Search Results

Search found 7392 results on 296 pages for 'hidden volume'.

Page 191/296 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• New PC: win7 install issues with 2x3TB in RAID1

  - by goober

  Background / Components Not sure what I've done wrong. Built one PC before successfully in a similar way but this one seems to be struggling. I have the following components: ASUS P8Z68-V/Pro Gen 3 (updated to latest firmware) 16GB (2x8GB) RAM corsair hx850 power supply 2x3TB drives on the intel z68 controller 1x128GB SSD on the Marvel controller sapphire 7950 The problem I set up my 3 TB disks in RAID1 controller appears to recognize them fine during boot as one 2.7TB raid1 volume windows setup sees two disks, both 746 GB, but will only let me install to one and appears to work fine. windows appears to install fine after installer reboots, I receive "windows failed to start" error referencing code 0xc000000e and "\Windows\system32\winload.exe every time I do an install, a new additional "win7" entry is added to the boot menu; all lead to this error. What I've tried: updated the BIOS to the latest firmware attempted to repair the install tried clearing / removing raid / re-raiding drives tried formatting the drives during install attempted to clear the menu Of entries (can't figure out how to do that) No matter how many times I destroy the raid array, format the disks, etc. the boot entries keep piling up. Any idea where I'm going wrong?

  Read the article

• Sending e-mail on behalf of our customer(s), with Postfix

  - by NathanE

  We send e-mail on behalf of our customers, via our own SMTP services. It's always been a problem for us because usually our "spoofing" of their source address results in the mails being caught in spam traps. This hasn't been a problem in the past due to the small volume and low importance of these mails that we sent. However this requirement has recently changed and we need to fix this issue. We realise that fundamentally our application is sending e-mail incorrectly, as per this post: Send email on behalf of clients However, we would like to resolve the problem at the SMTP server level. We have deployed a server running Postfix. Is it possible to have Postfix automatically adjust the mail headers so that we get this "Sent on behalf of" behaviour? I figure it should just be a case of Postfix noticing that the FROM address is the spoofed (i.e. a domain that is not mentioned in its config anywhere) and therefore inject/replace the appropriate headers to get the desired effect. Thanks.

  Read the article

• Using Truecrypt to secure mySQL database, any pitfalls?

  - by Saul

  The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

  Read the article

• Can ZFS ACL's be used over NFSv3 on host without /etc/group?

  - by Sandra

  Question at the bottom. Background My server setup is shown below, where I have an LDAP host which have a group called group1 that contains user1, user2. The NAS is FreeBSD 8.3 with ZFS with one zpool and a volume. serv1 gets /etc/passwd and /etc/group from the LDAP host. serv2 gets /etc/passwd from the LDAP host and /etc/group is local and read only. Hence it doesn't not know anything about which groups the LDAP have. Both servers connect to the NAS with NFS 3. What I would like to achieve I would like to be able to create/modify groups in LDAP to allow/deny users read/write access to NFS 3 shared directories on the NAS. Example: group1 should have read/write to /zfs/vol1/project1 and nothing more. Question The problem is that serv2 doesn't have a LDAP controlled /etc/group file. So the only way I can think of to solve this is to use ZFS permissions with inheritance, but I can't figure out how and what the permissions I shall set. Does someone know if this can be solved at all, and if so, any suggestions? +----------------------+ | LDAP | | group1: user1, user2 | +----------------------+ | | | |ldap |ldap |ldap | v | | +-----------+ | | | NAS | | | | /zfs/vol1 | | | +-----------+ | | ^ ^ | | |nfs3 |nfs3| v | | v +-----------------------+ +----------------------------+ | serv1 | | serv2 | | /etc/passwd from LDAP | | /etc/passwd from LDAP | | /etc/group from LDAP | | /etc/group local/read only | +-----------------------+ +----------------------------+

  Read the article

• Looking for a software / something to automate some simple audio processing

  - by Daniel Magliola

  I'm looking for a way to take a 1-hour podcast MP3 file and split it into several several 2-minute MP3s. Along the way, I'd like to also do a few things like Amplify the volume. The problem I'm solving is that I have a crappy MP3 player that won't let me seek forward or backward, nor will it remember where I left it when I turn it off, plus, I listen to these in a seriously high-noise situation. Thus, I need to be able to skip forward in large chunks (2-5 minutes) to the point where I left it. Is there any decent way to do this? Audacity doesn't seem to have command-line capabilities. I'm willing to write some code, for example, to call something over the command line and get how long the MP3 file is, to later know how many pieces i'll have, and then say "create an MP3 with 0:00 to 2:00", "create an MP3 with 2:00 to 4:00", etc. I'm also willing to pay for the right tools if necessary. I also don't care how slow this runs, as long as I can automate it :-) I'm doing this on Windows. Any pointers / ideas? Thanks!

  Read the article

• Dead Linux server - need help and options

  - by Choi S.

  All, I have a Dell PE 1950 w/ 2 SATA drives in a software RAID1. OS is CentOS 5.5 (2.6.18.x). Starting this afternoon we received HW errors (something on the bus is bad, E171F) and the machine became unresponsive. We hard booted and it came back up for about 5 hours but then it happened again. I'm trying to figure out our options. Unfortunately we do not have similar hardware but I have a small desktop that I can use. I was contemplating putting one of the drives into the desktop and then starting it up. My goal was to then P2V it using Vmware converter but apparently the free v5.x doesn't support hot cloning/converting on a RAID volume, only the Enterprise 4.x version of Converter does. My questions are: 1.) Is putting a single drive out of a RAID1 pair into another piece of HW is safe? Based on my research and understanding it appears to be but would like confirmation. 2.) Is there any work around to the Vmware Converter not supporting RAID volumes during a hot clone/convert session? 3.) Are there other options I'm overlooking? Thanks in advance for reading and responding. --Choi S.

  Read the article

• Reusing Raid 5 Drive?

  - by User125

  We have two servers (ML530 G2 and DL380G2) w/ identical HP 10K RPM SCSI drives w/ a raid 5. One is decommissioned and the other will be decommissioned shortly. However, one of the drives on the production server had a drive failure. My hope was to take one of the drives from the decommissioned server and pop it into the production server. Both are running RAID 5. I broke the array on the decomm. server. To my knowledge, that should have wiped out all the volume and partition information. However, I do not know if it is safe to then take a drive from the decomm'ed server and replace the failed drive. Will the existing array see it as a replacement drive, wipe it and rebuild? Or will it fail because it was used in an array before. Are there any remnant data that resides on the drives after deleting a raid 5 array? These servers are 10-15 years old, so we're just trying to keep them alive until we decommission it. I'm not looking to pay a premium to find a vendor that still sells replacement drives for this system.

  Read the article

• What could cause Windows 7 to hang whenever I install something?

  - by Larsenal

  I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

  Read the article

• No partition on USB Flash Drive?

  - by Skytunnel

  A friend gave me a corrupted USB memory stick to try recovery data from. But I've had some unusual results, so thought I'd share to see if anyone is familiar with this problem... First off I just tried opening from my own PC. Windows prompted to Format the drive, which I of course declined Downloaded TestDisk to anaylsis the drive. And right away I noticed something strange, on the listed drives it comes up as Disk /dev/sdc - 6144 B - USB Flash Drive That's right, the first USB flash drive smaller than a floppy disk!? Moving on anyway... first anaylsis comes up with: Partition sector doesn't have the endmark 0xAA55 TestDisk's Quick Search gave no results, moved on to Deeper Search: No partition found or selected for recovery This left me stumped. I tired a couple of other programs with no success I did manage to get a backup image, but it was just as small as TestDisk indicated, so nothing of use on it After a few hours trying various suggestions from other sources, I gave in and just tried formatting the drive. But returned the message: Windows was unable to complete the format. From googling that, the suggestion was to delete the partition. But there is no partition to delete in this case. most recently I've tried formatting from cmd, and got this result: Format D: /FS:FAT32 The type of the file system is RAW The new file system is FAT32 Verifying 0M 11 bad sectors were encountered during the format. These sectors cannot be guaranteed to have been cleaned The volume is too small for FAT32 Anyone got any suggestions? UPDATE: As per suggestion from @Karen, I tried running a CLEAN from DISKPART, results as follows DiskPart has encountered an error: The request could not be preformed because of an I/O device error.

  Read the article

• Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

  - by Warren P

  I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

  Read the article

• I (stupidly) converted a TrueCrypt encrypted disk to GPT in Disk Management: now TrueCrypt won't mount it

  - by asilentfire

  Backstory: After moving a Macrium Reflect disk image from my TrueCrypt external drive (with whole disk encryption) onto a unencrypted drive and using Windows PE with Macrium Reflect to restore my internal disk to the recovery image on the external unencrypted drive, my Windows 8 failed to boot. I then went back and also recovered the System Partition (looking now, it is currently EFI), but I still couldn't boot into my backup.. I was in a hurry to get online for something so I just did a clean install of Windows 8, without the backup.. After I installed Windows 8, I went into Disk Management out of curiosity to see if there were other partitions with Windows 8 that Macruim might have missed, and there is (by default) a Recovery Partition of 100MB. My memory of this is hazy, as I was trying to get up and running for an exam at 4 AM: Something in Disk Management prompted me to convert my encrypted external drive to GPT.. I have no idea why I did this, but I went ahead and allowed it to convert my TrueCrypt drive to GPT. Now, I can't mount the drive in TrueCrypt.. Disk Management sees it as Disk 1, Basic, and Unallocated. I tried converting it back to MBR with Disk Management, but no dice with TrueCrypt :( If I try to mount the disk in TrueCrypt I get the message: Incorrect password or not a TrueCrypt volume I should never have messed with a Truecrypt drive in Disk Management, but I did. I have important college work in that drive, and fear I have lost it forever. PLEASE HELP

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• Netbook thinks it is a desktop

  - by Narcolapser

  Question: Are, and if so what, there packages for download that I can get netbook to understand it is not a desktop and that it is a netbook. Info: I'm running an Acer Aspire One with ubuntu desktop 9.10. I tried Ubuntu Netbook Remix first but it has graphics issues with the aspire one. So I changed to Ubuntu Desktop. It was the only distro (after debian, centOS, Fedora, and Knoppix all failed me) that I managed to get working. The only thing is that it is having issues doing things that a netbook/laptop should be doing. most notably is that it will run it's battery dead if I close the screen and throw it into my back pack. It seems to just stay fully on and runs it's self to death. also it will lock up some times if I close the screen and come back to it 10 or 20 minutes later. It also won't retain volume settings when I reboot, as well as screen brightness. and just a couple of other things that I can't quite put my finger on, but just seem amiss. like I said, Essentially my netbook thinks it is a desktop, how can I fix this? ~N

  Read the article

• Microphone doesn't work

  - by mandy

  I'm having a trouble with my built in microphone. Even if I use headphone with mic, it doesn't really work. The weird thing is, if I clap the green lines of the speaker icon jumps, but if I speak it doesn't. I have also tried some recordings, but I can not hear myself and adjusting the volume didn't help at all. I tried to restore it, still no change. I have updated it in the device manager, but it said there that it's up to date and the devices are working properly. Until I decided to recover the whole system (wherein I pressed zero and switch on button) to my surprise, the settings became different, most programs were deleted, even my files. It's like it was formatted and I'm so sad that the mic was not fixed. I really don't know what to do now. My laptop model is Toshiba satellite m840. I want to it return to its settings/set up just before I Recover the system and bring back all the programs that we're installed and of course, most of all, to fix my microphone so I can use Skype again and other video calling application.. I hope someone could help me. Thanks a lot!

  Read the article

• How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it?

  - by Gareth

  I was going to install Fedora 15 along side my Windows 7 Starter on my Acer Apire One D255E and at some point during the resizing of the NTFS partition (the one with Windows on it) the setup failed. Now I cannot access this partition from any OS. When I tried to access it from a Fedora install running on a USB flashdrive I get this error: Error mounting: mount exited with exit code 12: Failed to read last sector (452534271): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? It doesn't make a lot of sense to me but I was really hoping it would to someone and they can give me a way to restore the partition without losing everything on it (I have a lot of important notes from various classes on there)? Cheers.

  Read the article

• Write stderror to a file using PowerShell

  - by Zian Choy

  How do I capture error messages from a PowerShell-launched command in a text file? I searched the Internet for a while and found that supposedly, I should be able to do something like cmd /c "big blob of text >C:\output.txt 2>c:\errors.txt" to direct the output to output.txt and the errors to errors.txt but when I try to run the command, I get the following error: cmd.exe : The filename, directory name, or volume label syntax is incorrect. At C:\Users\Zian\Desktop\Untitled1.ps1:27 char:4 + cmd <<<< /c $command + CategoryInfo : NotSpecified: (The filename, d...x is incorrect.:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Furthermore, if I try to run the command without everything starting at "2", then the command executes correctly and output.txt catches the right output. I looked at Redirect stderr to variable in powershell but it wasn't helpful because the answer to that question suggests capturing the entire output and filtering it in memory. In my case, I am backing up every database on a computer and since the databases won't fit in my laptop's RAM, I cannot use the question's solution. I also found tantalizing suggestions about using $err = @(command goes here) but with no information on what to do other than simply inserting that line of text. I tried to utilize the search function on Serverfault with the string "@()", but it did not return any results. What can I do to get the error messages into errors.txt?

  Read the article

• Assembling Software RAID in Live CD for data recovery

  - by Maletor

  I need help recovering some data that's on my RAID which is on a LVM on my server running Ubuntu. What happened was I deleted the logical volume that controlled my swap space which was on a partition on drives sda2, sdb2, sdc2, and sdd2 in RAID1. This foobared my whole system for one reason or another. Booting leave me with grub rescue and an error saying that it is an unknown filesystem. When I boot to a live cd I can see my RAID arrays and I can even start them up. However, it doesn't appear to mount them anywhere so I can't see the data. I am in the live cd now and I have done sudo apt-get install mdadm lvm2 so it should be mounting them correctly. I just can't see why it wouldn't. Please any help is appreciated here. Here is some output. By the way, there are 3 RAIDs, 1) /boot 100mb RAID1, 2) swap 10gb RAID1, 3) root 990GB RAID5 ubuntu@ubuntu:~$ df -h Filesystem Size Used Avail Use% Mounted on aufs 124M 101M 18M 86% / none 2.0G 324K 2.0G 1% /dev /dev/sde1 2.0G 826M 1.2G 42% /cdrom /dev/loop0 667M 667M 0 100% /rofs none 2.0G 164K 2.0G 1% /dev/shm tmpfs 2.0G 28K 2.0G 1% /tmp none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw /dev/md1 91M 73M 15M 84% /media/5ac3dbf1-a6c5-409c-96ae-edc6e27992c7 ubuntu@ubuntu:~$ cat /etc/fstab aufs / aufs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda2 swap swap defaults 0 0 /dev/sdb2 swap swap defaults 0 0 /dev/sdc2 swap swap defaults 0 0 /dev/sdd2 swap swap defaults 0 0

  Read the article

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• SQL Server Replication Backup

  - by user18039

  Hi We have a new system that runs on SQL Server 2008 r2 64-bit. There is a primary on-line transactional processing (OLTP) database that accepts a high volume of updates from several thousand Point of Sale systems at stores around the country. In order to protect this vital function, I have decided to introduce a dedicated reporting database server - from which multiple users will run some pretty complex reports. I realise that there were a number of choices but I decided to use Transaction Replication as the mechanism for copying the data from the OLTP database to the new reporting database - one way replication. The solution has worked well in test. I'm now being asked what changes need to be made to the backup policy to cover the architectural changes. I have read pages such as MSDN:Strategies for Backing Up and Restoring Snapshot and Transactional Replication but I think these are overkill for my solution. In fact, my current thinking is that we simply need to continue making backups of the OLTP data and logs. If the Reporting db or any of the system replication (eg distribution) databases fail then it's no big deal - we can clear all down then re-create the replication. I realise that taking a complete snapshot of the OLTP would be time consuming (approx 5 hours) but I'd be more relaxed about this that trying to restore backups of the various data and log files in the correct sequence. My view is that the complex strategies set out in the MSDN article would only be the way to go for a more complex replication solution than I have, eg if there were multiple subscribers with 2-way replication. Would you agree? I'd be grateful for any advice. Many thanks, Rob.,

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• Disk fragmentation when dealing with many small files

  - by Zorlack

  On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation may be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation? Additional Info: The average file size is 8-14KB Format information from fsutil: NTFS Volume Serial Number : 0x2ae2ea00e2e9d05d Version : 3.1 Number Sectors : 0x00000001e847ffff Total Clusters : 0x000000003d08ffff Free Clusters : 0x000000001c1a4df0 Total Reserved : 0x0000000000000000 Bytes Per Sector : 512 Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x000000208f020000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x000000001e847fff Mft Zone Start : 0x0000000002163b20 Mft Zone End : 0x0000000007ad2000

  Read the article

• Switched to new router and now experiencing lag?

  - by Mr_CryptoPrime

  I switched from a dynex-802.11b/g to a Netgear-802.11b/g/n just yesterday. My router is down stairs because my phoneline upstairs is retarded....but my PS3 is still upstairs (SOCOM: Confrontation is game I am experiencing issues). I have done everything I can to make sure the connection is solid and have checked the status and it has been as high as 80% and usually lingers at about 60%. I thought about upgrading my bandwidth from 1.5mbs to 7mbs, but I am guessing something is wrong if it worked fine before? Now the game seems more laggy and my voice chat is choppy. Others seem to receive my voice data fine because I can hear my own feedback clearly from other players (if you are in close proximity to another player and speak and there volume is loud enough sometimes you can hear yourself). I wonder if I port forward or setup DMZ then it will be fixed, but I am not sure and don't know quite how to do it. Has anyone else ever experienced this when switching routers? What did you do to fix it? Thanks!

  Read the article

• Google Chrome on Linux not using ALSA for sound

  - by DarkMoon

  On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

  Read the article

• MySQL : table organisation for very large sets with high update frequency

  - by Remiz

  I'm facing a dilemma in the choice of my MySQL schema application. So before I start here is a picture extremely simplified of my database : Schema here : http://i43.tinypic.com/2wp5lxz.png In one sentence : for each customer, the application harvest text data and attached tags to each data collected. As approximation of the usage of each table, here is what I expect : customer : ~5000, shouldn't grow fast data : 5 millions per customer, could double or triple for big customers. tag : ~1000, quite fixed size data_tag : hundred of millions per customer easily. Each data can be tagged a lot. The harvesting process is permanent, that means that around every 15 minutes new data come and are tagged, that require a very constant index refreshing. A lot of my queries are a SELECT COUNT of DATA between specific DATES and tagged with a specific TAG on a specific CUSTOMER (very rarely it will involve several customers). Here is the situation, you can imagine with this kind of volume of data I'm facing a challenge in term of data organization and indexing. Again, it's a very minimalistic and simplified version of my structure. My question is, is it better: to stick with this model and to manage crazy index optimization ? (which involves potentially having billions of rows in the data_tag table) change the schema and use one data table and one data_tag table per customer ? (which involves having 5000 tables on my database) I'm running all of this on a MySQL 5.0 dedicated server (quad-core, 8Go of ram) replicated. I only use InnoDB, I also have another server that run Sphinx. So knowing all of this, I can't wait to hear your opinion about this. Thanks.

  Read the article

• Windows 8 Communication Sound Setting not working

  - by blackmastiff

  I've been having a problem on my new laptop recently which is familiar but baffling the usual fixes. I'm running Windows 8 with an onboard Realtek soundcard. It's similar to the one on my older computer running Windows 7. The problem is, when I'm in Skype or Mumble, Windows changes the sound output to lower everything else automatically. I've disabled the communications sound change option on the communications tab within sound devices and checked all the applications settings to insure that they are not responsible. They aren't, and I noticed something else. When I'm in the sound properties dialog, and I switch to the microphone tab, the same audio output reduction occurs. This seems to say to me that the microphone must be responsible in some way, but seeing as I uninstalled all the drivers and installed windows drivers instead, I'm confused as to why this would be occurring. Any thoughts? EDIT: I just tried disabling the built in microphone and the sound no longer get changed. More confused now? As soon as I turn it back on, the sound gets dropped again. Incidentally, the fix for this on windows 7 was this question: Windows 7 lowers applications' volume automatically I've got my computer set that way and it doesn't work.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >