Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 185/613 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Cannot authenticate to SBS 2003

  - by Lerp

  I am trying to connect my machine to my work's entirely windows network and I am having a few issues: Whenever I try to access the server, the authentication dialog just keeps popping back up. I cannot connect to the printers (it says connecting to device failed) I have tried setting up samba, winbind, kerberos, likewise open all to no avail. I have a feeling I am just setting them up wrong. My nautilus shows this when I go to Network Windows Network MASTERMAGNETS I can ping both MASTERMAGNETS.LOCAL and 192.168.0.2 after modifying my /etc/hosts james@jamesmaddison:~$ cat /etc/hosts 127.0.0.1 localhost jamesmaddison 192.168.0.2 MASTERMAGNETS.LOCAL 192.168.0.50 Sharp-Printer # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters I believe that's the correct domain (not sure if that's the correct term) as when I do nslookup MASTERMAGNETS.LOCAL I get the following: james@jamesmaddison:~$ nslookup MASTERMAGNETS.LOCAL Server: 192.168.0.2 Address: 192.168.0.2#53 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.3 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.2 It all worked fine before I reinstalled Ubuntu and now I just cannot get access to the server. All help is appreciated, I need to get this working or I fear I will be forced to develop in a windows environment :(

  Read the article

• Remote support via VPN without split tunnel

  - by Robe Eleckers

  my title might not be very clear, but I'll explain my setup in more detail now. We have several customers (companies) that need to be remotely supported. At these customers we have servers running with our software that needs to be serviced. These servers are (almost) never connected to the internet. For this we have multiple PC's running VPN clients. These PC's run a VNC server so our service engineers can login from their home laptop remotely to these PC's and connect from there to our customer via the VPN connection on the PC. The problem is however that several customers do not allow split tunneling. That means that when we connect via VPN to such a customer the VNC connection drops. Our current workaround is using a Citrix VM which we control via XenCenter console, but it's quite slow. Are there common solutions to handle this?

  Read the article

• Can only see part of the screen when connecting via NX, how can I control NX size?

  - by Oak

  I'm using NoMachine's NX client on OSX 10.7.2 to connect to an NX server running on Ubuntu 10.04.3. I've chosen the Gnome desktop during the connection creation. The NX screen that opens is smaller than the Gnome screen running "behind" it it looks like it's 1024x768, while the screen "behind" it looks to be running 1680x1050. The result is naturally very inconvenient (e.g. can't see the taskbar, can't click lower options in popup menus, etc.). In the past I've used NX client successfully to connect and see the entire screen. Resizing the NX window only resizes the transferred image, but does not let me see more of the Gnome desktop. Playing with the NX client display options also does the same. How can I control the size of the NX client, and make it show the entire Gnome desktop?

  Read the article

• VPN only connects once and then fails

  - by Toby Allen

  I have a VPN connection setup to my office from home, it works great except for one thing. Once I connect and then disconnect the next time I go to connect to the vpn it hangs on verifying your username and password. No matter how many times I try. Once I restart my router it works again. My router is a belkin, the router on the other end is a Draytek. Any ideas? Is there a cache somewhere that needs to be reset, a setting?

  Read the article

• Error when trying to access Shared files from iMac via smb

  - by SatheeshJM

  I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

  Read the article

• Accessing C$ over LAN on Win2008R2 - cannot by hostname but can by IP and FQDN

  - by Idgoo

  Having an issue with one of our Win2k8 R2 file servers. Trying to access C$ or the Admin share is giving us an error (see error details that the bottom), however we are able to connect using the server's IP and FQDN. can access \\172.16.x.x\c$ with domain cred can access \\server.domain.local\c$ with domain creds cannot access \\servername\c$ with same domain creds Server pings fine with Hostname, IP, FQDN, the Primary DNS suffix is also correct. DNS, PTR and Wins records are all correct for the Server I have checked that I am not trying to connect with cached credentials in the Windows vault, the server is also appending primary and connection specific DNS suffixes to the hostname. Any ideas what might be causing this issue? Error Details: c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions

  Read the article

• I can't do a Remote Assistance session to a Windows XP box from Windows 7.

  - by superkinhluan

  My Mom's computer is running Windows XP, and my desktop running Windows 7. She's having some technical issue, so I want to do a Remote Assistance session to her machine. However, no matter what I've tried, the Remote Assistance program doesn't connect successfully. I've verified that the Windows Firewall (on both my and her machines) is configured properly to allow Remote Assistance program to go through. What's interesting is that I have the same problem when I try to do Remote Assistance from my desktop to my laptop, which is also running Windows XP. However, when I try to connect to my girlfriend's machine, which is runninng Windows 7 this time, the connection is successful. So in the end, I guess there must be some incompability between Windows 7 and Windows XP. Does anyone experience the same issue? How did you resolve it?

  Read the article

• Delphi Client-Server Application using Firebird 2.5 error

  - by Japie Bosman

  I have got a lengthy question to ask. First of all Im still very new when it comes to Delphi programming and my experience has beem mostly developing small single user database applications using ADO and an Access database. I need to take the transition now to a client server application and this is where the problem starts. I decided to use Firebird 2.5 embeded as my database, as it is open source, and it is can be used with the interbase components in Delphi and that multiple clients can access the database simultanously. So I followed the interbase tutorial in Delphi. I managed to connect the client to the server and see the data in the example (While both are running on my pc), but when i tried to move the client to another pc, keeping the server on mine and running it to see if I can connect to the server it gave me the following error. Exception EIdSocketError in module clientDemo.exe at 0029DCAC. Socket Error # 10061 Connection refused. I understand that this might be because the host is defined as localhost in the client. But here is my first question. In the TSQLConncetion you can set die hostname under Driver-Hostname. The thing I want to know is how do you do this at run time, as I cannot get the property when I try and make an edit box to allow the user to enter the value and then set it via code like for example: SQLConncetion1.Driver.Hostname := edtHost.text; The thing is there is not such property to set, so how do you set the hostname at run time? Im using Delphi XE2 There is still a lot of questions to come especially when it comes to deployment, but I will take this piece by piece and I appreciate the advice.

  Read the article

• How Can I assign an IP address to my virtual Windows Server, so that I can start using it almost as a VPS?

  - by Nelson Symonds

  We are a small office set up with two PC's out of which one of my PCs runs 24hrs. Its almost equivalent to a small server, but right now we're in need of a server which is why I am planning to keep my machine as well as a server into a single PC. I've used VMware Workstation to create a powerful Windows Server 2008 within my PC and I want to attach it to my Network Switch through the same PC where I am hosting it. I want to use it almost like a physical server with an IP address and everything so that I can connect from one Pc to the Server directly or my applications can connect to Server straight with the IP address. How should I do this? Step by step instructions would be appreciated. Thanks in Advance, Best regards Nelson

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• Ubuntu 11.04 and OpenLDAP - where is the config?

  - by Tom SKelley

  I've been asked to setup a multimaster LDAP environment on Ubuntu 11.04 - instead of a single master server. I cloned the master server and recreated it into two VMs. I am trying to follow the instructions on the OpenLDAP documentation here: http://www.openldap.org/doc/admin24/replication.html and it talks about modifying the cn=config tree within LDAP. The subdirectory tree appears to be there at: /etc/ldap/slapd.d/ and a slapcat -b cn=config drops out a load of config information. When I try to connect using a browser and the admin bind credentials: ldapsearch -D '<adminDN>' -w <password> -b 'cn=config' I get: # extended LDIF # # LDAPv3 # base <> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object I don't see the config context when I connect via an LDAP browser either. I'm sure I'm missing something, but I can't see what it is!

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• Internet Working, Browsing Not.

  - by jeffreypriebe

  I have a very odd problem that I can't resolve. I am connected to the internet, but my browsing doesn't work. I don't mean a web browser - I mean browsing. Firefox, Chrome, Curl all fail to successfully connect to an HTTP address. However existing connections, e.g. to mail in Outlook (Exchange Server and also IMAP server) continue to work. Also, the internet is on, I can confirm both from my machine (other ports / connections) as well as from any other computer connected to the same network. Additionally, it appears to be HTTP, not simple a port issue as HTTP over port 8443 (Tortoise SVN if you must know - running over HTTP not over SVN) also fails. I am using Windows Vista SP2 (build 6002). It seems to "creep up" in that after running the computer for a few hours it will fail. (No found way to systematically reproduce the problem.) Additionally, it seems to be more prone on days where the internet connection is flaky already (not sure why the internet is flaky, just is, lot's of failed browsing requests and have to retry/reload often). What I have tried (when the problem arises) - none have yielded any resolution: Resetting the network connection (dis-connect, re-connect) Disable/re-enable the network adapter Double-checked the ip settings Double-checked the HOSTS file. Note: DNS continues to work (both new and cached responses to DNS queries). (Thanks for the suggestion Daniel and antenore.) Checked the routing tables (ip4 only as ipv6 is beyond my understanding) resetting all involved hardware (routers and modems) Close and reopen browsers Looked for malware interference: Run HijackThis Looked for suspicious processes using SysInternals procexp. Looked for explorer hijacks, lsa provider interference, winsock provider interference using SysInternals Autoruns. Run a complete anti-virus scan. Reviewed the output of a netstat -onab to see if there were stuck ports open or unusual processes running somewhere The only thing that works is to do a full reboot. That works 100% of the time to restore browsing. What else can I try to nail down the problem?

  Read the article

• Plugged in Not Charging.

  - by Eric Johnson

  Suggested steps to fix the nasty Windows power management issue of plugged in not charging. Option 1: Disconnect AC Shutdown Remove battery Connect AC Startup Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1). Shutdown Disconnect AC Insert battery Connect AC Startup Option 2: Turn off laptop. Unplug AC power. Remove battery. Replace AC power. Turn on laptop, allow OS to boot. Once logged in to the machine, perform a normal shut down. Unplug AC power. Replace battery. Replace AC power. Turn on laptop, allow OS to boot. The battery should once again be charging as normal Additional troubleshooting techniques: Check battery charging status in the BIOS Update BIOS Replace Battery (I did this and the new battery is not charging) See if the battery charging light works when the laptop is powered down. Supporting Links: http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/ http://social.technet.microsoft.com/Forums/en/itprovistahardware/thread/741398c6-a733-482c-a33c-2b61d9bc2984 http://www.youtube.com/watch?v=6Xf-ipP0wSY&feature=fvw

  Read the article

• Remote desktop connection issues in windows server 2003

  - by rboorgapally

  Hi all, We are running windows server 2003 at our work place. I have enabled the remote desktop connections. I have also added all the users who connect to the server(three to four people) to the RDC group of users. Many of these users are also having Administrator access. The problem we are facing is that the connection is suddenly lost when we are working on something. Also, at times the system restarts by itself. Is this issue related to the limit on the number of users able to connect to the system? If so, why does the system accept new connections and/or terminate the existing connections? Has this anything to do with the users having administrator access so that all have equal prority and that is why existing connections are stalled? Also, please differentiate between console remote desktop and non console remote desktop.

  Read the article

• How to share computer's internet connection among network users

  - by RBA

  I wanted to connect to internet from my mobile through laptop wireless-broadband internet connection.. For that I have gone to Network Places, there i have done appropriate settings for "Wireless Network Connection" and "Bluetooth Personal Area Network Connection",, but that Bluetooth connection is still not showing connected.. I have checked the option for "Allow other network users to connect through this computers Internet connection", but still my Bluetooth Connection is still showing not connected.. Please help me out,, as to how can i achieve the same,, as i am having Broadband internet connection, which comes wirelessly to my laptop through a router/modem..

  Read the article

• Windows 7 Firewall configuration

  - by Will Calderwood

  I had a PC set up with a VPN. I used the Windows 7 firewall to block all NON-VPN traffic to the internet, but all LAN traffic was allowed. So, with the VPN connected I could connect to all networked machines and the internet. Without the VPN connected I could only connect to the LAN and had no internet access. Unfortunately my drive failed, and I'm setting up the machine again with a replacement drive. I can't for the life of me work out how to set up the firewall again. I can easily set it up to block all NON-VPN traffic, but can't work out how to that and still allow all LAN traffic whether the VPN is connected or not. Some pointers would be useful. Thanks.

  Read the article

• use yum behind a proxy on CentOS 5.6

  - by ewok

  I have a CentOS VM running in Virtualbox on a Windows 7 host (all 64-bit). I have configured the proxy in the System menu and have added the proxy=http://my.proxy.com:12345 line to my /etc/yum.conf file. I am able to connect to the internet from a browser, and I can update packages form the update manager and install them from the package manager. However, I cannot use yum for anything. When I attempt to use yum (install, update, upgrade, or anything else), It attempts to connect to the mirrors, does nothing, then after a minute or so, quits. Does anyone know how to configure yum to work behind a proxy?

  Read the article

• Windows Firewall allows connection from any IP regardless of rule that only allow a specific IP

  - by Pierre-Alain Vigeant

  I have configured the Windows Firewall to Block (default) incoming connection on the public profile. I have created a rule for a port (in this case, this is Sql Server) that explicitly states that only my office static IP is allowed. If I test from my office, I am able to connect to the port. I was expecting that anybody outside the office would not be able to connect, but this is not the case. I asked a friend to telnet the port to see if it would reply and it does even if he's not on my network. I am a bit confuse here. Shouldn't it block everybody but the given IP? Is my server completely unsecured?

  Read the article

• Management VLAN Cisco Catalyst

  - by cha789

  I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

  Read the article

• Another guvcview issue? Core dump!

  - by user290498

  guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

  Read the article

• switch's mgmt-ip is not remotely reachable.

  - by RainDoctor

  Switch model: Netgear FSM7352PS mgmt-ip: 192.168.1.100/24 Vlan id: 1 (default) There are couple of hosts in this Vlan: 192.168.1.2 (esxi console), for instance. 192.168.1.1 is the firewall/router interface. I can ping 192.168.1.1 and 192.168.1.2 from other vlans, say, 172.31.0.0/24 I can ssh to 192.168.1.2 from 172.31.0.0/24 I can't ping 192.168.1.100 from 172.31.0.0/24 However, I can ping 192.168.1.100 from 192.168.1.2 or from my laptop connected to that vlan (192.168.1.11). I can connect to the web GUI from my laptop when I am in that Vlan. Can anyone shed some light on why I am not able to connect from other vlans?

  Read the article

• SSL connection error during handshake on Windows Server 2008 R2

  - by Thomas

  I have a Windows 2008 R2 Server that runs a HTTPS Tunneling service. The software uses a certificate that is provided via the Windows certificate store. The certificate is located in the local computer private certificates. It supports server and client authentication with signing and keyencipherment. Cert chain The certificate chain looks fine. It's a Thawte SSL123 certificate. Thawte Premium Server CA (SHA1) [?e0 ab 05 94 20 72 54 93 05 60 62 02 36 70 f7 cd 2e fc 66 66] thawte Primary Root CA [?1f a4 90 d1 d4 95 79 42 cd 23 54 5f 6e 82 3d 00 00 79 6e a2] Thawte DV SSL CA [3c a9 58 f3 e7 d6 83 7e 1c 1a cf 8b 0f 6a 2e 6d 48 7d 67 62] Server certificate Issues Most browsers accept the certificate without any warning. But IE 7 on Windows XP SP3 and Opera 12 on OSX just report an connection error. Opera complains: Secure connection: fatal error (552) https://www.example.com/ Opera was not able to connect to the server, because the server does not communicate via any secure protocol known to Opera. A connection test using openssl s_client -connect www.example.com:443 -state says: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A 52471:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-35.1/src/ssl/s23_lib.c:182: ssldump -aAHd host www.example.com during curl https://www.example.com/ reports: New TCP connection #1: localhost(53302) <-> www.example.com(443) 1 1 0.0235 (0.0235) C>SV3.1(117) Handshake ClientHello Version 3.1 random[32]= 50 77 56 29 e8 23 82 3b 7f e0 ae 2d c1 31 cb ac 38 01 31 85 4f 91 39 c1 04 32 a6 68 25 cd a0 c1 cipher suites Unknown value 0x39 Unknown value 0x38 Unknown value 0x35 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x33 Unknown value 0x32 Unknown value 0x2f Unknown value 0x9a Unknown value 0x99 Unknown value 0x96 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 TLS_DHE_RSA_WITH_DES_CBC_SHA TLS_DHE_DSS_WITH_DES_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 TLS_RSA_EXPORT_WITH_RC4_40_MD5 Unknown value 0xff compression methods unknown value NULL 1 0.0479 (0.0243) S>C TCP FIN 1 0.0481 (0.0002) C>S TCP FIN Thawte provides two Java based SSL Checkers. The Legacy Thawte SSL Certificate Installation Checker and the sslToolBox. Both validate the certificate under Windows XP but report connection errors under OSX and Windows 2008 R2.

  Read the article

• Creating a backup - Rsync - Connection refused (111)

  - by pablofiumara

  I am trying to create a backup of my website for free. I just want to have a backup of my website, including not only all files and the configuration but also the databases. I mean, a full backup. If it can be done automatically, it would be better. I feel there are better ways than using the cpanel to achieve that (actually, I believe sometimes web hosters does not have any cpanel). I read the following on how to do it: Automatically mirror the entire contents and configuration of your main server to a secondary backup server on a completely separate network in a different data centre. Use RSync, FXP, cPanel voodoo, or whatever method you wish to automate syncing. That is why I installed Rsync Daemon which is an alternative to SSH for remote backups. I configured it but the test went wrong. The terminal is showing me this: pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share [sudo] password for pablofiumara: rsync: failed to connect to pablofiumara.com (50.87.147.75): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share failed to connect to 50.87.147.7 (50.87.147.7): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] What should I do? Is there a better or easier way to achieve what I wish (I mentioned this in the first paragraph)?

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >