Search Results

Search found 5398 results on 216 pages for 'xorg conf'.

Page 188/216 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Set up multiple websites on a local web server

  - by mickburkejnr

  I have spent the last few days setting up a CentOS 6 server on my local network so that I can host multiple projects that I'm currently working on. Everything has been set up so that I access the server by typing 192.168.1.10 and the Apache test page comes up. What I'm aiming to do is to access different projects by typing in 192.168.1.10/project, and then view the project as if it was on it's own standalone server. I have thought about just sticking these sites inside folders on the server then accessing them that way, but a lot of my projects use CakePHP so this isn't feasible. So what I need to do is create VirtualHosts in Apache to allow me to do this, but without using a domain name. I want to stick to using the IP address of the machine (which is static). Any ideas? EDIT I've followed Peter's suggestion, but now I have a new problem. In the httpd.conf file I have entered the following information: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/html/project1 ServerName local.project1.com ErrorLog logs/local.project1.com-error_log CustomLog logs/local.project1.com-access_log common </VirtualHost> And now Apache is saying: Starting httpd: Warning: DocumentRoot [/www/html/project1] does not exist When it clearly does exist. I've disabled SELinux and I can confirm this isn't turned on. I've also checked the ownership of the folder, and its owned by root. I can also save files to these folders using a guest FTP account (which isn't associated to root), so the folders are being listed and can be written to. But when I try the folder in a web browser it doesn't seem to work either. I've also done a reboot of the server and the problem persists. What should I change in order to resolve this?

  Read the article

• Adding custom service to nagiosgraph

  - by ravloony

  I have successfully added nagiosgraph to our nagios installation. I also added a memory checker plugin, from here : http://blog.vergiss-blackjack.de/2010/04/nagios-plugin-to-check-memory-consumption/. However I can't seem to get the graph of this service to be output by nagiosgraph. The plugin returns a single line like this: 31% (3785 of 11903 MB) used so i added a rule like this to the map file: /output:(\d+)% \((\d+) of (\d+) MB\) used/ and push @s, ['Mem', ['Percentage', 'GUAGE', $1], ['Used', 'GUAGE', $2], ['Total', 'GUAGE', $3] ]; I have also read this : http://www.mail-archive.com/[email protected]/msg36835.html and made sure that process_performance_data=1 in the nagios conf file. So far I have no graph for the Mem service on any host, and no rrd file either. I am unsure how to proceed to get this working. The documentation is rather difficult to follow and I haven't managed yet to understand it enough to do this. Can anyone point me to a tutorial, or some documentation which explains the steps needed to get a service noticed and graphed by nagiosgraph?

  Read the article

• EngineX ignores Auth Basic?

  - by Miko

  I have configured nginx to password protect a directory using auth_basic. The password prompt comes up and the login works fine. However... if I refuse to type in my credentials, and instead hit escape multiple times in a row, the page will eventually load w/o CSS and images. In other words, continuously telling the login prompt to go away will at some point allow the page to load anyway. Is this an issue with nginx, or my configuration? Here is my virtual host: 31 server { 32 server_name sub.domain.com; 33 root /www/sub.domain.com/; 34 35 location / { 36 index index.php index.html; 37 root /www/sub.domain.com; 38 auth_basic "Restricted"; 39 auth_basic_user_file /www/auth/sub.domain.com; 40 error_page 404 = /www/404.php; 41 } 42 43 location ~ \.php$ { 44 include /usr/local/nginx/conf/fastcgi_params; 45 } 46 } My server runs CentOS + nginx + php-fpm + xcache + mysql

  Read the article

• How to access a port via OpenVpn only

  - by Andy M

  I've set up an openvpn server alongside an apache website that can only be accessed on port 8100 on the same machine. My /etc/openvpn/server.conf file looks like this: port 1194 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/server.crt key ./easy-rsa2/keys/server.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem # Diffie-Hellman parameter server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt # make sure clients can still connect to the internet push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 Now I tried to let only clients connected to the vpn network access the website on apache via port 8100. So I defined a few iptables rules: #!/bin/sh # My system IP/set ip address of server SERVER_IP="192.168.0.2" # Flushing all rules iptables -F iptables -X # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Allow incoming access to port 8100 from OpenVPN 10.8.0.1 iptables -A INPUT -i tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # outgoing http iptables -A OUTPUT -o tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT Now when I connect to the server from my client computer and try to access the website on 192.168.0.2:8100, my browser can't open it. Will I have to forward traffic from tun0 to eth0? Or is there anything else I'm missing?

  Read the article

• Protect all XML-RPC calls with HTTP basic auth but one

  - by bodom_lx

  I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

  Read the article

• Sharing a folder with Nautilus and NTFS external drive gets errors

  - by TheLQ

  I am trying to share a folder in Lubuntu over a network that's on an external NTFS drive. Due to the system that I have (rotating backup disks) this is probably the second time that the drive would of been mounted. Its manually mounted with a simple (for example) mount /dev/sdb1 /media/BACKUP On an internal NTFS disk I have successfully setup a network share and can access it. However on the external disk I can't from any other Windows computer. When setting up the share Nautilus said that it needs to change the other's permissions to allow for other users to write. However afterwords its still blank. Changing it to Read and Write just changes back to blank. Chowning the entire /media folder recursively and trying didn't work. Running PCManFM as root and changing didn't work. Adding "public=yes" to smb.conf and restarting didn't work. I'm out of idea's on what to do. What's weird is that it worked just fine on an internal NTFS disk, so why not the external one? Any solutions need to be able to managed inside of a gui (preferably Nautilus) as the person managing the machine isn't as tech savvy. Thanks

  Read the article

• Setting up self signed cert and CA [plesk / linux]

  - by microchasm

  I'm about ready to give up and do a clean wipe of this machine and start over with ISPConfig or some other variant. I installed Plesk on this machine to help with some of the handiwork. It is the free version (single domain); I don't need it for much. It's nice, though, to use to set up db's email, etc. Anyway, I would like to set it up as a CA (which I can add to users' trusted root servers to alleviate those warnings). It seems like Plesk does all it can to obfuscate where things are. Despite trying to find the conf files, and crt/pem/key etc. I am (5 hours later) now left with a machine that won't even get to the ssl page. The browser will sit there, until a 'connection reset' error comes up. In error_log, I get messages saying CN doesn't match server name -- which it does. ssl_error_log: [Thu May 13 16:02:14 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Thu May 13 16:12:19 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) not very helpful. If anyone has any experience, and/or recommendations (including other software), I'd be much obliged. NB RHEL5; 1 domain, 3 subdomains; everything local only. Thanks.

  Read the article

• Packets being dropped by iptables

  - by Shadyabhi

  I am trying to create a Software Access Point in linux. I followed the blog here. Steps I performed: Started dhcp server on wlan0. Properly configured hostapd.conf Enabled packet forwarding & masquerading. Two commands executed regarding iptables: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface wlan0 -j ACCEPT I enabled logging on iptables & I get this in everything.log Jun 29 19:42:03 MBP-archlinux kernel: [10480.180356] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=38025 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK URGP=0 Jun 29 19:42:03 MBP-archlinux kernel: [10480.389102] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=308 TOS=0x00 PREC=0x00 TTL=52 ID=14732 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK PSH URGP=0 Jun 29 19:42:03 MBP-archlinux kernel: [10480.389710] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=14988 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK FIN URGP=0 Jun 29 19:42:03 MBP-archlinux kernel: [10480.621118] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=63378 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK FIN URGP=0 I have almost no knowledge of iptables, all I did was through googling. So, can anyone help me in making me understand what wrong is happening here? I have tried running tcpdump on wlan0 & http packets are being sent from wlan0.

  Read the article

• Building PHP For MacOS

  - by Eray

  I was using XAMPP and decided to uninstall it and use MacOS' in-built apache and php modules. But while uninstalling XAMPP I deleted /usr/bin/php files and other PHP-CLI files accidentally. And I decided to install newest version of PHP (5.5.12) instead of rebuilding current version (5.4.24). Downloaded it and unzip. After this executed this command as mentioned at this guide. ./configure '--with-apxs2=/usr/sbin/apxs' '--enable-cli' '--with-config-file-path=/etc' '--with-zlib=/usr' '--enable-bcmath' '--with-bz2=/usr' '--enable-calendar' '--disable-cgi' '--with-curl=/usr' '--enable-dba' '--enable-ndbm=/usr' '--enable-exif' '--enable-fpm' '--enable-ftp' '--with-gd' '--enable-gd-native-ttf' '--enable-mbregex' '--with-mysql=mysqlnd' '--with-mysqli=mysqlnd' '--with-pear' '--with-pdo-mysql=mysqlnd' '--with-mysql-sock=/var/mysql/mysql.sock' '--with-tidy' '--enable-wddx' '--with-xmlrpc' '--enable-zip' make make install When i check phpinfo() , it's still version 5.4.24 . This line from my httpd.conf LoadModule php5_module libexec/apache2/libphp5.so /usr/libexec/apache2/libphp5.so coming from old version and i couldn't ind libphp5.so for new version. There is no libphp5.so file inside modules dir. How can i use new PHP build with Apache ? UPDATE Results of php -v command . PHP 5.5.12 (cli) (built: May 27 2014 05:17:21) Copyright (c) 1997-2014 The PHP GroupZend Engine v2.5.0, Copyright (c) 1998-2014 Zend Technologies

  Read the article

• I've just set up FreeBSD 8.0 and can't login with ssh

  - by Matt

  /etc/hosts.allow is set to allow any protocol from anywhere. I can "ssh localhost" and it works. I simply get "connection refused" from putty on another machine. Any ideas? Will try to get a copy of the sshd_server.conf file as soon as I can find a flash disk to copy it to, but I thought someone might know what you need to set initially to permit login. EDIT: I think I can see why it's not working now. If I telnet to the IP address of the server I'm seeing MGE UPS SYSTEMS SNMP Web/Agent configuration menu. Enter Password: Doh. Ok, so the IP address is assigned by DHCP, but it seems there is already a device statically assigned to that address. I'll put in a reservation and try again. ok, sorted now. It was an ip address conflict. Windows DHCP isn't smart enough to check if there is something listening on the address before first assigning it.

  Read the article

• Debian x86_64 + Nginx + PHP5-FPM optimization

  - by Olal'a

  I used to have a VPS (512MB) from Linode and I was running nginx + php5-fpm (which comes with php5.3.3) on Debian Lenny (i686). The total memory usage was about 90-100MB. Now I have another VPS (different hosting company) and I also run nginx + php5-fpm on Debian Lenny (x86_64). The system is 64-bit, so the memory usage is higher now, about 210-230MB, which I think is too much. Here is my php5-fpm.conf: pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 300 That's what top command tells me: top - 15:36:58 up 3 days, 16:05, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 469628k used, 62660k free, 28760k buffers Swap: 1048568k total, 408k used, 1048160k free, 210060k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22806 www-data 20 0 178m 67m 31m S 1 13.1 0:05.02 php5-fpm 8980 mysql 20 0 241m 55m 7384 S 0 10.6 2:42.42 mysqld 22807 www-data 20 0 162m 43m 22m S 0 8.3 0:04.84 php5-fpm 22808 www-data 20 0 160m 41m 23m S 0 8.0 0:04.68 php5-fpm 25102 www-data 20 0 151m 30m 21m S 0 5.9 0:00.80 php5-fpm 10849 root 20 0 44100 8352 1808 S 0 1.6 0:03.16 munin-node 22805 root 20 0 145m 4712 1472 S 0 0.9 0:00.16 php5-fpm 21859 root 20 0 66168 3248 2540 S 1 0.6 0:00.02 sshd 21863 root 20 0 66028 3188 2548 S 0 0.6 0:00.06 sshd 3956 www-data 20 0 31756 3052 928 S 0 0.6 0:06.42 nginx 3954 www-data 20 0 31712 3036 928 S 0 0.6 0:06.74 nginx 3951 www-data 20 0 31712 3008 928 S 0 0.6 0:06.42 nginx 3957 www-data 20 0 31688 2992 928 S 0 0.6 0:06.56 nginx 3950 www-data 20 0 31676 2980 928 S 0 0.6 0:06.72 nginx 3955 www-data 20 0 31552 2896 928 S 0 0.5 0:06.56 nginx 3953 www-data 20 0 31552 2888 928 S 0 0.5 0:06.42 nginx 3952 www-data 20 0 31544 2880 928 S 0 0.5 0:06.60 nginx So, the question is there any way to use less memory? Btw, I have 16 cores and it would be nice to make use of them...

  Read the article

• MongoDB data directory transfer and upgrade

  - by KPL

  I just transferred my data directory (of Mongo 1.6.5) to a new server and installed Mongo 2.0 on it. I set the data directory path and did sudo server mongod restart. It failed, and the log file output says this - ***** SERVER RESTARTED ***** Sun Oct 9 07:51:47 [initandlisten] MongoDB starting : pid=8224 port=27017 dbpath=/database/mongodb 64-bit host=domU-12-31-39-09-35-81 Sun Oct 9 07:51:47 [initandlisten] db version v2.0.0, pdfile version 4.5 Sun Oct 9 07:51:47 [initandlisten] git version: 695c67dff0ffc361b8568a13366f027caa406222 Sun Oct 9 07:51:47 [initandlisten] build info: Linux bs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 20 17:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41 Sun Oct 9 07:51:47 [initandlisten] options: { auth: "true", config: "/etc/mongod.conf", dbpath: "/database/mongodb", fork: "true", logappend: "true", logpath: "/var/log/mongo/mongod.log", nojournal: "true" } Sun Oct 9 07:51:47 [initandlisten] couldn't open /database/mongodb/local.ns errno:1 Operation not permitted Sun Oct 9 07:51:47 [initandlisten] error couldn't open file /database/mongodb/local.ns terminating Sun Oct 9 07:51:47 dbexit: Sun Oct 9 07:51:47 [initandlisten] shutdown: going to close listening sockets... Sun Oct 9 07:51:47 [initandlisten] shutdown: going to flush diaglog... Sun Oct 9 07:51:47 [initandlisten] shutdown: going to close sockets... Sun Oct 9 07:51:47 [initandlisten] shutdown: waiting for fs preallocator... Sun Oct 9 07:51:47 [initandlisten] shutdown: closing all files... Sun Oct 9 07:51:47 [initandlisten] closeAllFiles() finished Sun Oct 9 07:51:47 [initandlisten] shutdown: removing fs lock... Sun Oct 9 07:51:47 dbexit: really exiting now I have already run it with --upgrade once.

  Read the article

• BIND zones and named files

  - by preethika

  I've installed BIND in my Windows server2003. i've configured the named file in C:\named\etc\named.conf as: options { directory "c:\named\zones"; allow-transfer { none; }; recursion no; }; zone "tisdns.com" IN { type master; file "db.tisdns.com.txt"; allow-transfer { none; }; }; My zone file is configured in C:\named\zones\db.tisdns.com.txt as: $TTL 6h @ IN SOA ns1.tisdns.com. hostmaster.tisdns.co… ( 2010010901 10800 3600 604800 86400 ) @ NS ns1.tisdns.com. ns1 IN A 192.168.0.17 mug IN A 192.168.0.103 key "rndc-key" { algorithm hmac-md5; secret "M0oW24WFQZhMu9wTq8qepw=="; }; controls { inet 127.0.0.1 port 53 allow { 127.0.0.1; } keys { "rndc-key"; }; }; In the above i've given the name to the domain as "tisdns". i want to create a new domain name in a different zone file. how can i create it?

  Read the article

• squid bypass for a domain

  - by krisdigitx

  i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

  Read the article

• Changing open-files-limit in mysql 5.5

  - by davidv

  I'm having an issue with mysql 5.5 running on Ubuntu 12.04 with the open-files-limit parameter. I recently noticed some problems due to the 1024 limit, and actually the main system limit was set to 1024, so I modified /etc/security/limits.conf with the following: * soft nofile 32000 * hard nofile 32000 root soft nofile 32000 root hard nofile 32000 After that I check the ulimit value for root and even for mysql user, both returned the new value: 32000, so I assume the change has already been done. I also changed the value at the my.cnf file, setting open-files-limit to 24000, like this: open-files-limit = 24000 Now comes the odd part, when I restart the mysql service and check the open_files_limit variable, it returns that it's still set to 1024, so I'm having the same problems that before (obviously), I tried to use open-files-limit instead open_files_limit in the my.cnf config file, same result, BUT if I override the service command to start the service and start only using mysqld (no additional parameters), the service starts and when I check the parameter it returns 32000... I don't know where it's taking that value from, as it's not set at my.cnf and it's not being given through command line, at least, not for myself. Any ideas about why it's not working the change and how to solve it the normal way (launching it through service...)?

  Read the article

• Nginx/puma rhel unix socket permission error?

  - by Kevin Brown

  When I try to start my puma server, I get the error: /.rvm/gems/ruby-2.1.1/gems/puma-2.9.0/lib/puma/binder.rb:275:in `initialize': Permission denied - connect(2) for "/var/run/nvhbase.sock" (Errno::EACCES) My sites-available/nvhbase.conf file: upstream nvhbase { server unix:/var/run/nvhbase.sock; } server { listen 80 default_server; server_name 207.131.132.219; root /home/vf032500/dev/nvh/public; location / { proxy_pass http://unix:/var/run/nvhbase.sock; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } I don't know a lot about unix sockets and everything works fine using tcp/puma default. My rails app is in my user directory. Is that the problem?? socket is starting in /var/run--I can start in /tmp, but I've heard that's bad practice? Provided I start the server in /tmp, I then can't access it via the server's ip--then what? I'm happy to provide any needed info, I just don't know a whole lot about server/nginx/puma.

  Read the article

• Server Recovery from Denial of Service

  - by JMC

  I'm looking at a server that might be misconfigured to handle Denial of Service. The database was knocked offline after the attack, and was unable to restart itself after it failed to restart when the attack subsided. Details of the Attack: The Attacker either intentionally or unintentionally sent 1000's of search queries using the applications search query url within a couple of seconds. It looks like the server was overwhelmed and it caused the database to log this message: Server Specs: 1.5GB of dedicated memory Are there any obvious mis-configurations here that I'm missing? **mysql.log** 121118 20:28:54 mysqld_safe Number of processes running now: 0 121118 20:28:54 mysqld_safe mysqld restarted 121118 20:28:55 [Warning] option 'slow_query_log': boolean value '/var/log/mysqld.slow.log' wasn't recognized. Set to OFF. 121118 20:28:55 [Note] Plugin 'FEDERATED' is disabled. 121118 20:28:55 InnoDB: The InnoDB memory heap is disabled 121118 20:28:55 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121118 20:28:55 InnoDB: Compressed tables use zlib 1.2.3 121118 20:28:55 InnoDB: Using Linux native AIO 121118 20:28:55 InnoDB: Initializing buffer pool, size = 512.0M InnoDB: mmap(549453824 bytes) failed; errno 12 121118 20:28:55 InnoDB: Completed initialization of buffer pool 121118 20:28:55 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121118 20:28:55 [ERROR] Plugin 'InnoDB' init function returned error. 121118 20:28:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121118 20:28:55 [ERROR] Unknown/unsupported storage engine: InnoDB 121118 20:28:55 [ERROR] Aborting **ulimit -a** core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 13089 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited **httpd.conf** StartServers 10 MinSpareServers 8 MaxSpareServers 12 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 **my.cnf** innodb_buffer_pool_size=512M # Increase Innodb Thread Concurrency = 2 * [numberofCPUs] + 2 innodb_thread_concurrency=4 # Set Table Cache table_cache=512 # Set Query Cache_Size query_cache_size=64M query_cache_limit=2M # A sort buffer is used for optimizing sorting sort_buffer_size=8M # Log slow queries slow_query_log=/var/log/mysqld.slow.log long_query_time=2 #performance_tweak join_buffer_size=2M **php.ini** memory_limit = 128M post_max_size = 8M

  Read the article

• bind would not work unless allow-query is "any"

  - by adrianTNT

  I have this in /etc/named.conf, I commented the default values and set my own under it. My domain would not load in browser unless I set allow-query to "any", is this OK, what should I edit? If is localhost or 127.0.0.1; 10.0.1.0/24; domain would not load. I tried the 127.. thing because it mentioned it here: http://wiki.mandriva.com/en/Testing:Bind Bind version is 9.7.0-P2-RedHat-9.7.0-5.P2.el6_0.1 OS is CentOS 6.0. options { // listen-on port 53 { 127.0.0.1; }; listen-on port 53 { any; }; //listen-on-v6 port 53 { ::1; }; listen-on-v6 port 53 { any; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; //allow-query { localhost; }; allow-query { any; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; };

  Read the article

• Keytool and SSL Apache config

  - by Safari

  I have a question about SSL certificate... I have generate a certificate using this keytool command.. keytool -genkey -alias myalias -keyalg RSA -keysize 2048 and I used this command to export the certificate keytool -export -alias myalias -file certificate.crt So, I have a file .crt Now I would to configure my Apache ssl module. I need to use keytool...At the moment I can't to use Openssl How can I configure the module if I have only this certificate.crt file? I see these sections in my ssl.conf # Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If # the certificate is encrypted, then you will be prompted for a # pass phrase. Note that a kill -HUP will prompt again. A new # certificate can be generated using the genkey(1) command. #SSLCertificateFile /etc/pki/tls/certs/localhost.crt # Server Private Key: # If the key is not combined with the certificate, use this # directive to point at the key file. Keep in mind that if # you've both a RSA and a DSA private key you can configure # both in parallel (to also allow the use of DSA ciphers, etc.) #SSLCertificateKeyFile /etc/pki/tls/private/localhost.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt How can I configure the correct section?

  Read the article

• Flash drive suddenly died. Why? Can I recover it?

  - by mg

  Hi, I have a flash drive that I used not too much but, after few month of inactivity, it died. I know that flash drives have a limited write cycles but I am sure that this is not the problem. I tried to create a new partition table and format the drive nothing worked. This is the output of mkfs.ext2. marco@pinguina:~$ sudo LANG=en.UTF-8 mkfs.ext2 -v -c /dev/sdc1 [sudo] password for marco: mke2fs 1.41.11 (14-Mar-2010) fs_types for mke2fs.conf resolution: 'ext2', 'default' Calling BLKDISCARD from 0 to 4001431552 failed. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 244320 inodes, 976912 blocks 48845 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=1002438656 30 block groups 32768 blocks per group, 32768 fragments per group 8144 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Running command: badblocks -b 4096 -X -s /dev/sdc1 976911 badblocks: Input/output error during ext2fs_sync_device Checking for bad blocks (read-only test): done Block 0 in primary superblock/group descriptor area bad. Blocks 0 through 2 must be good in order to build a filesystem. Aborting.... Is there something I can do to recover it?

  Read the article

• Anonymous FTP upload on CentOS 5.2

  - by Craig

  I need to allow users to upload files to an FTP server anonymously. They should not be able to see any other files, or download files. It is a CentOS 5.2 server. I have a separate partition for the the upload area (mounted at /ftp). I have tried to set up vsftpd, followed all the instructions/advice I could find. But, when a user logs in and tries to transfer a file it throws a "553 could not create file." error. If I do a 'pwd' it shows the directory as "/" rather than the anon_root of "/ftp/anonymous". Any attempt to change the remote directory ends with "550 Failed to change directory.". I have a subdirectory "/ftp/anonymous/incoming" that is writable for the uploads SELinux is in permissive mode. I am running version 2.0.5 release 16.el5 of vsftpd. Here is the vsftpd.conf file: anonymous_enable=YES local_enable=YES write_enable=YES local_umask=002 anon_umask=007 file_open_mode=0666 anon_upload_enable=YES anon_mkdir_write_enable=NO dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=inftpadm xferlog_std_format=YES nopriv_user=nobody listen=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES ftp_username=inftpadm anon_root=/ftp/anonymous anon_other_write_enable=NO anon_mkdir_write_enable=NO anon_world_readable_only=NO dirlist_enable=YES Can anyone help?

  Read the article

• Apache runs in console but not as a service?

  - by danspants

  I have an apache 2.2 server running Django. We have a network drive T: which we need constant access to within our Django app. When running Apache as a service, we cannot access this drive, as far as any django code is concerned the drive does not exist. If I add... <Directory "t:/"> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> to the httpd.conf file the service no longer runs, but I can start apache as a console and it works fine, Django can find the network drive and all is well. Why is there a difference between the console and the service? Should there be a difference? I have the service using my own log on so in theory it should have the same access as I do. I'm keen to keep it running as a service as it's far less obtrusive when I'm working on the server (unless there's a way to hide the console?). Any help would be most appreciated.

  Read the article

• PHP 5.3.2 Upgrade on Windows

  - by mcondiff

  I have a development box running Windows XP, Apache 2.2.15 Mysql and PHP 5.2.6 About a month ago I updated the Apache to the latest version and it went swimmingly. I am not having the same success with upgrading PHP to the latest version. I backed up my PHP directory and then deleted it. Used the Windows Installer for PHP 5.3.2, installed as an Apache 2.2.X module. I can get "Hello World" and phpinfo() to come up but cannot get mysql to connect. I have the extension un-commented in the php.ini and shouldn't really have to touch the Apache httpd.conf file since I didn't change the directory of PHP. Not sure what I'm doing wrong here. I have to get this right and then upgrade the Live Server too so I want to get this down pat. I've tried to use installation guides on the web with no luck. Any info pertaining to this problem would be great. I'm also afraid that the other PHP modules may not load but cannot really tell anything past mysql not working.

  Read the article

• Synergy: Cannot send media keys from Linux to Mac

  - by CraftyThumber

  I have a Linux Synergy server (Si-Linux) serving just one Mac client (Macbook Pro UK) (SiBook-Pro.local). On my Linux server I am using a USB Apple keyboard with the exact layout of the laptops keyboard (the compact UK aluminium keyboard). I would like to send the media keys to the Mac client at all times and I have attempted the following in my synergy.conf: keystroke(AudioPlay) = keystroke(AudioPlay,SiBook-Pro.local) This did not seem to work so I ran both the server and client as foreground processes and with debugging enabled and observed the following: Server Log: DEBUG1: activate actions DEBUG1: hotkey: keyDown(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyDown id=57523 mask=0x0000 button=0x0000 DEBUG1: send key down to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 DEBUG1: deactivate actions DEBUG1: hotkey: keyUp(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyUp id=57523 mask=0x0000 button=0x0000 DEBUG1: send key up to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 Client Log: DEBUG1: recv key down id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: mapKey e0b3 (57523) with mask 0000, start state: 0000 DEBUG1: key e0b3 is not on keyboard DEBUG1: recv key up id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: recv enter, 1279,386 5 2000 As you can see, the client claims the key received is not on keyboard. I don't understand since it is the same key as is on the Macbook's keyboard. I tried to reverse the client-server config to see if I could capture the key being sent if I pressed the Play button on the Macbook but the key doesn't seem to even make it to Synergy. Almost all keyboard presses get logged but the media keys seem to bypass the logs and just execute their function locally. E.g. I press play on the Macbook (with the Macbook as the server) and the key plays music on the Macbook and the key is not logged to the debug log.

  Read the article

• Vlaning on WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off. I've also discovered that when wpa2 is switched on I don't receive a association reply from ap. thats my hostapd.conf interface=eth1 driver=broadcom bridge=br-lan ssid=O2BB3 wpa=2 wpa_passphrase=prettywoman wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP Btw that password is only temporary while am testing.

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >