Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 193/1359 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Sony Vaio Webcam

  - by Martin H

  I have a in-built webcam in my Sony Vaio VGN-FE21M. lsusb shows me the device Bus 001 Device 003: ID 0ac8:c002 Z-Star Microelectronics Corp. Visual Communication Camera VGP-VCC1 and it is working within Skype most of the time. Sometimes, however, lsusb shows me the exact same output, but trying to test my cam in v4l2ucp I get the error Unable to open file /dev/video0 No such file or directory A reboot fixes the problem but I just can't pinpoint what the difference is between a working and a not working webcam and the time/instance this occurs. It would probably be a fix if i could unmount and remount the cam, but how can I do this with in-built devices? Any other advice is welcome as well.

  Read the article

• installation problems while installing modelsim6.5f in ubuntu11.10

  - by rakesh

  the following errors are occuring while installing modelsim6.5f in ubuntu11.10 rakeshnettem@rakeshnettem-MacBookPro:~/Desktop/modelSE6.5flinux$ sudo apt-get install install.linux Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package install.linux E: Couldn't find any package by regex 'install.linux' rakeshnettem@rakeshnettem-MacBookPro:~/Desktop/modelSE6.5flinux$ please helpme as soonas possible

  Read the article

• Compiz not drawing window controls in ubuntu 11.10

  - by Siva Prasad Varma

  I have recently installed driver for my ATI graphic card in my Dell Studio laptop. I have also read this somewhere on the web that Ubuntu enables compiz window manager by default if your hardware can run it. Is it true ? In my case before Installing graphic card driver the window manager was Metacity, but now I have compiz as my Window manager. I found this out uisng Displex Indicator applet also confirmed by wmctrl -m. From the time I have installed graphic card drivers, the window manager(Compiz) is not drawing window control buttons for some of the windows. For example if I open a terminal I have to close it using key board shortcuts or use the File - Quit option in app-menu. Also I am not able to move the window because of this. From then when-ever I find a window without window control buttons I am restarting the window manager using Displex Indicator applet. But this is very annoying and also consumes a lot of time(when I am doing my work). Can any one suggest any solution for this. What are up's and down's of using Compiz Vs Metacity.

  Read the article

• How to create (via installer script) a task that will install my bash script so it runs on DE startup?

  - by MountainX

  I've been reading for the last couple hours about Upstart, .xinitrc, .xsessions, rc.local, /etc/init.d/, /etc/xdg/autostart, @reboot in crontab and so many other things that I'm totally confused! Here is my bash script. It should start/run after the desktop environment is started and it should continue to run at all times until logout/shutdown. It should start again on reboot. Any time the DE is running, it should run. #!/bin/bash while true; do if [[ -s ~/.updateNotification.txt ]]; then read MSG < ~/.updateNotification.txt kdialog --title 'The software has been updated' --msgbox "$MSG" cat /dev/null > ~/.updateNotification.txt fi sleep 3600 done exit 0 I know zero about using Upstart, but I understand that Upstart is one way to handle this. I'll consider other approaches but most of the things I've been reading about are too complex for me. Furthermore, I can't figure out which approach will meet my requirements (which I'll detail below). There are two steps in my question: How to automatically start the script above, as described above. How to "install" that Upstart task via a bash script (i.e., my "installer"). I assume (or hope) that step 2 is almost trivial once I understand step 1. I have to support all flavors of Ubuntu desktops. Therefore, the kdialog call above will be replaced. I'm considering easybashgui for this. (Or I could use zenity on gnome DE's.) My requirements are: The setup process (installation) must be done via a bash script. I cannot use the GUI method described in the Ubuntu doc AddingProgramToSessionStartup, for example. I must be able to script/automate the setup (installing) process using bash. Currently, it is as simple as having the bash installer script copy the above script into /home/$USER/.kde/Autostart/ The setup process must be universal across Ubuntu derivatives including Unity and KDE and gnome desktops. The same setup script (installer) should run on Linux Mint, Kubuntu, Xbuntu (basically any flavor of Ubuntu and major derivatives such as Linux Mint). For example, we cannot continue to put a script file in /home/$USER/.kde/Autostart/ because that exists only on KDE. The above script should work for each of the limited flavors we use. Hence our interest in using easybashgui instead of kdialog or zenity. See below. The installed monitoring script should only be started after the desktop is started since it will display a GUI message to the user if the update is found. The monitoring script (above) should run without root privileges, of course. But the installer (bash script) can be run as root. I'm not a real developer or a sysadmin. This is a part time volunteer thing for me, so it needs to be easy/simple. I can write bash scripts and I can program a little, but I know nothing about Upstart or systemd, for example. And, unfortunately, my job doesn't give me time to become an expert on init systems or much of anything else related to development and sysadmin. So I have to stick with simple solutions. The easybashgui version of the script might look like this: #!/bin/bash source easybashgui while true; do if [[ -s ~/.updateNotification.txt ]]; then read MSG < ~/.updateNotification.txt message "$MSG" cat /dev/null > ~/.updateNotification.txt fi sleep 3600 done exit 0

  Read the article

• How can I add the softwares I have installed from USC of kubuntu 12.04 into kubuntu 12.10 iso installation file

  - by Suhail cholassery

  I am currently using Kubuntu 12.04. I don't have strong high speed Internet connection and managed to get Kubuntu 12.10. I found that it's size is about 1GB. I have a lot of softwares installed in my current Kubuntu 12.04 via Ubuntu Software Center I would like to Add these software to Kubuntu 12.10 installation iso file. I don't want to download packages from Ubuntu customization kit (UCK) or similar software. I don't prefer using APTonCD or similar software. What I want is to add these software into this Kubuntu 12.10, so that they appear along with the default application which will be installed as default when the OS is installed. Is this possible?

  Read the article

• how do i run teamviewer in a headless system?

  - by Serge

  im really new to ubuntu 12.04 and ive been trying to get remote desktop services between me and my server. and i dont have any spare monitors, keyboards, or mice. i did connect said items too the server and got teamviewer running and connected. but i cant use those components every time i want to go remote desktop. i have ssh but i want a GUI on hand for annoying stressful situations. i read somewhere that ubuntu doesnt start a gui if there is no monitor connected. and tried those xorg.conf setups to no avail. i believe this is the reason why my headlesds setup isnt working. how can i get my GUI to startup while headless?

  Read the article

• Can I blacklist an appindicator?

  - by d3vid

  I've whitelisted some indicators for apps that don't yet have Unity-compliant appindicators. Is there any way to blacklist appindicators for apps that are Unity-compliant (not old-style indicators) but don't provide a "Don't show in the system tray" option? Any solutions to ban an appindicator from being displayed, GUI- or CLI-based, are welcome. (I'm not looking for a way to just hide them like you can hide system tray icons in Windows.) (New-style appindicators can't be removed from the systray-whitelist.)

  Read the article

• Ubuntu 12.04 LTS installation problem

  - by Zxy

  I am trying to install Ubuntu 12.04 LTS on my PC using WUBI. However, I keep getting this error: An error occured: *Error executing command >>command=C:\\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occured setting the element data. The request is not supported. >>stdout= For more information, please see the logfile:* Logfile: 06-11 10:57 DEBUG TaskList: ## Finished choose_disk_sizes 06-11 10:57 DEBUG TaskList: ## Running expand_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished expand_diskimage 06-11 10:59 DEBUG TaskList: ## Running create_swap_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished create_swap_diskimage 06-11 10:59 DEBUG TaskList: ## Running modify_bootloader... 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ### Running modify_bcd... 06-11 10:59 DEBUG WindowsBackend: modify_bcd Drive(C: hd 51255.1171875 mb free ntfs) 06-11 10:59 ERROR TaskList: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: # Cancelling tasklist 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 ERROR root: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ## Finished modify_bootloader 06-11 10:59 DEBUG TaskList: # Finished tasklist*

  Read the article

• Let the RAM improves performance

  - by user1717079

  I have a low profile machine but with a lot of fast RAM, 4 Gb, which is really an amount of memory that i probably will never use, not even an half, since i just use this machine for coding and browsing the web. The HDD is really slow and so the overall performance are bad when booting, caching or starting new program, I'm wondering if Ubuntu can provide some setting or utility to solve this situation and let my system rely more on the RAM usage.

  Read the article

• Can't specify window's class in CCSM's Place Windows

  - by Anto

  Following this method, I wanted to "place" some of my windows on specific viewports. For instance, I want Xchat to always start on my top right viewport (x=2, y=1). But after I have set everything up and clicked the "Close" button to validate it (I don't have any other action button, like "OK" or "Apply"), the only thing that get saved up are the viewport X and Y coordinates. The window class (in my case class=Xchat) remains empty. This bug only occurs in the "Windows with fixed viewport" section; it works well in the "Windows with fixed placement mode", for instance. How can I solve or circumvent this issue ?

  Read the article

• C or assembly code to find current cpu core speed

  - by honestann

  How can my application efficiently determine the following information peroidically while it executes: 1: current speed of each of the 8 CPU cores. 2: which core the code is currently executing on. My application is C and assembly-language, so any solution in either C or assembly-language is fine. This code needs to execute quickly, so creating, reading and processing a file generated by "cat /proc/cpuinfo" is much too slow. The cores slow-down and speed-up automatically, probably to keep CPU temperature under control. Therefore, a one-time measure is not sufficient for my purposes. My application already reads and subtracts the cpu cycle counter in assembly language to determine number of clock cycles, but my program cannot compute elapsed time in nanoseconds unless it knows the current clock frequency of the cpu cores (and which core the code is executing on). Thanks!

  Read the article

• Why is my WordPress installation unable to create a directory?

  - by Ankur

  I am a new user of Ubuntu 12.04 64 bit and I want to test WordPress on my local PC installation. I've only installed LAMP and the latest version of WordPress for now. Further actions were creating a directory www in /home, i.e /home/www install wordpress in it. changed Apache to use /home/www instead of /var/www Apache is running smoothly & wordpress seems to be so as well. However, if try to change my background of my wordpress blog it throws an error Unable to create directory wp-content/uploads/2012/12. Is its parent directory writable by the server? Plese help me to resolve my problem.

  Read the article

• Unmet dependencies when trying to install openssh-server

  - by Sabiya

  I am running sudo-apt get install openssh-server on Ubuntu 12.04 64 bit system. It is giving me the following output. $ sudo apt-get install openssh-server Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: gcc-4.6 : Depends: libgcc1 (>= 1:4.6.3-1ubuntu5) but 1:4.6.2-14ubuntu2 is to be installed libc6 : Depends: libc-bin (= 2.15-0ubuntu10.1) libc6-dev : Depends: libc6 (= 2.15-0ubuntu10) but 2.15-0ubuntu10.1 is to be installed libgcc1 : Depends: gcc-4.6-base (= 4.6.2-14ubuntu2) but 4.6.3-1ubuntu5 is to be installed libxplc0.3.13:i386 : Depends: libc6:i386 (>= 2.5-5) but it is not going to be installed Depends: libgcc1:i386 (>= 1:4.2-20070516) but it is not going to be installed Depends: libstdc++6:i386 (>= 4.2-20070516) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

  Read the article

• I have 6 updates that won't install on Ubuntu 12.04?

  - by Taylor

  I'm an Ubuntu novice, so any help here is greatly appreciated! I'm running Ubuntu 12.04, and I have six updates that just won't install. I've tried Update Manger, sudo apt-get upgrade, and sudo apt-get update. Nothing has worked so far. Here are the details I get from Update Manager: installArchives() failed: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... No apport report written because MaxReports is reached already Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3685 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev:No apport report written because MaxReports is reached already fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic-pae linux-image-3.2.0-27-generic-pae linux-image-3.2.0-29-generic-pae udev xserver-xorg-core fglrx fglrx-amdcccle linux-image-generic-pae linux-generic-pae xserver-xorg-video-intel fglrx-dev Error in function: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3782 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured

  Read the article

• Make Network Manager use bridge for PPPoE instead of only working on ethernet?

  - by Azendale

  My ISP uses PPPoE on their DSL connections. I use Network Manager to connect to this using a bridged modem connected to eth0. Often, I want to test networking things, so a set myself up a KVM machine with a tap interface. I can then connect these interfaces to to virtual 'switches' by adding them to bridges. (I work for my ISP). Sometimes, I want to test cases where the PPPoE is connected more than once. For this, I would like to be able to add eth0 to my 'switch' (a bridge) so the VMs can have a 'bridged modem' connection to the internet. But I would like to still be able to run the PPPoE for my computer at the same time. Which means that I need to get network-manager to run PPPoE over the bridge (or eth0). The problem is that it considers eth0 (and the bridge) 'not managed' by network manager, so it refuses to use it. So, how can I have network manager dial PPPoE over a bridge?

  Read the article

• Performance Overhead of Encrypted /home

  - by SabreWolfy

  I have a netbook with Windows on the second partition and Xubuntu (/ and /home) on the third partition. I selected to encrypt my home folder during installation. The performance of the netbook is adequate for the small machine that it is, but I'm looking to improve performance. I could not find much information about the overhead (CPU or drive) associated with home partition encryption. I ran the following, writing to my home partition as well as the the mounted Windows partition: dd if=/dev/zero of=~/dummy bs=512 count=10240 dd if=/dev/zero of=/media/Windows/dummy bs=512 count=10240 The first returned 2.4MB/s and the second returned 2.5MB/s. Can I therefore deduce that there is very little overhead to home folder encryption? I'm not sure if the different filesystems will make any difference (/ and /home are ext3). Update 1 I don't know why I didn't use /tmp instead of the mounted Windows folder. Only /home is encrypted, so /tmp is unencrypted ext3. The results of the dd as above are astounding: ~: 2.4 MB/s /tmp: 42.6 MB/s Comments please? The reason I am asking this is that disk access on the netbook is noticeably slow. Update 2 I timed each of the dd operations with time: ~: real 0m2.217s user 0m0.028s sys 0m2.176s /tmp: real 0m0.152s user 0m0.012s sys 0m0.136s See also: discussion on UbuntuForums.org and bug report Edit: Output of mount: /dev/sda3 on / type ext3 (rw,noatime,errors=remount-ro,user_xattr,commit=600) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/USER/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=USER) `

  Read the article

• How do I list installed software with the installed size?

  - by Lewis Goddard

  I would like to have a list the installed software on my machine, with the disk space consumed by them alongside. I would prefer to be able to order by largest/smallest, but that is not a necessity. I am the sort of person who will install software to try it, and never clean up after myself. As a result, my 7GB (Windows and my Data are on separate partitions, as well as a swap area) Ubuntu 11.04 partition is suffering, and has started regularly showing warning messages. I have cleaned my browser cache, as well as everything under Package Cleaner in Ubuntu Tweak, and am left with 149.81 MB off free space.

  Read the article

• Tor check failed though Vidalia shows green onion

  - by Wolter Hellmund

  I have installed tor successfully and Vidalia shows it is running without problems; however, when I check if I am using tor in this website I get an error message saying I am not using tor. I have tried two things to fix this: I installed ProxySwitchy on Google Chrome, and created a profile for Tor (with address 127.0.0.1, port 8118), but enabling the proxy doesn't change the results in the tor check website linked before. I changed my network proxy settings through System Settings Network from None to Manual, and selected as address always 127.0.0.1 and as port 8118 for all but for the socket, for which I entered 9050 instead. This makes internet stop working completely. How can I fix this problem?

  Read the article

• Django 1.4 dependency when packaging a Precise application

  - by Caustic

  I am trying to package a program I wrote that depends on Django 1.4.1 in Ubuntu 12.04. As Django 1.4.1 isn't available in Precise I am wondering if it is best to: Package up Django 1.4.1 and drop it in my ppa OR write a script that wgets Django at build time and installs. OR Something better that I haven't thought of. I am still inexperienced with packaging and would appreciate some advice Thanks

  Read the article

• 12.04 - Connecting Acer X203H monitor to new Dell XPS 15z laptop

  - by Lucy Dixon

  I have installed the latest version of Ubuntu (12.04) on my boyfriend's new Dell XPS 15z laptop. He uses a Microsoft wireless keyboard and mouse, and an Acer X203H monitor with his set-up. No problems with the keyboard or mouse, or with connecting the HP printer, but we just can't get the laptop to talk to the Acer monitor. With his old setup he used a VGA cable to connect machine & monitor. New laptop has no VGA port, but we've bought a VGA to HDMI adaptor to connect to the laptop. Have tried using Fn F2 to change the display from laptop to monitor, but it doesn't see the monitor at all. HELP! Is there a driver I can install from somewhere? Or how can I tell Ubuntu to look for the monitor on another port? Completely in the dark, and about to get in trouble!! Thanks

  Read the article

• ALT+SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick

  - by Andrei

  I'm trying ALT+SysRq+REISUB to see how it would be used to restart my system safely in case of emergency. However, I find that ALT+SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick. All other SysRq combinations appear to work correctly (i.e. ALT+SysRq+REISU). cat /proc/sys/kernel/sysrq returns 0. But I'm not sure it's relevant because ALT+SysRq certainly works. What can I do to have "B" actually restart the system? Thanks!

  Read the article

• Lubuntu: neither shut-down nor restart works

  - by Rantanplan

  aI have a freshly installed Lubuntu 14.04.1 (installed with forcepae option on a laptop with Pentium M processor). The only problem that I have found so far is that I cannot shut-down or restart the laptop. It always continues showing "Lubuntu" and some dots. Pressing Esc it says wait-for-state stop/waiting * Stopping rsync daemon rsync [OK] * Asking all remaining processes to terminate… [OK] * Killing all remaining processes… [fail] ModemManager [597] : <info> Caught signal, shutting down… ModemManager [597] : <info> ModemManager is shut down nm-dispatcher.action: Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. * Deactivating swap… [OK] * Will now halt The cursor remains blinking but the only way to switch it off is to hold the power-off key pressed for some seconds. I tried sudo shutdown -h now, sudo halt and sudo poweroff resulting in the same problem. I also tried to add acpi=force in GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" in /etc/default/grub and run sudo update-grub; then, using the taskbar's shot-down button lead to a direct stop of the laptop equal to holding the power-off key pressed for some seconds. Next I followed the answer http://askubuntu.com/a/202481/288322. Now, I directly receive some messages during shut-down starting wait-for-state stop/waiting * Stopping rsync daemon rsync [OK] * Asking all remaining processes to terminate… [OK] [ 240.944277] INFO: task kworker/0:2:24: block for more than 120 seconds. [ 240.944461] Tainted: G S 3.13.0-34-generic #60-Ubuntu [ 240.944623] "echo 0 > /proc/sys/kernel/hung_tasks_timeout_secs" disables this message. followed by some more similar lines and then: * Killing all remaining processes… [fail] ModemManager [576] : <info> Caught signal, shutting down… nm-dispatcher.action: Caught signal 15, shutting down... ModemManager [576] : <info> ModemManager is shut down * Deactivating swap… [OK] * Will now halt [ 600.944276] INFO: task kworker/0:2:24: block for more than 120 seconds. [ 600.944458] Tainted: G S 3.13.0-34-generic #60-Ubuntu [ 600.944619] "echo 0 > /proc/sys/kernel/hung_tasks_timeout_secs" disables this message. Then, nothing more was coming during the next 5 minutes. If you know where can I find relevant error information, I will be happy to search for them.

  Read the article

• Cannot delete .Trash-503 directory, returns a $RECYCLE.BIN.trashinfo: Input/output error

  - by Parto

  I cannot delete .Trash-503 folder via GUI or terminal, it returns a $RECYCLE.BIN.trashinfo: Input/output error Not even sudo rm -r or even a simple ls works in that trash directory. Check terminal output below: subroot@subroot:~$ cd /media/xxxxx/ subroot@subroot:/media/xxxxx$ rm .Trash-503/ rm: cannot remove `.Trash-503/': Is a directory subroot@subroot:/media/xxxxx$ rm -r .Trash-503/ rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error rm: cannot remove `.Trash-503/info': Directory not empty subroot@subroot:/media/xxxxx$ sudo rm -r .Trash-503/ [sudo] password for subroot: rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error subroot@subroot:/media/xxxxx$ cd .Trash-503/ subroot@subroot:/media/xxxxx/.Trash-503$ ls info subroot@subroot:/media/xxxxx/.Trash-503$ cd info/ subroot@subroot:/media/xxxxx/.Trash-503/info$ ls ls: cannot access $RECYCLE.BIN.trashinfo: Input/output error ls: cannot access found.000.trashinfo: Input/output error found.000.trashinfo $RECYCLE.BIN.trashinfo subroot@subroot:/media/xxxxx/.Trash-503/info$ What's going on here and how can I delete this folder? EDIT I tried checking and repairing the partition using gparted only to get this error message: ERROR: Filesystem check failed! ERROR: 264 clusters are referenced multiple times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired. I don't have windows installed, how can I run chkdsk /f from ubuntu?

  Read the article

• Wired Network not working on Ubuntu 11.10 + Strange Behavior with Manual Conf

  - by Mauricio Cruz

  I'm new to Ubuntu - to be honest this is my very first day trying it... and I've already spent hours trying to make my wired connection work. I've been using this wired network with Windows and OSX, and in both systems I also had some trouble trying to connect in the past (and the troubleshooters did their magic and helped me get connected). Today, this is what I got: I'm running Ubuntu 11.10; ifconfig: eth0 Link encap:Ethernet HWaddr 78:2b:cb:c3:bf:8f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:343 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:70 (70.0 B) TX bytes:63273 (63.2 KB) Interrupt:20 Memory:e2e00000-e2e20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1859 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:149368 (149.3 KB) TX bytes:149368 (149.3 KB) wlan0 Link encap:Ethernet HWaddr 10:0b:a9:82:55:c0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:15484 errors:0 dropped:0 overruns:0 frame:0 TX packets:16871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12048377 (12.0 MB) TX bytes:2677679 (2.6 MB) I also have some information from Windows ipconfig /all that I ran at my friend's machine Ipv6 Address: <address> preferential Ipv4 Address: 172.26.65.23 <preferential> Netmask: 255.255.254.0 Default Gateway: 172.26.64.1 DHCP Server : <address> DNS Servers : <address> DNS Suffix : <suffix> The weird thing is that I've tried to configure everything manually, using "Network Connections". When I add everything inside IPv4 Settings, the connection is finally successful, but only for 4~5 seconds before getting disconnected again... Update:I just changed the Connection Method to "Local-Link Only", and the same described above happens: At first, it says "Connection Stablished", but after a few seconds, the wired network gets disconnected. I hope someone can help me get connected! Thanks!

  Read the article

• ldap client cannot contact ldap server

  - by Van

  I have followed these instructions: https://help.ubuntu.com/12.04/serverguide/openldap-server.html#openldap-auth-config The ldap server works fine. I can log into it using an ldap account. However, I configured another Ubuntu 12.04 server as a ldap client for authentication but I cannot contact the server. Here is the error: On the client: # ldapsearch -Q -LLL -Y EXTERNAL -H ldapi://ldap01.domain.local -b cn=config dn ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) The server can receive requests: On the client: # telnet ldap01.domain.local 389 Trying 10.3.17.10... Connected to sisn01.domain.local. Escape character is '^]'. On the client: # ldapsearch -x -h ldap01.domain.local -b cn=config dn # extended LDIF # # LDAPv3 # base <cn=config> with scope subtree # filter: (objectclass=*) # requesting: dn # # search result search: 2 result: 32 No such object # numResponses: 1 On the server: # ps aux | grep slapd openldap 3759 0.0 0.2 564820 8228 ? Ssl 08:39 0:00 /usr/sbin/slapd -h ldap:/// ldapi:/// -g openldap -u openldap -F /etc/ldap/slapd.d I suspect I am missing a configuration parameter either on the server or on the client. I just cannot figure out what. Any help here would be appreciated.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >