Search Results

Search found 5728 results on 230 pages for 'power conditioning'.

Page 187/230 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Looking for comprehensive computer monitoring software

  - by cornjuliox

  Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

  Read the article

• Building a PC for Work and play? [closed]

  - by Derek Organ

  Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

  Read the article

• How to disable irritating Office File Validation security alert?

  - by Rabarberski

  I have Microsoft Office 2007 running on Windows 7. Yesterday I updated Office to the latest service pack, i.e. SP3. This morning, when opening an MS Word document (.doc format, and a document I created myself some months ago) I was greeted with a new dialog box saying: Security Alert - Office File Validation WARNING: Office File Validation detected a problem while trying to open this file. Opening this is probably dangerous, and may allow a malicious user to take over your computer. Contact the sender and ask them to re-save and re-send the file. For more security, verify in person or via the phone that they sent the file. Including two links to some microsoft blabla webpage. Obviously the document is safe as I created it myself some months ago. How to disable this irritating dialog box? (On a sidenote, a rethorical question: Will Microsoft never learn? I consider myself a power user in Word, but I have no clue what could be wrong with my document so that it is considered dangerous. Let alone more basic users of Word. Sigh....)

  Read the article

• How to move Mdadm RAID drive (EBS based) to different AWS Instance

  - by Stanley

  We have a media-rich web application that is hosted on AWS. We have several Web Servers and we have an NFS server. On the NFS server (Linux server) we have several EBS volumes that are mounted and we've used mdadm to implement the different mounted volumes as a single RAID volume. The Web Servers simply access the NFS storage through a mount point. Amazon has now let us know that they will be performing power maintenance on this server in a couple of days time. Since all our media is on here it would render our site unusable for the hours while Amazon is working on it. We want to try and prevent this downtime. I was thinking that we can prevent server downtime by perhaps setting up a new server temporarily and attaching the EBS drives (raid volume) to that server and have our web servers point there during maintenance. This is a very high risk operation since this involves several terabytes of our production data. What would be the safe way to move over our logical raid drive (md0) to a new amazon instance? I was hoping that I could start with building the new server, mounting the ebs volumes and assembling the RAID partition using mdadm --assemble --scan before unmounting from the existing instance so that I can first test that everything works and thus having it mounted on two instances at the same time, but I don't believe that is possible with the way that filesystems work. How do I move a Linux software RAID to a new machine? suggests a way to move drives, but isn't really a cloud-based question. Perhaps there are simpler ways to prevent system downtime with our solution being hosted on the cloud? I have considered taking an EBS snapshot, but that tries to replicate all the many terabytes of mounted storage, so this is not a practical solution. Any ideas?

  Read the article

• "Error: Unknown error" when trying to start virtual machine from VMware server

  - by slhck

  Problem We are running VMware Server 2.0.0 build-116503 on a Ubuntu 10.04 LTS server. There is a virtual machine installed, running Lotus Domino on Windows Server 2003. Ever since a sudden power failure last week, the virtual machine won't properly start up. When I run the command: vmrun -T server -h https://127.0.0.1:8333/sdk -u root -p jk2x2208 start "[standard] lotus/test.vmx" … after 30 seconds it displays: Error: Unknown error That's about everything I get. I know the command is right, since that's what we've used all the time. This has happened last Saturday after a scheduled backup shutdown, and somehow I was able to start it again. This week, it happened again, and I can't get it back up. Occasionally, I also get: Error: Cannot connect to the virtual machine When I get this, and I run the start command, it seemingly works. Why is this so random? Which configuration could have been messed up? What I've tried / other info I already shut down VMware itself with /etc/init.d/vmware stop. This works. I tried to start VMware again with /etc/init.d/vmware start. It complains that it's "not configured", which is why I had to rm /etc/vmware/not_configured, and then try to start again. There have been no software updates on the machine, and no configuration changes

  Read the article

• SSD causing 100% CPU usage in Apache/PHP

  - by Tim Reynolds

  I wanted to increase the performance on my development laptop so I added an Intel 320 Series SSD as my primary drive. Everything is amazingly fast, as expected, except Apache/PHP. I develop Magento by using an Ubuntu 10.10 virtual machine. Information: Host OS: Win 7 Professional 64bit Guest OS: Ubuntu 10.10 32bit Processor: i7 Chipset QM55 SSD: Intel 320 Series 160gb 30% full HDD: Hitachi 320gb 50% full (in side bay using an adapter) Laptop: Lenovo T510 Using: Shared folders Apache Version: 2.2.16 PHP Version: 5.3.3-1 APC Version: 3.1.3p1 APC Memory: 128M Using tmpfs for cache, log, session directories in Magento In the VM running on the SSD (VM files and source files are on the same drive) loading a product page in the Admin takes on average 26.2 seconds and uses 100% CPU for nearly the entire time. In the VM running on the old HDD loading the same page takes on average 4.4 seconds. It mostly uses around 40-50% of the CPU while rendering the page. I have read this post: Performance issues when using SSD for a developer notebook (WAMP/LAMP stack)? It says to change some settings in the bios. I have turned any and all power management features off in the bios. I can't for the life of me understand why this would be happening.

  Read the article

• Is Unix not a PC Operating System?

  - by Corelgott

  I am doing my Bachelor at a university. In a written assignment the professor posted the task: "Name 3 PC-Operating Systems". Well, I went on an included a variety of OS (Linux, Windows, OSx) including Unix & Solaris. Today I recieved a mail from my prof saying: Unix is not a PC-Operating System. Many Unix-variants are not PC-hardware compatible (like AIX & HP-UX. About Solaris: there was one PC-compatible version...) I am kind of suprised: Even if may Unix-variants are Power-PC and different bit-order – Those don't stop being PCs now, right? The question was given in a written assigment! It was not a question that came up during lecture! Due to the original task being in German, I'll include it just to make sure nobody suspects an error in the translation. Frage: Nennen Sie 3 PC-Betriebssysteme. Antwort: Unix ist kein PC-Betriebssystem, viele Unix-Varianten sind nicht auf PC-Hardware lauffähig (AIX, HP-UX). Von Solaris gab es mal eine PC-Variante.

  Read the article

• No video signal and server shuts down

  - by Ilya

  I have a brand new server. The motherboard is Intel S2600CP4, two 8-core Intel E5-2600 processors. RAM is 8 DIMM slots of 8 GB each (KVR1600D3D4R11SK4/32GI, I installed them into the blue slots), Power supply is 1050W Corsair. Most of the time the server won't start up - the fans are spinning, but I don't have video signal. And it keeps restarting on its own every 3 mins. But maybe after 30 mins it will eventually load and show something on the screen. I even was able to install ESXi 5.0 (vSphere) on it. It recognizes both CPUs and all of the 64GB of RAM. But even then it worked only for around 5 hours and then restarted on its own. What's the problem? That's a very expensive peace of hardware and I can't afford purchasing a new motherboard/CPU. By the way, on the front panel the "System Status" LED is constantly amber (not blinking), even when the server started successfully. And also in the BIOS I can see lots of "processor 01 unable to apply microcode update 8160" fatal errors. Please help me with issue, I will really appreciate this!

  Read the article

• Video output vanishes and it isn't the video card... suggestions?

  - by Ira Baxter

  I have a high-end dual processor Dell workstation that operated for several years without problem. Recently, the video output has gone flaky, in the sense that after 2-3 days, it loses synch with the monitor (sometimes you can still see a hashed-mess of the what you expect to see on the screen). Poking at the keyboard, and accessing the file system on the machine from over the network, indicates that the machine is running fine and its just the video. A reboot fixes the problem... for another day or two. This in effect makes the machine unusable. So, I replaced the video card with an exact duplicate bought from e-bay. (I checked after the dupe arrived to be sure, yep, same model number). I still get the same behavior. So unless I believe that both video cards are broken the same way, I have to beleive this is a problem with the motherboard/power supply, neither of which I am inclined to replace. The only other possibility I can think of is a Windows update to the graphics driver. How would I check for this? Anybody had a similar problem? Otherwise we're junking what used to be a perfectly good machine. (Another couple of hours of more wasted effort and that's it in terms of economics anyway).

  Read the article

• Converting An Older VMWare Image to ESXi

  - by Bart Silverstrim

  I have just installed VMWare ESXi and imported one physical machine without issue and one virtual machine, from an older version of VMWare Server on a Linux system, to it without issue. But I have another machine (Windows XP), virtual running on the VMWare Server, that I can't get the Converter to work with. Converter runs, says everything is fine, but when I go to the ESXi VSphere manager and hit the button to power up that vm, the console stays black with a blinking cursor and the processor for that VM spikes 100% and stays there. An event log item in VSphere warns something about activation issues with Windows. Has anyone else run into this issue before? Is it something with the disk controller? I copied the folder with the VM directly to the storage drive on ESXi hoping to create a new machine and point the data store to that folder or at least that drive image; nope, something about not using an IDE controller (must be something with the older format). In short, converter is doing something that particular machine doesn't like, and I can't find a way to simply open that hard disk image or convert it unless someone else has seen this. I try attaching a bootable CD image for disk repair to see if it can check the hard drive but I can't seem to get the console to boot from it...either too slow on the button or it just isn't able to easily boot from a virtual drive image (.iso). Any suggestions or help?

  Read the article

• Computer resetting semi-randomly

  - by Peter

  Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

  Read the article

• If I partition a drive connected via eSata will it show different partitions when connected via USB?

  - by jeffreypriebe

  I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

  Read the article

• How to choose the most optimal RAID settings on PE2950

  - by javano

  I have some Dell PowerEdge 2950's with 4x 15k, 150GB Cheetah SAS drives in them. They are going to be VM hosts, CentOS running ESXi with Windows Server 2k8 guests. Some guests will be hosting IIS servers, and others MSSQL servers. I am trying to set the RAID virtual disks settings and can't decide which is more optimal given this situation; Read Policy: Out of Read-Ahead, No-Read-Ahead and Adaptive Read-Ahead, the default is Read-Ahead. I will be making large sequential writes initially, writing out blank images for virtual machine hard drives (lets say 30GBs from /dev/zero for example) so Read-Ahead seems good at first. But within the virtual machines reads could be random from anywhere within their file systems as they are IIS and MSSQL servers, so perhaps No-Read-Ahead is a better idea? Now I think Adaptive Read-Ahead would be better then as a compromise but I don't know much about this option, how does it compare in performance to the others? Write Policy: write-back caching, write-through caching, the default is write-back caching. The default of write-back caching is safer than write-through caching but at a performance expense. My thinking here is that in the event of power loss for example, it seems more likely in my head (this is why I need some clarification!) that damage will occur to a guest VM with write-back caching enabled, so I should favour write-through? I have searched around and there is obviously no definitive answer, so I would like to find out what is best for my situation.

  Read the article

• Laptop shuts down randomly without warning

  - by Robert P.

  My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

  Read the article

• Looking for an application to record audio and video on a linux "embedded" device

  - by Luke404

  I am working with a linux x86 device with limited CPU resources (as a prototype we just use a pentium-m netbook). We'd like to record video from one V4L2 device (we'll probably end up using just USB Video Class devices like all modern webcams) and one audio stream from an ALSA source. The thing will not have screen and keyboard, and obviously no X11 environment. Goals are: do as little work as possible to cope with little cpu resources - for example I'd like to record video in the native MJPEG I get out of the UVC devices encoding audio to MPEG3 Layer-2 (aka mp2) is ok since it let us save a lot of space (compared to raw pcm samples) and does use little cpu power I don't mind loosing some video frames here and there (UVC devices do that) as long as I can get audio and video streams syncronized not require user input to start the thing (a python script takes care of initialization, startup, shutdown, etc...) be able to open the resulting files for postprocessing without too much effort (ie, if mplayer or vlc can play it, it's fine) So far the only app I found that could be started from command line and record V4L2 video + ALSA audio is mencoder but I'm having some difficulties with it. It should be able to do that but I cannot record audio and video together - just one of the two. And if I use two different processes to record to two different files I have no means to get them in sync (audio is more or less always correct, but video framerate will vary over time and it seems to lack timestamps to correctly play it back to the correct time). Long story short, how do you record an unconverted MJPEG stream (from an UVC device) and an audio stream (from an ALSA device, possibly encoding to any standard format) using a command line tool, to a single file (MPEG or any other container), keeping audio and video in sync?

  Read the article

• TV won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• Trouble with HP printer

  - by reyjavikvi

  I have a HP Photosmart C3180 (it's a printer/scanner). For some reason, it recently stopped working. The power light is blinking (I think all the other lights are one, but don't remember, I'm not there right now), and the only way to turn it off is to unplug it. It won't print anything, and when you put a page in the tray it sucks it in without printing anything on it and stops when the paper is on its way out (Again, I don't remember how we managed to get it out, sorry). This printer is hooked up to a computer running XP, but it doesn't work either when printing from the network. Weirdly, the scanner works fine. Do you have any ideas on what could be the problem? Could it be a driver problem? By the way, sorry if the question lacks a bit of detail. I don't know much about printers, and I don't have it here so I can't remember exactly all the details. If needed I can update the question tonight or tomorrow.

  Read the article

• Wireless to Wireless Transfer Slow on a Linksys WRT54GL

  - by Kyle Brandt

  The Situation: When I try to transfer a file from one computer to another that are both connected via wireless on a WRT54GL (in a office) with dd-wrt firmware I often get bad speeds. In generally they average around 100 kilobytes a second. Either computer can download via wireless from the Internet at at about 2 megabytes a second. The speed is slow with the transfer of one large file. There are about 20 other wireless networks that the computers can see, so there is a lot of noise, but I don't have the equipment to really monitor the frequencies well. But that still seems pretty slow. I thought maybe it was the transmit on each card, but even when they are 5 feet away with a line of sight I still get these speeds. According to Linux both cards are operating at 54g. My Questions: Is this normal for this sort of consumer level wireless equipment? Anything I can do to improve it? why is wireless to wireless transfer slow when everything else isn't? Whats steps might I take to figure out what is happening? For example, are lots of packets not making to the access point requiring retransmissions? Above all, I want to find out what the problem actually is. This may seem odd, but at this point I am more interested in understanding what the problem is than fixing it. What I have tried: I have tried messing with lots of settings. Different channels, xmit power, G-Only, none of which has made anything any better. I've also tried upgrading to newer dd-wrt firmware version and doing a reset to wipe out the settings.

  Read the article

• Wastage of resources in Virtualization

  - by Sabeen Malik

  I have asked this question on SO, but was suggested that i ask it here on SF, so here it goes. http://stackoverflow.com/questions/3010753/wastage-of-resources-in-virtualization I am not sure if this is the right place to ask the question. However i hope it is. When looking for a VPS earlier today, I was trying to understand how each container would work in the background. Keeping in mind the fact that the operating system uses most of the memory and power on a system, wouldn't having multiple operating systems in the same machine mean more wastage of resources. For instance if i was running centOS on a dedicated box and it was running lets say 20 background OS level processes. Then i go and install a virtualization platform and install 5 more centOS virtual machines in the same system which are exactly the same as the host operating system. Doesn't this mean duplication of those 20 processes 6 times? So internally the context switching is happening between 120 processes instead of 20? Further Notes: Here is an example of what i am thinking: I have a master-slave configuration for a long running, cpu + memory intensive process, which can be distributed to 4 machines. Lets say when the process runs on these 4 machines with lets say 1 Gh CPU and 1 Gig RAM, i get 400 results per hour from the cluster (assuming 100 results from one machine) . Now i get a bigger machine ( lets say 4Gh and 4 Gig RAM), have 4 virtual hosts on it with 1 Gz CPU and 1 Gig RAM. Will this configuration give me the same 4 results per hour from these 4 virtual hosts?

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Recover data from physically damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a physically damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are. Update I took the HD to Data Doctors, and they told me that the SATA connection was broken to they would need to replaced the data connector and then copy the data to a brand new hard drive. So, with the initial analysis, cost of replacement parts, and data recovery fee it came out to $865.00 USD. The technician specifically stated if this was an older hard drive that would just need to replace the data connector. But because there is specific information related to the individual hard drive in the flash ROM, they need to transfer the data to a brand new hard drive.

  Read the article

• Dell Studio 1555 not starting up

  - by Abhishek

  This is a 3-year-old laptop. I never had a big problem with it until now. I updated Kubuntu the night before yesterday. And Firefox got updated to version 18 and a few other related packages got updated. Then I shut down the laptop and restarted it, but it failed to start. I could hear the fan and the hard disk and the optical disk drive initialize. And the power button also lighted up. But there was no video - no POST or BIOS menu. I even opened the laptop up to the point when only the motherboard was the only thing attached to the base cover. I took it to the technician this evening. He checked it casually, and said that it might be a motherboard problem and will cost quite a bit to fix. Though he was not sure and said that he will give me a call after confirming the problem. Has anyone else had the same problem? What was it and what was the fix?

  Read the article

• Hard drive spark, can it be recovered?

  - by user163558

  Alright, so I was going to install Source Film Maker but I didn't have any space, so I decided to connect an HDD via an USB converter(image below). I shut down the machine, turned the PSU off, and connected via a Molex connector & the USB converter. I turned back on the PSU, no sparks or anything, everything normal, but when I turned on the machine, I heard some sizzing(lol?) and sparks flying and a little flame, but the PC was running fine. I pressed the power button instead pulling out the plug (I panicked) so it continued to short circuit for about 10 seconds. There's a very little part on the HDD that become ash, it's near the Molex connector and the circuit is a little black as well. I'm afraid that I will damage the HDD more so I didn't hook up the HDD after all. Do you think it's the PSU(came default with Cooler Master Elite 430, 500W) or it's the HDD(Samsung SP1203N)? P.S: I've attached the HDD same way before(like 3 months ago), and it worked. HDD burn: USB connector: Sorry for the bad image quality, taken with my phone.

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >