Search Results

Search found 8842 results on 354 pages for 'plug and play'.

Page 181/354 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• ATI video cards - unable to use entire monitor (1080p)

  - by Walter White

  Hi all, I have a Dell s2409w, 24" 1080p monitor. With nVidia, I would plug-in the monitor and voila, it automatically knew it was 1080p (1920x1080). I have both a Windows laptop and Ubuntu laptop. Neither is capable of using the fullscreen even though the monitor reports the input is 1080p. I am connecting the monitors via HDMI, is there a 'special' setting I am missing to make this work? Otherwise, I like the performance of my ATI video cards, the drivers seem to be stable and reliable. Thanks, Walter

  Read the article

• My Macbook Pro doesn't give any reaction when pressing the power button

  - by Juri

  An hour ago I closed the display my Macbook Pro. it goes into sleep mode. After dinner I returned, opened the display and wanted to continue with my work, but I recognized it was switched off completely. I tried to press the power button and received nothing. I also noticed that the green light on the power supply plug which is plugged into my Macbook is off. Same thing with a power supply from the Mac of a friend of mine. What could I try? Some suggestions? What could be the problem here?? I already tried using the battery to start, no success, also taking the battery out completely, no success. Even if I press the small button for showing the current battery charge, none of the leds starts. It's like the Mac is completely dead.

  Read the article

• Video from vhs via USB capture device on Linux

  - by Juanlu001

  I want to transfer video from a VHS tape to my computer with Arch Linux, using a USB capture device that comes with Roxio Easy VHS to DVD, which I recently bought. I tried to plug in the device, and it was properly recognized. From /var/log/messages.log, em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 (card=9) saa7115 3-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x50 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video1 em28xx #0: V4L2 VBI device registered as vbi0 Is there any software that enables me to capture video coming from this device? I don't mind if it is console or GUI based.

  Read the article

• Why is my HDD not showing up?

  - by Mike

  I'm on Windows 7, got a new 2 TiB NON-external hard disk. When I plug it in it doesn't show up on the Disk Management list in the Computer Management window (that you get by right-clicking My Computer and selecting "Manage"). At first I thought it was broken, but I could see it using a friend's computer. I've run a full disk scan using the official tool from Western Digital, no problems. I've formatted it and partitioned it at another friends place, I've even encrypted the disk fully without any problems, then mounted it and placed a text file on it with the word "hello" inside and saved the file. When I boot my own computer the disk shows up in BIOS. So the disk is not broken. I've tried changing what SATA slot on the motherboard I stick it in. Makes no difference. After all this: Why won't my Windows 7 discover the disk???

  Read the article

• Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

  - by jhaukur

  Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

  Read the article

• Changing Firefox Tab Cycle Order

  - by Mark Roddy

  When you use Ctrl-Tab in Firefox, you move through tabs in the order that they are listed in the tab bar at the top of the window. I would prefer that when I use Ctrl-Tab the next tab that I switch to is the most resently used tab. That way if I have two tabs I am using frequently I can easily switch between them without having to manually modify the ordering of the tabs via drag/drop. This is a feature that Opera has which I find to be very productive. Does anyone know of a setting or plug-in that will accomplish this for me?

  Read the article

• IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

  - by jayson

  Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

  Read the article

• Is there an online storage service that works with Windows 7 Backup and Restore? [closed]

  - by user57813

  I love Windows 7 Backup and Restore.. However, I kind of find it inconvenient to use external hard drive, plug it in, take it out, put it away safely etc.. Is there an online storage service to which Windows Backup can save the backup files to? Can I make Windows Backup store the backed up data to an online storage service? I do not want to manually upload the backup files. I want it to save directly to the cloud. Doesn't matter if the service costs me some $$$. I am using Windows 7 Ultimate 32-bit edition.

  Read the article

• USB flash drive unreadable after a few minutes on Windows 8

  - by B Sharp

  I recently got a new computer with Windows 8. I a have a number of large backup files I am moving from my old PC to my new one. I was able to successfully copy the files to a couple 16 GB flash drives. When I try to copy the files to my new computer, the process starts just fine but after copying about 4 GB of files, the copy stops. If I look at the drive in explorer, the drive is there, but I just get a busy cursor that stays indefinitely if I click it. If I unplug the flash drive and plug it back in, everything is fine again... for a couple minutes. I've tried copying from both flash drives with the same result. I've also tested this on the USB 2.0 and 3.0 ports on my motherboard with the same result (the drives are USB 2.0) It's also puzzling that this is happening since I previously used one of the same flash drives to install Windows 8 on this computer in the first place without any difficulty.

  Read the article

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• Can storage-spaces drives be moved to a replacement server when there is a failure

  - by Joe C

  I have tried to search here and Google, but cannot find a case explaining this. Storage spaces is similar to software raid. If the server fails due to motherboard or some other issue, can the drives that comprise that storage spaces config be moved to another win2k12 server without restoring from backup? This can be done in linux software raid. If so, does the storage space config have to be re-created prior to the move, or do the drives hold the config so they are essentially plug and play? Thanks.

  Read the article

• How can I perform a controlled shutdown of a virtualbox guest using VBoxManage?

  - by Bryan

  I'm currently testing Ubuntu 10.04, and have install the VirtualBox software. I have also installed Ubuntu 10.04 as a VirtualBox guest running on the host system. I've installed the VirtualBox Utils into the guest OS, as follows: sudo apt-get install virtualbox-ose-guest-utils What I want to be able to do is to initiate a controlled shutdown of the guest, from the host system using the VBoxManage command. I first tried this command: VBoxManage controlvm guest poweroff which worked, but didn't initiate a controlled shutdown, it effectively pulls the plug on the guest. I've since found that this command should do the trick: VBoxManage controlvm guest acpipowerbutton but this doesn't appear to do anything. Can anyone tell me what I'm doing wrong? p.s. I don't want to use SSH & Certificates to do this, as I'm also going to be running Windows guests, and I want the solution to work for all guests.

  Read the article

• Targus USB-to-RS232 not working with Linux?

  - by Ethan Leroy

  I have the Targus PA088 USB to RS232 converter, but it seems that it does not work with linux. Its RX and TX lights are flashing, but I can't see the data in minicom/picocom. When using it with Windows and hterm, everything's fine. Any idea what could be the problem? Additional info: When I plug in the adapter, I can see the following messages in /var/log/messages.log Nov 25 01:47:31 localhost kernel: [ 831.787066] usb 2-1.1: new full speed USB device number 5 using ehci_hcd Nov 25 01:47:32 localhost kernel: [ 832.554810] mct_u232 2-1.1:1.0: MCT U232 converter detected Nov 25 01:47:32 localhost kernel: [ 832.555002] usb 2-1.1: MCT U232 converter now attached to ttyUSB0 Nov 25 01:47:32 localhost mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1" Nov 25 01:47:32 localhost mtp-probe: bus: 2, device: 5 was not an MTP device

  Read the article

• How to get my Apple Keyboard to work on Ubuntu?

  - by misbehavens

  I'm trying to use a USB keyboard with my Ubuntu laptop, but when I plug in the keyboard, it is not even detected. I am trying to use the Apple Slim Aluminum Keyboard. It would also be nice if the USB ports on the keyboard could work, but I can get by without that luxury. How can I get my Apple Slim Aluminum Keyboard to work with Ubuntu? Update: After upgrading to a newer version of Ubuntu (9.04 Jaunty), the keyboard was detected and types just fine. There are a few quirks like the clear button being used as the numlock key but that seems to be well documented on other sites.

  Read the article

• NIC light is turned off after boot on Redhat 4.6 server

  - by hoffmandirt

  I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

  Read the article

• Would a Socket Connection Outperform an Intarvaled Database Sweep and Requests?

  - by Jascha

  I'm building a small chat application to add to an existing framework. There will only be 20-50 users MAX at any one time. I was wondering if I could get away with updating a cache file containing (semi) live chat data for whichever users happen to be chatting just by performing timed queries and regular AJAX refreshes for new data as opposed to learning how to open and maintain a socket connection. I'm sure there are existing chat plug-ins out there. But I just had a hell of a time installing one and I could see building the whole damn thing taking just as much time as plugging one in. Am I off to a bad start? Thanks in advance -J (p.s. this is a semi closed network behind a php login so security isn't a great concern)

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• How to vertically split widescreen into two virtual workspaces on ubuntu/gnome?

  - by David

  My new laptop has a big 16:9 screen, and I'm finding it hard to fully utilize it during the 95% of the time that I'm not watching HD movies on it. I'd like to set it up as a kind of virtual dual screen by splitting the physical screen into two workspaces. I know I could arrange my windows manually, but I'd like to be able to maximize a window and have it only consume half the monitor, and have its pop up dialogs centered on its half-screen, that sort of thing. Is there some kind of plug in available to do this? Thanks in advance for any pointers.

  Read the article

• Touchpad stops working when plugging in new laptop PSU

  - by drahcir

  I recently bought a psu for my Compaq 6710b and when I plug it in to the laptop the touchpad seems to go stop working, especially when the laptop is charging. I checkout this site and it suggests that the problem might be static electricity building up due to poor earthing.I tried replacing the cable that leads from the psu to the wall socket with the one I had of my old psu but to no avail. I even tried to see if I put the psu farther away might reduce to interference but also resulted in failure. Any ideas on how I could solve this problem?

  Read the article

• Windows Home Server backup recovery missing driver for USB Device

  - by Pat James

  I'm doing a backup recovery of a Windows 7 PC from the backup on Windows Home Server. I've done this before and am accustomed to the prompt to load drivers for devices such as the NIC from a USB flash drive, which I have all loaded up with the drivers from the special folder in the WHS backup repository for this PC. My problem on this PC is that one of the drivers the recovery CD complains is missing is "USB Device", and it fails to find the drivers when I click the button to scan for and install drivers. So it seems it can't access the USB flash drive to load the other drivers. Any suggestions? I think my next step is to pull a DVD drive from another system and plug it in with a CD burned with the device drivers.

  Read the article

• Bare bones backup / restore for single Win 2003 server

  - by s.mihai

  I have a single server, Win 2003 Server and would like to setup a system to be able to perform a bare bones restore if needed. (just plug in a cd or smth and get everything back). Ideally the backup could be performed while the is powered so that i don't have to support downtime during this, and in order to restore i would reboot and use some sort of liveCD Any ideas on this, software and all... ? (backup will be done to a remote FTP server with plenty of bandwidth).

  Read the article

• Can't initialize drive in Windows 7

  - by Abe

  I have a 2.5" laptop harddrive that I plugged into my laptop through a SATA to USB cable. It's powered by an adapter to a normal wall-plug. I want to use it as an external harddrive. It wouldn't initialize (Device is not ready), so as suggested in some instructions I found I uninstalled the drivers, unplugged it and plugged it back in. That worked, and I initialized the drive and formatted it. However I unplugged it after that and a few days later the same strategy does not work and I can't figure out how to use the drive. I can't initialize it and it doesn't show up in my computer.

  Read the article

• Digital audio does not work on MacBook Pro

  - by mathk

  I have a MacBook Pro (8,2). Using a TOSLINK cable I have no digital output. Oddly enough, sometime I can hear a glitch when I plug in the cable or when I give it a gentle wiggle. My guess is that the output is not correctly detecting that I have a digital link. So is there a way to force digital audio output on a MacBook Pro? Some say that in the Audio MIDI Setup there is an option but I can't find it. I am running OS X 10.7.5.

  Read the article

• Tripple-Head Setup: Raedon 5770

  - by Aren B

  I currently own a Sapphire Raedon HD 5770 1GB w/ DDR5 (Link) I've got two LCDs set up in this configuration: +---------++------+ | || | | 1 || 2 | +---------++------+ Im looking into buying a new TV/Monitor, a Samsung T240HD (h**p://www.memoryexpress.com/Products/PID-MX22473(ME).aspx) and I'd like to set up a tripple monitor setup like this (new monitor being #3) +---------++------++---------+ | || || | | 3 || 2 || 1 | +---------++------++---------+ Monitor 1: DVI Monitor 2: DVI Monitor 3: HDMI PS3 - Monitor 3: HDMI2 Is this possible with my current video card? Can I plug in 2x DVI + 1x HDMI and get a third display? Or am I going to have to buy a slew of Display Port Adapters? I know older video cards you could only have 2 active displays, but I heard that barrier was defeated with the Display-Port series video cards.

  Read the article

• Windows XP runs New Hardware Wizard for usb keyboard and mouse, can't find drivers

  - by Randy Orrison

  I have a PC that up until a couple days ago was working fine. I moved it from one site to another and now when I plug in the USB mouse or keyboard (the same ones that were working previously) XP brings up the New Hardware Wizard. Going through it, the correct keyboard and mouse are identified, but XP can't find the drivers. I've tried manually searching for the driver (using the Have Disk option) - the first file it's looking for is in the c:\i386 directory, but that installs a generic HID mouse device; the system then runs the hardware wizard for a new "unknown" device. The system was SP2, I have installed SP3 in hopes that would help, and I've also downloaded and installed the mouse drivers from Dell's site (there are no specific drivers for the keyboard), with no change. Before I completely reinstall XP, is there anything else I should try?

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >