Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 213/328 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Replacement Alternative for Dell FY606 in a Poweredge T105

  - by Mike C

  I have recently upgraded my Poweredge T105 server to use a SAS 6/ir RAID controller. Unfortunately, I did not realize at the time that adding the card would cause the BIOS to complain about a missing hard drive fan. This warning requires that a user press F1 to continue, which is disastrous in a server environment. I have searched all over found that the specific part I need is a Dell FY606 fan. However, I have yet to find a suitable retailer that covers this part. I have contacted Dell and they do not have this part in stock. Are there any alternative models of a fan that I could use in place of an FY606? Seems like a pretty straightforward part, just a fan that connects to a 4-pin power connector on the motherboard.

  Read the article

• Black Screen when Computer Boots

  - by BlueRaja

  I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

  Read the article

• Connecting desktop computer to the internet through laptop wifi

  - by Josh

  Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

  Read the article

• Enable automatic driver install in Windows XP

  - by Peter

  When Windows detects new hardware (be it graphic card or USB Peripheral) it automatically installs driver and if it can't find a driver it shows "Found New hardware wizard" that allows you to manually select a driver. My problem is that this "Found New hardware wizard" shows up every time when I plug a new device and I have to click Next Next Next.. until it finishes installation. It's just like in Windows 98 ;) I want to fix it to the way it's supposed to be. It's got nothing to do with "Windows Update" and "Driver Signing" settings in "System properties - Hardware" tab, those are on default settings. Here is the same problem I have, but those replies ale completely useless

  Read the article

• How would I add a second physical hard drive to proxmox

  - by Cygnus X

  I installed proxmox on a single 250GB hard drive and I would like to add a second identical hard drive to put more VM's on. I already tried once, and didn't get very far. I added it and formatted it as an ext4, but when I went to use the disk, it said only 8GB was available. That's not quite right. So I did some searching and found that I had to make the device ID 8e for a linux lvm. After I did this, it said I had to restart, so I did... and it wouldn't boot!!! What did I do wrong? And how do I do it right? (I know I could throw in a RAID card and do a RAID 0, but I'd rather not).

  Read the article

• Damaged XenServer Storage LVM partition table

  - by Fiolek

  I have a homeserver running under XenServer control with 3x1TB discs inside, one for XenServer and two mirrored(using Intel's fakeRAID and dmraid) for VMs and a user data(but now I think RAID didn't work). I tried to pass PCI card to VM using PCI-passthroug and I read somewhere that I need to recompile kernel with pciback module but something went wrong(I made mistake in /boot/extlinux.conf and server couldn't run) and I had to use LiveCD of GPartEd(I already had it on USB key) to correct this. But when I re-run the server all VDIs were gone. I have completly no idea what could go wrong. I tried to repair RAID using dmraid -R in the hope that everything will return to noramal but now I think this done more bad than good(and corrupted rest of LVM table...). Is there any possibility to recover this SR or only data from one(~100GB) of VDI? I also wants to apologise for my English, I'm not from English-speaking country and I'm only 16 years old, so I hadn't "time" to learn it(school isn't good place to do this) in sufficient way.

  Read the article

• How to black out second monitor when playing a full screen game?

  - by Gary

  I've got two monitors. When I play a full screen game in my primary monitor, the second monitor still shows the Windows desktop. How can I black out the second monitor so that it doesn't show anything at all? My graphics card is from ATI. I'm running Windows 7 in Boot Camp on an iMac. I don't know if this makes a difference, however, as any solution to my question will do, really. For instance, is there a tiny app that I could run to disable the second monitor for a while? I'd rather not have to open Windows display settings every time I run a game and disable the monitor that way, though.

  Read the article

• Grub install fails while installing Ubuntu on RAID

  - by Warren Pena

  I'm trying to install Ubuntu 9.10 using the alternate install CD, but I keep getting stuck. I get through the first few steps of the install process easily enough (telling it what partition to install to, what user ID and password to create, time zone, etc.), but then it suddenly pops up a menu asking me what the next step in the install process is. It has "Install the GRUB boot loader on a hard disk" selected by default. When I select it, it goes to another screen with a progress bar and a label "Installing the 'grub2' package." The progress bar gets to 16%, and then I get returned to the same menu. No matter how many times I try to install grub, the exact same thing happens. I'm trying to install Ubuntu on a two disk RAID-1 array. This is the RAID card I'm using: http://www.siig.com/ViewProduct.aspx?pn=SC-SAER12-S2. Any ideas what may be causing this to happen and how I can fix it? Thanks!

  Read the article

• Linux openSUSE 11.2 on VAIO Z890T

  - by alfredozn

  I have a VAIO Z-series (VGN-Z890T) and I want to install openSUSE 11.2. I found some guides to fix the problem for the video card switch, but all for older models, those preconfigured with windows vista. It looks like newer model use a different bios configuration to support hot swap between cards in Windows 7 and this change breaks the solution to my problem. I'm not an experienced linux user, but i was using it recently on my old computer ind definitively I want it on my laptop. I installed openSUSE once and i was trying and trying to solve it until I finished reinstall again and use a fresh installation. My question is: Does anyone has installed and configured successfully openSUSE on one of the latest vaio z laptops???

  Read the article

• PHP Exec command - How to pass input to a series of questions

  - by user556597

  I have a program on my linux server that asks the same series of questions each time it executes and then provides several lines of output. My goal is to automate the input and output with a php script. I know how to capture the output in an array by writing: $out = array(); exec("my/path/program",$out); But how do I handle the input? Assume the program asks 3 questions and valid answers are: left 120 n What is the easiest way using php to pass that input to the program? Can I do it somehow on the exec line? I’m not a php noob but simply have never needed to do this before. Alas, my googling is going in circles.

  Read the article

• UITextView text disappear

  - by user153412

  Hi, i create an uitextview dynamically then i write my text into it. Sometime, when i create the uitextview, the cursor disappear and i see no text in it. If i run the application again, i can see the text inside the textview that i've created before. I've tried to set the cursor position to zero or scroll the text to the top but it doesn't work... Any suggestion? Here is a screen capture. You can see the gray uitextview, the keyboard (the textview is the firstresponder) but no cursor or text. http://yfrog.com/hqschermata20100325a11213p PS: i'm sorry for my bad english.

  Read the article

• NIC interface names in /proc/interrupts

  - by Gallus

  When I look at /proc/interrupts: $ cat /proc/interrupts CPU0 CPU1 (...) 12: 4 0 IO-APIC-edge i8042 14: 145 65310875 IO-APIC-edge ide0 50: 0 0 IO-APIC-level uhci_hcd:usb5, Intel ICH7 58: 5388 7983508 IO-APIC-level libata 169: 812427252 1236572641 IO-APIC-level skge, eth1 217: 6 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 225: 0 0 IO-APIC-level uhci_hcd:usb3 233: 60 3108720778 IO-APIC-level uhci_hcd:usb4, skge I can see two skge and one eth1 entries. All of them are the network cards. Because of the general name "skge" (which is the name of the network driver of the card) I can't easily reocognize, which NIC occupies which interrupt. How to make linux use more descriptive names in the entries? Or: Is there any alternative way to obtain INT information instead of /proc/interrupt? My final goal is to manipulate smp_affinities of the NICs.

  Read the article

• /lib/udev/net.agent causing high CPU usage

  - by Antoine Benkemoun

  We have a number of Soekris boxes running Debian Squeeze. They were installed through an automated process consisting of using deboostrap and copying it unto a Compact Flash card. We use puppet to manage the configuration of all these boxes. Before Debian Squeeze, they were running Voyage Linux which is just a "lighter" version of Debian. Since we have switched, we're seeing the /lib/udev/net.agent process take up an aweful lot of CPU. We have so far been unable to find any clue as to what this really does and why it's taking up some much CPU time. In htop we see the following : We are seeing absolutly no syslog messages related to this process so we're a bit lost... So, I am looking for pointers as to what this process does in general and what could be the potential cause of such CPU usage.

  Read the article

• Stress test speed on a gateway?

  - by TheLQ

  I'm interested in stress testing my gateway server but am lost on how. Most of the stress testing applications I've seen only see how much load an app like Apache can handle, but not this. Essentially I want to send as many packets I can into this box with one computer on one card and see how many come out the other in another computer just to get an idea of what kind of load this can handle. I'm also interested how Snort will perform. I'm not really sure how to do this though. What tools could you recommend that could do this?

  Read the article

• Dell XPS 420: Turning computer on, video ports showing static

  - by Roy Rico

  I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

  Read the article

• IP route ppp0 + eth0 access to outside network

  - by Vitor

  I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

  Read the article

• Mainstream Linux on 1GB HDD

  - by Ariel Nundi

  Hi, I've decided to start learning Linux + Ryby + RoR. The problem is the only personal computer I have is a laptop with 1GB flash card and I can't afford to buy more hardware right now. The laptop has dual core CPU and 2GB of RAM. Can you recommend a Linux distribution I can install? I've tried the netbook version of Ubuntu, but install failed because of lack of space. I'd prefer a more popular distribution, so I can use my skills say on a job. TIA

  Read the article

• Regex for capturing numbered text list

  - by crunchyt

  I have a test list that I am trying to capture data from using a regex. Here is a sample of the text format: (1) this is a sample string /(2) something strange /(3) another bit of text /(4) the last one/ something!/ I have a Regex that currently captures this correctly, but I am having some difficulty with making it work under outlier conditions. Here is my regex /\(?\d\d?\)([^\)]+)(\/|\z)/ Unfortunately some of the data contains parentheses like this: (1) this is a sample string (1998-1999) /(2) something strange (blah) /(3) another bit of text /(4) the last one/ something!/ The substrings '(1998-1999)' and '(blah)' make it fail! Anyone care to have a crack at this one? Thank you :D

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• MacBook's Airport not working from menu bar

  - by not22

  All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83. I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• Can I drive two external screens from an 'Alu' iMac?

  - by robsoft

  I've got a 24" 2.4 Ghz Core 2 Duo iMac. It's about 18 months old, though I can't specifically remember when I bought it. It has a Displayport Mini-DVI socket on the back, and currently I have that linked to a DVI adaptor driving a Philips 20" widescreen monitor in portrait mode (awesome for browsing). I have another, identical Philips monitor and wondered if there was a way of connecting that to the iMac too. Is there such a thing as a DisplayPort Mini-DVI to dual-DVIs adaptor? Can this iMac's graphics card even drive such a set-up? The graphics chipset in the iMac is reported as ATI Radeon HS2600, 256 MB. The main iMac display is 1920x1200 and the Philips display is 1050x1680 (@60Hz, rotated 90 degrees). The third screen would be another 1050x1680 and ideally I'd have it portrait again, too. EDIT: Please let this question stand - it's not a dupe. The current Mac laptops use 'Mini Displayport' connectors, which are not the same as DisplayPort Mini-DVI connectors.

  Read the article

• Display Image from Byte Array in WPF - Memory Issues

  - by ChrisFletcher

  Hi, I've developed an application to capture and save images to a database, but I'm having an issue with memory usage. On my domain object I have 3 properties: Image - Byte array, contents are a jpg RealImageThumb - The byte array converted to a BitmapImage and shrunk, displayed to the user in a gridview with other thumbnails RealImage - Has no setter, the byte array converted to a bitmap source, this is shown in a tooltip when the user hovers over it. The issue I have is that if a user hovers over each image in turn the memory usage spirals. I realise that as a user hovers over bitmap sources are generated and the memory isn't freed up, I've tried giving RealImage a backing property and assigning this to null after but again the memory isn't freed up (waiting for the garbage colelctor?.

  Read the article

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >