Search Results

Search found 7513 results on 301 pages for 'actual'.

Page 199/301 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• Possible disk IO issue

  - by Tim Meers

  I've been trying to really figure out what my IOPS are on my DB server array and see if it's just too much. The array is four 72.6gb 15k rpm drives in RAID 5. To calculate IOPS for RAID 5 the following formula is used: (reads + (4 * Writes)) / Number of disks = total IOPS. The formula is from MSDN. I also want to calculate the Avg Queue Length but I'm not sure where they are getting the formula from, but i think it reads on that page as avg que length/number of disks = actual queue. To populate that formula I used the perfmon to gather the needed information. I came up with this, under normal production load: (873.982 + (4 * 28.999)) / 4 = 247.495. Also the disk queue lengh of 14.454/4 = 3.614. So to the question, am I wrong in thinking this array has a very high disk IO? Edit I got the chance to review it again this morning under normal/high load. This time with even bigger numbers and IOPS in excess of 600 for about 5 minutes then it died down again. But I also took a look at the Avg sec/Transfer, %Disk Time, and %Idle Time. These number were taken when the reads/writes per sec were only 332.997/17.999 respectively. %Disk Time: 219.436 %Idle Time: 0.300 Avg Disk Queue Length: 2.194 Avg Disk sec/Transfer: 0.006 Pages/sec: 2927.802 % Processor Time: 21.877 Edit (again) Looks like I have that issue solved. Thanks for the help. Also for a pretty slick parser I found this: http://pal.codeplex.com/ It works pretty well for breaking down the data into something usable.

  Read the article

• My server keeps sending emails to [email protected]

  - by xtrimsky

  When I type mailq on my server, I get: BB523653A62 4025 Wed Jun 4 10:40:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout002.prod.phx3.secureserver.net : DED : AJeb1o0334uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] B33AD653A4A 4025 Wed Jun 4 08:20:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout002.prod.phx3.secureserver.net : DED : AJeb1o0334uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] B77DF653A63 4025 Wed Jun 4 10:50:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout001.prod.phx3.secureserver.net : DED : AJvF1o00L4uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] B943C653A3C 4025 Wed Jun 4 06:40:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout001.prod.phx3.secureserver.net : DED : AKBv1o00P4uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] (there is probably about 50 of these, and I've cleared the queue today), do you know where these could be coming from ? is it my server sending some logs to "hostmaster" ? I've replaced my actual domain, with "MYDOMAIN". How can I find what could be sending these emails ? The server has recently been hacked so I'm also a bit worried. Thanks!

  Read the article

• Take a regular Windows 7 clone with clonezilla (device-to-image)

  - by Mario De Schaepmeester

  I am unexperienced with cloning software and I've decided to use Clonezilla as it seemed best as freeware. I chose device image and left most options standard. I chose expert mode anyway to see what I could configure, and decided to try the lzop algorithm instead of the default one for compression. The rest was left at default. When Clonezilla asked me which partitions to clone (I chose parts to image), I chose the C:\ drive but Windows 7 also creates a 100MB partition on setup for system files (the actual boot partition?). I copied that into the image as well. The reason I didn't choose disk to image is that I also have a data partition that needs to stay intact. Now I'm simply not sure that this is the way to go, should I ever need to restore my disk image. Will Clonezilla know what to do with both partitions and will Windows 7 work perfectly after restoring? Edit: apparantly a similar question has been asked before. The link to the first article in the answer is not relevant to me since it covers a device-to-device clone. It appears the windows installation disk can repair the 100MB partition. As for Clonezilla, it copies "hidden data after the MBR" by default too. I don't know, I feel I'll be allright whether by restoring the partition with Clonezilla or repairing it with the Windows 7 disk.

  Read the article

• Issue with SSH on Ubuntu - Local connection ok, remote connection - Is it me or my ISP?

  - by Benjamin

  I have an issue with a server running Ubuntu 12.04, I am trying to set up a remote connection so I can access the server at my work from out of town. I have installed the SSH server and all that stuff, and I have reassigned the default port from 22 to 3399. A local connection from any OS can connect on the 192.168... address, but in no way can I get a connection on the actual IP address. I believe my configuration is correct, and I will attach it. If I have done something wrong in the config, please tell me and I will make a change to it. I honestly think that the Router that my ISP provided is horrible, and although the port for ssh is forwarded, it might be stopping any traffic coming inbound. Is there anything I can try to verify this? /var/log/auth does not show any error when I connect VIA our static IP. I have included all values not commented out below: (sshd_config) Port 3399 ListenAddress 0.0.0.0 Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key UsePrivilegeSeparation yes KeyRegenerationInterval 3600 ServerKeyBits 768 SyslogFacility AUTH LogLevel INFO LoginGraceTime 120 PermitRootLogin yes StrictModes yes UseDNS no RSAAuthentication yes IgnoreRhosts yes RhostsRSAAuthentication no HostbasedAuthentication no PermitEmptyPasswords no ChallengeResponseAuthentication no PasswordAuthentication yes GSSAPIAuthentication no X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Am I doing this wrong? port forwarding image

  Read the article

• Moving Images from Database to File System

  - by msarchet

  So currently in our system we have been storing image files in the database (SQL Express 2005). Unfortunately it wasn't perceived that this would reach the max database size allowed by the SQL Express License. So I have proposed a plan of storing the images in the file system and only indexing where the file is in the database. The plan is to save the root path in our OptionsTable as something like ImagesRoot and then only saving the actual imageID in the table, which is basically a FK from the PK of the record with the image. I have determined that it would be best to then split this down into sub-directories inside of the ImagesRoot based on every 1000 images so basically (ImagedID / 1000)\(ImageID % 1000) (e.g. ImageID is 1999 it would be in %ImageRoot%\1\999). I'm looking for any potential pitfalls of this system and any thing that could be improved as I am already receiving some resistance from the owner of the company who wants everything to be in databases. Along those lines I would also take reasons why it should all be in databases. I should mention we have in place already automated backups that run for all of our customers databases and any files that are generated by our program that are required to be saved over a period of time These are optional but if someone isn't using our system it is expected that they are using their own or data loss isn't our problem (it is if our system fails and they are using it!). Thanks

  Read the article

• How should I configure my Apache Hosts File to serve a different site for localhost than for my domain/publicip?

  - by rofls

  I'm trying to test out a LAMP (with PHP5 specifically) setup with Django already serving a website. I want to do the PHP stuff on localhost for now, so that when I do something like this: curl http://localhost/database/script.php?var=1, I get a response from the php server. Right now I'm getting a Django error. I tried something like this in the default file in sites-available: Listen 80 <VirtualHost aaa.bbb.ccc.ddd> ServerName localhost DocumentRoot /home/phpsite </VirtualHost> where aaa.bbb.ccc.ddd is the local ip address, and changing my actual site's settings to specify the public ip, like this: Listen 80 <VirtualHost www.xxx.yyy.zzz> ServerName mysite.com DocumentRoot /srv/www/mysite WSGIScriptAlias / /srv/www/mysite.wsgi </VirtualHost> but then I start getting all kinds of errors when I start apache, such as port ::[80] is already in use or something. I noticed that the hosts file that's located in /etc/apache2/ is apparently pointing everything to mysite.com, including my local ip as well as 127.0.0.1 and 127.0.1.1; Do I need to change the configuration there too?

  Read the article

• Google Chrome no longer treats " Web Apps" specially

  - by Adrian Petrescu

  I'm running Google Chrome (Dev Channel), with the --enable-apps flag, in both OSX and Ubuntu. I have four or five WebApps installed, and they appear in the "New Tab" page just fine. The problem is that, before, when the feature first became available in the Dev Channel, the actual tabs hosting the webapps received special treatment; they would have 3D Dock-like look, and (more importantly) the tab bar would be hidden while using that tab. Sometime in the last few weeks, however, it seems that the special treatment just disappeared with one of the daily updates. The webapps still show up in the New Tab page, they still work in the sense that they capture all URLs going to that webapp, and they use the right icons; but they've basically become indistinguishable from just a regularly pinned tab. The two special features mentioned above have disappeared, on both Ubuntu and OS X. My questions are simply: a) Does this happen to anyone else? When exactly did it begin? b) Why did Google regress the feature? c) Is there any flag I can enable to get it back?

  Read the article

• What is the risk of introducing non standard image machines to a corporate environment

  - by Troy Hunt

  I’m after some feedback from those in the managed desktop or network security space on the risks of introducing machines that are not built on a standard desktop image into a large corporate environment. This particular context relates to the standard corporate image (32 bit Win XP) in a large multi-national not being suitable for a particular segment of users. In short, I’m looking at what hurdles we might come across by proposing the introduction of machines which are built and maintained by a handful of software developers and not based on the corporate desktop image (proposing 64 bit Win 7). I suspect the barriers are primarily around virus definition updates, the rollout of service packs and patches and the compatibility of existing applications with the newer OS. In terms of viruses and software updates, if machines were using common virus protection software with automated updates and using Windows Update for service packs and patches, is there still a viable risk to the corporate environment? For that matter, are large corporate environments normally vulnerable to the introduction of a machine not based on a standard image? I’m trying to get my head around how real the risk of infection and other adverse events are from machines being plugged into the network. There are multiple scenarios outside of just the example above where this might happen (i.e. a vendor plugging in a machine for internet access during a presentation). Would a large corporate network normally be sufficiently hardened against such innocuous activity? I appreciate the theory as to why policies such as standard desktop images exist, I’m just interested in the actual, practical risk and how much a network should be protected by means other than what is managed on individual PCs.

  Read the article

• What causes PHP pages to consistently download instead of running normally

  - by Jonathan

  Hi, I'm running a Ubuntu Server on a VM, to test out different web forum solutions. I have set up a ~/public_html/ to be accessible with the apache2 web server, and that works fine. However when I go to a .php file on a browser (using my VM's ip-address/~username/phpfile.php) it does not display it as it should. Instead it offers to save to file/asks what program to open it with. Interestingly though that dialog box does recognise that it is a php file. I have the following version of php installed on the system: PHP 5.3.2-1ubuntu4.5 with Suhosin-Patch (cli) (built: Sep 17 2010 13:49:46) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies And the following server: Server version: Apache/2.2.14 (Ubuntu) Server built: Nov 18 2010 21:19:09 If anyone knows what might be causing this/potential solutions it would make me very happy :) EDIT: Turns out files this behaviour was only apparent on files in the ~/public_html/ directory. All php files in /var/www/ work fine. Prizes go to whoever can explain why? :D (And by prizes I just mean a well done, no actual prizes I'm afraid.)

  Read the article

• trouble executing php scripts with nginx

  - by lovesh

  My nginx config looks like this server { listen 80; server_name localhost; location / { root /var/www; index index.php index.html; autoindex on; } location /folder1 { root /var/www/folder1; index index.php index.html index.htm; try_files $uri $uri/ index.php?$query_string; } location /folder2 { root /var/www/folder2; index index.php index.html index.htm; try_files $uri $uri/ index.php?$query_string; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } The problem with the above setup is that i am not able to execute php files. Now as per my understanding of nginx config rules, when i am in my webroot(/) which is /var/www the value of $document_root becomes /var/www so when i request for localhost/hi.php the fastcgi_param SCRIPT_FILENAME becomes /var/www/hi.php and that is the actual path of the php script. Similarly when i request for localhost/folder1/hi.php the $document_root becomes /var/www/folder1 because this is specified as the root in folder1's location block so again the fastcgi_param SCRIPT_FILENAME becomes /var/www/folder1/hi.php. But because the above configuration does not work so there is something wrong with my understanding. Please help?

  Read the article

• Reverse SSH tunnel: how can I send my port number to the server?

  - by Tom

  I have two machines, Client and Server. Client (who is behind a corporate firewall) opens a reverse SSH tunnel to Server, which has a publicly-accessible IP address, using this command: ssh -nNT -R0:localhost:2222 [email protected] In OpenSSH 5.3+, the 0 occurring just after the -R means "pick an available port" rather than explicitly calling for one. The reason I'm doing this is because I don't want to pick a port that's already in use. In truth, there are actually many Clients out there that need to set up similar tunnels. The problem at this point is that the server does not know which Client is which. If we want to connect back to one of these Clients (via localhost) then how do we know which port refers to which client? I'm aware that ssh reports the port number to the command line when used in the above manner. However, I'd also like to use autossh to keep the sessions alive. autossh runs its child process via fork/exec, presumably, so that the output of the actual ssh command is lost in the ether. Furthermore, I can't think of any other way to get the remote port from Client. Thus, I'm wondering if there is a way to determine this port on Server. One idea I have is to somehow use /etc/sshrc, which is supposedly a script that runs for every connection. However, I don't know how one would get the pertinent information here (perhaps the PID of the particular sshd process handling that connection?) I'd love some pointers. Thanks!

  Read the article

• Workaround for Dell "Power Supply Not Recognised" issue

  - by Haedrian

  So, I have a Dell Inspirion and the power supply port appears to be damaged. Basically when I plug it in I get a nice popup telling me that it couldn't detect that its a Dell power supply so it won't charge the battery and underclocks the system. It still works for other purposes (that is, giving power) I thought it was the actual power supply cable so I bought a new one, that worked for a while, provided I inserted it at JUST THE RIGHT angle. But now that's not working anymore, so I assume its the part which connects to the computer. The battery charging I can live without, the underclocking I can't. I'd like a way around this issue. Things I've tried: Updating the BIOS Replacing the power supply cable Inserting it at different angles Turning it off and on again Swearing at it Twisting it while inserting it So, is there a workaround somehow? I'd like to avoid taking out my soldering kit and risking permanently damaging expensive equipment if that's allright. I'm hoping for a software solution. Added: The exact model is a Del Inspirion N5010

  Read the article

• Group Policy - Published software not upgrading

  - by VokinLoksar

  I'm testing this with mercurial MSIs, but it's the same for other packages. I've created a new group policy and added an old version of mercurial to User software installation as a Published package. On a Windows 7 client I install the package through Programs and Features. The installation works fine. Now, I would like to publish an updated version of mercurial. I create a new Published package. Under 'Upgrades' I configure it to replace (upgrade also doesn't work) the old version and mark this upgrade as 'Required'. The old package is not removed. The Windows 7 client is then restarted. When I log back in, I see a status message saying something like 'Removing managed software Mercurial ...'. There is no message about installation of the upgrade. If I look in Programs and Features, I can see the new version of mercurial listed. However, the actual mercurial directory under Program Files is missing. It's as though the installation recorded information about the MSI, but didn't actually install anything after removing the old version. As I mentioned, this isn't specific to mercurial. I've tried using other apps and have yet to find one that can be upgraded via a Published package. Using Assigned packages in Computer Configuration works without problems, but I would like this software to be optional rather than required. Ideas?

  Read the article

• Windows 7 boot manager not localized on UEFI systems

  - by Massimo

  I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

  Read the article

• Why database partitioning didn't work? Extract from thedailywtf.com

  - by questzen

  Original link. http://thedailywtf.com/Articles/The-Certified-DBA.aspx. Article summary: The DBA suggests an approach involving rigorous partitioning, 10 partitions per disk (3 actual disks and 3 raid). The stats show that the performance is non-optimal. Then the DBA suggests an alternative of 1 partition per disk (with more added disks). This also fails. The sys-admin then sets up a single disk, single partition and saves the day. The size of disks was not mentioned but given today,s typical disk sizes (of the order of 100 GB), the partitions ; would be huge, it surprises me that a single disk with all partitions outperformed. Initially I suspect that the data was segregated and hence faster reads. But how come the performance didn't degrade as time went by with all the inserts and updates happening? Saw this on reddit, but the explanation was by far spindle/platter centered. There was no mention in the article about this. Is there any other reason? I can only guess that the tables were using a incorrect hash distribution causing non-uniform allocation across disks (wrong partitioning); this would increase fetch times. Any thoughts?

  Read the article

• 'Future-proof' Live Audio Capture & Broadcast [migrated]

  - by maxpowers

  I'm looking to implement some live audio broadcasting functionality within a Ruby on Rails site for a client and was hoping I could get some input from people who have tackled this type of thing before. Essentially what I need to do is capture and record a user's audio (via microhpone, line in, etc), then stream that to 1,000+ listeners with very little latency, like sub 2 second if possible. So it looks like we've got 3 parts: Web-based audio capture (likely with Flash or JS) Server to accept audio feed and stream to listeners (likely Icecast or Wowza) Actual audio player (maybe HTML5 w/ Flash as a fallback? Maybe this jPlayer fork) Does RTMP makes sense here? Or maybe HTTP? What's the most 'future-proof' way to make this happen? Building with mobile in mind, but still want to be able stream to anyone. I've found lots of potentially helpful threads and software but I'm struggling to get an idea of how it all fits together. I'm a front end guy and way out of my comfort zone so if anyone has insights to offer, I'd love to hear them.

  Read the article

• Cloning a git repository from a machine running OS X

  - by Mike

  Hi folks, I'm trying to host a git repository from my home OS X machine, and I'm stuck on the last step of cloning the repository from a remote system. Here's what I've done so far: On the OS X (10.6.6) machine (heretofore dubbed the "server") I created a new admin user Logged into the new user's account Installed git Created an empty git repository via "git init" Turned on remote login Set port mapping on my router (airport extreme) to send ssh traffic to the server Added a ".ssh" directory to the user's home directory From the remote machine (also an OS X 10.6.6 machine), I sent that machine's public key to the server using scp and the login credentials of the user created in step 1 To test that the server would use the remote machine's public key, I ssh'd to the server using the username of the user created in step 1 and indeed was able to connect successfully without being asked for a password I installed git on the remote machine From the remote machine I attempted to "git clone ssh://[email protected]:myrepo" (where "user", "my.server.address", and "myrepo" are all replaced by the actual username, server address and repo folder name, respectively) However, every time I try the command in step 11, I get asked to confirm the server's RSA fingerprint, then I'm asked for a password, but the password for the user I set up for that machine never works. Any advice on how to make this work would be greatly appreciated!

  Read the article

• How much free memory should I have on my webserver?

  - by neanderslob

  I have a webserver that's currently hosting two Wordpress sites and some java-based collaboration software. The server has 2G of memory and is currently using about 1.8G of the available memory. Right now what's on here is pretty much a pilot project that's getting negligible traffic so I think it's pretty clear that I'll be needing more memory. I was wondering, if I was to release it, how I might anticipate my memory needs based on the traffic it gets. I've poked around on Google and what I've found has been a bit tenuous. Is there a good heuristic that one should use when calculating memory demands as a function of the base (no traffic) load on the server? For reference, the output of free -m can be seen below: total used free shared buffers cached Mem: 2048 1832 215 0 0 0 -/+ buffers/cache: 1832 215 Swap: 0 0 0 To me this looks like actual memory used and isn't an illusion due to caching or anything else. I figure the demands of my collaboration software will have to be experimentally tested so here's free -m without that software running: total used free shared buffers cached Mem: 2048 1109 938 0 0 0 -/+ buffers/cache: 1109 938 Swap: 0 0 0 My plan B to figure this out is to add a bunch of swap space to the server, give it some traffic and adjust according the the amount that swap gets used. I was just wondering if anyone had a good rule of thumb to estimate how much memory I should plan on in advance...or if what I'm thinking is nuts. Many thanks in advance (I'm really quite new to this).

  Read the article

• Puppet: is it ok to "force" certname when you expect to shuffle nodes around?

  - by Luke404

  We all know (good example on SF) that Puppet hostname detection could be... fun. At our company (and I guess we're not alone at this) we usually pre-configure servers at our offices and test them before bringing the gear to a remote datacenter and rack them. Of course the reverse dns will change when doing that, even if we don't change the actual hostname of the system. We're slowly drafting our puppet setup and I'd like to be sure those moves won't create problems. My idea is to explicitly configure the desired full FQDN of the system as certname in puppet.conf at server provision time (before the very first puppet run). My process would look something like this: basic o.s. installation basic network configuration, enough to reach the internet and resolve dns install puppet and set up certname start puppet and let him manage the whole configuration test, fix problems in config (via puppet), re-test, and so on... manually stop puppet set up new network configuration for the datacenter network move the machine to DC turn it on puppet should automatically start and keep on doing its job The process is supported by detecting the environment in puppet's manifests (eg. based on subnet, like they do at Wikimedia) and modify configuration as needed (eg. resolv.conf contents appropriate for each network). Each node's certname will never change for the whole system life cycle. Is there any problem with this approach? Could it be improved?

  Read the article

• Empty $upstream_http_location variable if response was cached

  - by Ivaldi

  I would like to cache the response of an redirect. (Cache the request to some site which returns a redirect and cache the second request which returns the actual content.) So far my config looks like this: location = /proxy { error_page 301 302 307 = @redir; resolver 8.8.8.8; proxy_pass $arg_url; proxy_intercept_errors on; proxy_cache pcache; proxy_cache_key $arg_url; proxy_cache_valid 200 301 302 307 1d; proxy_cache_min_uses 1; proxy_ignore_client_abort on; proxy_ignore_headers Set-Cookie Expires Cache-Control; } location @redir { resolver 8.8.8.8; # we need to assign $upstream_http_location to another var in order to use it with proxy_pass set $target $upstream_http_location; proxy_pass $target; proxy_cache predirects; proxy_cache_key $upstream_http_location; proxy_cache_valid 200 301 302 307 1d; proxy_cache_min_uses 1; proxy_ignore_headers Set-Cookie Expires Cache-Control; } It works for the first request or without the 30x codes for proxy_cache_valid in the /proxy part, but $target and $upstream_http_location are empty, if the response was cached. Is there a nice solution to cache both requests? Thanks!

  Read the article

• Use cell formatting (e.g. "Good", "Bad", "Neutral") in formulas?

  - by ngm

  I am compiling a comparison of different pieces of software in an Excel spreadsheet. It is a big long list of features (the rows), with each column being one of the applications I'm evaluating. I've used styles to visually show how well each product meets each feature, as well as the importance of that feature, and now I'm wondering if there's a way I can use those annotations in a formula. The table is like: . | Product A | Product B | Product C Feature A | blah blah blah Feature B | blah blah blah Feature C | blah blah blah .... | .... | etc | Where I've put 'blah' in the table above, in my actual spreadsheet is (potentially lengthy) descriptive text explaining something about this feature in the given product. I've then used the styles "Good", "Neutral" and "Bad" to visually annotate the description, to show how well each product meets that feature. For each feature I've also used the styles Accent4, 60% Accent4, 40% Accent4, etc, to annotate the importance of each feature. Now I'm wondering if somehow I can use those styles (the annotations) to tot up a total score for each product. e.g., Score for feature A = valueof(60% Accent4) * valueof(Good) Is it possible at all?

  Read the article

• Notify user of message arrival in another mailbox

  - by Tim Alexander

  This is very similar to this question but has a few differences. Basically we have a user dealing with a conflict of interest case. To separate the mail from prying eyes (and the draconian routing system we have in place) the user has been granted access to a second conflicts mailbox that is only accessible to him via OWA. This has worked fine for years but now the user would like a notification to be sent to him when a message arrives in his conflicts mailbox. Initially I thought an Outlook rule would work but of course the client is never logged in so the Outlook rules are never processed. This led me to think that an Exchange Transport rule might work but the only options I can see are to Forward or Copy the message to another user. this would bypass the conflicts setup. All I really need is a notification and not the actual message to be sent. Is this at all possible with Exchange 2007? Or if not is there any thirdparty addition or workaround that anyone has come across?

  Read the article

• Live Messenger SimilarityTable2 file

  - by adrianbanks

  I am trying to free up some space on my laptop's hard disk and am using a tool (SpaceMonger) that will show me a treemap of the whole disk. The problem I have comes from Live Messenger's SimilarityTable2 file. I have no idea what it is for, but I know that it is a sparse file, meaning that it shows as taking up 8GB of disk space, but actually only takes up 132KB of space on disk. The problem is that because SpaceMonger thinks this file is 8GB, it swamps the other files and takes up most of the treemap, making it hard to see the other files that really are large. Is this file safe to delete? If not, how do I make its actual size on disk match its reserved size? If that's not possible, how can I make SpaceMonger (or another treemap tool) use the real size of the file and not the reserved size? EDIT: I've just realised that I have some NTFS junctions set up, meaning that the same set of directories appear twice. Is there any way to stop this happening as well?

  Read the article

• Many clients on a wireless AP for UDP broadcast packets

  - by distorteddisco

  I asked this question on StackOverflow and was directed over here, so I'd appreciate any advice. I'm deploying a smartphone application as part of a live music performance that depends on receiving UDP broadcast packets from a wireless access point. I'm guessing that between 20 and 50 clients will be connected at any one time. I'm aware that a maximum of 20 clients per access point is advised, but as the UDP broadcast packets are ground through the LAN, how would I be able to link multiple APs together? I'm looking for recommendations on a suitable AP for this. The actual data transmission rates are very low - only a few kB/s - as I'm just sending small messages to the smartphone apps, and there will be no WAN internet connection. I tried it with a few connected peers on an adhoc wireless connection without any problems, but ran into dropped packet issues on an old WRT54G running ddwrt, though it's in pretty rough shape. What's the best way to do this? I suppose I could limit concurrent wireless connections to 20 clients... but more would be nice. EDIT: I should also say that it's purely one-way communication; the smartphone application is only receiving broadcast packets, not sending anything.

  Read the article

• How do I view source in Outlook 2010?

  - by Martin Duys

  This question has already been asked here; but the answer only gives advice on how to view the email header not the actual html source of the email. There is another question here, which I think may be caused by the same issue as mine, but does not have a satisfactory answer (the answer does not work for the person who posted the question) If I right click on the bottom of an email I can see the option to 'view source' but when I select it nothing happens. I have done a bit of research and came across a post for a much earlier version of Outlook that suggested adding something into the registry. I applied this advice, but it made no difference; but I'm pretty sure that applying this solution correctly for my circumstances will do the trick. When I first received this machine it had a demo version of UltraEdit installed. I uninstalled UltraEdit and installed Notepad++ instead. I am convinced that there is a registry entry that is pointing to UltraEdit as the default view for 'view source' in my email and I need to replace this entry with a reference to Notepad or Notepad++, but I don't know how to do this. Any suggestions?

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >