Search Results

Search found 5457 results on 219 pages for 'necessary'.

Page 180/219 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• How can I connect DLNA devices through NAT?

  - by Bob

  I have a Windows 7 PC running Serviio as a DLNA server. I have a Samsung I9100G running Skifta as a DLNA renderer (client). My network topology: At the moment, I can connect and watch my videos fine if the phone is on router #2. The server is on a wired network with #2. Router #1 is 192.168.1.1, router #2 is 192.168.2.1 (192.168.1.2) and router #3 is 192.168.3.1 (192.168.1.3). In other words, each router has its own subnet, using NAT - their "modem" port is connected with a "LAN" port on the modem/router 1. What I want to do is be able to connect to the DLNA server if the renderer is connected to router #1/#3 - #1 is on the WAN side of #2, while #3 is even further separated. I'll settle for just #1 working, though. Normally, I would just forward the appropriate ports, and everything would work fine. However, (apparently) DLNA uses UPnP, which I am unfamiliar with. I tried enabling UPnP on router #2, but that did not seem not change anything. It's a Belkin F5D7230-4 6000 - there's reported issues with UPnP on F5D7230-4 7000. UPnP is already enabled on router #1 - a Billion BiPAC 7700N. I've also tried the built in DLNA renderer/server/controller on my phone, Samsung AllShare. It can see the server on router #2 and browse files, but has issues playing or downloading them. It also can't see the server on the other two networks. I'm currently using Skifta/s "local" mode. "Remote" mode requires an account, which I don't really want to create if not necessary. Is it possible too do what I'm trying to do? If no, are there workarounds? If yes, how do I do it? Is my server the issue? The renderer (client)? The router(s)? My method? I can change just about anything except the routers.

  Read the article

• Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

  - by h4xnoodle

  I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

  Read the article

• Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

  - by Ben Campbell

  Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

  Read the article

• Splitting an internet connection between multiple separate subnetworks

  - by pythonian4000

  Problem I have an internet connection that I want to split between four separate networks. My requirements are: I need to be able to monitor the amount of bandwidth and data being used by each network, and notify or control as necessary. The four networks should only be able to connect to the internet, not each other. My parents need to be able to operate it, so it needs a simple, preferably Windows-based GUI. Progress so far Server I have a mini-ITX server with six Gigabit ethernet ports - one for the ethernet internet connection, one for each of the four networks, and one for remote access to the server for administration. Bandwidth control I spent a long time researching solutions here. The majority of the control systems/software I found could control bandwidth usage via QOS, but could not monitor or control the amount of data being used. Eventually I found the SoftPerfect Bandwidth Manager, which has everything I need in terms of monitoring and control - per-interface quota management, usage statistics, a web interface for checking usage, and email notifications when quotas are exceeded. It is also Windows-based and has a simple GUI. Internet sharing This is where I am having issues. I am currently using Windows XP Pro SP2 for the server (yes, I know this is far from ideal, but it's the only spare Windows OS I currently have). I can't use the built-in Internet Connection Sharing for several reasons: The upstream internet router has an IP of 192.168.0.1 which ICS clashes with, and I cannot change the router settings. ICS can only share an internet connection with a single interface, but I have four. I have tried bridging the four network cards, but then the Bandwidth Manager cannot see the four individual interfaces - it only sees the bridge. I have tried setting up Dual DHCP DNS server (and am having issues getting DHCP offers to be received by clients), but that would still require gateway software of some sort, which I have been unable to find. My current attempt is to use OpenVPN, with a server for the internet NIC and a separate client for each of the four networks. My thought is that I could bridge the OpenVPN TAP devices to each NIC, meaning that the Bandwidth Manager would control traffic from the bridge instead of the interface. I have not made much progress here though - I've never used OpenVPN before. Questions Is there a Windows software package that does everything I need? (Unlikely, I know) Is there a Windows software package that will share internet between multiple NICs without bridging? Are either of my about attempts feasible? Would it help to have a newer/server version of Windows? Is there a non-Windows alternative that is easy to use?

  Read the article

• Is dual-booting an OS more or less secure than running a virtual machine?

  - by Mark

  I run two operating systems on two separate disk partitions on the same physical machine (a modern MacBook Pro). In order to isolate them from each other, I've taken the following steps: Configured /etc/fstab with ro,noauto (read-only, no auto-mount) Fully encrypted each partition with a separate encryption key (committed to memory) Let's assume that a virus infects my first partition unbeknownst to me. I log out of the first partition (which encrypts the volume), and then turn off the machine to clear the RAM. I then un-encrypt and boot into the second partition. Can I be reasonably confident that the virus has not / cannot infect both partitions, or am I playing with fire here? I realize that MBPs don't ship with a TPM, so a boot-loader infection going unnoticed is still a theoretical possibility. However, this risk seems about equal to the risk of the VMWare/VirtualBox Hypervisor being exploited when running a guest OS, especially since the MBP line uses UEFI instead of BIOS. This leads to my question: is the dual-partitioning approach outlined above more or less secure than using a Virtual Machine for isolation of services? Would that change if my computer had a TPM installed? Background: Note that I am of course taking all the usual additional precautions, such as checking for OS software updates daily, not logging in as an Admin user unless absolutely necessary, running real-time antivirus programs on both partitions, running a host-based firewall, monitoring outgoing network connections, etc. My question is really a public check to see if I'm overlooking anything here and try to figure out if my dual-boot scheme actually is more secure than the Virtual Machine route. Most importantly, I'm just looking to learn more about security issues. EDIT #1: As pointed out in the comments, the scenario is a bit on the paranoid side for my particular use-case. But think about people who may be in corporate or government settings and are considering using a Virtual Machine to run services or applications that are considered "high risk". Are they better off using a VM or a dual-boot scenario as I outlined? An answer that effectively weighs any pros/cons to that trade-off is what I'm really looking for in an answer to this post. EDIT #2: This question was partially fueled by debate about whether a Virtual Machine actually protects a host OS at all. Personally, I think it does, but consider this quote from Theo de Raadt on the OpenBSD mailing list: x86 virtualization is about basically placing another nearly full kernel, full of new bugs, on top of a nasty x86 architecture which barely has correct page protection. Then running your operating system on the other side of this brand new pile of shit. You are absolutely deluded, if not stupid, if you think that a worldwide collection of software engineers who can't write operating systems or applications without security holes, can then turn around and suddenly write virtualization layers without security holes. -http://kerneltrap.org/OpenBSD/Virtualization_Security By quoting Theo's argument, I'm not endorsing it. I'm simply pointing out that there are multiple perspectives here, so I'm trying to find out more about the issue.

  Read the article

• Custom initrd init script: how to create /dev/initctl

  - by Posco Grubb

  I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

  Read the article

• Permissions problems with Apache / SVN

  - by Fred Wuerges

  I am installed a SVN server (v1.6) on a VPS contracted with CentOS 5, Apache 2.2 with WHM panel. I installed and configured all necessary modules and am able to create and access repositories via my web browser normally. The problem: I can not commit or import anything, always return permission errors: First error: Can not open file '/var/www/svn/test/db/txn-current-lock': Permission denied After fix the previous error: Can't open '/var/www/svn/test/db/tempfile.tmp': Permission denied And other... (and happends many others) Can't open file '/var/www/svn/test/db/txn-protorevs/0-1m.rev': Permission denied I've read and executed permissions on numerous tutorials regarding this errors, all without success. I've defined the owner as apache or nobody and different permissions for folders and files. I'm using TortoiseSVN to connect to the server. Some information that may find useful: I'm trying to perform commit through an external HTTP connection, like: svn commit http://example.com/svn/test SELinux is disabled. sestatus returns SELinux status: disabled Running the command to see the active processes of Apache, some processes are left with user/group "nobody". I tried changing the settings of Apache to not run with that user/group, but all my websites stopped working, returning this error: Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache process list: root@vps [/var/www]# ps aux | egrep '(apache|httpd)' root 19904 0.0 4.4 133972 35056 ? Ss 16:58 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20401 0.0 3.5 133972 27772 ? S 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 20409 0.0 3.4 133972 27112 ? S 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20410 0.0 3.8 190040 30412 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20412 0.0 3.9 190344 30944 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20414 0.0 4.4 190160 35364 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20416 0.0 4.0 190980 32108 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20418 0.3 5.3 263028 42328 ? Sl 17:01 0:12 /usr/local/apache/bin/httpd -k start -DSSL root 32409 0.0 0.1 7212 816 pts/0 R+ 17:54 0:00 egrep (apache|httpd) SVN folder permission var/www/: drwxrwxr-x 3 apache apache 4096 Dec 11 16:41 svn/ Repository permission var/www/svn/: drwxrwxr-x 6 apache apache 4096 Dec 11 16:41 test/ Internal folders of repository var/www/svn/test: drwxrwxr-x 2 apache apache 4096 Dec 11 16:41 conf/ drwxrwxr-x 6 apache apache 4096 Dec 11 16:41 db/ -rwxrwxr-x 1 apache apache 2 Dec 11 16:41 format* drwxrwxr-x 2 apache apache 4096 Dec 11 16:41 hooks/ drwxrwxr-x 2 apache apache 4096 Dec 11 16:41 locks/ -rwxrwxr-x 1 apache apache 229 Dec 11 16:41 README.txt*

  Read the article

• Safer RAID5 rebuilds using partially failed disks?

  - by arcticmac

  There have been lots of articles posted recently about how RAID5 is dangerous because of long resilver times, and in particular because of increasing chances of encountering a URE during the resilver. Obviously this is a significant concern. However, it seems that in many cases of interest (as long as you're keeping some kind of eye on your disks), when it comes time to rebuild the array, the disk that I'm replacing is still mostly readable. If you try to explain this predicament to the average layperson, they are typically very confused as to why you have two almost completely functional disks but can't produce one working array. It seems to me that there ought to be some way to take advantage of this to make rebuilds safer, as long as I'm willing to have the RAID5 be read-only for a couple of days while it rebuilds. Conceptually, what I have in mind looks something like this: When a disk fails, immediately take the RAID5 offline or mount it read-only Attach a new disk (either in a spare bay, or externally via eSATA) and begin rebuilding it to replace the failed one. If known, perhaps start with the stripes in which the failure occurred, to minimize the chances of losing those if another disk fails. In the event that a second disk experiences a URE or other failure during the rebuild, try to source that data from the disk that is being replaced. Presumably if this happens, more rebuilding would be necessary. When complete, shut down the server, swap the replacement drive into the original bay if desired, and bring the array back up. Obviously such a process would not be appropriate for applications where uptime is critical or data loss cannot be tolerated, but it seems to me that this could help considerably to improve the reliability of RAID5. I assume that there's not a good way to implement a recovery like this at present, given that I haven't seen any indication of tools that are designed to do this, and that it seems like it would be rather obtuse to work out manually. Are there also technical issues with it that I haven't thought of (I'm still fairly new to RAID stuff)? Any thoughts on how hard something like this would be to implement (e.g. in linux md raid)?

  Read the article

• HOSTS ignored when disconnected [closed]

  - by Synetech

  Problem I’m seeing a strange and extremely frustrating problem. Any system that is not connect to the Internet (Windows 7 shows the no Internet access icon because it cannot constantly ping Microsoft’s servers) cannot even access locally hosted servers. Hypothesis The problem appears to be that the HOSTS file is not being used to resolve DNS entries when there are no active NICs. Tests / Reproduction You can reproduce it as so: Disconnect a system from the Internet (make sure all wired and wireless connections are disconnected). If necessary, add an entry to the HOSTS file (e.g., 127.0.0.1 foobar or 127.0.0.1 foobar.com) Open a command-prompt Type ping foobar or ping foobar.com Observations The screenshots below show a clear and demonstrative example. In the first snap, a laptop is connected to a router wirelessly. The HOSTS file has only three entries and they resolve just fine. In the second snap, the wireless radio is turned off, so the entries in the HOSTS file are ignored. Moreover, notice that pinging localhost still works even without any active NICs (as does 127.0.0.1), but it is using the IPv6 address (must be hard-coded). You can see the same results in Windows XP with no IPv6 installed, so it has nothing to do with IPv6. I tried pining what should have resolved to 127.0.0.1 while the desktop system (with no wireless NICs) was connected via its Ethernet adapter, then again after pulling the cable from the router and waiting a couple of seconds, then again after plugging the cable back in. The same thing happens if instead of pulling out the cable, the NIC is disabled through software (the [Disable] button in the NIC’s Status dialog or via Device Manager). Conclusions It looks as though the HOSTS file is only being read and used if there is an active NIC, otherwise it is being ignored. This makes some sense in that if there are no active network adapters, then presumably there will not be any network activity, and thus no need to resolve host names via the HOSTS file. This assumption is specious however because it precludes locally hosted virtual servers. The HOSTS file should be used regardless of external DNS server connectivity, otherwise you cannot use simple/consistent/testing-production names for locally hosted servers when not connected to the Internet (for example web servers; help servers for Visual Studio, 3dsmax, etc.; and so on). Question Does anyone know how to force Windows to use the HOSTS file even if there are no active NICs? Appendix Figure 1: While the wireless NIC is connected to the router (the cable-modem is in standby, so no external Internet connectivity). Figure 2: With the wireless radio turned off (the Ethernet port is not unconnected in both cases). Figure 3: Same results in XP with no IPv6

  Read the article

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• Easiest way to replace preinstalled Windows 8 with new hard drive with Windows 7

  - by Andrew

  There are all kinds of questions and answers relevant moving Windows 8 to a new hard drive. I'm not seeing anything quite applicable to my situation. I have a new, unopened, unbooted notebook with pre-installed Windows 8. I will be replacing the hard drive before ever booting, unless that is not possible for some reason. I want to "downgrade" to Windows 7 Pro, and I want a clean installation. To do so legitimately, I apparently either need to: Upgrade Windows 8 to Windows 8 Pro using Windows 8 Pro Pack, then downgrade; or Just install a newly-licensed copy of Windows 7 Pro. (Let me know if I've missed an option.) Installation media is likely not a problem, though if I need something vendor-specific that I cannot otherwise download, that could present an issue (Asus notebook, if that matters). If I could, I would just buy the Pro Pack upgrade, swap the hard drive (without ever booting), then install Windows 7 Pro directly on the new hard drive, using the Pro Pack key for activation. Will this work? Are there any activation issues? Edited to clarify, as some comments and answers indicate confusion: Here is, ideally, what I want to do: Before ever powering on the notebook, remove the current hard drive. Replace this hard drive with a new, blank hard drive. Install a clean copy of Windows 7 Pro on this new, blank hard drive. Unless I have no choice to accomplish the end result (a clean install of Win7 Pro on the newly-installed, previously-blank hard drive), I am not wanting to: Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro). That would involve using the currenly-installed hard drive. I want to use a new, different hard drive. Copy the Win8 install to the new hard drive, then install Windows 7 "over" that installation. Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro), then copy the installation to the new hard drive. If I have to use one of those three options, I will, but only if there is no other choice. Please note that this question is not about licensing: I will purchase the necessary license(s) to accomplish this procedure legally (apparently either Win8 Pro Pack or Win7 Pro -- the former currently appears less expensive).

  Read the article

• What other protocols must not be fire-walled for FTP to work?

  - by Chris

  my Netgear router randomly reset itself the other day loosing all of my config settings: DSL details, Firewall rules, the lot! So I set about restoring all of the details manually, but when it came to configuring the firewall I wanted improve the security by explicitly setting 'deny' rules for everything that I figured is 'non-essential', and (although not necessary) whilst I was at it I set explicit 'allow' for the 'essential' protocols. I'll admit now I didn't really know what I was doing and everything was just 'my best guess', but I enabled only DNS, HTTP, HTTPS, FTP, SFTP, TFTP with everything else blocked. This did not work for me as I could not access 99% of web sites (although strangely Google worked!), so I played around a bit more and found that (oddly) if I disabled just the explicit 'allow' rules then everything worked fine, for browsing anyway. Today I came to work on some web-sites via FTP and just could not get a consistent connection, it kept dropping out after a few files or being blocked by the server or simply not connecting. It would authenticate okay but then stop when retrieving the initial directory listing! e.g.: Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.domain.co.uk Status: Resolving address of ftp.domain.co.uk Status: Connecting to 123.123.123.123:21... Status: Connecting to 123.123.123.123:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... I've checked and re-checked the FTP settings (they worked before anyway), I have Googled the I.T. out of the various protocols that I have blocked in the fire-wall but none seem essential to FTP (other than FTP/SFTP etc. which I have passively enabled). I'm (clearly) no server engineer, or protocols / fire-wall expert so I was hoping that some one could maybe shed some light on why my FTP is failing. I've been wondering if I ought to be allowing BGP, BOOTP and/or IDENT (or any others)? What other protocols are required for FTP? Thanks in advance!

  Read the article

• Skyrim: Heavy Performance Issues after a couple of location changes

  - by Derija

  Okay, I've tried different solutions: ENB Series, removing certain mods, checking my FPS Rate, monitoring my resources, .ini tweaks. It's all just fine, I don't see what I'm missing. A couple of days ago, I bought Skyrim. Before I bought the game, I admit I had a pirated copy because my girlfriend actually wanted to buy me the game as a present, then said she didn't have enough money. Sick of waiting, I decided to buy the game by myself. The ridiculous part is, it worked better cracked than it does now uncracked. As the title suggests, after entering and leaving houses a couple of times, my performance obviously drops extremely. My build is just fine, Intel i5 quad core processor, NVIDIA GTX 560 Ti from Gigabyte, actually stock-OC, but manually downclocked to usual settings using appropriate Gigabyte software. This fixed the CTD issues I had before with both Skyrim and BF3. I have 4GB RAM. A website about Game Tweaks suggested that my HDD may be too slow. A screenshot of a Windows Performance Index sample with the subscription "This is likely to cause issues" showed the HDD with a performance index of 5.9, the exact same mine has, so I was playing with the thought to purchase an SSD instead, load games onto it that really need it like Skyrim, and hope it'd do the trick. Unfortunately, SSDs are likewise expensive, compared to "normal" HDDs... I'm really getting desperate about it. My save is gone because the patches made it impossible to load saves of the unpatched version and I already saved more than 80 times despite being only level 8, just because every time I interact with a door leading me to another location I'm scared the game will drop again. I can't even play for 30 mins straight anymore, it's just no fun at all. I've researched for a couple of days before I decided to post my question here. Any help is appreciated, I don't want to regret having bought the game... Since it actually is the best game I've played possibly for ever. Sincerely. P.S.: I don't think it's necessary to say, but still, of course I'm playing on PC. P.P.S.: After monitoring both my PC resources including CPU usage and HDD usage as well as the GPU usage, I don't see any changes even after the said event. P.P.P.S.: Original question posted here where I've been advised to ask here.

  Read the article

• web services access not being reached thru the web browser

  - by Tony

  I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

  Read the article

• 403 Forbidden Error when trying to view localhost on Apache

  - by misbehavens

  I think my Apache must be all screwed up. I don't know if it ever worked. I just upgraded to Snow Leopard, and the first step on this tutorial is to start apache and check that it's working by opening http://localhost. It starts fine but when I go to localhost I get a 403 forbidden error. I don't know where to start figuring out how to fix it, so I wonder if a fresh install of Apache would do the trick. What do you think? Update: I found some error logs in /private/var/log/apache2/. Found this in one of the logs. Not sure what it means: [Tue Nov 10 17:53:08 2009] [notice] caught SIGTERM, shutting down [Tue Nov 10 21:49:17 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] Warning: DocumentRoot [/usr/docs/dummy-host.example.com] does not exist Warning: DocumentRoot [/usr/docs/dummy-host2.example.com] does not exist httpd: Could not reliably determine the server's fully qualified domain name, using Andrews-Mac-Pro.local for ServerName mod_bonjour: Skipping user 'andrew' - cannot read index file '/Users/andrew/Sites/index.html'. [Tue Nov 10 21:49:19 2009] [notice] Digest: generating secret for digest authentication ... [Tue Nov 10 21:49:19 2009] [notice] Digest: done [Tue Nov 10 21:49:19 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2 PHP/5.3.0 configured -- resuming normal operations Update: I also found something in the dummy-host.example.com-error_log file. I didn't set these dummy-host things by the way. Is this the default configuration? [Tue Nov 10 21:59:57 2009] [error] [client ::1] client denied by server configuration: /usr/docs Update: Woohoo! I found the file that had the virtual host definitions. It was in /etc/apache2/extra/httpd-vhosts.conf. It had those two dummy virtual host settings in there. I added a localhost virtual host. Not sure if this is necessary, but since it wasn't working before, decided to do it anyway. After removing the old virtual hosts, adding my new localhost virtual host, and restarting apache, it seems to work. So I guess whenever I want to add a virtual host, I only need to add them to this file? Or is there a hosts file somewhere, like there is on Linux? Update: Yes, there is an /etc/hosts file that need to be changed to. Add the virtual host name to that file.

  Read the article

• System Requirements of a write-heavy applications serving hundreds of requests per second

  - by Rolando Cruz

  NOTE: I am a self-taught PHP developer who has little to none experience managing web and database servers. I am about to write a web-based attendance system for a very large userbase. I expect around 1000 to 1500 users logged-in at the same time making at least 1 request every 10 seconds or so for a span of 30 minutes a day, 3 times a week. So it's more or less 100 requests per second, or at the very worst 1000 requests in a second (average of 16 concurrent requests? But it could be higher given the short timeframe that users will make these requests. crosses fingers to avoid 100 concurrent requests). I expect two types of transactions, a local (not referring to a local network) and a foreign transaction. local transactions basically download userdata in their locality and cache it for 1 - 2 weeks. Attendance equests will probably be two numeric strings only: userid and eventid. foreign transactions are for attendance of those do not belong in the current locality. This will pass in the following data instead: (numeric) locality_id, (string) full_name. Both requests are done in Ajax so no HTML data included, only JSON. Both type of requests expect at the very least a single numeric response from the server. I think there will be a 50-50 split on the frequency of local and foreign transactions, but there's only a few bytes of difference anyways in the sizes of these transactions. As of this moment the userid may only reach 6 digits and eventid are 4 to 5-digit integers too. I expect my users table to have at least 400k rows, and the event table to have as many as 10k rows, a locality table with at least 1500 rows, and my main attendance table to increase by 400k rows (based on the number of users in the users table) a day for 3 days a week (1.2M rows a week). For me, this sounds big. But is this really that big? Or can this be handled by a single server (not sure about the server specs yet since I'll probably avail of a VPS from ServInt or others)? I tried to read on multiple server setups Heatbeat, DRBD, master-slave setups. But I wonder if they're really necessary. the users table will add around 500 1k rows a week. If this can't be handled by a single server, then if I am to choose a MySQL replication topology, what would be the best setup for this case? Sorry, if I sound vague or the question is too wide. I just don't know what to ask or what do you want to know at this point.

  Read the article

• Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server

  - by Adam Cameron

  This is on Windows 7 Home Premium edition. I have got two ColdFusion 10 (updater 2) instances: "cfusion" (the default one), and "scratch". I have got a single instance of Apache 2.2 running. Within Apache, I have set up two virtual hosts, each of which needs to be served by a different ColdFusion instance. Each of the CF instances serves files fine via Tomcat's internal web server. Apache serves vanilla HTML files fine too. So both CF instances, and both virtual hosts separately work OK. I can get wsconfig.exe to connect either one of the CF instances to the Apache server, and serve CF files via Apache & that instance. However I cannot find a way of connecting the second CF instance to Apache as well, so that both CF instances are conected, each serving one of the virtual hosts. WSConfig doesn't seem to understand the notion of "multiple CF instances", and the changes it makes to the httpd.conf (via mod_jk.conf) does not seem to be implemented in such a way as to accommodate multiple CF instances talking to a single Apache instance, or multiple virtual hosts. I freely admit to not being confident enough with how mod_jk (or even really httpd.conf) works to be able to guess if I can change stuff to make it work. If I try to add the second CF instance using WSConfig, I just get a message "the web server is already configured for ColdFusion". Be that as it may... not the instance of ColdFusion I want to connect it to! If I remove the existing connector to whichever instance is already connected, I can then connect the other one no problems. Not that this helps, but it demonstrates that the CF instance can connect to Apache. This all used to be fairly straight fwd under older versions of CF and JRun :-( The only docs I have found are on the "Connect multiple Apache virtual hosts on a web server to a single ColdFusion server" page, but that specifically only deals with a single CF instance. There is no equivalent page for multiple CF instances. I'm kinda hoping I can move some of the mod_jk config into my virtual host entries in httpd-vhosts.conf (this is how it used to work for JRun), but I've no idea what to put where. I think I've covered all the necessary info here? If not, sing out and I'll add more. Thanks. PS: tried to specifically tag this as "ColdFusion-10" as the answer will be different from previous CF versions, but it won't let me cos my rep on this site is too low (odd how it doesn't consider my rep from other S/O sites...). If someone with sufficient rep can add it, that'd be cool: it's probably a valid tag to have. Ta.

  Read the article

• Permission denied install Joomla CiviCRM

  - by Tim

  Dear All, I am trying to install CiviCRM on a Joomla 1.5.17 web server running Ubuntu 9.10. Uploading the package to the tmp directory in /var/www/[site name]/tmp and installing creates this error: Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: include_once(/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php) [function.include-once]: failed to open stream: Permission denied in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: include_once() [function.include]: Failed opening '/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php' for inclusion (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: require_once(DB.php) [function.require-once]: failed to open stream: No such file or directory in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Fatal error: require_once() [function.require]: Failed opening required 'DB.php' (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Initially I got a permissions denied error and thought that Joomla did not have permissions to all its directories but looking at Help-System information all the necessary directories are writable. I then decided to chmod 777 all the directories and try again but it still fails. Looking at the directories afterwards it seems that the new directories being created are not being created 777. By changing them I can get at least one step further before the error appears again. My question is does anyone know how to get round this? I am thinking that the new directories being created will require sudo privileges to have mv and create actions carried out, hence the permission denied errors. Can this be configured in Joomla? Or is there a way to specify that new directories created in /var/www/[site name] take 777 by default? any help greatly appreciated! EDIT: P.S. if anyone could give me a clue as to how the insert code feature works as well that would be great! Might make this post a bit more readable! EDIT2: Well I have had a bash at changing the permissions and ownership. sudo chown -R www-data:www-data /var/www/trbcp I then tried changing the whole /var directory (insecure I know but this is a test and dev server for me to find my feet on) to 777 and still getting permission errors. It seems to be error opening stream? Not a php guy so not sure what that is but could it be that permissions to run php script need to change? any thoughts greatly appreciated.

  Read the article

• Moving from single-site to multi-site Active Directory has broken OWA proxying

  - by messick

  Originally we had the following setup: OfficeExch01 has Mailbox Role and CAS Role OfficeExch01 is in the office. CoLoExch01 had just CAS Role. CoLoExch01 is internet facing and in a CoLo. Three AD domain controllers in the default site. Users could go to https://webmail.whatever.com/owa, get proxyed to OfficeExch01 and everything was great. Well, we recently setup a separate AD site and put a domain controller and the ColoExch01 server in the new site. I also made that remote DC be a Global Catalog. Now, users get the following error: Outlook Web Access is not available. If the problem continues, contact technical support for your organization and tell them the following: There is no Microsoft Exchange Client Access server that has the necessary configuration in the Active Directory site where the mailbox is stored. I also see event 41 errors in the logs: The Client Access server "https://webmail.xxxxxxx.com/owa" attempted to proxy Outlook Web Access traffic for mailbox "/o=XXXXX/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxxxk". This failed because no Client Access server with an Outlook Web Access virtual directory configured for Kerberos authentication could be found in the Active Directory site of the mailbox. The simplest way to configure an Outlook Web Access virtual directory for Kerberos authentication is to set it to use Integrated Windows authentication by using the Set-OwaVirtualDirectory cmdlet in the Exchange Management Shell, or by using the Exchange Management Console. If you already have a Client Access server deployed in the target Active Directory site with an Outlook Web Access virtual directory configured for Kerberos authentication, the proxying Client Access server may not be finding that target Client Access server because it does not have an internalUrl parameter configured. You can configure the internalUrl parameter for the Outlook Web Access virtual directory on the Client Access server in the target Active Directory site by using the Set-OwaVirtualDirectory cmdlet. Looking this up I see a lot talk about ExternalURL and InternalURL settings. However, everything worked great until we made the new AD site. I also made sure the internal CAS server's /owa virtual directory is set to use Integrated Authentication. Is there something I need to do to allow Exchange to see that I've made these AD changes?

  Read the article

• configuring slime in emacs

  - by CodeKingPlusPlus

  I am in the process of configuring slime for emacs. So far I have read about basic functionality for common lisp such as C-c C-q which invokes the command slime-close-parens-at-point which places the proper number of parens where your mouse is. Another command that seemed cool was invoked by C-c C-c and it would pass the code you are editing in a buffer to the REPL, and "compile" it. Why won't these commands work for me? Anyway, I have downloaded slime via M-x list-packages and do not seem to have this functionality (C-h w and then any of these commands tells me that these commands do note exist). So, I saw a bunch of other slime extensions such as slime-repl', 'slime-fuzzy' and 'hippie-expand-slime'. So I again usedM-x list-packages` and downloaded them. Still I did not have these commands. Here is the content of my emacs file relevant to slime: ;;;Common Lisp and Slime (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-20130626.1151") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-repl-201000404") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/hippie-expand-slime-20130226.1656") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-fuzzy-20100404") (require 'slime) (setq slime-lisp-implementations `((sbcl ("/usr/bin/sbcl")) (ecl ("/usr/bin/ecl")) (clisp ("/usr/bin/clisp" "-q -I")))) (require 'slime-repl) (require 'slime-fuzzy) (require 'hippie-expand-slime) When I execute M-x slime I get the following message in the inferior-lisp buffer where I can execute common lisp code (however, shouldn't this be the slime-repl since I required it?): STYLE-WARNING: redefining EMACS-INSPECT (#<BUILT-IN-CLASS T>) in DEFMETHOD STYLE-WARNING: Implicitly creating new generic function STREAM-READ-CHAR-WILL-HANG-P. WARNING: These Swank interfaces are unimplemented: (DISASSEMBLE-FRAME SLDB-BREAK-AT-START SLDB-BREAK-ON-RETURN) ;; Swank started at port: 46533. Then a slime-error buffer is created with the contents: Invalid protocol message: Symbol "CREATE-REPL" not found in the SWANK package. Line: 1, Column: 28, File-Position: 28 Stream: #<SB-IMPL::STRING-INPUT-STREAM {10056B9C33}> (:emacs-rex (swank:create-repl nil) "COMMON-LISP-USER" t 5) How should I modify my emacs file to give me the functionality of those commands? In my emacs file am I not loading the necessary files? Do I need to install an additional package? If you need more information let me know! All help is much appreciated!

  Read the article

• RSH between servers not working

  - by churnd

  I have two servers: one CentOS 5.8 & one Solaris 10. Both are joined to my workplace AD domain via PBIS-Open. A user will log into the linux server & run an application which issues commands over RSH to the solaris server. Some commands are also run on the linux server, so both are needed. Due to the application these servers are being used for (proprietary GE software), the software on the linux server needs to be able to issue rsh commands to the solaris server on behalf of the user (the user just runs a script & the rest is automatic). However, rsh is not working for the domain users. It does work for a local user, so I believe I have the necessary trust settings between the two servers correct. However, I can rlogin as a domain user from the linux server to the solaris server. SSH works too (how I wish I could use it). Some relevant info: via rlogin: [user@linux~]$ rlogin solaris connect to address 192.168.1.2 port 543: Connection refused Trying krb4 rlogin... connect to address 192.168.1.2 port 543: Connection refused trying normal rlogin (/usr/bin/rlogin) Sun Microsystems Inc. SunOS 5.10 Generic January 2005 solaris% via rsh: [user@linux ~]$ rsh solaris ls connect to address 192.168.1.2 port 544: Connection refused Trying krb4 rsh... connect to address 192.168.1.2 port 544: Connection refused trying normal rsh (/usr/bin/rsh) permission denied. [user@linux ~]$ relevant snippet from /etc/pam.conf on solaris: # # rlogin service (explicit because of pam_rhost_auth) # rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_lsass.so set_default_repository rlogin auth requisite pam_lsass.so smartcard_prompt try_first_pass rlogin auth requisite pam_authtok_get.so.1 try_first_pass rlogin auth sufficient pam_lsass.so try_first_pass rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth required pam_unix_auth.so.1 # # Kerberized rlogin service # krlogin auth required pam_unix_cred.so.1 krlogin auth required pam_krb5.so.1 # # rsh service (explicit because of pam_rhost_auth, # and pam_unix_auth for meaningful pam_setcred) # rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 # # Kerberized rsh service # krsh auth required pam_unix_cred.so.1 krsh auth required pam_krb5.so.1 # I have not really seen anything useful in either system log that seem to be directly related to the failed login attempt. I've tail -f'd /var/adm/messages on solaris & /var/log/messages on linux during the failed attempts & nothing shows up. Maybe I need to be doing something else?

  Read the article

• debian gateway using iptables

  - by meijuh

  I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

  Read the article

• Updating the $PATH for running an command through SSH with LDAP user account

  - by Guillaume Bodi

  Hi all, I am setting up a Mac OSX 1.6 server to host Git repositories. As such we need to push commits to the server through SSH. The server has only an admin account and uses a user list from a LDAP server. Now, since it is accessing the server through a non interactive shell, git operations are not able to complete since git executables are not in the default path. As the users are network users, they do not have a local home folder. So I cannot use a ~/.bashrc and the like solution. I browsed over several articles here and there but could not get it working in a nice and clean setup. Here are the infos on the methods I gathered so far: I could update the default PATH environment to include the git executables folder. However, I could not manage to do it successfully. Updating /etc/paths didn't change anything and since it's not an interactive shell, /etc/profile and /etc/bashrc are ignored. From the ssh manpage, I read that a BASH_ENV variable can be set to get an optional script to be executed. However I cannot figure how to set it system wide on the server. If it needs to be set up on the client machine, this is not an acceptable solution. If someone has some info on how it is supposed to be done, please, by all means! I can fix this problem by creating a .bashrc with PATH correction in the system root (since all network users would start here as they do not have home). But it just feels wrong. Additionally, if we do create a home folder for an user, then the git command would fail again. I can install a third party application to set up hooks on the login and then run a script creating a home directory with the necessary path corrections. This smells like a backyard tinkering and duct tape solution. I can install a small script on the server and ForceCommand the sshd to this script on login. This script will then look for a command to execute ($SSH_ORIGINAL_COMMAND) and trigger a login shell to run this command, or just trigger a regular login shell for an interactive session. The full details of this method can be found here: http://marc.info/?l=git&m=121378876831164 The last one is the best method I found so far. Any suggestions on how to deal with this properly?

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• Specifying prerequisites for Puppet custom facts?

  - by larsks

  I have written a custom Puppet fact that requires the biosdevname tool to be installed. I'm not sure how to set things up correctly such that this tool will be installed before facter tries to instantiate the custom fact. Facts are loaded early on in the process, so I can't simply put a package { biosdevname: ensure => installed } in the manifest, since by the time Puppet gets this far the custom fact has already failed. I was curious if I could resolve this through Puppet's run stages. I tried: stage { pre: before => Stage[main] } class { biosdevname: stage => pre } And: class biosdevname { package { biosdevname: ensure => installed } } But this doesn't work...Puppet loads facts before entering the pre stage: info: Loading facts in physical_network_config ./physical_network_config.rb:33: command not found: biosdevname -i eth0 info: Applying configuration version '1320248045' notice: /Stage[pre]/Biosdevname/Package[biosdevname]/ensure: created Etc. Is there any way to make this work? EDIT: I should make it clear that I understand, given a suitable package declaration, that the fact will run correctly on subsequent runs. The difficulty here is that this is part of our initial configuration process. We're running Puppet out of kickstart and want the network configuration to be in place before the first reboot. It sounds like the only workable solution is to simply run Puppet twice during the initial system configuration, which will ensure that the necessary packages are in place. Also, for Zoredache: # This produces a fact called physical_network_config that describes # the number of NICs available on the motherboard, on PCI bus 1, and on # PCI bus 2. The fact value is of the form <x>-<y>-<z>, where <x> # is the number of embedded interfaces, <y> is the number of interfaces # on PCI bus 1, and <z> is the number of interfaces on PCI bus 2. em = 0 pci1 = 0 pci2 = 0 Dir['/sys/class/net/*'].each { |file| devname=File.basename(file) biosname=%x[biosdevname -i #{devname}] case when biosname.match('^pci1') pci1 += 1 when biosname.match('^pci2') pci2 += 1 when biosname.match('^em[0-9]') em += 1 end } Facter.add(:physical_network_config) do setcode do "#{em}-#{pci1}-#{pci2}" end end

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >