Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 192/1359 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• No signal to monitor after driver install

  - by Hossam Riyad

  After installing 10.10 I used Hardware Drivers (Jockey) to install the graphics driver v11.2 for my ATI HD 5770. After restarting to activate the driver all went well and the boot screen showed up but not like the normal one the text was rough on the edges and after the boot finished the screen turned black and no signal. I have found some forum discussions about that issue but no fix worked for me. I use a DVI to VGA adapter and I have a View Sonic E70F CRT monitor. PC specs CPU: Intel Q8300 2.5/4 GPU: ATI Powercolor HD5770 1GB MB: Gigabyte EP43-UD3L RAM: 4GB 1066 Kingston

  Read the article

• Can't get past the Ubuntu loading screen when installing

  - by Oscar Godson

  I'm trying to install Ubuntu 11.04 onto some custom made PC that my father in law tried building. It had Windows on it, but he wants Ubuntu so he asked me to do it. I've installed Ubuntu 11.04 on a few computers no issues, but on this computer I get to the all purple screen with the Ubuntu logo and the orange and white dots that light up. Like this: The fan is also super, super loud and sounds like the whole thing is going to explode and has been running like this for 15 mins ish. Then, after about 15 mins the dots stop animating from orange to white and usually just stick at all orange. Any ideas?

  Read the article

• Can't bind gnome-do to Super + Space or Ctrl+Alt+Space

  - by johnf

  With today's updates to 12.04 I can no longer bind gnome-do to either ctrl+alt+space or super+space. With 11.10 it wasn't possible to use super+space, on a fresh install of 12.04 super+space was working properly. Today it stopped working, if I try to bind control+alt+space then the controlkey shows up in the keyboard binding as Primary. I am running Unity, which in the past blocked super+space, it seemed to have stopped blocking it on 12.04. It shouldn't affect ctrl+alt+space. Configuring either binding produces the following error in the gnome-do output: libdo-WARNING **: Binding 'space' failed! libdo-WARNING **: Binding 'space' failed! I'm stuck binding to shift+alt+space.

  Read the article

• Adding a Wine (.exe) file to open/play files in Thunar's 'Custom Actions'

  - by cipricus

  What is the line parameter in Thunar's "custom actions" that would play a music directory in a Wine (.exe) program? I want to put Foobar2000 (and possibly other such applications) in Thunar's Custom Actions (actions that can be added/edited to be used in the context menu to play music folder's content). If I put no command parameter at the end of path, the player opens but there is no play and no files in the play list. If I add any of the listed parameters I get the error unknown commandline parameter: /path.to.file (Giving an answer to this question depends on knowing the CLI command that would have to be added into Thunar - so please look at this question too)

  Read the article

• ubuntu software center not working after update

  - by HOS

  today I'm updated my Ubuntu (I have KDE Desktop installed on it before) & After update , my Ubuntu software center said : items cannot be installed or removed until the package catalog is repaired .do you want to repair it ? and when I'm clicked on Repair ,after 2 seconds it says : the installation or removal of software package Failed , with this details : installArchives() failed: dpkg: dependency problems prevent configuration of kdm: kdm depends on libkworkspace4abi1 (= 4:4.8.5-0ubuntu0.1); however: Version of libkworkspace4abi1 on system is 4:4.8.5-0ubuntu0.2. kdm depends on kde-workspace-kgreet-plugins (= 4:4.8.5-0ubuntu0.1); however: Version of kde-workspace-kgreet-plugins on system is 4:4.8.5-0ubuntu0.2. dpkg: error processing kdm (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kubuntu-desktop: kubuntu-desktop depends on kdm; however: Package kdm is not configured yet. dpkg: error processing kubuntu-desktop (--configure): No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. dependency problems - leaving unconfigured Errors were encountered while processing: kdm kubuntu-desktop Error in function: dpkg: dependency problems prevent configuration of kdm: kdm depends on libkworkspace4abi1 (= 4:4.8.5-0ubuntu0.1); however: Version of libkworkspace4abi1 on system is 4:4.8.5-0ubuntu0.2. kdm depends on kde-workspace-kgreet-plugins (= 4:4.8.5-0ubuntu0.1); however: Version of kde-workspace-kgreet-plugins on system is 4:4.8.5-0ubuntu0.2. dpkg: error processing kdm (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kubuntu-desktop: kubuntu-desktop depends on kdm; however: Package kdm is not configured yet. dpkg: error processing kubuntu-desktop (--configure): dependency problems - leaving unconfigured please help me i love Ubuntu & i want to repair it . Thanks

  Read the article

• ubuntu 11.10 install 4.4.3-0ubuntu2 package dependencies

  - by HuangheWoo

  before sudo apt-get install gnuplot I sudo apt-get build-dep gnuplot to resolve package dependencies. ~$ sudo apt-get build-dep gnuplot Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'liblua5.1-0-dev' instead of 'liblua5.1-dev' The following packages will be REMOVED: libgd2-xpm ubuntu-desktop The following NEW packages will be installed: debhelper diffstat html2text intltool-debian libbsd-dev libcairo-script-interpreter2 libcairo2-dev libedit-dev libexpat1-dev libfontconfig1-dev libfreetype6-dev libgd2-noxpm libgd2-noxpm-dev libglib2.0-dev libjpeg62-dev liblua5.1-0-dev libncurses5-dev libpango1.0-dev libpixman-1-dev libpng12-dev libreadline-dev libreadline6-dev libtinfo-dev libwxbase2.8-dev libwxgtk2.8-dev libxcb-render0-dev libxcb-shm0-dev libxft-dev libxrender-dev po-debconf quilt texinfo wx2.8-headers x11proto-render-dev 0 upgraded, 34 newly installed, 2 to remove and 0 not upgraded. Need to get 9,100 kB of archives. After this operation, 37.8 MB of additional disk space will be used. It says the "ubuntu-desktop" will be removed, but "ubuntu-desktop" is important. What's should I do?

  Read the article

• Linux DD command partition -to- partition

  - by Ben Jackson

  I just used the DD command to copy the contents of one partition over to another partition on another drive, like this: dd if=/dev/sda2 of=/dev/sdb2 bs=4096 conv=noerror sda2 partition was 66GB and sdb2 was 250GB. I read that by doing this the extra space on the drive I am copying to will be wasted, is this true? I wasn't worried about loosing the extra space for the time being however, I just ran: sudo kill -USR1 (PID) to view the current status of DD and it has written over 66GB of data, will it continue to write data until it gets to 250GB? If so, is there a way to stop the process without corrupting it as waiting for it to write blank space seems like a waste of time.

  Read the article

• Ubuntu confuses my partitions

  - by Diego

  I have 3 relevant partitions split between 2 disks, sda2: Windows 1 partition sda3: Ubuntu partition sdb1: Data partition I was using pysdm to add a label to my partitions and somehow I seem to have screwed up my installation. Now, every time I access the Data partition mounted in /media/Data I see the files in my Windows partition, and viceversa. I've tried unmounting and remounting correctly to no avail, it seems that wherever I mount sda2, if I access that folder I get the files in sdb1, and viceversa. Anyone know what may have happened and how to solve this? Update: This is the result of blkid: /dev/sda1: LABEL="System Reserved" UUID="C62603F02603E073" TYPE="ntfs" /dev/sda2: LABEL="Windows" UUID="00A6D498A6D49010" TYPE="ntfs" /dev/sda5: UUID="033cac3b-6f77-4f09-a629-495dc866866a" TYPE="ext4" /dev/sdb1: LABEL="Data" UUID="BCD83AE3D83A9B98" TYPE="ntfs" These are the contents of my ftsab file: UUID=033cac3b-6f77-4f09-a629-495dc866866a / ext4 errors=remount-ro,user_xattr 0 1 /dev/sda1 /media/Boot_old ntfs defaults 0 0 /dev/sda2 /media/Windows ntfs defaults 0 0 /dev/sdb1 /media/Data ntfs nls=iso8859-1,ro,users,umask=000 0 0

  Read the article

• I am not able to install wine

  - by Jose Ramon

  I can't install wine in Ubuntu 12.10. The report is: Los siguientes paquetes tienen dependencias incumplidas: (The following packages have unmet dependencies) wine1.4: PreDepends: dpkg (>= 1.15.7.2~) pero 1.16.7ubuntu6 no está instalado Depends: libc6 (>= 2.14) pero 2.15-0ubuntu20 no está instalado Depends: wine1.4-amd64 (= 1.4.1-0ubuntu1) pero 1.4.1-0ubuntu1 no está instalado Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) pero no va a ser instalado I would like that you help me in this problem. Thanks for everything.

  Read the article

• Measure load of ubuntu server

  - by user84471

  I have Ubuntu server and apache2 installed on it. I want to benchmark it using ab tool from another machine. I want to know how measure load of this program. In top is showing this: top - 06:02:19 up 3 min, 2 users, load average: 0.28, 0.26, 0.12 Tasks: 94 total, 2 running, 92 sleeping, 0 stopped, 0 zombie Cpu(s): 67.2%us, 5.5%sy, 0.0%ni, 26.3%id, 0.5%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 499320k total, 342028k used, 157292k free, 42504k buffers Swap: 514044k total, 0k used, 514044k free, 71388k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1521 www-data 20 0 49180 22m 4144 S 23 4.6 0:00.68 apache2 1520 www-data 20 0 49180 22m 4152 S 22 4.6 0:00.66 apache2 1124 www-data 20 0 49180 22m 4152 S 22 4.6 0:00.70 apache2 1519 www-data 20 0 49180 22m 4152 S 20 4.6 0:00.70 apache2 1525 www-data 20 0 49180 22m 4144 S 16 4.6 0:00.47 apache2 1123 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.78 apache2 1125 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.77 apache2 1126 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.73 apache2 1127 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.74 apache2 1523 www-data 20 0 42896 14m 3388 R 5 3.1 0:00.14 apache2 1038 whoopsie 20 0 24476 3720 2856 S 0 0.7 0:00.01 whoopsie 1089 root 20 0 34060 6988 3640 S 0 1.4 0:00.05 apache2 1338 ubuntu 20 0 2832 1192 944 S 0 0.2 0:00.30 top 1417 ubuntu 20 0 9652 1456 824 S 0 0.3 0:00.02 sshd 1 root 20 0 3540 1876 1248 S 0 0.4 0:00.83 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.03 ksoftirqd/0 4 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0 0.0 0:00.48 kworker/u:0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 10 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/1 11 root 20 0 0 0 0 S 0 0.0 0:00.17 kworker/0:1 12 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 14 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 15 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 16 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 17 root 20 0 0 0 0 S 0 0.0 0:00.32 kworker/u:1 18 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 19 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 20 root 0 -20 0 0 0 S 0 0.0 0:00.00 kintegrityd 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 kblockd 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 ata_sff 23 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd So its difficult to do it without any script or program. How can I do this?

  Read the article

• Running CRON job on Ubuntu server for SugarCRM

  - by Logik

  I am pretty inexperienced in Linux, so be descriptive on your answer. My environment: Local Linux server 12.04 hosting Sugar CRM 6.5.2. There is area in sugar CRM called scheduler. I can configured some predefined jobs here. in my case i am trying to run email reminders (ever min/hour/day/month). For this scheduler to be effective, i read some where i need to setup CRON job. So I did some research & finally put following lines in CRONTAB for the root user, as per instructions given in sugarCRM. * * * * * cd /var/www/crm; php -f cron.php > /dev/null 2>&1 Well I am creating contracts in my sugarCRM (AOS module) & I want email reminders to be sent for these contracts to the concern person. Now my sugarCRM email is configured correctly & I can send test emails using it. But the CRON + scheduler not giving any result. I can't receive any emails. Then I tried to read /var/log/syslog & it is showing entry for following line each minute. Oct 27 15:03:01 unicomm CRON[28182]: (root) CMD (cd /var/www/crm; php -f cron.php /dev/null 2&1) I've few questions: what does the CRON job line i've added in crontab mean? cd /var/www/crm; php -f cron.php > /dev/null 2>&1 is not making any sense to me. How am i suppose to get this thing work? I've searched a lot (including SugarCRM forum), but no luck.

  Read the article

• Send arbitrary commands to modem for info

  - by mydoghasworms

  I have a USB 3G data card and modem. According to the supplier, to check the data balance on the account, I must dial a number like *89# (or whatever) from the handset. The device appears as a ppp0 interface in my network devices. How does one go about issuing commands to the modem to send the commands and receive back the information? UPDATE: OK, I found some help here: http://www.linuxquestions.org/questions/linux-hardware-18/sending-at-commands-to-a-sms-modem-372445/, but firstly, there are 3 ttyUSB devices on my system, and I assume that one of them is the 3G modem, but how can I tell? Secondly, trying to echo something to two of them says that the device is busy, which stands to reason, because I am using it to connect to the internet. Some help, please?

  Read the article

• Ubuntu installation on Windows , I can't find my way back.

  - by Poofs

  So recently I have installed Ubuntu as an OS in addition to my Windows because it looked good and I have used it in the past and I liked it. Before I installed Ubuntu, they (the website) have given me a help list that shows that I will have the option of having Windows aside to Ubuntu (dual install), while I work with the Ubuntu OS. They told me that if I either put it in a CD or USB drive, I'll be okay. So there I was, installing Ubuntu, saving the Ubuntu file on my USB drive first, then afterwards clicking it and therefore proceeded to install. The problem is once I installed Ubuntu, it directed me to the 'login' page without giving me an option for dual-installing (you know, the language portion and so on). Now I tried both to suspend and shut off, and it seems like I cannot access my Windows files/account anymore and it really is unfortunate. Now I am FREAKING out, because this is a shared computer that my family uses (it's like a main computer in the house) and everyone's files are on this. It is extremely crucial for me to get these Windows files back because if I don't, my life will end tonight. Please, if someone can help me, I will love you forever. Please just help me, this is urgent. I'm sure a lot of people have experienced this too, but I have found nothing on the website helpful for me as Ubuntu is a very new thing for me. Thanks everyone! :)

  Read the article

• New instalation with invalid signatures: NODATA 1 NODATA 2 error

  - by marcos nobre

  I am installing 13.04 into a VirtualBox machine. After installing, I receive this error after sudo apt-get update: Ign http://archive.ubuntu.com raring Release E: Erro GPG: http://archive.ubuntu.com raring Release: the following signatures were invalid: NODATA 1 NODATA 2 I have already tried: Install minimal server version; Install 12.04 desktop version; Everything gives me the same error.

  Read the article

• How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

  - by Alexander Tritan

  I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

  Read the article

• libnotfy1(>= 0.4.4) and libnotify1-gtk2.10 for Ubuntu 11.10

  - by Aamir

  I have recently downloaded the latest version of Lotus Symphony 3.0.1 but whenever I try to install it, it shows the following dependencies. Can anybody tell where I can find these dependencies. dpkg: dependency problems prevent configuration of symphony: symphony depends on **libnotify1 (>= 0.4.4)**; however: Package libnotify1 is not installed. symphony depends on **libnotify1-gtk2.10**; however: Package libnotify1-gtk2.10 is not installed. dpkg: error processing symphony (--install): dependency problems - leaving unconfigured Errors were encountered while processing: symphony

  Read the article

• Bastion unexpectedly exits when I move my cursor

  - by user69358

  I downloaded the Humble Indie Bundle V, mostly because my friend told me about how great Bastion was. When I first installed it, I was getting the seemingly common "black screen" error that most people got (fixed that half with this http://ubuntuforums.org/showthread.php?p=11992661). But I also have an error where every time I move my cursor, in any direction, any amount, the game closes instantly. I can use the keyboard no problem, but without fail, every time I move my mouse, it crashes. Does anyone know what might be causing this? Has anyone encountered anything like this before? I am worried it may be a hardware issue, but hoping someone might be able to help me out. I'm running Ubuntu 12.04 on a Dell Studio 1558. Graphics card is the stock Intel graphics card, running on 4 GB of RAM.

  Read the article

• How to bind mouse buttons to keys?

  - by Callum Rogers

  I have a Logitech MX400 Laser Mouse which has 5 buttons + 4 for vertical/horizontal scrolling. I would like it set up so instead of horizontal scrolling pressing right on the scrollwheel will send Ctrl+Tab and left will send Ctrl+Shift+Tab, which will allow me to cycle through tabs in browsers. Also, it would be nice if I could remap the middle button to one of the ones on the side as it is really hard to press down. Another bonus would be if I could write a script that allows me to define what buttons do what dependent on which window is currently active. I have tried using xmodmap but I could only see how to rearrange buttons, not have them send key signals. Thanks in advance. Button Map (using xev): Left 1 Middle 2 Right 3 ScrollUp 4 ScrollDown 5 ScrollLeft 6 ScrollRight 7 Backward 8 Forward 9

  Read the article

• What would cause the "gi" module to be missing from python?

  - by Catalin Dumitru

  After some not so clever editing of the default Python version in Ubuntu, from 2.7 to 3.2, I ended up breaking my entire system. After my computer imploded and everything stopped working, I tried to revert back my changes (by linking /usr/bin/python2.7 to /usr/bin/python and changing the default version in /usr/share/python/debian_defaults back to 2.7) but some things are still broken. For example when I type "import gi" in the python interpreter I get the fallowing message : >>> import gi Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named gi >>> error which appears with some programs too (eg: gnome tweak tool). I have tried re-installing python both from the software center and from sources, but the same error persists. Python -- version now returns : Python 2.7.2 and also some software packages which depend on python 2.7 are now working (for example the software center), but some things are still broken. Is there anything I can do to completely re-install python 2.7 as the default version?

  Read the article

• How do I install Revenge of the Titans?

  - by Akash

  I've downloaded the .deb file of Revenge of the Titans, and installed it using Ubuntu Software Center. Now, when I try to launch it using the software launcher nothing happens. Any ideas? The .deb file was downloaded from the Humble Indie Bundle. I am unable to launch it from the terminal ( the command revenge-of-the-titans says command not found ). I also tried the .tar.gz. When I extract it and run ./revenge.sh , nothing happens. No output on the terminal or anything at all. I have set chmod 777 revenge.sh as well. The command /opt/revengeofthetitans/revenge.sh does not give any output. If I run gedit /opt/revengeofthetitans/revenge.sh in the terminal: > #!/bin/bash > # > # revenge.sh > # > ############################################################################### > > SCRIPT="`basename $0`" > GAMEDIR="${HOME}/.revenge_of_the_titans_1.80" LOGFILE="${GAMEDIR}/${SCRIPT}.log" > INSTDIR="`dirname $0`" ; cd > "${INSTDIR}" ; INSTDIR="`pwd`" > > [[ ! -d "${GAMEDIR}" ]] && mkdir -m > 0755 "${GAMEDIR}" > > JARPATH="patch.jar:RevengeOfTheTitans.jar:data-hib.jar:gfx.jar:fonts.jar:images.jar:music.jar:fx-mono.jar:fx-stereo.jar:gamecommerce.jar:common.jar:spgl-lite.jar:lwjgl.jar:lwjgl_util.jar:jorbis.jar:jinput.jar" > > # XMODIFIERS is cleared here to prevent SCIM screwing up keyboard > input XMODIFIERS= java \ > -noverify \ > -Djava.library.path="${INSTDIR}" \ > -Dorg.lwjgl.util.NoChecks=true \ > -Dorg.lwjgl.librarypath="${INSTDIR}" \ > -Dnet.puppygames.applet.Launcher.resources=/resources-hib.dat > \ > -Dnet.puppygames.applet.Game.gameResource=game.hib > \ > -XX:MaxGCPauseMillis=3 \ > -Xms64m \ > -Xmx375m \ > -Xincgc \ > -cp "${JARPATH}" \ > net.puppygames.applet.Launcher \ > "$@" \ > >"${LOGFILE}" 2>&1 > > exit 0 > > # > # EOF > # > ###############################################################################

  Read the article

• How do I enable the globalmenu / appmenu on XFCE?

  - by Johann Philipp Strathausen

  I have tried various tricks I could find to install the global menu on xfce and lxde on the latest oneiric, but nothing worked. Does anyone have an idea on how to do that? Thanks. Here's what I've tried so far: the gnome global menu panel plugin (for lucid) via the xfapplet plugin (not in the official repos anymore) that can embedd gnome plugins into the xfce panel - unfortunately, the globalmenu doesn't show up in the xfapplet list of available gnome plugins (there's only one item in it) all instructions from an older question about globalmenu and its duplicate compiling manually the latest version from gnome2-globalmenu there is another question along with a solution for XFCE 4.8, but it's not working on Oneiric. It is also proposing to install the global menu applet from gnome using it via xfapplet. I've even found an XFCE-plugin for the global menu, but it keeps crashing when I add it to the panel - also I could not install all the packages due to some unmet dependencies I've added some code to ~/.config/xfce4/xinitrc as described in 10. of the FAQ of gnome2-globalmenu though I'm not sure what effect this should have.

  Read the article

• Is my computer slow due to lack of swap

  - by Kristian Jensen

  A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

  Read the article

• How do I get my Lexmark x4650 printer working?

  - by Fallen Dohingy

  I think that my printer stopped working with the switch to gnome 3 or unity. Yes I have tried 32 and 64 bit os's. Here is the driver In order to actually install the driver, you need to extract it and then open up terminal and type sudo and then a space. Then drag the script into the terminal window. Here is what it said in the diver install window: Extracting file: printdriver.te Extracting file: lexmark-08z-series-driver-1.0-1.i386.deb Extracting file: launcher.c Extracting file: launcherfallendohingy@Ubuntu-Inspiron-15R:~$ sudo '/home/fallendohingy/Downloads/lexmark-08z-series-driver-1.0-1.i386.deb.sh' [sudo] password for fallendohingy: Verifying archive integrity... All good. Uncompressing nixstaller.............................................................. Collecting info for this system... Operating system: linux CPU Arch: x86_64 Warning: No installer for "x86_64" found, defaulting to x86... TRACKING IDENT = 170209 cpu speed = 2394 MHz ram size = 3762.69921875 MB hd avail = 74348 MB (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory /usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so Extracting file: lsbrowser Extracting file: lsusbdevice Using dpkg installation ============================= Execute: dpkg -i --force-architecture lexmark-08z-series-driver-1.0-1.i386.deb > /tmp/selfgz17540/pkg/files/dpkg_msgs ============================= ============================= Execute: rm lexmark-08z-series-driver-1.0-1.i386.deb ============================= ============================= Execute: /sbin/udevadm control --reload-rules ============================= Successfully installed the .deb Lexmark drivers.

  Read the article

• Ubuntu 12.04 LTS installation problem

  - by Zxy

  I am trying to install Ubuntu 12.04 LTS on my PC using WUBI. However, I keep getting this error: An error occured: *Error executing command >>command=C:\\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occured setting the element data. The request is not supported. >>stdout= For more information, please see the logfile:* Logfile: 06-11 10:57 DEBUG TaskList: ## Finished choose_disk_sizes 06-11 10:57 DEBUG TaskList: ## Running expand_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished expand_diskimage 06-11 10:59 DEBUG TaskList: ## Running create_swap_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished create_swap_diskimage 06-11 10:59 DEBUG TaskList: ## Running modify_bootloader... 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ### Running modify_bcd... 06-11 10:59 DEBUG WindowsBackend: modify_bcd Drive(C: hd 51255.1171875 mb free ntfs) 06-11 10:59 ERROR TaskList: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: # Cancelling tasklist 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 ERROR root: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ## Finished modify_bootloader 06-11 10:59 DEBUG TaskList: # Finished tasklist*

  Read the article

• How do I set a static DNS nameserver address on Ubuntu Server?

  - by Aleks

  I am trying statically to set DNS server addresses in my Ubuntu server running as virtual machine. I followed all recommendations on official Ubuntu support pages but I simply cannot get rid of my ISP's DNS servers set by DHCP. I assigned br0 interface on my host machine static IP address and eth0 on VM to use Google DNS and my own local DNS running on the second vm by setting it in /etc/network/interfaces. Tried to fiddle with head base and tail files in /etc/resolvconf/resolv.conf.d/ and tried to shuffle interface-order in /etc/resolvconf/interface-order but when I restarted network service I got the ISP's DNS addresses back every time. Is there a way that I can disable resolvconf and set up my resolv.conf file manually as I always did on Red Hat? Or at can you tell me which hook script keeps putting ISP DNSs in resolv.conf? My ISP don't allow me to change DHCP settings on my router so I cannot do it that way. Why is such a simple thing such as setting DNS servers got so complicated???

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >