Search Results

Search found 9608 results on 385 pages for 'flash drives'.

Page 192/385 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

  • Simultaneous read/write to RAID array slows server to a crawl

    - by Jeff Leyser
    Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

    Read the article

  • What's the best external hard drive configuration for a software developer laptop?

    - by Dan
    I've got a Dell laptop that I use as a software developer box at work and find that the drive is usually the bottleneck. I'd like to hook up two 10k RPM drives that are striped for performance. I've looked for drive cases with RAID but there don't seem to be very many choices and I'm worried about compatibility with the drives (preferably SATA 2). Also I don't have a SATA connection on my machine so it'll have to USB 2.0 for now. Am I headed down the right path or am I missing a much simpler configuration?

    Read the article

  • Email alerts when hard drive fails on a Dell PowerEdge 2950 (PERC5I, SAS)?

    - by BigJoe714
    I recently purchased a used Dell PowerEdge 2950. I setup the hard drives in RAID-5 configuration. I want to be able to get an email alert if one of the drives fails. I have been trying to determine what the easiest way to setup an email alert would be. The controller card is listed as PERC5I, SAS PowerEdge. From my numerous Google searches, it looks like I need to install Dell OpenManage Essentials. However ,this looks to be a giant application with tons of bells & whistles for managing many servers, when all I really want is something for this one server. Can anyone offer me any insight into what I could do?

    Read the article

  • What is "2LUN" mode in connection with RAID?

    - by naxa
    I've came across RAID products that also list JBOD (just a bunch of disks) mode and 2LUN mode. What the heck is 2LUN mode? I could not find a description; the closest thing seems to be LUN 'logical unit number' but I don't get the 2LUN thing. UPDATE 1 This is what Wikipedia has to say about JBOD: JBOD (derived from "just a bunch of disks"): an architecture involving multiple hard drives, while making them accessible either as independent hard drives, or as a combined (spanned) single logical volume with no actual RAID functionality. So JBOD can actually mean two different (albeit related) things. Answer of Guest says 2LUN means no spanning. Does this suggest that 2LUN would simply mean the JBOD-variant with no span?

    Read the article

  • NVRAM for journals on Linux?

    - by symcbean
    I've been thinking about ways of speeding up disk I/O, and one of the bottlenecks I keep coming back to is the journal. There's an obvious benefit to using an SSD for the journal - over and above just write caching unless of course I just disable the journal with the write cache (after all devicemapper doesn't seem to support barriers). In order to get the benefits from using a BB write cache on the controller, then I'd need to disable journalling - but then the OS should try to fsck the system after an outage. Of course if the OS knows what's in the batter-backed memory then it could use it as the journal - but that means it must be exposed as a block device and only be under the control of the operating system. However I've not been able to find a suitable low-cost device (no, write-levelling for Flash is not adequate for a journal, at least one which uses Smartmedia). While there's no end of flash devices, disk/array controllers with BB write caches, so far I've not found anything which just gives me non-volatile memory addressable as a block storage device.

    Read the article

  • Weird graphical artefacts on OS X Snow Leopard.

    - by Debilski
    Since a couple of days I experience some strange graphical artefacts on Snow Leopard. Usually after a certain uptime, the background image would show some strange colours at some place. This could be reverted by reloading the background image. But the problem would appear again after rebooting (and waiting for an indefinite time). Sometimes, the shadow of windows would also have some artefacts; and this time the application switcher is completely distorted. Any ideas where I need to search for a solution of the problem? Edit: Model: MacBook Gen. 3.1 / all updates installed Update: After not having used Safari for a while, the problem has not occurred anymore (at least not after 20 days of uptime). Could well be that the problem had its origin in Safari or a Safari-related plugin. (Possibly Flash or Click-to-Flash as it did not happen with both deactivated, though the running time with this configuration might have been to short to be of any validity.)

    Read the article

  • Computer Studdering When Transferring Over Network

    - by Nalandial
    This is a really weird problem that I've never even seen before. When I copy to or from my server share, my computer studders terribly and the data transfers very slowly at only around 12MB/s. By studdering I mean the mouse skips around and all my applications respond very slowly; as soon as I cancel the transfer it resolves immediately. I looked at Task Manager and the CPU is only at ~35% with plenty of RAM free. This only started semi-recently; before, I had no problems and the transfer speed maxed out the gigabit connection. I have two hard drives in my computer. When I try transferring files between drives it's fine, but when I copy from the share to either drive or to it from either drive, I get studdering. I'm running Windows 7 x64. Anyone have any idea what's going on? Any help would be much appreciated.

    Read the article

  • Removing RAID on a DELL power-edge server

    - by Simon Callan
    We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

    Read the article

  • Custom firmware for Asus WL-520g

    - by Jaroslav Záruba
    What custom firmware works with Asus WL-520g? (Note this is not 520gU, 520gC, etc.) I failed to flash it with Tomato (Tomato_1_28_ND.zip) - the admin UI does not accept the file, and when trying to tftp the file as adviced for 520gU all I get is this: Transfering file tomato-ND.trx to server in octet mode... Error occurred during the file transfer (Error code = 0): Error in SendPacket() call. I just saved the router form rather unsuccessful flash to DD-WRT (after few hours the router fell into coma), and I'd like to keep it as a backup should the new one die or whatever. (Unfortunately the stock firmware does not support WOL.)

    Read the article

  • Supermicro SmartOS setup issue with HDDs

    - by Andrew B.
    I'm trying to setup SmartOS on my new Supermicro server (SYS-6027R-N3RF4+). I have 8 HDDs + 2 SSDs installed in the hot-swappable drive bays. I have not configured the Intel RAID controller on the machine (it shows no RAID configured, and lists all 8 HDDs). When I boot SmartOS from my USB key for the first time and get to the initial zpool creation I only see 2 disks listed. How can I tell which two drives are being referenced? How can I get SmartOS to recognize all 8+2 drives? Is there a BIOS setting I need to adjust?

    Read the article

  • Will Software RAID And iSCSI Work For A SAN

    - by Justin
    I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

    Read the article

  • Windows Home Server backup recovery missing driver for USB Device

    - by Pat James
    I'm doing a backup recovery of a Windows 7 PC from the backup on Windows Home Server. I've done this before and am accustomed to the prompt to load drivers for devices such as the NIC from a USB flash drive, which I have all loaded up with the drivers from the special folder in the WHS backup repository for this PC. My problem on this PC is that one of the drivers the recovery CD complains is missing is "USB Device", and it fails to find the drivers when I click the button to scan for and install drivers. So it seems it can't access the USB flash drive to load the other drivers. Any suggestions? I think my next step is to pull a DVD drive from another system and plug it in with a CD burned with the device drivers.

    Read the article

  • Why many applications close after opening a document or doing a specific actions?

    - by Mohsen Farjami
    I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

    Read the article

  • ZFS: RAIDZ versus stripe with ditto blocks

    - by RandomInsano
    I'm going to build a ZFS file server from FreeBSD. I learned recently that I can't expand a RAIDZ udev once it's part of the pool. That's a problem since I'm a home user and will probably add one disk a year tops. But what if I set copies=3 against my entire pool and just throw individual drives into the pool separated? I've read somewheres that the copies will try and distribute across drives if possible. Is there a guarantee there? I really just want protection from bit rot and drive failure on the cheap. Speed's not an issue since it'll go over a 1Gb network and at MOST stream 720p podcasts. Would my data be guaranteed safe from a single drive failure? Are there things I'm not considering? Any and all input is appreciated.

    Read the article

  • is a mini PCIe SSD worth it?

    - by Narcolapser
    Question: Is getting a mini-PCIe worth investing in? Info: I have a an Acer Aspire 1 n270. It has this mini PCIe slot that is just sitting there empty. I would like to change this, and I would like to speed up my boot time. So I've been considering getting a mini-PCIe SSD. They are about the same price as faster same size drives of the 2.5" variation. The advantage of the mini-PCIe card is that I can have my HDD still. So I have good boot time, but still have the storage of my HDD. What I want to know is: will this allow me to spin down the HDD more often allowing me to save power? Will the OS (Ubuntu 10.04 LTS) see them as separate drives? Is there anything that the mini-PCIe slot could be better used for? Thanks. ~n

    Read the article

  • Can a Double-Density Floppy drive be swapped out for a High-Density drive?

    - by Ben
    I'm trying to fix the floppy drive in my Roland MC-500. The floppy drive inside is a Matsushita DDF3-1 which doesn't seem to be in production anymore. The DDF3-2 is still available, however it is an HD drive. Does anyone know off the top of their heads if there is any issue with simply swapping the two drives? Could the power usage be different on the drives? Since the machine is expecting a 720k DD drive, are there any jumper settings to have the HD drive function as a DD drive?

    Read the article

  • Virtualizing OpenSolaris with physical disks

    - by Fionna Davids
    I currently have a OpenSolaris installation with a ~1Tb RaidZ volume made up of 3 500Gb hard drives. This is on commodity hardware (ASUS NVIDIA based board on Intel Core 2). I'm wondering whether anyone knows if XenServer or Oracle VM can be used to install 2009.06 and get given physical access to the three SATA drives so that I can continue to use the zpool and be able to use the Xen bits for other areas. I'm thinking of installing the JeOS version of OpenSolaris, have it manage just my ZFS volume and some other stuff for work(4GB), then have a Windows(2GB) and Linux(1GB) VM (theres 8Gb RAM on that box) virtualised for testing things. Currently I am using VirtualBox installed on OpenSolaris for the Windows and Linux testing but wondered if the above was a better alternative. Essentially, 3 Disks - OpenSolaris Guest VM, it loads the zpool and offers it to the other VMs via CIFS.

    Read the article

  • administraitor denies command prompt

    - by roxas383
    I looked at the command prompt faqs on this webiste and tried to get me to make a new profile but when i went to open it it said "The command prompt has been disabled by your administraitor-click any key to countinue" and when i do it closes which i knew that was going to happen. Is there someway i can stop the admin from blocking my command prompt? oh and i was at school too (Dont know if this helps but i am in the West Allis West Milwaukee school district). Also, is there a way i can hack into the blocking program for my school at all? I don't remember what the program is but it might have to do with vision? I'm not sure but it would be greatly appreciated if someone could help (could i download a program on a flash drive that denies any blocking and/or disabling SafeSearch and plug it in into a computer at my school and use it from the flash drive? Would the school blocking thingy deny it from working?) HELP ME PLEASE!!!!!!!!!

    Read the article

  • Adaptec 5805 not recognized after reboot

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

    Read the article

  • install grub on pendrive containing linux installation, making it system independent

    - by arpit
    i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

    Read the article

  • Operative systems on SD cards

    - by HisDudeness
    I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

    Read the article

  • Hide Drive / Avoid Low Diskspace Warning on ReadyBoost Cache?

    - by Simon Richter
    I've just added an SSD as a ReadyBoost cache drive, and have two minor cosmetic issues with it: the drive still shows up in the drive list I get a warning balloon every five minutes that the drive is full and that I should empty the Recycle Bin. The former is ignorable (and I guess I can solve it with a group policy); the latter is somewhat going on my nerves. Are there official buttons "hide ReadyBoost drives" and "do not warn on low diskspace for ReadyBoost drives" somewhere that I may have missed? If not, I guess I can use the group policy to hide the drive; I'd still need a way for the system to not warn about the drive being full. Also, am I right that I need to assign a drive letter and format the drive with NTFS to use it for ReadyBoost, or is there a way to just use the raw device?

    Read the article

  • MDADM RAID5 array showing as CLEAN FAULTY

    - by Dean Reilly
    A drive dropped out of my raid 5 array yesterday. It looks like the reason was due to a bad controller so I switched it out and attempted to re-add the drive but mdadm claimed it couldn't do it. So I zerod the superblock and just added the drive normally and left it to resync. When I came to check on the array this morning I was unable to mount it at all and it's now showing as CLEAN FAULTY with two drives missing. The two missing drives are listed as spare and faulty spare. Is there anything I can do in this situation or is the array gone?

    Read the article

  • What Commands Does Windows Startup Repair Run?

    - by user138284
    Background: I created a wim image that we are planning to deploy to some of our computers, but when I image a computer with it from a flash drive it continually reports that the BOOTMGR is missing (and no, it's not booting off the flash drive). I am able to resolve this by running Windows Startup Repair, but I would rather just add whatever command is resolving the issue to a script that runs after the image. I have already tried running fixmbr, fixboot, rebuildbcd, and nt60, but none of those resolve the issue. Basically, I would like to know what exactly is being done when I run Windows Startup Repair.

    Read the article

  • update ocz vertex le capacity via firmware update

    - by Ben Voigt
    I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

    Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >