Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 223/330 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83. I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• Dell XPS 420: Turning computer on, video ports showing static

  - by Roy Rico

  I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• MacBook's Airport not working from menu bar

  - by not22

  All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

  Read the article

• IP route ppp0 + eth0 access to outside network

  - by Vitor

  I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

  Read the article

• Can I drive two external screens from an 'Alu' iMac?

  - by robsoft

  I've got a 24" 2.4 Ghz Core 2 Duo iMac. It's about 18 months old, though I can't specifically remember when I bought it. It has a Displayport Mini-DVI socket on the back, and currently I have that linked to a DVI adaptor driving a Philips 20" widescreen monitor in portrait mode (awesome for browsing). I have another, identical Philips monitor and wondered if there was a way of connecting that to the iMac too. Is there such a thing as a DisplayPort Mini-DVI to dual-DVIs adaptor? Can this iMac's graphics card even drive such a set-up? The graphics chipset in the iMac is reported as ATI Radeon HS2600, 256 MB. The main iMac display is 1920x1200 and the Philips display is 1050x1680 (@60Hz, rotated 90 degrees). The third screen would be another 1050x1680 and ideally I'd have it portrait again, too. EDIT: Please let this question stand - it's not a dupe. The current Mac laptops use 'Mini Displayport' connectors, which are not the same as DisplayPort Mini-DVI connectors.

  Read the article

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

• Full Screen Flash is choppy (nVidia GeForce 8200M)

  - by Joel Martinez

  I have a new compaq presario laptop (I asked SU for advice before I bought it :-) ). It has a nVidia GeForce 8200M video card. When I try to play a flash video full screen, it plays really choppy. This is a brand new computer and is well more powerful than my previous computer so I know it's not a matter of the full screen being too processor intensive to play, or a bandwidth problem. Even playing HD hulu videos full screen was fine on my previous laptop. Any advice on how to get better performance here? edit: World Of Warcraft is able to play at a great framerate, so this machine should definitely be able to handle a simple little flash video ;-)

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by hjdx

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• 3ware RAID in Windows 7

  - by scribbles

  Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

  Read the article

• iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

  - by Goober

  The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

  Read the article

• How do i use a USB wifi device properly?

  - by acidzombie24

  I'll just say a few random things One usb wifi device i notice only worked when it plugged into my usb hub Another one worked but couldnt get full speed. It came with an extention cord and when i had it a few feet away i was able to (usually) get full speed I had a wifi card in a tower in the past and just about all laptops have it built in How do i use a USB wifi adapter properly? The first device didnt come with an extention cord and made no mention of bringing it away from the computer. When someone else tested the device he said he was getting full speed while it was plugged into his tower so i was pretty surpised. How do i use USB wifi devices properly?

  Read the article

• Resizing RAID 1 Array on Dell PowerEdge with Perc 4/Di & Windows SBS 2003

  - by Scott McKinney

  I have a Dell PowerEdge 2600 with Perc 4/Di RAID card and Windows SBS 2003 installed. The original system drive was a set of 17GB drives in a RAID 1 array. Over the years, these drives have failed (individually) and been replaced by a set of 73GB drives, but the RAID array is still 17GB in size. Is there a safe procedure to resize the RAID 1 array to use the entire 73GB without destroying/corrupting the data on the array? The Perc documentation mentions a Reconstruct option with Online Capacity Expansion, but is a woefully short on the exact details. Has anyone performed this procedure successfully (or unsuccessfully)? What were the steps? Are there any gotchas I should watch out for?

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• I install Ubuntu 13.10 and reboot and im on KDE desktop?

  - by jgamer578

  Hi I'm Jacob and I have no idea what's going on. I installed Ubuntu 13.10 today and was playing around with it for a while and dl'd a bunch of apps from software center and stuff. Eventually I installed steam and (finally) got it working. I downloaded TF2 and had some weird issue where the screen got so distorted to the point I could not play. So I dl'd a driver for my graphics card from the additional drivers app (or whatever it's called) and when it was done I restarted my computer (because it said to.) When the PC booted up it loaded the KDE desktop and I have no idea why. I had unity before I rebooted. Ubuntu 13.10 is the only OS installed on my PC, and I still have all the apps that I downloaded, but I kinda like unity (I started using Ubuntu after they switched to unity) and want it back. Thanks for reading and any help in advance, Jacob.

  Read the article

• Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

  - by GraemeF

  I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

  Read the article

• ethernet not working

  - by good boy

  i wanted to know how do i setup an ethernet connection on a laptop,my isp gave me a telephone like cable which fits the ethernet port. i guess its the ethernet cable. when i connect it, nothing happens on the pc the ethernet card(realtek pcie gbe family controller) says cable not plugged in. i am using wired connection for first time.the system is completely stable with softwares .the drivers are also automatically updated through a manufacturer installed update system. the isp says there must be some sort of light on the port. whats the problem? how do get it working.

  Read the article

• SqlDataReader / DbDataReader implementation question

  - by Jose

  Does anyone know how DbDataReaders actually work. We can use SqlDataReader as an example. When you do the following cmd.CommandText = "SELECT * FROM Customers"; var rdr = cmd.ExecuteReader(); while(rdr.Read()) { //Do something } Does the data reader have all of the rows in memory, or does it just grab one, and then when Read is called, does it go to the db and grab the next one? It seems just bringing one into memory would be bad performance, but bringing all of them would make it take a while on the call to ExecuteReader. I know I'm the consumer of the object and it doesn't really matter how they implement it, but I'm just curious, and I think that I would probably spend a couple hours in Reflector to get an idea of what it's doing, so thought I'd ask someone that might know. I'm just curious if anyone has an idea.

  Read the article

• Ultrium 3 tape drive shoe-shining, 3Mb/s: and it's not the cable

  - by mowsala

  I have a HP 960 Ultrium 3 tape drive. Since I got it, (second hand, £90) I've been experiencing shoe-shining. Writing with tar in Linux, I average about 3Mb/s write speed. I've tried replacing both the SCSI card and the cable now, both of which made no difference at all. A curiuos observation I have made is that the write rate is not consistent. Sometimes it will write for over a minute without shoeshining, but more often, just a few seconds. I've also tried several tapes, different source drives, and even writing from Windows Backup, to no avail.

  Read the article

• BackTrack5 R2 video driver works, but presents disturbing error message

  - by poz2k4444

  I've installed backtrack 5 R2 on my computer and everything works fine but the video driver. The solution described here does work, but whenever I start the graphics mode, a message saying that the graphics card doesn't support the configuration that is loaded. I don't know why this is happening. It doesn't change the performance of my computer, but I'd like to know why the message is arising, and what I can do to stop it. Alternatively, where can I find the configuration file that would help me understand what's going on?

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Computer won't power on

  - by briskmojo

  Was working fine for over a year, now won't boot. LEDs on the GFX card and one on the MOBO labeled PWR glow when plugged in, but nothing happens when I push power and shorting switch pins does nothing either. If I pop out the CMOS battery and put it back in then try the fans lurch but nothing happens. Shorting the 15 and 16 pins turns the PSU on, and when the 24pin connector is attached to the MOBO it will start up briefly then stop. If I plug in the CPU header it returns to what I described, no power but will lurch after replacing the CMOS battery. Should I be shopping for a new PSU or is there another problem maybe?

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

• Weird video problem with Linux variants

  - by alex

  I decided recently I wanted to give Linux a go so I first download a Ubuntu boot CD. The boot menu came up fine, and then a glowing Ubuntu logo was in the middle of the screen for a while. Then the screen was flickering orange and black. I guess this is where the GUI should of came up. Pushing Ctrl+Alt+F1 brought me to the command prompt OK. I thought this may have something to do with Ubuntu, so I downloaded Linux Mint. The same sort of thing happened. It booted fine, displayed it's logo for a while and then flickered, only green and black this time. Does this sound like a video card problem? How can I resolve this? Many thanks

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >