Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 192/468 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Is there a way to detect which port on an ethernet switch a device is connected to?

  - by banno

  Since the wall jack is typically always connected to the same port on the switch I would like to be able to know which device is connected at a specific location. In my case I am talking about printers. I have code to go out on the network and find the IP Address of all of my printers, but would like to be able to update a server based on a printer being swapped out of a location for maintenance or repair. Is there a method for determining a port connection?

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• Macbook not connecting to WIFI

  - by Model Reject

  I have been having this problem all week. My Macbook aluminium can't see my wifi network. I have changed the channel to one that isn't being used by neighbours and my iphone picks it up straight away. In other words, the router is fine. It's just the macbook can't see it. This is driving me nuts if anyone can help... My airport card details... Card Type: AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1) Locale: ETSI Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Wake On Wireless: Supported The funny thing is that is was intermitent on Saturday. I had to keep restarting router and it worked for about 5 minutes, now it doesn't connect or see it at all. Tried using kisMAC and it can't see network either. Thanks, C

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• How long would this file transfer take?

  - by CT

  I have 12 hours to backup 2 TB of data. I would like to backup to a network share to a computer using consumer WD 2TB Black 7200rpm hard drives. Gigabit Ethernet. What other variables would I need to consider to see if this is feasible? How would I set up this calculation?

  Read the article

• Can i connect my modem's ethernet and usb slot to two computers simultaneously??

  - by Rajasekar

  I have NETGEAR BROADBAND MODEM. I had a desktop and laptop. I had connected internet to dekstop by using Ehternet slot on my modem to my ethernet slot on my Desktop. I need internet connection on my Laptop too. There is another slot in modem which can be connect using USB cable. Whether i can connect the laptop with that USB slot in my modem and use both the computer's internet? whether it will work??

  Read the article

• Asterisk server firewall script allows 2-way audio from incoming calls, but not on outgoing?

  - by cappie

  I'm running an Asterisk PBX on a virtual machine directly connected to the Internet and I really want to prevent script kiddies, l33t h4x0rz and actual hackers access to my server. The basic way I protect my calling-bill now is by using 32 character passwords, but I would much rather have a way to protect The firewall script I'm currently using is stated below, however, without the established connection firewall rule (mentioned rule #1), I cannot receive incoming audio from the target during outgoing calls: #!/bin/bash # first, clean up! iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD DROP # we're not a router iptables -P OUTPUT ACCEPT # don't allow invalid connections iptables -A INPUT -m state --state INVALID -j DROP # always allow connections that are already set up (MENTIONED RULE #1) iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # always accept ICMP iptables -A INPUT -p icmp -j ACCEPT # always accept traffic on these ports #iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT # always allow DNS traffic iptables -A INPUT -p udp --sport 53 -j ACCEPT iptables -A OUTPUT -p udp --dport 53 -j ACCEPT # allow return traffic to the PBX iptables -A INPUT -p udp -m udp --dport 50000:65536 -j ACCEPT iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT iptables -A INPUT -p udp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -p tcp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -m multiport -p udp --dports 10000:20000 iptables -A INPUT -m multiport -p tcp --dports 10000:20000 # IP addresses of the office iptables -A INPUT -s 95.XXX.XXX.XXX/32 -j ACCEPT # accept everything from the trunk IP's iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT # accept everything on localhost iptables -A INPUT -i lo -j ACCEPT # accept all outgoing traffic iptables -A OUTPUT -j ACCEPT # DROP everything else #iptables -A INPUT -j DROP I would like to know what firewall rule I'm missing for this all to work.. There is so little documentation on which ports (incoming and outgoing) asterisk actually needs.. (return ports included). Are there any firewall/iptables specialists here that see major problems with this firewall script? It's so frustrating not being able to find a simple firewall solution that enabled me to have a PBX running somewhere on the Internet which is firewalled in such a way that it can ONLY allows connections from and to the office, the DNS servers and the trunk(s) (and only support SSH (port 22) and ICMP traffic for the outside world). Hopefully, using this question, we can solve this problem once and for all.

  Read the article

• How to forward traffic using iptables rules?

  - by ProbablePattern

  I am new to iptables and I have been doing Google searches for a few days now without finding a good solution to this problem. I have computer A with a public ip address (say 192.0.2.1) that can access the Internet unrestricted. I have another computer B with a private ip address (192.168.1.1) that can only access computer A. How do I use iptables to forward network traffic from B through A to the Internet? I need to use http, ftp, and https in order to use apt-get with sudo. Both computers run Ubuntu linux. I have tried using Squid but I think it is far too complicated for what I need to do.

  Read the article

• node.js server not running

  - by CMDadabo

  I am trying to learn node.js, but I'm having trouble getting the simple server to run on localhost:8888. Here is the code for server.js: var http = require("http"); http.createServer(function(request, response) { response.writeHead(200, {"Content-Type": "text/plain"}); response.write("Hello World"); response.end(); }).listen(8888); server.js runs without errors, and trying netstat -an | grep 8888 from terminal returns tcp4 0 0 *.8888 *.* LISTEN However, when I go to localhost:8888 in a browser, it says that it cannot be found. I've looked at all the related questions, and nothing has worked so far. I've tried different ports, etc. I know that my router blocks incoming traffic on port 8888, but shouldn't that not matter if I'm trying to access it locally? I've run tomcat servers on this port before, for example. Thanks so much for your help! node.js version: v0.6.15 OS: Mac OS 10.6.8

  Read the article

• DHCP server can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• Port-Forwarding in Virtual Box

  - by davidzaz

  I have Virtual Box setup with the following commands: vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/HostPort" 50000 vboxmanage setextradata myVm `"VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/GuestPort" 50000 vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/Protocol" TCP On the host machine, the following command times out: telnet localhost 50000 What am I doing wrong? The above command does work on the guest machine.

  Read the article

• How to use OpenVPN through a restrictive firewall?

  - by R.L. Stine

  I'm currently in the situation of attempting to setup OpenVPN on a personal VPS, for connection primarily through an overly restrictive firewall. All of the setups mentioned below work when used through a reasonably-firewalled connection. I have tried: OpenVPN running on the standard port OpenVPN running on port 443 (I start OpenVPN manually from the command line on the VPS and see that the server reports the connection being closed almost immediately, I assume this is a result of DPI on the firewall) STunnel running on port 443 to access OpenVPN and evade DPI. This is the most successful and allows a connection and internet access through the VPN for ~10-20 seconds, before the connection is forcibly closed. Is there anything else I can attempt?

  Read the article

• Is there a good tool for monitoring network activity on Mac OS X?

  - by xentek

  Is there a good bit of software on Mac OS X that I can use to monitor incoming and outgoing network activity? Nothing too geeky, I just want something simple to use. I'm on version 10.6 (Snow Leopard) if that helps.

  Read the article

• Why is iTunes using so much data?

  - by George

  I've been told by my ISP I'm using too much bandwidth so after using Activity Monitor to see that I'm using ~2GB a day I've used the nettop command line utility to work out where. Turns out it's iTunes. I don't use it for downloading/streaming music (other than podcasts of which I definitely don't have 2GB of new ones a day) or movies. What is iTunes doing? This is on a late 2009 MacBook running Lion 10.7.5 with iTunes version 10.7

  Read the article

• How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

  - by John

  I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

  Read the article

• Cannot enable wireless Ubuntu 10.04

  - by woaddoa

  I have recently installed Ubuntu 10.04, however I am having trouble getting wireless to work. Ubuntu says that wireless is disabled, and I am unable to enable it. I have tried Administration Hardware Drivers however the only drivers listed are Nivida graphics ones. I am unsure what to do as I do not think the process is the same as searching for drivers for a windows machine. Any advice appreciated.

  Read the article

• Cisco ASA 5505 network route for static IP hosts

  - by TheCapn

  I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

  Read the article

• Mac | Router not assigning the IP address.

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

• What is the correct network configuration for a devStack VM (virtualbox)?

  - by Olivier

  Usually when I setup a new Ubuntu VM, i keep the eth0 in NAT mode to get the internet & I add a eth1 interface in HostOnly mode so that I can ssh. But using this devStack guide : Running a Cloud in a VM, it looks like it tried to use eth0 as the public interface (install got stuck because eth0 lost the network). I know an OpenStack setup usually requires two NICs, so I'm wondering what is the correct configuration for my VM.

  Read the article

• Wireless Internet Connection Sharing in Ubuntu

  - by klutch2

  As the title states, I need to share a wireless connection with a laptop running Ubuntu as the AP. The setup will be as follows: Corporate WiFi <<== Laptop <<== Other Devices i.e. (iPad, iPhone) I want to be able to connect the "Other Devices" via WiFi to the laptop. I have thought of setting up an ad-hoc network by connecting to the Corporate WiFi and then setting up a new network and hoping the connection to both would stay, but that doesn't seem to work. If I set up the ad-hoc network by itself, I can see it from my "Other Devices". The reason I need this is because for some reason, my iPad and my iPhone will not connect to my corporate WiFi and I need to use them so I want to use my laptop to share the connection and act as an AP for my "Other Devices". My laptop is a Chrome CR-48 running Ubuntu and as some of you might know, it does not have an ethernet port, so having a wired connecting and then setting up a network is out of question. I want to connect to the Corporate WiFi and share that connection by having the laptop act as an AP for other devices.

  Read the article

• Using a second Wifi Router (in order to use a LAN port)

  - by Sledge81

  Problem: Connecting a TV decoder via Internet. It doesn't have inbuilt wifi so wired LAN is the only option. I bought a second Wifi Router so I could use its LAN port to create a wired internet connection to my decoder. What I want to achieve: The second Wifi Router should basically pick up the signal from the main wifi router. I would then use the LAN port to connect (with a wire) to the TV decoder. In other words have my secondary Wifi Router act as an access point, which will enable me to use a wired LAN connection to the decoder. What i've done so far: Connected the second Wifi Router to my laptop via the LAN ports. Access 192.168.1.1 and went into my second router. 1) SSID set to the same one as the main Wifi Router 2) Tried disabling DHCP and enabling DHCP (with the DNS and default gateway configured the same as the main router). When I check my network connections, I see the LAN connection too but it says 'Not connected to the internet' while the Wifi (main router) shows connected. Can someone please advise on how to use my second Wifi Router to connect to the main Wifi Router (and thus the Internet). Thanks. main wifi router: Zyxel secondary wifi router: TP Link

  Read the article

• How can I solve Windows PPTP VPN issues?

  - by Robin M

  I'm having persistent problems with Windows PPTP VPN connections. The VPN appears up whilst the tunnel won't transfer traffic (ping to a remote IP within the VPN works for a while, and then fails). The client receives routing information via DHCP. When the connection fails, the routing table is still correct so I don't think it's a routing problem. My internet connection is via an ADSL2 line. There's software to deal with PPTP problems, like TunnelRat, but I don't want to install v1.1 of the .NET framework and I'd rather get to the bottom of the problem (I have multiple VPN connections and some are more unreliable than others). What can I do to get to the bottom of this? Alternatively, what can I do to keep the connection alive?

  Read the article

• Can a laptop be compromised through WiFi if the machine never connects to a hotspot?

  - by MousePad

  For instance, you're laptop's wifi card is on, but you've deliberately not connected to any hot spots. Is there anyway it can be hacked while sitting there, and not connected?

  Read the article

• Setting up Relays in Windows

  - by Auditor

  I'm trying to setup a pivoting relay with netcat on Windows, replicating a scenario easily possible by using pipes in Linux. Assume machine A can route to machine B and machine B can route to machine C. If machine A needs to route to machine C, we can setup a relay on machine B which can pivot data back and forth for us using command redirectors and spl filetype pipe. Assume: machine C has nc -nlvp 3306 -e cmd.exe machine A has nc -nlvp 80 IF machine B was Linux we could have done mkfifo pipe nc -nv 127.0.0.1 80 0<pipe | nc -nv 127.0.0.1 3306 1>pipe so on machine B if we do nc -nv 127.0.0.1 80 0<&4 | nc -nv 127.0.0.1 3306 1>&4 Per this site, I should be able to achieve what I can with Linux, but unfortunately it is not working.

  Read the article

• VMWare Player disrupting Samba on Ubuntu 9.04 host?

  - by TonyUser

  I've had Ubuntu 9.04 running on this computer for a while now. I just installed VMWare Player on my system and now when I try to browse the network in the Ubuntu host all the computers will show up one time only. If I try to browse again, no computers appear and even the workgroup is missing. I have to run: sudo /etc/init.d/vmware stop sudo /etc/init.d/samba restart to get the network visable again. As long as VMWare Player is stopped Samba seems fine. I guess it's got to do with the virtual adaptors that VMWare installs. Is there a way to get them both to work, or did I just miss-configure something?

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >