Search Results

Search found 9608 results on 385 pages for 'flash drives'.

Page 196/385 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• Make exact copy of USB stick [closed]

  - by Andrius Palivonas

  There's this school software on a USB drive. It only runs, when the stick they gave is plugged in. Cloning the drive with dd command didn't work. I'm guessing it checks the hardware ID of the flash drive. Is there any way to change drives information? I guess not, but is it possible to create a virtual flash drive with exactly same hardware id and all other read-only information that the software is most probably checking. EDIT: The paper math books we have dont' have answers. So when I'm doing homework I have no idea if did it right. The electronic version does have the answers. The publisher didn't put them into paper version because of simple reason - money. They would have to republish the book if some answers are found to be wrong. So I feel no shame trying to pirate that software, because publishers are ruining our math education.

  Read the article

• What could be causing LVM errors on first boot after install in Debian?

  - by ianfuture

  Hi, I've installed Debian (lenny) on a machine at home. It was set up during install to have a /boot partition, then the rest was encrypted, then had an LVM ontop of that, then all the other partitons inside LVM. After install completed and on first boot it asked for password to un-encrypt(same password for both drives) then it showed an error which said LVM could not find a physical device with a particular UUID or something similar. LVM install is over two HDs. One is 120GB and one 40GB. 120GB is Master on its IDE cable and this has /boot on it. 40GB is slave on the other IDE cable. Is there anything that could be done to rescue this install? Or diagnose problem? It took ages to get installed due to time spent enrypting drives and I'd rather not go through that again. :( Thanks.. Ian

  Read the article

• Clearing Windows file share "memory"

  - by Tom Shaw

  I'm currently upgrading a Samba file server (from 3.0.23d to 3.4.3). I have a problem on the Windows client side: if the client was accessing a UNC path or mapped drive from the Samba server before the upgrade, then after the upgrade those paths or drives are not accessible. However, I can consistently resolve the client side problem for good by rebooting the client and then re-mapping all of the mapped drives. The problem appears to be related to the client's "memory" of the pre-upgrade Samba server, which the reboot and re-map clears. I have the same issue and same fix on Windows XP SP3 and Windows Server 2003 SP2. This question is specifically: is it possible to reproduce the benefits of the Windows reboot without actually rebooting the client? I have tried restarting various Windows services, disabling and enabling the network, logging out and back in again, but nothing except a reboot appears to do the trick.

  Read the article

• ESXi onboard SATA passthrough [on hold]

  - by lodge93

  I am running ESXi 5.5 on a home system. When I attempt to pass one of the onboard SATA controllers (Intel ICH10R) to a VM, it is successful. However, the controller never appears in the VM. What else am I missing that would cause a VM to not recognize the controller? Additional Info: The controller is set to AHCI mode in the BIOS Prior to setting up the controller for passthrough, ESXi did recognize the controller and the drives I have tried with multiple VMs, none of which recognized the controller or the attached drives I have two onboard SATA controllers, on controller for ESXi and one for passthrough The final ideal state is that I could passthrough the controller to a FreeNAS VM

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• Occasional HDD Related Hangs

  - by diolemo

  I have an issue that seems to be disk related. Occasionally my system will block for 30 or so seconds and is mostly unresponsive. Those things already in memory requiring no disk access continue to function but those things requiring disk access (even small) hang. 30 seconds later everything is back to normal. I have 2 Samsung drives in RAID 0. I have 1 WD drive (has pagefile) I have an SSD used for caching (Intel Smart Response). This is a new install of Windows and the drives were fine in my old PC (~1 month ago). Has anyone experienced anything similar? Any suggestions to solve this one? Thanks in advance.

  Read the article

• How to clone & restore virtual box hard drive

  - by user23950

  What I want to do is to clone my virtual box hdd with dual boot os. Xp and Vista. I'm using acronis and back it up on a flash drive. And end up with the flash drive that is partitioned. 2 partitions just like the virtual box hard disk. What do I do to restore it. I'm running acronis inside virtual box. What do I do to make use of the backup and actually restore what I've back up. And to be able to boot to xp and vista again inside virtual box. Please help.

  Read the article

• Use server git installation in GitHub for Windows

  - by Lg102

  We are using Git as the version control for our website development. I work from a laptop, which is connected to the internal network via a WiFi connection. I've mapped the server drives as network drives in Windows. Commands such as git status take significantly longer for me than they do for my co-workers on wired connections. When connecting to the server using SSH and running commands on the git installation there, performance is even better. Is there a way to configure GitHub for Windows to use the server-installed git (with my credentials)? Note: While our production servers has a user configuration with proper permissions, the development server has only one root user.

  Read the article

• Which motherboard for Intel i7 and how to get RAID working?

  - by jasondavis

  I am wanting to build a new PC, I have a couple questions. 1) I am wanting to go with the Intel Core i7 920 Processor, can anyone reccomend a good reliable motherboard for this processor? Graphics card support does not matter (sli-crossfire). I would like to support a lot of ram, so the more ram slots the better. I have read so many bad reviews about certain boards not working good, I would love recommendation from experience. 2) I am wanting to run a couple SSD drives in RAID-0, I have never done this, will I need to purchase anything additional to the MB and CPU and drives to get raid working?

  Read the article

• Installed Ubuntu 11.10, getting hard disk health warnings

  - by Brad

  I'm getting hard disk health problem warnings... When I click the "examine" button the disk utility pops up. None of my drives are reporting any major issues, and the very first drive doesn't even have a SMART button. I don't really care if one of the drives is crashing, I've got everything backed up, but I just want to know how to stop these god forsaken message boxes from popping up randomly. I have already gone into the Disk Utility and checked "do not notify me if this drive is failing" on all of them except the one that doesn't have the SMART button. I've googled about as much as I can for one day.

  Read the article

• Three disk (possibly RAID) data recovery

  - by Martin

  I have on my desk three 160 GB disks that were once part of an HP Proliant Windows 2003 Server. They may have been part of a RAID configuration of some sort. They may or may not be damaged in some way. When I interface them via USB, one of them shows up as a drive, but unformatted. The others show up as uninitialized disks in manager. An alternative explanation is that the two drives were simply not unused. What's my first step? I've recovered data off damaged drives before but never had anything to do with RAID configs. How can I even tell if any type of RAID was used?

  Read the article

• Recovering data from a Silicon Image SiI3114 RAID

  - by Isaac Truett

  I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

  Read the article

• PCI IDE Controller

  - by mercutio

  I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

  Read the article

• Citrix has issues resolving network shares

  - by George

  We are having this weird issue with our Citrix (version 4.5) server (sitting on Windows 2003 r2), where a couple users have issues resolving single shared network drive. We use a logon script to map all shared drives. The weird part is that of 3 shared drives, users can access 2, but the 3rd one goes to the old server (even though the logon script points to the new server). And that issues is limited to a few users. I had them log off and re-loggin to no success. It happens just in Citrix. The file server, that is being accessed, is Windows 2008 R2. Like I said we use a logon script to map the network drive. I understand I might be a little confusing, I will gladly reword the post.

  Read the article

• What makes an Apple hard drive special?

  - by Michael Shnitzer

  The Mac Pro has a specific hard drive for sale in the Apple Store for $549.00. The drive has the following specs: Serial ATA 3GB per second 7200 RPM Amazon has a hard drive with the same specs for $169.99. The only difference I can tell is that the Apple hard drive label says it has "Apple HDD Firmware". What exactly is the benefit of this firmware and is there something I am missing that make up for the price difference in these two drives? Update: My initial comparison between the two drive was unfair. Apparently 2TB drives that are 3 GB/S and 7200 RPM are quiet a bit more than $169.99. Dell has a 2 TB SATA Caviar Black from Western Digital that is $319.99, which is closer to Apple's price.

  Read the article

• What's a worthwhile test for a new HD?

  - by Michael Kohne

  I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

  Read the article

• Can I swap a HDD from a RAID 1 for a bigger capacity drive?

  - by Gnuffo1

  I have a RAID 1 setup with two 500GB drives. So they mirror each other. I know that if I take one of them out and put in a new 500GB drive it will set it up so that the new drive will mirror the old one. My question is if I take out one of the 500GB drives and add say a 2TB drive, will it set up the 2TB drive to mirror the 500GB? I assume if it does, it will only allow me access to 500GB. However, if I then take out the one remaining 500GB after the data has been mirrored and stick in a 2TB, once that is rebuilt, will I then have a 2TB RAID setup with the same data as what was originally on the 2x 500GB setup?

  Read the article

• Economical way to get many harddrives into rack mount?

  - by Industrial

  Hi everyone, Please bear with me as being a bit of a newcomer at 19" rack-mounted equipment. I've thought a fair bit lately about the best way of getting 4x or 6x of 2.5" hard drives into my rack and are right now currently slightly confused about would be the best (economical) solution. After scouting the market, I've found this type of disk array units that offers built in RAID and a lot of drive slots and a truckload of geek cred, but at a price that just isn't going to fit in my budget. I've also found these type of cute adapters that takes two 2.5" drives in one 3.5" slot, but I will obviously need a chassie with a lot of 3.5" spaces in order to make it work. So what is the most economical way to house my harddrives in my rack?

  Read the article

• How can I rename files and subdirectories in a copied directory based on changes in the original?

  - by GaryF

  I have a directory structure with many hundreds of files and folders underneath it for organising files (in this case photos). I create backups of that directory structure by rsyncing it to identical copies on an external drives periodically. These drives may be offsite some of the time. I want to restructure and rename the files and directories in the original and then, later, when I have an external drive onsite, be able to run some tool that will cause these structural and naming changes to happen on the backup. If I just us rsync, it'll have to recopy much of the data to the backup drive, which I'd rather avoid due to the sizes involved. How can I get the changes I make to the original directory into the backups, as they become available, without having to recopy/rsync the data?

  Read the article

• Monitor disk I/O for specific drive in OS X

  - by raffi

  In my Macbook Pro, I have two internal drives and I've connected a third drive via USB in enclosure. I am currently doing a secure wipe of the external drive and I was interested in seeing what the disk I/O was for that particular drive, but when I use Activity Monitor I only see the total disk usage for all drives combined. Is there any way to monitor a specific drive's total I/O, preferably via a built-in or free method? I don't want to filter by process ID. I just want to filter by mounted disk.

  Read the article

• TrueCrypt Corrupted Files

  - by B. Knight

  Several months ago, I needed to reorganize my data across multiple external hard drives with my laptops primary hard drive as the go-between. My external hard drives are all encrypted with TrueCrypt. It appears to me that somehow during the transfer of my files between the encrypted external drive an the unencrypted internal drive, the files were transferred "as-is" (in their encrypted state). The files range from very small to very large. It appears that this may have happened during one consecutive transfer session. Has anyone ever experienced this problem, and if so were you able to fix it? Is there a way to recreate the encrypted partition, transfer the files, and then decrypt them to their usable state? Or can the files somehow be decrypted through other means? UPDATE: I am running Windows 7 (x64) HP now, but may have been runninG ENT. then. Toshiba Laptop 650GB HDD / 4GB Mem. Latest version of TC

  Read the article

• Debian SMB share having permission issues in windows 7

  - by xxpor

  Hi Everyone, I setup a Debian squeeze server with samba. I then shared my /media directory with the following configuration: [media] comment=Hard Drives read only = no locking = no path = /media guest ok = yes browsable = yes directory mask = 0777 When the drives are mapped in Windows 7, the user can write to all of the subdirectories of media (sdb1, sdc1, etc), but cannot write to any folders that they create themselves in the subdirectories of media. For example, if the user mapped /media/sdb1 to Z:, and then creates a folder Z:\test, the folder is created successfully, but no files can be written to Z:\test. If the user ssh's into the server, they have no problems writing to these directories. I have included the screenshots, in order, of what happens on Windows. This samba share is mounted with ntfs-3g, if it makes a difference. Screenshots are here

  Read the article

• HP MSA 1000 SAN: Can I use 1 array/shelf?

  - by CC

  Hi all, I'm planning some expansion on an HP MSA1000 SAN. My boss says that we need to have two separate arrays on the new enclosure, one for Bays 1-7, the other for Bays 8-14. Is there any reason that we need to do this? My plan was to have the entire expansion shelf be 1 array, then create RAID 6 logical drives from that. I don't understand what splitting drives into separate arrays gain us. We don't have dual controllers, so there's no benefit there. Thanks, CC

  Read the article

• USB 3.0 Not Working

  - by senzen

  I bought an Asus A43E laptop which comes with one USB 3.0 port. In Windows 7 it was working just fine, but after Windows 8 has been installed the USB doesnt work anymore. When I insert any flash drive windows has no reaction. I have been trying to find a driver but I couldnt find one that fits. I know this port works cause I am able to boot windows throw a flash drive. It might be some driver missing. You guys have any idea how can I solve this?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >