Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 190/468 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• Macbook not connecting to WIFI

  - by Model Reject

  I have been having this problem all week. My Macbook aluminium can't see my wifi network. I have changed the channel to one that isn't being used by neighbours and my iphone picks it up straight away. In other words, the router is fine. It's just the macbook can't see it. This is driving me nuts if anyone can help... My airport card details... Card Type: AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1) Locale: ETSI Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Wake On Wireless: Supported The funny thing is that is was intermitent on Saturday. I had to keep restarting router and it worked for about 5 minutes, now it doesn't connect or see it at all. Tried using kisMAC and it can't see network either. Thanks, C

  Read the article

• Unable to browse one server unless using FQDN all others work.

  - by Reg

  Hello - I installed 4 new Windows 2008 R2 Servers. All are joined to the domain. One out of the four will not browse to our DC without using a FQDN. I can ping the DC server and see it in Network neighborhood but when I click on it I get Windows cannot access \SERVER. BUT accessing it by using \server.domain works fine. It is only having problems with the one DC server. Able to browse every other server with UNC without using FQDN.This is the only machine on our domain that is experiencing the problem and have tried different user accounts.

  Read the article

• WIndows Hosted Network

  - by Nandakumar V

  I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

  Read the article

• Stopped windows firewall service during ICS, how is this possible?

  - by insipid

  Although windows firewall is required to be on when you "start" Internet Connection Sharing, you can stop the WF service with MMC. When done a client can still use the host machines internet. The firewall had port 80/http blocked, and now it is open for incoming traffic. However other ports used by applications on the host and client which communicate with each other still seem to be blocked. Can anybody explain what might be happening here? Doesn't ICS need windows firewall for NAT? Note: I am not actually seeing anything in the firewall logs after stopping the service, but even packets sent localhost on the host machine never arriving on these other random ports.

  Read the article

• Chrome Residual Redirect to Login Page

  - by Shadow503

  My college redirects people in the dorms to a login page when using an ethernet (or wifi) connection. I am now at home, and certain domains keep redirecting to this login page. I've tried running ipconfig /flushdns and I flushed the chrome's local dns cache as described here: How to clear/flush the DNS cache in Google Chrome?. Interestingly enough, while http://www.reddit.com redirects to the login page, http://www.reddit.com/r/funny works. Firefox works fine for both urls. Is there a way to fix this without deleting all of my cookies? Thanks!

  Read the article

• How to find wireless network mode in windows 7

  - by pdeva

  I want to know if my wireless mode is of type b or g on windows 7. How do I find out?

  Read the article

• Conflicts between 2 NICs

  - by funbi_grace

  Hi, I have an HP server (Windows server 2003) with 2 external NICs (couldn't get the builtin NIC to work). One is for an internal network of 4 PCs and the other is for part of an Internet-facing network. Many times a day, we have to disable the internal NIC in order to get the other NIC to see the network. I know this is happening on a server, but the issue is more related to the conflicts on the NICs. Any suggestions from the community on where to look for a solution?

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• Can I use an apple airport express as a wired bridge?

  - by Chris

  I have a wireless network using an Apple Airport extreme. That device is set up in my office and hooked up to the cable modem. I have a TV in another room which can accept a wired internet connection (not wireless enabled). Can I use an Apple airport express's ethernet jack to create a wireless to wired bridge? If not what device would I use to do the same thing?

  Read the article

• "merging" multiple internet connections

  - by Spencer R

  I've seen this question asked several times here on SF, but I'm looking for some updated information; specifically concerning Server 2012. I'm in the process of buying a home so I'm trying to get some plans together on how I want to structure my network. Internet speeds aren't the greatest and connections can be unreliable where the house is so I was thinking of having two DSL lines installed. My question is, how could I leverage those two connections to create the best network I can, in terms of speed and reliability. My parents will be moving in with me - they consume a lot of bandwidth as it is, but then add my internet traffic to it, and I'm headed for a lot of frustration. I thought I remember reading somewhere that Server 2012 has some new functionality to utilize multiple connections on multiple NICs in a way that wasn't possible in earlier versions of Server. Not sure if Windows will work but, I'm an application developer and spend the majority of my time in Windows environments. However, I've only recently returned to the Windows world, so I'd like my main server at home to run Win Server 2012 so that I can become more familiar with it.

  Read the article

• MySQL performance over a (local) network much slower than I would expect

  - by user15241

  MySQL queries in my production environment are taking much longer than I would expect them too. The site in question is a fairly large Drupal site, with many modules installed. The webserver (Nginx) and database server (mysql) are hosted on separated machines, connected by a 100mbps LAN connection (hosted by Rackspace). I have the exact same site running on my laptop for development. Obviously, on my laptop, the webserver and database server are on the same box. Here are the results of my database query times: Production: Executed 291 queries in 320.33 milliseconds. (homepage) Executed 517 queries in 999.81 milliseconds. (content page) Development: Executed 316 queries in 46.28 milliseconds. (homepage) Executed 586 queries in 79.09 milliseconds. (content page) As can clearly be seen from these results, the time involved with querying the MySQL database is much shorter on my laptop, where the MySQL server is running on the same database as the web server. Why is this?! One factor must be the network latency. On average, a round trip from from the webserver to the database server takes 0.16ms (shown by ping). That must be added to every singe MySQL query. So, taking the content page example above, where there are 517 queries executed. Network latency alone will add 82ms to the total query time. However, that doesn't account for the difference I am seeing (79ms on my laptop vs 999ms on the production boxes). What other factors should I be looking at? I had thought about upgrading the NIC to a gigabit connection, but clearly there is something else involved. I have run the MySQL performance tuning script from http://www.day32.com/MySQL/ and it tells me that my database server is configured well (better than my laptop apparently). The only problem reported is "Of 4394 temp tables, 48% were created on disk". This is true in both environments and in the production environment I have even tried increasing max_heap_table_size and Current tmp_table_size to 1GB, with no change (I think this is because I have some BLOB and TEXT columns).

  Read the article

• Samba+Windows: Allow multiple connections by different users?

  - by rgoytacaz

  Hello there, I have a machine running Ubuntu with Samba that I use to share stuff with my family's Windows machines in our local network. Currently they access a share for movies/music/etc with one user. I want to connect them to another share as a different user (for example, user "goytacaz"). When I try connecting to this new share, Windows gives me "Error 1219" and complains about multiple connections by the same user. How do I get my machine to accept multiple connections by the same user?

  Read the article

• Suggestions for transitioning to new GW/private network

  - by Quinten

  I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

  Read the article

• Wireless option grayed out in Windows Mobility Center

  - by thomasvdb

  We currently have a Lenovo ThinkPad L512 which can't connect to wireless networks. He simply indicates he can't find any networks. Other notebooks (also ThinkPad L512-notebooks) in the company do find the network so nothings wrong with the configuration of the wireless router. As indicated on answer.microsoft.com, I should check Windows Mobility Center and enable the entry "Turn Wireless On". Unfortunately this option has been grayed out. How can I enable this option? There isn't a physical switch on the laptop to turn on the wireless.

  Read the article

• How iptables behaves on timezone change?

  - by pradipta

  I have doubt how iptables keep changing the info in iptables when timezone is change. I am using iptables s v 1.4.8 I have blocked one IP with following details # date Thu Jun 6 12:46:42 IST 2013 #iptables -A INPUT -s 10.0.3.128 -m time --datestart 2013-6-6T12:0:00 --datestop 2013-6-6T13:0:00 -j DROP # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP all -- 10.0.3.128 anywhere TIME starting from 2013-06-06 12:00:00 until date 2013-06-06 13:00:00 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination But after I change the timezone following things happened automatically . AFTER TIME ZONE CHANGE +++++++++++++++++++++++ #date Thu Jun 6 15:17:48 HKT 2013 # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP all -- 10.0.3.128 anywhere TIME starting from 2013-06-06 14:30:00 until date 2013-06-06 15:30:00 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # The time value is changed in the rule . It is changing with the timezone how. Where iptables keeps track of timezone. Kindly explain me.

  Read the article

• one of my web hostings is down - only for me - why ?

  - by Thomas Traub

  My first post here, I am reading / learning a lot, thanks ;). I've got a mysterious issue (for me) and would really appreciate to get it solved. I've rent a reseller package with bibihost.com and it's now the second time that all my domaines the hoster's site are unavailable from my connection (my Mac and my iPhone), (in browser, per FTP, ping, ab, and traceroute) This has never before happened to me with other web addresses. traceroute get's always stuck at a specific server 40g.vss-1-6k.routers.chtix.eu (91.121.131.29) The sites are all up for everyone else, I've checked with downforeveryoneorjustme.com, a homegrown script loaded to another server and montastic.com My question(s) : Why am I blocked ? Is there anything I can do about it ? If I cannot solve this issue I have to change the hoster, but I really would like to know what's going on. my domaines on this server : tienstiens.fr tomlegrand.com

  Read the article

• curl makes a site work externally once run locally (apache)

  - by Kyle_at_NU

  Currently when I visit mysite.mydomain.com external to the local network I get in the browser: This is the default web page for this server. Nothing to see here. This is not even the "It Work's" Apache page. Then if locally (Apache2 on Ubuntu Server 12.04 with curl installed ) type: curl mysite.mydomain.com I get the site I expect. Then the next time i visit the page externally I get the correct site. Has anyone seen this before? Tips/Suggestions?

  Read the article

• How do I justify to my management that we need a bandwidth upgrade?

  - by Sandeep

  I work in an office with a 8mbps line and about a 100 people. Our internet has slowed to crawl over the past few months, as we added headcount. However, using speedtest.net or other sites, still shows bandwidth as 8mbps. Now, how do I justify to management that we indeed need to upgrade our bandwidth ? Please note that I dont have access to our main routers or any network equipment. I can only use my system (windows+linux dual boot) to make a case for a reasonable justification. help!

  Read the article

• Zune HD won't wirelessly sync with my laptop

  - by Keith

  I've got a zune hd and I am having trouble getting it to sync with my laptop. I have gone through the procedures listed on their webpage (http://www.zune.net/en-us/support/usersguide/musicvideospictures/troubleshootwireless.htm) but still can't get it to work. Any ideas?

  Read the article

• Service redirection on same network

  - by Unode

  I have a network on which I run multiple servers each dedicated to a given service. Because most services run on distinct ports I'm currently looking for a way of unifying "all" services into a single "proxy" machine. The idea is to abstract which machine is being accessed but still allow direct connection if needed/requested. This "proxy" machine has only one network interface which is part of the same network as all the other service providing machines. I've looked into Routing and NAT but I've so far failed to figure out how to make it work. I tried to achieve this using shorewall but couldn't find clear examples. However I'm not entirely sure this is the best/simplest strategy. With that said, what would be the best way of achieving this result? Example case: Proxy IP - Listening port - Send requests to 192.168.0.50 80 192.168.0.1:80 " 22 192.168.0.2:2222 " 3306 192.168.0.3:3000 " 5432 192.168.0.4:5432 " 5222 192.168.0.5:5222 PS: I'm not concerned with the single-point-of-failure nature of the proxy. Thanks

  Read the article

• Run command on init and restart on errors

  - by chersanya

  I have internet access on my PC through proxy through SSH, so every time I need to execute ssh -L PORT:SERVER:PORT LOGIN@SERVER and then type a password. After each network failure or reconnect this command has to be executed again. I've got bored of it and look for a way to do this automatically: first run this after boot (it doesn't seem to be a problem - put this command in some init file and that's all) and then rerun it (if possible, then type password) on each network failure. Is it possible, and how? OS Linux (Debian)

  Read the article

• Is there Muticast routing support on a Cisco 3750?

  - by mrtechalot

  We have a switch (Cisco WS-C3750G-48TS) with only a C3750-IPBASE-M image (not a 'C3750-IPSERVICES-M' license). Is there any kind of multicast support here? All I need it to do is route multicast packets to an RP (ip pim sparse-mode). Do we really need the service (C3750-IPSERVICES-M) license/image?. The uplink switch is running C3750-IPSERVICES-M, but this switch doesn't seem to carry any ability to configure multicast on an interface.

  Read the article

• How can I monitor network usage by process on Mac OS X?

  - by psmith

  Is there any way to find out which process using how much internet bandwidth on Mac OS X Lion? I'm on mobile internet now, which is not very fast, so it would be nice if I can tell that for example, Chrome using 10kB/s, and Skype using 2kB/s. I can see the total amount of traffic in Activity Monitor, but it is not enough for me. I'd like to use an existing application, not interested to write an app like this. And I'm not interested in the actual traffic, only the number of bytes transferred and received by each processes.

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >