Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 206/337 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

  • RAID1 Hard drives with Intel Controller

    - by Dave_H
    I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

    Read the article

  • RAMDiskVE keeps causing computer to freeze

    - by Steph
    I found this in the Event Viewer logs: The description for Event ID 11 from source RAMDiskVE cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. Which doesn't say much. The details don't reveal much more: Failed to read configuration information from registry. 0000000002002C00000000000B0007C0000000000000000000000000000000000000000000000000 So my question is, what is RAMDiskVE and what device is it for? Basically I'm trying to rule out hardware but I have no idea what's failing...

    Read the article

  • iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

    - by Goober
    The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

    Read the article

  • MaxClients in apache. How to know the size of my proccess?

    - by Larry
    From http://httpd.apache.org/docs/2.2/misc/perf-tuning.html The single biggest hardware issue affecting webserver performance is RAM. A webserver should never ever have to swap, as swapping increases the latency of each request beyond a point that users consider "fast enough". This causes users to hit stop and reload, further increasing the load. You can, and should, control the MaxClients setting so that your server does not spawn so many children it starts swapping. This procedure for doing this is simple: determine the size of your average Apache process, by looking at your process list via a tool such as top, and divide this into your total available memory, leaving some room for other processes. The main issue is that I can't understand how to know the size, because, well i have the size of httpd on no more of 3888 But, if we need to determine the number for MaxClients, and I have 4GB of RAM, so I get: 972, so I should use like 900 in the MaxClients?

    Read the article

  • Predictive vs Least Connection Load Balancing Techniques

    - by Mani
    I have a windows based desktop application that communicates via TCP to the application servers. (windows 2003). No sticky sessions between client calls. We have exactly 2 servers to load balance and we are thinking to use a F5 hardware NLB. The application is a heavy load types, doing not much bussiness logic in the services but retrieving quite a big amount of data at most of the times. May be on an average 5000 to 10000 records at all times. Used mainly for storing and retirieving data and no special processing of data or calculations running on the server side. I am favouring 'predictive' considering my services take a while at times to return data and hence tracking the feedback would yield some better routing as in predictive. I am not sure if the given data is sufficient enough to suggest some ideas but considering these, what would be some suggestions\things to consider\best between Predictive and Least Connections ? Thanks.

    Read the article

  • Win 7 move ssd from SATA 1 to SATA 0, drive letter from G: to C:

    - by GaryH
    I got a new SSD, plugged it in on my notebook to the available SATA 1 connector and installed Win7 (Ultimate) on it as drive G:. It is working great. Now I would like to move the SSD to the SATA 0 connector and change the drive letter to C:. The existing 500gb HD that has another copy of Win7 (home) on it I will format and connect to the SATA 1 connector as the G: or some other letter drive. Is this possible? Is there software that will go through the registry and "correct" all of the entries for "G:" for everything installed and fix it all up? Or am I better off biting the bullet and setting the hardware where I want it and doing a fresh install of everything? Thanx, G

    Read the article

  • Virtual system drive is split between separate LUNs

    - by Tigran
    My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

    Read the article

  • PEN daemon as load balancer, IIS web logs not showing true requester IPs

    - by Aszurom
    I have a Hercules vmware appliance, which is a micro-linux vm that runs the PEN daemon and acts as a server load-balancer. It takes any incoming request on the appliance's IP and routes it out to a number of alternate IPs. The logs of the daemon show the true IP of the browsers hitting the website. The logs of the websites themselves (iis 6 and 7) only show the requester IP as being that of the load balancer. The IT manager tells me that when we had a hardware appliance (serveriron XL) doing the load balancing, the web logs reflected the requester IPs accurately. Is there any way to get this resolved with the daemon, or will I be digging that out of the closet and plugging it back in?

    Read the article

  • What are some of the best wireless routers for a price-conscious home power-user?

    - by Alain
    I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

    Read the article

  • Duplicate incoming TCP traffic on Debian Squeeze

    - by Erwan Queffélec
    I have to test a homebrew server that accepts a lot of incoming TCP traffic on a single port. The protocol is homebrew as well. For testing purposes, I'd like to send this traffic both : - to the production server (say, listening on port 12345) - to the test server (say, listening on port 23456) My clients apps are "dumb" : they never read data back, and the server never replies anyway, my server only accepts connections, and do statistical computations and store/forward/service both raw and computed data. Actually, client apps and hardware are so simple there is no way I can tell clients to send their stream on both servers... And using "fake" clients is not good enough. What could be the simplest solution ? I can of course write an intermediary app that just copy incoming data and send it back to the testing server, pretending to be the client. I have a single server running Squeeze and have total control over it. Thanks in advance for your replies.

    Read the article

  • Errors reported by "powercfg -energy"

    - by Tim
    Running "powercfg -energy" under Windows 7 command line, I received a report with following three errors: System Availability Requests:Away Mode Request The program has made a request to enable Away Mode. Requesting Process \Device\HarddiskVolume2\Program Files\Windows Media Player\wmpnetwk.exe CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 49.25 Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. I was wondering for the first error, what does "enable away mode" mean? for the second, what utilization percentage of CPU is reasonable? for the third, what is "PCI Express Active-State Power Management (ASPM)"? How I can correct the three errors? Thanks and regards!

    Read the article

  • Looking for detailed Instructions on building a DIY NAS

    - by Kaushik Gopal
    I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

    - by TecBrat
    The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

    Read the article

  • Using DD for disk cloning

    - by roe
    There's been a number of questions regarding disk cloning tools (yes, I did search for it) :) and dd has been suggested at least once. I've already considered using dd myself, mainly because ease of use, and that it's readily available on pretty much all run of the mill bootable linux distributions. To my question, what is the best way to use dd for cloning a disk. I don't have much time to go around, and no test-hardware to play with, so I need to be prepared, and it's pretty much a one-shoot chance to get it done. I did a quick google search, and the first result was an apparent failed attempt. Is there anything I need to do after using dd, i.e. is there anything that CAN'T be read using dd? Thanks!

    Read the article

  • Need software to save videos from 4tube.com - to watch the videos smoothly

    - by Harold34
    Isn't there a programs that will capture screen writes at the hardware level? I have tried several Firefox add-ons, and several stand-alone programs, and none of them will save videos from this site. I even paid for Replay Media Catcher, and it didn't work, so I got a refund. (The website for the best Firefox video downloader I have, Downloadhelper, said Replay Media Catcher worked with that site.) I have a slow internet connection, and cannot watch videos smoothly unless I can cache them. This site (4tube.com) doesn't cache, when you restart, it reloads, when you pause it stops - so I need to be able to save the videos to be able to watch them.

    Read the article

  • my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

    - by Yosef
    Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

    Read the article

  • Windows 8.1 Insufficient storage available to create shadow copy

    - by Bob.at.SBS
    [Note: After I entered the problem statement, I found this question, which is apparently the same problem. Maybe one of us will get a good answer...] I have used the "Windows 7 File Recovery" tool under Windows 8 to create system image backups to an external USB hard drive. I built a new Windows 8.1 machine, and I want to create my first system image backup of that machine to the same USB hard drive. The "Windows 7 File Recovery" tool is gone in Windows 8.1, but wbAdmin is alive and well: wbAdmin start backup -backupTarget:\\?\Volume{2a2b...994f} -allCritical -quiet fails with this text displayed: wbadmin 1.0 - Backup command-line tool (C) Copyright 2013 Microsoft Corporation. All rights reserved. Retrieving volume information... This will back up (EFI System Partition),(C:),Recovery (300.00 MB) to \?\Volume {2a2b1255-3a86-11e3-be86-b8ca3a83994f}. The backup operation to F: is starting. Creating a shadow copy of the volumes specified for backup... Summary of the backup operation: The backup operation stopped before completing. The backup operation stopped before completing. Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x8004231f) Insufficient storage available to create either the shadow copy storage file or other shadow copy data. The EFI System Partition is 100 MB The Recovery Partition is 300 MB The C partition is 1.72 TB, NTFS, 218 GB used, 1.51 TB free The destination drive is 1.81 TB, NTFS, 678 GB used, 1.15 TB free I've fiddled with vssadmin resize shadowstorage, with no change in the error. vssadmin list shadowstorage displays: Shadow Copy Storage association For volume: (C:)\?\Volume{37a0...263}\ Shadow Copy Storage volume: (C:)\?\Volume{37a0...263}\ Used Shadow Copy Storage space: 2.39 GB (0%) Allocated Shadow Copy Storage space: 2.81 GB (0%) Maximum Shadow Copy Storage space: 531 GB (30%) Shadow Copy Storage association For volume: (F:)\?\Volume{2a2...94f}\ Shadow Copy Storage volume: (F:)\?\Volume{2a2...94f}\ Used Shadow Copy Storage space: 334 GB (17%) Allocated Shadow Copy Storage space: 337 GB (18%) Maximum Shadow Copy Storage space: UNBOUNDED (922154758%) (Yeah, the "percent calculation" for UNBOUNDED is seriously bogus.) I've run SFC /verifyonly and it seems happy. I've verified that the new `Volume Shadow Copy" service starts when I start the backup operation. Any suggestions?

    Read the article

  • How do partitions help in optimizing the harddrive?

    - by Fasih Khatib
    I was recently reading a guide on Tom's Hardware about how to optimize the harddrive. They listed creating partitions as one of them. They said keeping the various files seperate is a good idea as it reduces the read/write cycles required. Now my querry is: what size partitions do i make for my 500gb harddrive. Its completely blank. I will be installing WIN7 in it. My usual strategy is to divide it into two equal partitions. Is it the optimum size?

    Read the article

  • Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

    - by aceinthehole
    If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

    Read the article

  • Where should I go to learn about networking? [closed]

    - by Ollie Saunders
    I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

    Read the article

  • After low level formatting can microsoft track previously pirated windows installed on pc

    - by Neelabh
    I am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

    Read the article

  • Installing raid controller forces reinstall of Windows Server 2008

    - by Tyler
    So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

    Read the article

  • Fullscreen Video stutters on second monitor laptop

    - by nobrandheroes
    Fullscreen video on my new 1080p monitor is choppy when it comes from my laptop. The same video plays when not full screen. This goes for all video(Flash/MKV, etc), regardless of video resolution. I have an ATI Mobility Radeon HD 4200 Series card in my Thinkpad Edge, Turion X2 2GHz. The computer plays 1080p fine. Things I've tried: Updating Drivers Switching cables Turning Hardware Acceleration Changing video players process priority Rebooting Turning of laptop screen Turning off unused processes Nothing Works. What is the likelyhood that my laptop cannot power a 1920x1280 display?

    Read the article

  • Ubuntu server failing daily

    - by deanvz
    Symptoms: Server becomes unresponsive - Increase in load, all services stop Loss of connectivity - Ping/SSH Flush MySQL hosts after reboot - As MySQL refuses new connections Intermittent Apache crashes Generally happens early morning hours - 2 days of the week are however excluded Changes made: Updated the OS - to Ubuntu 10.04.4 LTS Not sure if the MySQL server was also updated in the process Current MySQL version - mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (x86_64) using readline 6.1 Updated Plesk from 10.4.4 Update #47 to 11.0.9 Update #23 Rebooted on almost daily basis All crons stopped for the times corresponding to the server crashes Created a MySQL log to monitor the lock times on queries Possible causes: Failing hardware Incorrect software configuration (MySQL, Apache etc) Responsibilities: Small webserver Runs our billing system - WHMCS Responsible for CRONs Bulk-email solution - No delivery times coincide with server crashes Proposed solutions: Move machine over to VM Format and restore the Plesk server backup and take it from there? Side notes: Seems to be a general Apache failure across all our linux servers - Intermittent problem Are we doing something fundamentally wrong in the Apache config? (I understand that this is a secondary question, just making sure that it isnt possibly holding any relevance)

    Read the article

  • High CPU usage on Linux machine

    - by user305210
    I have a piece of java code running on two different machines, but on one of the linux machines, the code uses alot of CPU (close to 100% cpu usage). On the other machine the same code uses less cpu (under 3 to 4%). The machine where cpu usage is high, is a more powerful machine, more CPU and and more memory. This has started happening recently and performance on the machine with high cpu usage has degraded significantly. I am wondering if anyone has any ideas why something like this could happen, possible causes behind this etc. any guesses? No recent changes in hardware were made, no recent code updates... Thank you.

    Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >