Pro, and my desktop has a Realtek ALC889 audio chipset. I have looked for a way to, essentially, switch the speaker inputs between my Firewave and my desktop without having to disconnect the cables from one, route them around my desk, and plug them into the other. I'd love to have something like an old Belkin DB-25/LPT switch, but for these audio cables. Of course, purchasing one and soldering my own cables on the connection terminals is always an option, but, is there a reasonably priced 5.1 audio switch (or 3x stereo) on the market that will accomplish the simple task of switching audio outputs between two computers into a set of 5.1 speakers? Thanks in advance!

  Read the article

• Why could cause the keypad backlights to spontaneously illuminate on my Palm Treo?

  - by LeopardSkinPillBoxHat

  I have a Palm Treo 680 smart phone. I have noticed recently that when the phone is turned off, the keypad backlights will spontaneously illuminate. This is particularly annoying because it drains the battery life of the Treo -- when I woke up this morning, the battery was completely flat and I had to plug it in to wake it up again. I suspect that this has something to do with the Energy Dimmer application (I have version 2.16 installed). I have disabled this application today to see if it makes the problem go away. Has anyone else had this problem, and do you have any solutions?

  Read the article

• Enable automatic driver install in Windows XP

  - by Peter

  When Windows detects new hardware (be it graphic card or USB Peripheral) it automatically installs driver and if it can't find a driver it shows "Found New hardware wizard" that allows you to manually select a driver. My problem is that this "Found New hardware wizard" shows up every time when I plug a new device and I have to click Next Next Next.. until it finishes installation. It's just like in Windows 98 ;) I want to fix it to the way it's supposed to be. It's got nothing to do with "Windows Update" and "Driver Signing" settings in "System properties - Hardware" tab, those are on default settings. Here is the same problem I have, but those replies ale completely useless

  Read the article

• Is this a common/bug on this PPPoE setting for Cisco ASA 5505?

  - by DCAlliances

  We have to change the way the firewall setup due to we've changed the internet provider. The way we setup we have ADSL modem and we have to do a full bridge mode and the firewall configuration has to change from Static IP to Use PPPoE option on Outside interface with PPPoE username and password, CHAP authentication, WAN IP and WAN subnet mask. [See the attachment] It's been working ok with the use of PPPoE option however the issue is that if we un-plug the power cable of the firewall. This "Outside" interface turned to blank - NO WAN IP, PPPoE username and password. So basically, we have to retype this information again. Is this common or a bug? Any ideas? Thanks

  Read the article

• PowerConnect 2848 , vlan configuration with AP

  - by Francesco

  I need to configure two vlan on an AP connected with a Dell PowerConnect 2848. The first one is up and running (let's say vlan x) , the second one is a completely different network (vlan y) , provided by a Gateway-DHCP wich i have no access, directely Patched (via patch panel) at a secondo AP device. So i cannot just plug this Gateway device on my switch without tagging traffic before, for DHCP collion . I have to solve this problem. I was thinking about tagging the traffic at the port wich I will connect the gateway device with vlan y and then set as trunk (vlanx+y) the AP port. In this way I hope to limit the vlan y traffic ONLY for the ports I selected avoiding the spread of unwanted dhcp calls. But all other ports are Unassigned , so I am not sure they won't forward dhcp (vlan y) traffic. I cannot change the Unassigned state for the vlan x ports cause vlanx is native.

  Read the article

• Belkin Flip KVM keyboard skip problems

  - by Craig

  I have just bought a Belkin Flip 2 port KVM. Functionally it is almost there except I have a keyboard sticking problem. So if I type the word 'Hello' it will often (about 25% of the time) output 'Hellooooooooooooooooooooo'. If I plug the keyboard directly into the USB on the computer I don't have this problem, only when plugged into the KVM. I feel like it is a USB speed problem. Followup It appears I have the same problem with the mouse, it will jump from one side of the screen to the other as I move it. The mouse is annoying but half as much as the keyboard.

  Read the article

• missing bootmanager after win7 installation from external hdd

  - by Alex

  today i tried to install win7 from an external hdd to my system. i tried this tut http://www.pcworld.com/article/165159/install_windows_7_from_an_external_hard_drive.html and everything went fine till i pluged off the external hdd. after i pluged it off and tried to restart the system i get a missing boot manager error. if i plug the external hdd in again it's all working fine again. i've searched for the last 2h and didn't find a good answer. did any of you have one ? regards Alex ps: i already tried any forms of reperation and the system is installed on the correct hdd.

  Read the article

• Headset - No audio devices are installed

  - by Meowbits

  I've been having problems with my headset and I just cannot seem to figure it how to fix it. When I plug the microphone and headphone jacks into the computer I can hear sound fine. However the microphone does not get recognized. If I go into Sound Recording, it showed the microphone and it said that it was working but nothing was getting picked up. I uninstalled the audio devices and let windows reinstall them but now when I go into Sound Recording, it states "No audio devices are installed" Before I uninstalled the audio driver I made sure to try every combination of audio devices I could - none worked... If you know what I should try next, please let me know. I am getting frustrated. Running windows 7 64 bit

  Read the article

• Is there a Unix/Linux platform equivalent of Telligent Community (formerly Community Server)?

  - by Scott A. Lawrence

  Telligent Community combines blogs, wikis, forums, and file-sharing capabilities into a single product with single sign-on, using all Microsoft technologies. Is there an equivalent offering that runs on Unix/Linux? Or would I have to pick and choose individual product offerings and figure out another option for single sign-on across them? Are there plug-ins for something like WordPress or MovableType that might add the necessary functionality? A friend of mine is looking to add a "members-only" area to her company's website, and since they're hosted on Dreamhost (and can't afford StackExchange pricing yet), I'm trying to find other options for them.

  Read the article

• Laptop battery: is voltage really important to respect?

  - by Marc-Andre R.

  I got an Acer Aspire 5100 and I just bought a new battery (after the stock battery just died yesterday). But I saw something after buying and I'm wondering whether it's really important or not. My stock battery was a 6-cell 4000mah 11.1v and the new battery is an 8-cell 4800mah 14.8v . I know that 8-cell and 4800mah is okay, but what about the 14.8v instead of 11.1v? The battery description says it's compatible with my laptop model (AS5100, model BL51), but the voltage difference makes me wonder. Will the laptop only take what it needs? Or will it be getting 14.8v straight in the brain? I know that my wall plug claims to output 19v, so logically I'm thinking a higher voltage battery shouldn't be a problem. Am I correct in thinking this? Thanks in advance for your answers!

  Read the article

• Windows boots to Black Screen of Death — Is my HDD faulty?

  - by Flynn1179

  My wife's PC suddenly stopped booting up properly. It gets as far as the Windows 'loading' screen with the bar scrolling away, but that's as far as it gets for some time, then suddenly flashes up a BSoD barely long enough to see, then the display cuts out. We've got identical PCs, and after swapping components, I established that my PC suffers the same problem if I swap in the HDD. Even if I plug hers in as a second HDD on my machine, it still does the same thing, even though it's booting from mine. I can't even boot her machine from CD or DVD either, so I couldn't even use a recovery disc. I did manage to partially boot my PC into safe mode with the other HDD attached, and it got as far as loading 'crcdisk.sys' and froze. Anybody know what could be wrong with it, or at least how I can get the data off the disk? I'm assuming there's still data on the disk, given that it at least shows me the vista 'loading' screen.

  Read the article

• I found two usb sticks on the ground. Now what?

  - by Stefano Borini

  As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

  Read the article

• USB Keyboard not working under windows 7 x64?

  - by Comboo

  I have two usb keyboards, one no-name cheapo thing and an old logitech. When i plug them in to my computer they pop up in device manager as "Unknown device" respective "USB-receiver". Both of them fail to install any drivers, neighter automatically or through windows update. Both keyboards work perfectly on another computer i have with vista 32bit. Can this be one of those cases where a device does not work in 64bit version of windows? I doubt it though since I've never had that problem before with any device and i thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing usb-port etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over usb? There is nothing written on it.

  Read the article

• Computer can't boot

  - by zETO

  I have a 1 year old PC and the last weeks, when I press the ON button the PC doesn't power on ( Like I didn't press the ON button ). I have to plug and unplug a few times the power cord in order to make it work. At the start this happened once in 10 boots. Now it happens much more frequently to the point that when I press the power on button it never even opens if I don't do the cord switch thingy. Very rarely also, the PC shut downs for no reason and no warning, even when idle. The important fact to note here is, the green light on the motherboard is always on, even when the PC doesn't power on. What should I do? Is it a Power Supply failure or a motherboard? My power supply is a high end corsair model, AX850 and my motherboard a high end ASUS.

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83. I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• Macbook Pro Multiple Monitor Problem

  - by thinksocrates

  I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >