Search Results

Search found 7325 results on 293 pages for 'windows7 32'.

Page 212/293 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

  • Bypassing SQUID on freebsd with PF

    - by epema
    I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

    Read the article

  • Setting up a Network Bridge on Linux VM (Windows 7 Host)

    - by GrandAdmiral
    I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

    Read the article

  • What does this diagnostic output mean?

    - by ChrisF
    I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

    Read the article

  • BSOD: PFN_LIST_CORRUPT and IRQ_NOT_LESS_OR_EQUAL

    - by David Lively
    I built a desktop about a year ago that has, until a few weeks ago, been running without a hitch using Windows 7 Ultimate. Recently, the PC started occasionally rebooting with a blue screen indicating a "PFN_LIST_CORRUPT" error. Also, I've seen at least once the error IRQ_NOT_LESS_OR_EQUAL. I seem to remember temporarily connecting an internal DVD burner about the same time this happened. I burned a DVD for another machine and promptly removed the drive. Yesterday, I reformatted the drive and installed Win7 Ultimate x64. During the first install, the PFN_LIST_CORRUPT bluescreen reared its ugly head again. A second install attempt completed with no errors. The fact that this error happened during a clean install leads me to believe that this is not a driver or OS issue. I also ran the memory diagnostic from the Win7 32-bit install DVD. It completed both passes with no errors. Periodically, the screen will flicker, as if explorer or the video are resetting. In the event log, I see a series of 8 or so errors indicating that some services unexpectedly stopped, and were apparently reset. These include an HID service and some others (I don't have a list in front of me). The PC is a Phenom X2 3 Ghz with a 500GB Seagate drive, 4GB of Corsair XMS2 cm2x2048-6400c5c. Anyone know what would suddenly cause a couple of sticks of RAM to go bad?

    Read the article

  • Word 2007 won't run, tries to reinstall, fails with error 1402.

    - by eidylon
    Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

    Read the article

  • Rename Active Directory domain following Windows 2000 -> 2008 migration.

    - by ewwhite
    I'm working with a site that needs an internal DNS domain rename. It currently has a DNS name of domain.abc.com and NT name of ABC. I'm trying to get to a DNS name of abctrading.com and NT name of ABCTRADING. Split DNS would be used. The site originally ran from a single Windows 2000 domain controller hosting AD, file, print, DHCP and DNS services. There was no Exchange system in the environment. The 50 client PCs are all Windows XP with a handful of users using roaming profiles. All users are in a single OU and there are no group policy/GPOs. I'm a Linux engineer, but have been trying to guide another group of consultants to reach a more suitable setup. With the help of this group, we were able to move the single Windows 2000 system to a set of Windows 2008 R2 servers separated into domain controller and file/print systems (virtualized). We are also trying to add an Exchange 2010 system to this mix. The Windows 2000 server was demoted and is no longer in the picture. This is the tricky part, as client wants the domain renamed and the consultants aren't quite sure how to get through it without another 32-40 hours of testing/implementation. THey say that there's considerable risk to do the rename without a completely isolated test environment. However, this rename has to be done before installing Exchange. So we're stuck at this point. I'd like to know what's involved in renaming the domain at this point. We're on Windows Server 2008. The AD is healthy now. Coming from a Linux background, it seems as though there should be a reasonable path to this. Also, since the original domain appears to be a child/subdomain, would that be a problem here. I'd appreciate any guidance.

    Read the article

  • Can't write to samba share

    - by Tiddo
    I try to setup a samba file server, but whatever I do I can't get write access to work (reading works fine). This is my current situation: I have a local fileserver with 3 harddisks mounted at /mnt/share/disk<nr>. 2 of these use the ext4 filesystem, the third one is ntfs. This file server runs Fedora 18 32-bit. The root folders of these harddisks are owned by superman:superman, and testparm outputs the following: [global] workgroup = WORKGROUP netbios name = FILE_SERVER server string = Samba Server Version %v interfaces = lo, eth0, 192.168.123.191/8 log file = /var/log/samba/log.%m max log size = 50 unix extensions = No load printers = No idmap config * : backend = tdb hosts allow = 192.168.123. cups options = raw wide links = Yes [share] comment = Home Directories path = /home/share/ write list = superman, @users force user = superman read only = No create mask = 0777 directory mask = 0777 inherit permissions = Yes guest ok = Yes I've tried a lot to get this to work: the disk are chmodded to 777, I've tried turning off selinux, I've added the samba_share_t label to the disks and as can be seen in the above output I tried to make the smb config as permissive as I could, but still I cannot write to the share (tried from Windows 7 and another Fedora installation). What can I try to be able to write to the shares? EDIT: The replies I got so far are mostly concerned with the smb.conf. I have however tried a lot of different setup, ready made configs, and solutions to similar problems for the smb.conf file, so I suspect that the real problem is somewhere else.

    Read the article

  • Configuring SASL support in libmemcached

    - by John Keyes
    I'm trying to build libmemcached with SASL support on OS X Mountain Lion. I have built memcached (1.4.15) with SASL support: $ memcached -S -vv Initialized SASL. slab class 1: chunk size 96 perslab 10922 ... slab class 42: chunk size 1048576 perslab 1 <17 server listening (binary) <18 server listening (binary) <19 send buffer was 9216, now 3728270 <20 send buffer was 9216, now 3728270 <19 server listening (udp) <20 server listening (udp) ... I am trying to build libmemcached with SASL support too. I have tried the following: $ ./configure --prefix=/usr/local \ --with-memcached-sasl=/usr/local/bin/memcached ... $ ./configure --prefix=/usr/local \ --with-memcached-sasl="/usr/local/bin/memcached -S" ... But the resulting configuration summary is the same for both: Configuration summary for libmemcached version 1.0.11 * Installation prefix: /usr/local * System type: apple-darwin12.2.0 * Host CPU: x86_64 * C Compiler: i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C Flags: -O2 -Werror -Wall -Wextra -std=c99 -Wbad-function-cast -Wmissing-prototypes -Wnested-externs -Woverride-init * C++ Compiler: i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C++ Flags: -O2 -Werror -Wall -Wextra -Wpragmas -D_FORTIFY_SOURCE=2 -Waddress -Wchar-subscripts -Wcomment -Wctor-dtor-privacy -Wfloat-equal -Wformat=2 -Wmissing-field-initializers -Wmissing-noreturn -Wnon-virtual-dtor -Wnormalized=id -Woverloaded-virtual -Wpointer-arith -Wredundant-decls -Wshadow -Wshorten-64-to-32 -Wsign-compare -Wstrict-overflow=1 -Wswitch-enum -Wundef -Wunused-variable -Wwrite-strings -fwrapv -ggdb * CPP Flags: -I/usr/local/include * Assertions enabled: no * Debug enabled: no * Warnings as failure: no * SASL support: Am I doing something incorrectly? Thanks.

    Read the article

  • 553-Message filtered - HELO Name issue?

    - by g18c
    I am having major issues sending from my SBS2011 machine to Message labs server-13.tower-134.messagelabs.com #553-Message filtered. Refer to the Troubleshooting page at 553-http://www.symanteccloud.com/troubleshooting for more 553 information. (#5.7.1) ## I have changed the IP and hostnames from the below. I am not on any IP or domain blacklists. I have setup SPF (which includes mailchimp servers): v=spf1 mx a ip4:95.74.157.22/32 a:remote.mydomain.com include:servers.mcsv.net ~all I am sure i have setup my HELO names correctly under the Exchange Management console, sending a test email from the SBS server and looking at the header shows the following: X-Orig-To: [email protected] X-Originating-Ip: [95.74.157.22] Received: from [95.74.157.22] ([95.74.157.22:52194] helo=remote.mydomain.com) by smtp50.gate.ord1a.rsapps.net (envelope-from <[email protected]>) (ecelerity 2.2.3.49 r(42060/42061)) with ESMTP id 11/90-10010-E529C835; Mon, 02 Jun 2014 11:04:09 -0400 Received: from MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef]) by MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef%10]) with mapi id 14.01.0438.000; Mon, 2 Jun 2014 19:03:56 +0400 Is is the main helo name there OK and do i need to worry about the second Received block where the MYSBSVR.mydomain.local is mentioned? I have asked the ISP to set the reverse DNS for my IP to remote.mydomain.com but they have instead put remote.MYDOMAIN.com - would this case cause HELO lookups to classify this as not matching? Anything else I can do to find out why i am being filtered?

    Read the article

  • I/O Error on LG GSA-H12N DVD drive on Windows 7

    - by Ashwin
    I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

    Read the article

  • How do I stop VLC from stealing my volume buttons

    - by MGOwen
    when I press the volume buttons on my laptop, usually the system volume is changed. However, when I do this with VLC it "steals" the presses and adjusts it's own "volume" instead. The system volume is also changed. I can't find any way to turn this off in VLC. Does anyone know? Update: Sorry, some more details I should have included originally: VLC VERSION: 1.1.4 (and a few previous releases, back to about 1.1.0 or so, I think) OS: Win Vista Pro 32 HARDWARE: Dell 1720 laptop (the volume buttons are little buttons on the front of the unit, they may work something like "media" keyboard volume buttons) Update: The buttons seem to map to Ctrl+Alt+b and Ctrl+Alt+c (according to the shortcut key box in windows shortcut properties) but the VLC advanced preferences hotkeys screen doesn't list these as the keys it uses for volume. I changed it so there are no volume hotkeys in VLC settings - no luck it still steals the presses and adjusts the volume. Also, pressing Ctrl+Alt+b or c doesn't change my system volume, so who knows what windows or VLC are doing to recognise those volume buttons. :(

    Read the article

  • PostgreSQL pg_hba.conf with "password" auth wouldn't work with PHP pg_connect?

    - by tftd
    I've recently experimented with the settings in pg_hba.conf. I read the PostgreSQL documentation and I though that the "password" auth method is what I want. There are many people that have access to the server PostgreSQL is working on so I don't want the "trust" method. So I changed it. But then PHP stopped working with the database. The message I get is "Warning: pg_connect(): Unable to connect to PostgreSQL server: FATAL: password authentication failed for user "myuser" in /my/path/to/connection/class.php on line 35". It is kind of strange because I can connect via phppgadmin without any problems and also I can connect from my home computer with psql - again without any problems. This is my pg_hba.conf: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all password # IPv4 local connections: host all all 127.0.0.1/32 password # IPv6 local connections: host all all ::1/128 password The connection string I'm using with pg_conenct is: $connect_string = "host=localhost port=5432 dbname=mydbname user=auser password=apassword"; $dbConnection = pg_connect($connection_string); Does anybody know why is this happening ? Did I misconfigured something ?

    Read the article

  • Synaptics touchpad stops working randomly

    - by Jus12
    I have two laptops. One dell Vostro and other Vaio Z. Both have Synaptics (Yes, I have checked, and the original drivers were from Synaptics as well). On both laptops, the touchpad scrolling stops working at some arbitrary time and nothing seems to solve it except a reboot. Sometimes, it randomly starts working again. I have downloaded all latest drivers from OEM. Interestingly, when I run a program as Administrator, scrolling works in that window only. This problem is very odd. It happens without any reason and I've not been able to find a fix for more than a year. I have seen some unusual suggestions on forums (e.g., to "restore windows to a previous working state") but never any fix that solves this issue properly. I have tried installing latest drivers and I DO NOT want to restore windows to a previous working configuration. OS: Windows 7 64 bit Professional (Sony Vaio Z - VPCZ128GG) Windows 7 32 bit Professional (Dell) Edit: Temporary solution is to uninstall the synaptics driver and let Windows 7 use its default built in one. However, I really prefer the Synaptic driver because it activates the scroll button rather than the mouse wheel (useful in some apps such as MS Photo Editor)

    Read the article

  • Wireless disconnects every 30 minutes

    - by Kez
    I have had a look through all the related questions and I get the feeling my problem is unique. My wireless connection disconnects every 30 minutes, for maybe 1 to 3 seconds. If I am browsing the web while it happens, I get the page cannot be displayed error message. I have checked the event logs as I was curious to know if there was anything in there. There is. Event 8033: BROWSER - The browser has forced an election on network \Device\NetBT_Tcpip_{B919CC30-25A9-45DD-A09F-549A6262FC9E} because a master browser was stopped. Reported exactly every 30 minutes which coincides with my wireless problem. I am running Windows 7 Ultimate, 32-bit. My wireless is Realtek RTL8187 integrated into a ASUS P5K-E/Wifi motherboard. It is on a workgroup and has never been on a domain. This problem does not affect any other computers. Wireless reception is great, and I have ensured that the wireless unit is transmitting on a frequency not used by any nearby wireless basestations. How can I fix this pesky problem?

    Read the article

  • starting oracle 10g on ubuntu, Listener failed to start.

    - by tsegay
    I have installed oracle 10g on a ubuntu 10.x, This is my first time installation. After installing I tried to start it with the command below. tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1/bin$ lsnrctl LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-DEC-2010 22:46:51 Copyright (c) 1991, 2005, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> start Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.1.0 - Production System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) TNS-12555: TNS:permission denied TNS-12560: TNS:protocol adapter error TNS-00525: Insufficient privilege for operation Linux Error: 1: Operation not permitted Listener failed to start. See the error message(s) above... my listener.ora file looks like this: # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = acct-vmserver)(PORT = 1521)) ) ) I can guess the problem is with permission issue, But i dont know where I have to do the change on permission. Any help is appreciated ... EDIT## When i run with the command sudo, i got this tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1$ sudo ./bin/lsnrctl start LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-DEC-2010 01:01:03 Copyright (c) 1991, 2005, Oracle. All rights reserved. Starting ./bin/tnslsnr: please wait... ./bin/tnslsnr: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Linux Error: 32: Broken pipe

    Read the article

  • Why is my apache2, mod_fcgid, php configuration causing 100% cpu usage?

    - by Scott Lundgren
    Page load makes a quick initial connection, then hangs about 10 seconds before the page renders. When the server load goes up I start watching top & I see that both CPUs get pegged at times to 100% by between 4-8 processes of php-cgi. My theory is that since I never see RAM usage never go above 50%, that apache is able to handle the requests coming in, but is queueing them for PHP to process. What is wrong with my mod_fcgid/php configuration ? RHEL 5.4 2 Xeon E5420s @ 2.50 Ghz 4 Gb RAM Apache 2.2.3 Timeout 30 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 5 <IfModule worker.c> StartServers 2 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> mod_fcgid 2.2.10 LoadModule fcgid_module modules/mod_fcgid.so <IfModule !mod_fastcgi.c> AddHandler fcgid-script fcg fcgi fpl php </IfModule> SocketPath run/mod_fcgid SharememPath run/mod_fcgid/fcgid_shm DefaultInitEnv PHPRC "/etc/" FCGIWrapper /usr/bin/php-cgi .php MaxRequestsPerProcess 1500 MaxProcessCount 20 IPCCommTimeout 240 IdleTimeout 240 APC 3.0.19 extension = apc.so apc.enabled=1 apc.shm_segments=1 apc.optimization=0 apc.shm_size=32 apc.ttl=7200 APC cache is 43% used with a 99% hit rate

    Read the article

  • Missing BootMgr in Vista

    - by Selase
    Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

    Read the article

  • AVConv increases song duration when converting MP3

    - by chauffch
    I am struggling with the following issue. I want to convert an MP3 ADTS into pure a MP3. I am using AVConv on Ubuntu 12.10. The outcome is a file that has the same size, but the duration is now longer. $ ls -l total 6436 -rw-r--r-- 1 teuf teuf 6586514 nov. 25 09:25 Blindsided_Bon_Iver.mpga $ file Blindsided_Bon_Iver.mpga Blindsided_Bon_Iver.mpga: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo $ avconv -i Blindsided_Bon_Iver.mpga -c copy Blindsided_Bon_Iver.mp3 avconv version 0.8.4-4:0.8.4-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:50:25 with gcc 4.6.3 [mp3 @ 0x8c6e240] max_analyze_duration reached Input #0, mp3, from 'Blindsided_Bon_Iver.mpga': Duration: 00:05:29.29, start: 0.000000, bitrate: 160 kb/s Stream #0.0: Audio: mp3, 44100 Hz, stereo, s16, 160 kb/s Output #0, mp3, to 'Blindsided_Bon_Iver.mp3': Metadata: TSSE : Lavf53.21.0 Stream #0.0: Audio: libmp3lame, 44100 Hz, stereo, 160 kb/s Stream mapping: Stream #0:0 -> #0:0 (copy) Press ctrl-c to stop encoding size= 6432kB time=329.30 bitrate= 160.0kbits/s video:0kB audio:6432kB global headers:0kB muxing overhead 0.002080% $ ls -l total 12868 -rw-rw-r-- 1 teuf teuf 6586129 nov. 27 22:26 Blindsided_Bon_Iver.mp3 -rw-r--r-- 1 teuf teuf 6586514 nov. 25 09:25 Blindsided_Bon_Iver.mpga $ file Blindsided_Bon_Iver.mp3 Blindsided_Bon_Iver.mp3: Audio file with ID3 version 2.4.0, contains: MPEG ADTS, layer III, v1, 32 kbps, 44.1 kHz, Stereo Amarok shows the new file has a duration of 25:27 and has a lot of silence. Am I using an incorrect option? Is it a bug in AVConv? Any ideas how to fix it?

    Read the article

  • How can I take a one time full backup of a Windows Server without the need for a restore program?

    - by TheCleaner
    I have a Windows SBS server with about 500GB of data that I'm decommissioning but I'd like to take a final backup of the server and place it on an external USB drive. I already have multiple backups of the server on disk from the past but they are through Simpana Commvault. I'd like a backup that will simply copy the file structure, ACLs, timestamps, etc. as is to a NTFS volume on the external drive. This way if someone says "I need x file on the server you decommed" I can search the external drive real quick instead of firing up Commvault, cataloging, restore, etc. I know the built-in Windows backup is great, I just don't feel like running it for a restore job on this. I'd like an option where in the future it won't require a program to run a restore. Rather a simple mount of the drive will suffice. I believe I can use robocopy just fine, but I'm not sure if it will grab the Windows directory, system files, and full user profiles correctly even with the /ZB option. Options? Is Robocopy /E /ZB /COPYALL /DCOPY:DAT /MT:32 /R:5 /W:5 /LOG:copylog.log the way to go here?

    Read the article

  • Determining the Source of a Given File System Mount on Unix [migrated]

    - by phobos51594
    Background Recently I have run into a bit of a snag on my home FreeBSD server. I recently upgraded it to the latest stable release, and I have noticed some strange behavior with the /var partition. Originally, I had the system configured such that /var had its own partition with /var/run and /var/log in memory disks (/tmp, too). After the upgrade, I notice there is a new, fourth memory disk mounting directly to /var that I had not set up manually and is not in my fstab. It is only 28 megs or so in size and is causing problems when trying to update my ports collection. The ramdisk mounts atuomagically at boot and cannot be unmounted while in multi-user mode. If I drop to single user mode, I am able to unmount it without issue, however rebooting causes it to pop right back up. System specifications have been included at the end of the post. Question Is there any way to determine exactly what is mounting a given memory disk (or any filesystem, for that matter) after it has been mounted? Alternately, does anybody have any ideas what might have caused the new /var ramdisk to pop up? System Specification # uname -a FreeBSD sarge 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0: Thu Nov 22 14:02:13 PST 2012 donut@sarge:/usr/obj/usr/src/sys/GENERIC i386 # df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 515612 410728 63636 87% / devfs 1 1 0 100% /dev /dev/da0s1d 515612 287616 186748 61% /var /dev/da0s1e 6667808 2292824 3841560 37% /usr /dev/md0 63004 32 57932 0% /tmp /dev/md1 3484 8 3200 0% /var/run /dev/md2 31260 8 28752 0% /var/log /dev/md3 31260 512 28248 2% /var <-- This # cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/da0s1a / ufs rw,noatime 1 1 /dev/da0s1d /var ufs rw,noatime 2 2 /dev/da0s1e /usr ufs rw,noatime 2 2 md /tmp mfs rw,-s64M,noatime 0 0 md /var/run mfs rw,-s4M,noatime 0 0 md /var/log mfs rw,-s32M,noatime 0 0 Thank you in advance for any assistance.

    Read the article

  • Unable to Connect to just Google Servers

    - by Akshat Mittal
    I am in an extremely strange problem. I am unable to connect to just Google Servers. I am not able to access any site related to Google, Google.com | YouTube | Google+ | Webmaster Tools | jQuery CDN, nothing is working. I am able to open any other website (as I am posting this question on SuperUser), even the Google DNS (8.8.8.8 and 8.8.4.4) are offline. Please Help!! Update 1: Google DNS are back online, YouTube is back online. But website on domain google.com is not working (ex: play.google.com, maps.google.com, google.com/search, etc). Update 2: I am able to access Google.com (only) with (one of) its IP addresss(s) listed below: 74.125.227.41 74.125.227.46 74.125.227.32 74.125.227.33 74.125.227.34 74.125.227.35 74.125.227.36 74.125.227.37 74.125.227.38 74.125.227.39 74.125.227.40 Update 3: I consulted my friends nearby and they said that they are also experiencing the same problem. Seams like this is a major problem in this area (or India !!) The Problem is Now Solved!! I am able to open Google.com

    Read the article

  • EngineX ignores Auth Basic?

    - by Miko
    I have configured nginx to password protect a directory using auth_basic. The password prompt comes up and the login works fine. However... if I refuse to type in my credentials, and instead hit escape multiple times in a row, the page will eventually load w/o CSS and images. In other words, continuously telling the login prompt to go away will at some point allow the page to load anyway. Is this an issue with nginx, or my configuration? Here is my virtual host: 31 server { 32 server_name sub.domain.com; 33 root /www/sub.domain.com/; 34 35 location / { 36 index index.php index.html; 37 root /www/sub.domain.com; 38 auth_basic "Restricted"; 39 auth_basic_user_file /www/auth/sub.domain.com; 40 error_page 404 = /www/404.php; 41 } 42 43 location ~ \.php$ { 44 include /usr/local/nginx/conf/fastcgi_params; 45 } 46 } My server runs CentOS + nginx + php-fpm + xcache + mysql

    Read the article

  • Cannot write samba shares

    - by Batsu
    Running samba 3.5 on Red Hat Enterprise 6.1 I'm having issues sharing two folders. Here is the output of testparm: [global] workgroup = DOMAINNAME server string = Samba Server Version %v interfaces = lo, eth1 bind interfaces only = Yes map to guest = Bad User log file = /var/log/samba/log.%m max log size = 50 idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 hosts allow = 10.50.183.48, 10.50.184.41, 10.50.184.199, 10.50.183.160, 127.0.0.1 hosts deny = 0.0.0.0/0 cups options = raw [test] comment = test folder path = /usr/local/samba valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 directory mask = 0775 [test2] comment = another test path = /home/claudio/tst valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 From the Windows XP machine I'm connecting from I'm able to read test but not write, while for test2 I can't even access the folder (though I can see it listed). ls -l /usr/local ... drwxrwxrwx. 2 claudio claudio 4096 Dec 3 10:39 samba ... ls -l /user/local/samba total 32 -rwxrwxrwx. 1 claudio claudio 9 Nov 29 16:26 asd.txt -rwxrwxrwx. 1 claudio claudio 728 Dec 3 10:16 out.txt ... ls -l /home/claudio/ ... drwxrwxr-x. 2 claudio claudio 4096 Dec 3 09:57 tst ... ls -l /home/claudio/tst total 4 -rw-rw-r--. 1 claudio claudio 4 Dec 3 09:57 asd.txt Any suggestion?

    Read the article

  • How to turn off Tomcat logging in Eclipse?

    - by kirdie
    I develop a Vaadin project in Eclipse that I start through Tomcat 6 which gets started directly by Eclipse. Tomcat prints an enormous amount of log messages though on each start which makes it hard to see the output of my own Application. I have already replaced all log levels in tomcat6/conf/logging.properties by WARNING (e.g. java.util.logging.ConsoleHandler.level = WARNING) but I still get many INFO messages. How can I turn this off or restrict the log messages to WARNING? An example of the messages Okt 26, 2012 12:16:36 PM org.apache.catalina.core.AprLifecycleListener init INFO: Loaded APR based Apache Tomcat Native library 1.1.24. Okt 26, 2012 12:16:36 PM org.apache.catalina.core.AprLifecycleListener init INFO: APR capabilities: IPv6 [true], sendfile [true], accept filters [false], random [true]. Okt 26, 2012 12:16:36 PM org.apache.tomcat.util.digester.SetPropertiesRule begin WARNING: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting property 'source' to 'org.eclipse.jst.j2ee.server:saim' did not find a matching property. Okt 26, 2012 12:16:37 PM org.apache.coyote.http11.Http11AprProtocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 Okt 26, 2012 12:16:37 PM org.apache.coyote.ajp.AjpAprProtocol init INFO: Initializing Coyote AJP/1.3 on ajp-8009 Okt 26, 2012 12:16:37 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 879 ms Okt 26, 2012 12:16:37 PM org.apache.catalina.core.StandardService start INFO: Starting service Catalina Okt 26, 2012 12:16:37 PM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/6.0.32 Okt 26, 2012 12:16:37 PM org.apache.coyote.http11.Http11AprProtocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Okt 26, 2012 12:16:37 PM org.apache.coyote.ajp.AjpAprProtocol start INFO: Starting Coyote AJP/1.3 on ajp-8009 Okt 26, 2012 12:16:37 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 568 ms

    Read the article

  • FreeBSD's ng_nat stopping pass the packets periodically

    - by Korjavin Ivan
    I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

    Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >