Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 214/328 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• Dell XPS 420: Turning computer on, video ports showing static

  - by Roy Rico

  I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

  Read the article

• IIS7 Custom Errror Handling Troubles for Classic ASP Website

  - by Eaphis

  I recently upgraded a web server from IIS6 to IIS7 for a classic asp application and now experience a bizarre error. In the IIS6 set up there was a custom 500-100 page that functioned properly by capturing errors and delivering an email with error code, error source and error type values. That same structure was set up on the IIS7 machine but now the error emails contain no error information at all. They all come through values such as 'NO SPECIFIC ERROR CODE', 'NO SPECIFIC ERROR DESCRIPTION', 'NO SPECIFIC ERROR SOURCE'. Any one have some thoughts on why my custom error page cannot capture the error information?

  Read the article

• HP ML115 with P400 Smart Array Controller

  - by John

  Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

  Read the article

• IP route ppp0 + eth0 access to outside network

  - by Vitor

  I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

  Read the article

• Resizing RAID 1 Array on Dell PowerEdge with Perc 4/Di & Windows SBS 2003

  - by Scott McKinney

  I have a Dell PowerEdge 2600 with Perc 4/Di RAID card and Windows SBS 2003 installed. The original system drive was a set of 17GB drives in a RAID 1 array. Over the years, these drives have failed (individually) and been replaced by a set of 73GB drives, but the RAID array is still 17GB in size. Is there a safe procedure to resize the RAID 1 array to use the entire 73GB without destroying/corrupting the data on the array? The Perc documentation mentions a Reconstruct option with Online Capacity Expansion, but is a woefully short on the exact details. Has anyone performed this procedure successfully (or unsuccessfully)? What were the steps? Are there any gotchas I should watch out for?

  Read the article

• Weird video problem with Linux variants

  - by alex

  I decided recently I wanted to give Linux a go so I first download a Ubuntu boot CD. The boot menu came up fine, and then a glowing Ubuntu logo was in the middle of the screen for a while. Then the screen was flickering orange and black. I guess this is where the GUI should of came up. Pushing Ctrl+Alt+F1 brought me to the command prompt OK. I thought this may have something to do with Ubuntu, so I downloaded Linux Mint. The same sort of thing happened. It booted fine, displayed it's logo for a while and then flickered, only green and black this time. Does this sound like a video card problem? How can I resolve this? Many thanks

  Read the article

• Event Capturing vs Event Bubbling

  - by Rajat

  I just wanted to get the general consensus on which is a better mode of event delegation in JS between bubbling and capturing. Now I understand that depending on a particular use-case, one might want to use capturing phase over bubbling or vice versa but I want to understand what delegation mode is preferred for most general cases and why (to me it seems bubbling mode). Or to put it in other words, is there a reason behind W3C addEventListener implementation to favor the bubbling mode. [capturing is initiated only when you specify the 3rd parameter and its true. However, you can forget that 3rd param and bubbling mode is kicked in] I looked up the JQuery's bind function to get an answer to my question and it seems it doesn't even support events in capture phase (it seems to me because of IE not support capturing mode). So looks like bubbling mode is the default choice but why?

  Read the article

• How to scan the wireless devices which exist on the network

  - by amexn

  Now my team working in a network project using windows application c#. How to scan the wireless devices which exist on the network.The functionality is exactly the same thing that you see in the existing windows utilities within the windows operating system. I'm sure you experienced when you plug a wireless laptop card in, it brings up a window that shows you all of the access points it detects for connecting to. How to capture this information listed below MAC Address IP Address SSID Channel Timestamp Cipher type Encryption level Signal Strength Did i use Kismet or NetStumbler. Please suggest good library/code

  Read the article

• Override HTML Anchor Link Target inside iFrame

  - by wag2639

  We're calling an ad from an ad network to dynamically load an add using JavaScript. It makes an iFrame with the actual ad in it, a picture wrapped in an anchor tag with the target=_top. Is there a way from our page to change its target and capture the attempt to change our page. Also, our page is loaded in a C#.net program using a WebControl (I forget the actual control being used since it was a while ago). We can change the C# code but we really prefer not to because then we'd have to test it and everything. Is there a way to do this with JavaScript or JQuery?

  Read the article

• 3ware RAID in Windows 7

  - by scribbles

  Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

  Read the article

• How do i use a USB wifi device properly?

  - by acidzombie24

  I'll just say a few random things One usb wifi device i notice only worked when it plugged into my usb hub Another one worked but couldnt get full speed. It came with an extention cord and when i had it a few feet away i was able to (usually) get full speed I had a wifi card in a tower in the past and just about all laptops have it built in How do i use a USB wifi adapter properly? The first device didnt come with an extention cord and made no mention of bringing it away from the computer. When someone else tested the device he said he was getting full speed while it was plugged into his tower so i was pretty surpised. How do i use USB wifi devices properly?

  Read the article

• IIS URL Rewriting for all Inbound URLs?

  - by Rob Burke

  Hopefully a simple question although one I have found impossible to answer myself using the Googles! I have a website on IIS with the URL http://www.contoso.com/ which points to C:\www\public\ There has been a forced directory restructure so now all of the data (Default.aspx, Product.aspx, etc.) that originally resided in C:\www\public\ now resides in C:\www\public\en\ie\ - however, the IIS website document root is still C:\www\public\ So, essentially, I have a lot of inbound links to http://www.contoso.com/Product.aspx?id=1 (etc.) which are now returning 404 errors - the correct link is now http://www.contoso.com/en/ie/Product.aspx?id=1 Please consider that I can make no changes to the directory structure or the IIS document root... so must solve this issue using URL rewriting. Is it possible to capture all requests to contoso.com/* and rewrite them to contoso.com/en/ie/* ??

  Read the article

• Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

  - by GraemeF

  I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

  Read the article

• DirectSound affects system volume on WinXP

  - by Anton

  Hello guys, I'm currently developing an audio engine that is used in voice network chat software. Everything is working fine - capture/playback/mixing channels. The problem is in using it under Windows XP. I've been getting user reports with information that their global system volume is set to zero after launching the application. I'm assuming that happens because of WaveOut/DSound conflict. How can I force DSound not to affect system volume? Playback device is initialized: DirectSoundCreate8(&GUID, &pAudio, NULL); and: pAudio-SetCooperativeLevel(parentWnd, DSSCL_PRIORITY); I'm currently not able to debug the application, cause I'm using Vista and everything is OK. Hope you can help me with this issue! Thanks a Lot! Regards, Anton.

  Read the article

• Using Dynamics AX's Business Conectors to Generate Sales Orders

  - by FelipeFiali

  So, just like the title says, I need to create an application that gets data from another Database, and shoves it through Dynamics AX's throat. This data comes from a portal, not Enterprise Portal, but a PHP one. It stores some data from the order in a separate database. So as said, I need to 'import' that to AX, creating the sales orders with the data I have from the other database. Also I'd like some references on Business Conector too, does it handle all those RECIDS and references that AX uses for me? Thanks in advance. EDIT: OK, I'm able to insert records in AX's database, theres just one problem. I can't generate the internal ID. Like, the 'AccountNum' field for the CustTable. Is there a way to capture it from business connector?

  Read the article

• I install Ubuntu 13.10 and reboot and im on KDE desktop?

  - by jgamer578

  Hi I'm Jacob and I have no idea what's going on. I installed Ubuntu 13.10 today and was playing around with it for a while and dl'd a bunch of apps from software center and stuff. Eventually I installed steam and (finally) got it working. I downloaded TF2 and had some weird issue where the screen got so distorted to the point I could not play. So I dl'd a driver for my graphics card from the additional drivers app (or whatever it's called) and when it was done I restarted my computer (because it said to.) When the PC booted up it loaded the KDE desktop and I have no idea why. I had unity before I rebooted. Ubuntu 13.10 is the only OS installed on my PC, and I still have all the apps that I downloaded, but I kinda like unity (I started using Ubuntu after they switched to unity) and want it back. Thanks for reading and any help in advance, Jacob.

  Read the article

• ADSL connetion (BSNL dataone) with puppy Linux

  - by Vaibhav Garg

  I have an old PC which I want to use for internet browsing. I tried using Puppy Linux (version 4.3.1) for the same but have not been able to connect. I connect via PPPoE. My network card is RTL 8029b which is automatically detected by Puppy Linux. However, the LED indicator on the MODEM designating LAN connectivity stays off. This post is being typed from the same PC running XP, so there are no connection issues. I am a complete newbie for Linux. can somebody point me to instructions. I will be willing to give any more information if required. P.S. My MODEM is Huewei Smartax MT 882 Thanks

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• BackTrack5 R2 video driver works, but presents disturbing error message

  - by poz2k4444

  I've installed backtrack 5 R2 on my computer and everything works fine but the video driver. The solution described here does work, but whenever I start the graphics mode, a message saying that the graphics card doesn't support the configuration that is loaded. I don't know why this is happening. It doesn't change the performance of my computer, but I'd like to know why the message is arising, and what I can do to stop it. Alternatively, where can I find the configuration file that would help me understand what's going on?

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

• Delphi 10, .NET, how do I convert a hex UTF-8 string to its unicode character?

  - by Evan V.

  Hi all, I am trying to make my web app compatible with international languages and I am stuck with trying to convert escaped characters in my Delphi .NET DLL. The front end code is passing the UTF-8 hex notation with an escape character e.g for ? I pass \uE3818A. In my DLL I capture this and constract the following string '$E3828A'. I need to convert this back to ? and send it to my database, I've been trying to use Encoding.UTF8.GetBytes and Encoding.UTF8.GetString but with no luck. Anyone could help me figure this out? Thank you.

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Localize Currency for iPhone

  - by Meltemi

  I would like my iPhone app to allow the input, display and storage of currency amounts using the appropriate symbol ($, €, £, ¥, etc) for the user. Would NSNumberFormatter do everything I need? What happens when a user switches their locale and these amounts (dollars, yen, etc.) are stored as NSDecimalNumbers. I assume, to be safe, it's necessary to somehow capture the locale at the time of entry and then the currency symbol and store them in my instance along with the NSDecimalNumber ivar so they can be unwrapped and displayed appropriately down the road should the user changed their locale since the time when the item was created? Sorry, I have little localization experience so hoping for a couple quick pointers before diving in. Lastly, any insight on how to you handle this kind of input given the limitations of the iPhone's keyboards?

  Read the article

• How can I extract a value from comma separated values in Perl?

  - by Octopus

  I have a log file containing statistics from different servers. I am separating the statistics from this log file using regex only. I am trying to capture the CPU usage from the running process. For SunOS, I have below output: process,10050,user1,218,59,0,1271M,1260M,sleep,58.9H,0.02%,java Here the CPU % is at 11th field if we separate by commas (,). To get this value I am using below regex: regex => q/^process,(?:.*?),((?:\d+)\.(?:\d+))%,java$/, For the linux system I have below output: process,26190,user1,20,0,1236m,43m,6436,S,0.0,1.1,0:00.00,java, Here the CPU usage is at 10th column. What regex pattern should I use to get this value?

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >