Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 181/356 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• Using 2-port LSI 2308-8e card to control 24 SAS HDDs

  - by GregC

  I would like to rely on a RAID-on-chip solution to control 24 SAS hard drives in a direct-attached environment. How would you approach this to get best bandwidth given that I'd like to spend less than $10,000 on the interconnect. I've read that LSI 2308 chip can easily handle 8-drive SSD RAID6 in hardware. I'd like to harness its power to control 24 SAS hard drives over an expander in an external enclosure. Currently I use an Infortrend S24S-G2240 external enclosure. It provides its own controller and expander. I'd like to use LSI 2308 controller for RAID6 somehow instead of the mystery controller in the enclosure. P.S. I tried to create SAS-expander as a tag, but my rep on this site is low.

  Read the article

• Bare-Metal Restores of Linux Servers with Tivoli

  - by Chad P

  We currently use IBM Tivoli to back up our Linux servers and we are looking for suggestions on the best way to restore to bare metal. I've read IBM's doc on this issue. Is that still relevant or is there a better way? Also, how do you handle testing a restore to a vm or another piece of hardware on the same network that the original server lives?

  Read the article

• speakers dont work in macbook pro

  - by Ali_IT

  I have a macbook pro but my Built-in stereo speakers don't work and it comes a red light from Headphone out/optical digital audio out port. my Built-in stereo speakers aren't dead because at first that OS runs it comes a sound from them but as soon as the macbook pro is ready when i play music they don't work and In the SOUND in system preferences the name of device for sound output is Digital Out. Is the problem from hardware or software. Is there any solution?

  Read the article

• Can I run 8 to 12 Monitors from one Laptop?

  - by Dan

  I would like to run at least 8 monitors & possibly 12, from a Dell Precision M6800 mobile Laptop Workstation. Monitors I want to run are Dell U2412M ( 1920x1200 ) Ultra Sharp Monitors. The specs for the Laptop are : Intel Core i7-4700MQ Processor (17.3") UltraSharp FHD(1920x1080) 8GB (2x4GB) 1600MHz DDR3L AMD FirePro M6100 w/2GB GDDR5 2.5 inch 500GB Solid State Hybrid Drive Is it possible to do it & if yes, what other hardware, software do I need besides monitors ? Thanks

  Read the article

• Windows server's HDD Spin down daily/nightly - Does it makes sense?

  - by Riccardo

  A Windows Server 2003 R2 has the following hard disk configuration: - 3 internal hard disks attached to a 3Ware unit, configured in Raid 1 + spare unit - 3 external USB backup disks: 2 Verbatim 1TB (Samsung HD103SI) + 1 Western Digital 1TB (WD10EADS) The server runs 365 days per year, h24, however: - at daytime the server/user usage is limited to the internal hard disks - at nighttime there's no user usage, apart from scheduled maintenance tasks, basically the Server will be idle from 7PM to 8AM. apart from nighly backups (few hours). I was wondering if: (a) it makes any sense let Windows manage power savings, allowing disks to spin down accordingly, ** OR** let the disks stay awlays-on, to avoid permature wearing, due to continuous spin up/down (b) leave internal disks always on, and force external disks to power down while idle (this requires third party tools, such as Verbatim's Green button utility) Your thoughts?

  Read the article

• How to install software on Amazon EC2 Windows instance?

  - by JohnIdol

  I've never used Amazon EC2 - I am thinking to test a few instances for running intensive computation processes I have a requirement for rather than buying real hardware. I am given to understand the thing is quite easy to setup - but I have no clue of how it actually works. Can I upload disc images and install just any software as on any other virtual machine or is there any significant difference? Any help appreciated!

  Read the article

• Alternative to Windows Home Server (WHS) backups

  - by Adam Tegen

  Since Microsoft announced the end of life for WHS, are there any alternatives? Specifically, I am interested in recovering from a catastrophic disk failure with WHS. For example, this is my ideal scenario when a desktop hard-drive fails (has a bad virus, etc): Install a disk of the same size or greater Boot the desktop with the Recovery Disc Point the recovery application at the WHS Pick the machine, the drive(s) and the date of the backup Have a couple beers Reboot to a working machine as if nothing happened. I would need to slap multiple disks in the machine without raid. It sounds like LVM will work here. It would be nice, but not required to have de-duplication of files when multiple machines are backed up. (Single Instance Storage)

  Read the article

• Enterprise desktop antivirus without a Windows server

  - by Adam

  Are there any desktop antivirus products suitable for use in an enterprise environment without a Windows server? We're currently using McAfee for our Windows desktops but to get updates and alerts with the latest version it looks like you need to be running their EPO server software. I'd like to avoid the cost of hardware and Windows licensing, and if possible to run just client-based antivirus. Ideally it would support: Updates from an internal copy of the definitions (e.g. a wget mirror) Automated configuration of the install Alerts from the client via email

  Read the article

• MacBook Pro won't sleep when closing lid

  - by Eelco Visser

  My one month old MacBook Pro suddenly does not sleep anymore when I close the lid. There might be a relation to the Caffeine program that I installed recently. Caffeine prevents a Mac from going into sleep. But I have the problem when Caffeine is not even running. What reasons could there be for this problem happening? I'm hoping its a software problem instead of some hardware failure.

  Read the article

• Shrink Partition on Production Server

  - by Campo

  SO our production server was only setup with one large partition. I have setup a standby server and properly partitioned it. Now the boss wants the production environment's partition shrunk. It is an HP DL380 G5 We have 4 hot swap drives in a raid 5. How best should I go about doing this. Seems like a bad idea to me. Should I use windows or HP to do the partitioning? What should I be aware of in a production environment? The idea is to put the site (Inetpub) on a separate partition instead of the C: drive. How much downtime should I expect? Is this a terrible idea? Anything else I have missed?

  Read the article

• how do i learn how to become really tech savvy with computers? [closed]

  - by alex

  i'm looking to become really really good at understanding my machine. this includes hardware, software, firmware, the internet, creating my own network, troubleshooting problems, etc. I have an aerospace engineering degree so i'm technically inclined, but i want to really delve deeper in becoming a techno guru. what literature should i start reading? books, textbooks, journals, articles, papers, etc. anything would help, thanks!

  Read the article

• Video memory buswidth vs video memory Bandwidth

  - by Mixxiphoid

  My current video card (9600GT) is dying and I'm searching for a new video card. Between acquiring my current one and now, I got a lot more knowledge about hardware and I want to use that to pick my new card. So I decided to not just buy some popular card blindly, but to search for a card able to handle my hardware requirements. I searched the specs at the NVidia site for the GT640 and was confused by the memory section and some questions raised. My current card's memory bus width is 256bit and has 1GB of memory. I checked Google about the importance of bus width. And all the links basically said the same 'The higher the number the more potential simultaneously traffic can be transferred'. This was already clear to me, yet there are currently a lot of new cards which are considered better than my current one with a lower bus width. To go in more detail about my question I copied the memory info from the NVidia site: GT 640 GT640 GDDR5 Memory Specs: Memory Clock 1.8 Gbps 5.0 Gbps Standard Memory Config 2048 MB 1024 MB Memory Interface DDR3 GDDR5 Memory Interface Width 128-bit 64-bit Memory Bandwidth (GB/sec) 28.5 40.0 What puzzled me is that the Memory Bandwidth seems to me the most important part, yet the lower bus width has the higher 'performance'. Is this due to the fact the memory interface is GDDR5 and is therefore able to have a higher memory clock speed (5Gbps)? If I am to buy a new video card, should I check the bus width? Memory clock? Bandwith? Amount of memory? My current card ahs 1GB memory, so I was searching for a 2GB memory card, but now I'm not so sure any more whether that is really 'better'. My main question: To me it seems that memory performance is made up by the combination of bus width and frequency. Is this true? If yes, why are there so many sites telling me I need to get a card with a high bus width? If no, then what IS important when it goes about memory performance on a video card. NOTE: The memory bandwidth is (almost) never displayed on vendor sites. How can I determine which card is better without knowing the bandwith?

  Read the article

• How to know which operating system is suitable for my PC between 32/64-bit?

  - by avirk

  I'm using 32-bit operating system since I've my laptop. I've never used the 64-bit operating system so I'm much curious about this that if I upgrade to 64-bit still my pc will give me the same performance. However I've checked about my hardware from this question. I don't know about those result that what they are saying? So I'm here for little help to know that is there any performance issue after upgrading or not?

  Read the article

• Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

  - by user38586

  I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

  Read the article

• postgres memory allocation tuning 2

  - by pstanton

  i've got a Ubuntu Linux system with 12Gb memory most of which (at least 10Gb) can be allocated solely to postgres. the system also has a 6 disk 15k SCSI RAID 10 setup. The process i'm trying to optimise is twofold. firstly a single threaded, single connection will do many inserts into 2-4 tables linked by foreign key. secondly many different complex queries are run against the resulting data, using group by extensively. this part especially needs to be optimised. i have four of these processes running at once in order to make use of the quad core CPU, therefore there will generally be no more than 5 concurrent connections (1 spare for admin tasks). what configuration changes to the default Postgres config would you recommend? I'm looking for the optimum values for things like work_mem, shared_buffers etc. relevant doco thanks!

  Read the article

• Trying to determine the correct number of XFS allocation groups for postgresql server on Linux

  - by HBlend

  I am running a postgres 8.4.5 server on the linux 2.6.33.7 kernel on an 8 disk raid array with an LSI controller. Most of the tables are around 1GB or less. I know that XFS uses allocation groups (AG) to achieve I/O parallelism. My first question is, does this mean that if two tables are in the same AG, all I/O requests are queued to both of them if either is being read from/written to? If so, I assume I would want to spread my tables across as my allocation groups as possible, correct? Wouldn't this ensure that multiple users querying different tables would get the best performance?

  Read the article

• How can I tell if I have PCI Express 2.0 or 2.1?

  - by Stefan Lasiewski

  I am looking at a variety of PCI Express cards, such as a SATA RAID Controller and a Video Card. Some of these cards say they only support PCI Express 2.1, not PCI Express 2.0. I know that my motherboard supports PCI Express 2-something, but the manual doesn't say '2.0' or '2.1'. How can I tell if the PCIe slot on my motherboard is PCI Express 2.0 or PCI Express 2.1? Is it possible to determine the PCIe type from the Windows or Linux commandline? I was under the impression that most PCI Express 2.1 devices are backwards compatible with PCI Express 2.0. Is it possible that the vendor is wrong in saying that PCI Express 2.1 is required?

  Read the article

• optimizing file share performance on Win2k8?

  - by Kirk Marple

  We have a case where we're accessing a RAID array (drive E:) on a Windows Server 2008 SP2 x86 box. (Recently installed, nothing other than SQL Server 2005 on the server.) In one scenario, when directly accessing it (E:\folder\file.xxx) we get 45MBps throughput to a video file. If we access the same file on the same array, but through UNC path (\server\folder\file.xxx) we get about 23MBps throughput with the exact same test. Obviously the second test is going through more layers of the stack, but that's a major performance hit. What tuning should we be looking at for making the UNC path be closer in performance to the direct access case? Thanks, Kirk (corrected: it is CIFS not SMB, but generalized title to 'file share'.) (additional info: this happens during the read from a single file, not an issue across multiple connections. the file is on the local machine, but exposed via file share. so client and file server are both same Windows 2008 server.)

  Read the article

• Testing my new 120 Hz monitor.

  - by D Connors

  I just got a Samsung Syncmaster 2233 at a local store, and it's suppose to reach 120 Hz frequencies. I plan on using it with Nvidia 3D vision later on, but I don't have the hardware for that yet. In the mean time, I just want to test the monitor to see if it's working ok. Obviously, if I set it to 120Hz I can't notice any visual difference compared to 60Hz. So how can I test if the monitor is reaching the higher frequency? Thanks

  Read the article

• Verify server performance

  - by George Kesler

  I'm looking for a quick and SIMPLE way to verify that new servers are performing as expected. The most important metric is disk performance, second is network performance. I’m trying to prevent problems caused by misconfiguration of RAID arrays, NIC teaming etc. The solution should work with both physical and virtual servers. I don’t need sophisticated analysis with different workloads, just one set of benchmarks which I would run against a reference server and later compare to new ones. One problem is that most benchmarks are not giving accurate results when running on a VM.

  Read the article

• Win 2008 single server development environment (architecture)

  - by Tommy Jakobsen

  I have a few questions about a test development environment that I’m setting up on this server: Intel Core i7-920 Quadcode incl. Hyper Threading 8 GB DDR3 RAM 2x 750 GB SATA-II (probably software RAID 1) The server is going to support max 5 users, maybe 10 when stressed. I was hoping that I could run all the following products on the same server: Windows Server 2008 R2 x64 w/ IIS SQL Server 2008 x64 (R2 when released) Team Foundation Server 2010 Sharepoint Foundation 2010 I know this sounds overkill, but remember that this is for development purpose and testing. This is not a production environment. My question if this will be possible at all? Should I run it all on one Windows 2008 installation, or should I run it in multiple virtual environments using Hyper-V? What do you think?

  Read the article

• How do I combine static and dynamic DHCP leases on a Cisco router?

  - by Brad

  Basically, what I need is super similar to the unanswered cisco forum question below: https://supportforums.cisco.com/message/3139749#3139749 I have a Cisco 850 Series router. I have configured a DHCP pool for the 10.0.0.0/24 network. I have excluded 10.0.0.1 - 10.0.0.99 from the DHCP pool. I want to add a static DHCP pool for stuff and I want DHCP to statically assign them the addresses of my choice below 100. Actually, I don't care what addresses I statically assign. They can be anything in the pool for all I care, I just want it to work. Why are you doing this? Just statically assign the IPs on the devices! I don't want to do this because I have some laptop users. They could obviously only use that static IP here. This isn't a problem if they could be bothered to change any location setting or something. They can't. So it HAS to be DHCP. It also has to be static IPs because I need to forward ports to them. I know, I know, this is weird but it's an apartment LAN/WLAN so this isn't exactly a typical use case. Relevant sections of config below: ip dhcp excluded-address 10.0.0.1 10.0.0.99 ! ip dhcp pool Internal-net import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.1 domain-name 1770.local lease 7 ! ip dhcp pool static-pool import all origin file flash://staticmap default-router 10.0.0.1 domain-name 1770.local Contents of staticmap: *time* Aug 5 2010 09:00 AM *version* 2 !IP address Type Hardware address Lease expiration 10.0.0.100/24 1 001f.5b3e.d50a Infinite *end* You can see here I was trying addresses outside the excluded-address range to see if that would make any difference. My testing machine's MAC: mainframe:~ brad$ ifconfig en1 en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:3e:d5:0a What shows up in the DHCP binding table: basestar#show ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.0.0.112 0100.1f5b.3ed5.0a Aug 12 2010 10:06 AM Automatic What's up with the funny looking MAC in the DHCP binding table?? Is what I'm trying to accomplish basically impossible? Am I going about this the wrong way? All I want to to be able to port forward some ports to specific devices. The way I would do this with a consumer router is to do what I'm trying to do here; assign static DHCP to those devices then configure PAT for ports on those addresses.

  Read the article

• Macbook Pro keeps ejecting anything I put into the internal optical drive

  - by Wroblewski

  My hard disk crashed and I need to reinstall Mac OS X. I restart, insert the installation DVD, press c on the keyboard and the dvd ejects. I've tried different DVDs, even CDs. It's a Macbook Pro from march 2008. Is it broken? Or can it be something more severe like the firewire controller on the motherboard (since I noticed this after my hard drive started to act strangely)? I've ran Apple Hardware Test successfully.

  Read the article

• Move Virtual PC VM to another machine

  - by user1501700

  I need to move a virtual machine that was created with Windows Virtual PC to another machine. I just copied the files in the Virtual Machines folder to another PC, but when I tried to run it, I got this message: 'Windows XP mode' could not be restored because of either host processor type mismatch or lack of hardware-assisted virtualization support in the system Is it possible copy a virtual machine? What is correct way of achieving this?

  Read the article

• Are virtualization softwares allow guest Operating Systems to fully utilize host's drivers?

  - by afriza

  I like to use linux distros except for the lack of drivers that can fully utilize the hardware. As an example, graphic card drivers for linux cannot perform equally with their windows' counterpart even if they are from the same vendor! Does using virtualization reduce this problem? Which virtualization technologies / softwares perform well for this case?

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >