Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 226/613 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• Windows Server 2008R2 - can't change or remove the default gateway

  - by disserman

  We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

  Read the article

• Modem doesn't seem to pass internet connection to router

  - by Vian Esterhuizen

  I was supplied a Cisco DPC3825 modem by my ISP and use a Cisco E4200 as my main router. Today the Internet just stopped working, just out of the blue, I can't think of anything that would have triggered it. It's been working pretty good for the past month except for a few random blips here and there. After some trouble shooting I realized that a direct wired connection to the modem would get me Internet access but if I was wired to the router as I was before I would have no connection. Assuming it was router I connected a TP-Link WR841N but it had the exact same problem. Also, connecting to the router via Wi-Fi from multiple devices will connect me to the router but I still can't get access to the Internet. From these test, it seems that the modem just won't send Internet through to the router but is clearly connecting and able to directly connect to my PC. What I've Tried A full reset and factory reset on the E4200 A full reset on the modem (but I believe my ISP has remote access to the modem because the passwords and so on are always set back). My ISP has remotely reconfigured the modem What I Should Try What else can I try? What should I do to try to narrow down the issue? Can you figure out what the problem might be based on this information?

  Read the article

• DNAT to 127.0.0.1 with iptables / Destination access control for transparent SOCKS proxy

  - by cdauth

  I have a server running on my local network that acts as a router for the computers in my network. I want to achieve now that outgoing TCP requests to certain IP addresses are tunnelled through an SSH connection, without giving the people from my network the possibility to use that SSH tunnel to connect to arbitrary hosts. The approach I had in mind until now was to have an instance of redsocks listening on localhost and to redirect all outgoing requests to the IP addresses I want to divert to that redsocks instance. I added the following iptables rule: iptables -t nat -A PREROUTING -p tcp -d 1.2.3.4 -j DNAT --to-destination 127.0.0.1:12345 Apparently, the Linux kernel considers packets coming from a non-127.0.0.0/8 address to an 127.0.0.0/8 address as “Martian packets” and drops them. What worked, though, was to have redsocks listen on eth0 instead of lo and then have iptables DNAT the packets to the eth0 address instead (or using a REDIRECT rule). The problem about this is that then every computer on my network can use the redsocks instance to connect to every host on the internet, but I want to limit its usage to a certain set of IP addresses only. Is there any way to make iptables DNAT packets to 127.0.0.1? Otherwise, does anyone have an idea how I could achieve my goal without opening up the tunnel to everyone? Update: I have also tried to change the source of the packets, without any success: iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 1.2.3.4 -j SNAT --to-source 127.0.0.1 iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 127.0.0.1 -j SNAT --to-source 127.0.0.1

  Read the article

• HAProxy + NodeJS gets stuck on TCP Retransmission

  - by sled

  I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

  Read the article

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

• What happens to Google contacts in the People app in Windows 8

  - by Klas Mellbourn

  In the People tile in Windows 8, you can connect to your different accounts, e.g. LinkedIn, Facebook, Google contacts. I have a lot of contact information in Google Contacts that I have carefully curated. I also have Facebook and LinkedIn contacts. I have already connected Facebook and LinkedIn contacts to the People app, and it seems to work ok. If I connect my Google Contacts to the People app too, what exactly will happen to the Google contacts? Will my Google contacts be modified in any way by the People app? Merged? Synced? (I understand that they will look merged in the People app, but I am wondering what will happen to the actual Google contacts, which I often use outside the People app) For instance: If a contact is in Facebook but is missing from Google Contacts, will it be created in Google contacts? If there is a picture for a person in both Facebook and Google Contacts, will the Google Contacts picture be overwritten? If I add a field, such as "Comments" to a contact in the People app, will that comment be written to the comment field for that contact in Google Contacts?

  Read the article

• Could not continue scan with NOLOCK due to data movement during installation

  - by dbdev1

  Hi, I am running Windows Server 2008 Standard Edition R2 x64 and I installed SQL Server 2008 Developer Edition. All of the preliminary checks run fine (Apart from a warning about Windows Firewall and opening ports which is unrelated to this and shouldn't be an issue - I can open those ports). Half way through the actual installation, I get a popup with this error: Could not continue scan with NOLOCK due to data movement. The installation still runs to completion when I press ok. However, at the end, it states that the following services "failed": database engine services sql server replication full-text search reporting services How do I know if this actually means that anything from my installation (which is on a clean Windows Server setup - nothing else on there, no previous SQL Servers, no upgrades, etc) is missing? I know from my programming experience that locks are for concurrency control and the Microsoft help on this issue points to changing my query's lock/transactions in a certain way to fix the issue. But I am not touching any queries? Also, now that I have installed the app, when I login, I keep getting this message: TITLE: Connect to Server Cannot connect to MSSQLSERVER. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 67) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=67&LinkId=20476 BUTTONS: OK I went into the Configuration Manager and enabled named pipes and restarted the service (this is something I have done before as this message is common and not serious). I have disabled Windows Firewall temporarily. I have checked the instance name against the error logs. Please advise on both of these errors. I think these two errors are related. Thanks

  Read the article

• VSFTPD does not allow upload with virtual users

  - by Mr. Squig

  I am attempting to setup VSFTPD with virtual users on a server running Ubuntu 12.04. I have configured the server to allow for virtual users to login, but I am having trouble getting it to allow uploads. My vsftpd.conf is as follows: listen=YES anonymous_enable=NO local_enable=YES write_enable=YES local_umask=022 anon_upload_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES chroot_local_user=YES virtual_use_local_privs=YES guest_enable=YES guest_username=virtual user_sub_token=$USER local_root=/var/www/$USER hide_ids=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd rsa_cert_file=/etc/ssl/private/vsftpd.pem /etc/pam.d/vsftpd contains: auth required pam_pwdfile.so pwdfile /etc/vsftpd.passwd crypt=hash account required pam_permit.so crypt=hash I have two virtual users set up, one of which has the same name as a local user. They each have a directory in /var/www/ owned by 'virtual'. As I understand it, when a virtual user logs in this way they will appear to the system as the user virtual. Using this configuration user can log on, but cannot upload files. The error given in /var/log/vsftpd.log is: Tue Nov 20 19:49:00 2012 [pid 2] CONNECT: Client "96.233.116.53" Tue Nov 20 19:49:07 2012 [pid 1] [zac] OK LOGIN: Client "96.233.116.53" Tue Nov 20 19:49:11 2012 [pid 2] CONNECT: Client "96.233.116.53" Tue Nov 20 19:49:11 2012 [pid 1] [zac] OK LOGIN: Client "96.233.116.53" Tue Nov 20 19:49:11 2012 [pid 3] [zac] FAIL CHMOD: Client "96.233.116.53", "/test.ppm 644" I have tried changing the permissions of these directories in all sorts of ways, but nothing seem to work. I have a feeling that it is something simple related to permissions. Any ideas?

  Read the article

• Router slowing my connection?

  - by Roberto

  I have a Linksys WRT54G and I pay for a 12Mbps connection. I've been testing my connection using speedtest.net for many days and always get 8Mbps. I called the support and they told me to bypass the router and test. I did it and got 16Mbps (much more than I pay for), so I thought "this guy just changed my speed so can he blame my router", and he blamed it. But to my surprise, everytime I bypass the router I get 16Mbps and when I use the router I get 8Mbps. Is this guy trolling me somehow (configuring the VOIP-modem-stuff to different profiles depending o the MAC address connecting to it) or is my router a POS? How can I find out? I don't know what's the thing the router connects to, it's a kind of VOIP adapter; the link is this one, but unfortunately I don't think you'll understand because it's in Portuguese. I know they can remotely connect to it, that's the origin of my conspiracy theory :) I just tested wired to the router and got 10Mbps (and still 8Mbps on wifi and 16Mbps without router) O_o I'm 5cm away from my router, so no obstacles to interfere, right? ------ UPDATE ------- It's a WRT54G V8, I'm using firmware v8.00.7 (will install 8.00.8 tomorrow, but I saw that it's only a minor fix to UPnP denial of service security vulnerability). Results: IPerf LAN-LAN: 80Mbps IPerf LAN-WLAN: 19Mbps (therefore we can ignore wireless issues/settings) I wasn't able to make the (W)LAN-WAN NAT-enabled test with IPerf, I get a connection refused error. I'm not sure if did it right: ran in server mode, configured router to forward that port to my IP and tried to connect to my internet IP that got from this site. I don't think there is a way to disable NAT using this firmware. Question: Let's suppose it's an underpowered hardware issue. Is it right to assume that custom firmwares could resolve the issue because they are possibly better implemented and would make better use of the router resources? I couldn't find any references pointing to wired performance improvements with the use of custom firmware.

  Read the article

• pfsense 2.0.1 Firewall SMB Share not showing up under network

  - by atrueresistance

  I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

  Read the article

• Localhost problems on Mac OS X 10.7

  - by Maya

  Sorry for the duplicate post ( http://stackoverflow.com/questions/9720871/localhost-problems-on-mac-os-x-10-7 ), but I got the advice that this is a better place to ask my question: I want to access a mysql server remotely over ssh. So I used port forwarding to access the remote 3306 port on my localhost as 8383. The ssh connection can established successfully. But when I want to telnet onto port 8383 on localhost I get the following error: ~: telnet 127.0.0.1 8383 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host I tried the same on a friends Laptop (also Mac OS X 10.7) and it worked fine, so it is very unlikely that the ssh connection is the problem. I assume it has something to do with my local network configuration. I turned off IPv6, just in case. My /etc/hosts looks like this: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I would greatly appreciate any help. Please point me in the right direction if this is not the right place to ask this question.

  Read the article

• Microsoft Remote Desktop Services - Android

  - by Matt Rogers

  We have recently started testing Remote Desktop Services. We have deployed the environment using the latest server, Windows Server 2012 R2. We have deployed the Web Access Roles, RD Gateway, Connection Broker Virtualization Host and Session Host. We are running both, Virtual machine-based and Session-based deployments. All of these are working as expected internally and externally when using a Windows workstation as the RDS client, however, the Android client is unable to launch applications. Once you install the app from Google Play you are given a screen to add Remote Resources. After entering the appropriate URL, username and password we see the applications that have been published. Unfortunately, when we attempt to launch an app we get the following error: Connection Error Host not found. Please provide the fully-qualified name or the IP address of the host. We have already entered this information otherwise I don't believe we would be able to see the published applications. I think the error is related to the certificate and how it is being used to connect to the applications. Since this is in our lab environment we have not configured a valid external certificate on the servers and the trusted certificate that is installed on the android tablet points to our internal server / domain name. What I would like to know: Has anyone configured RDS Web Access on Server 2012 R2 and attempted to externally connect an Android or iOS device using the Microsoft supported Remote Desktop client. Are others experiencing the same problem we are? Were you able to resolve the issue? Was it related to the external cert / host name?

  Read the article

• How to setup DNS server behind a VPN

  - by Brian

  I want to host some websites behind a VPN and I need some help with the finer points of the configuration. Thus far I've settled on OpenVPN + Bind9 and I want to configure the domains like this: External DNS mail.example.com www.example.com vpn.example.com I want to be able to connect to the vpn using 'vpn.example.com'. Once connected I then want to be able to resolve anything which is '*.vpn.example.com' with the DNS server sitting behind the VPN. I know that OpenVPN can push DNS servers to clients when they connect. I am having trouble though with the DNS config, both internal and external. I've gone through a few tutorials etc. and tried to reason about it myself but I'm not getting anywhere. So my main question would be does the above configuration make sense? If so, any general pointers or examples would be greatly appreciated. Here's what I've tried so far based on this tutorial (I've redacted my domain with example.com). When I try the tests with dig at the end to check the resolution is working it fails. db.vpn.example.com $TTL 15m vpn.example.com. IN SOA ns.vpn.example.com. [email protected]. ( 2009010910 ;serial 900 ;refresh 900 ;retry 900 ;expire 900 ;minimum TTL ) vpn.example.com. IN NS ns.vpn.example.com. ns IN A 192.168.0.2 test IN A 192.168.0.2

  Read the article

• How do I fix this Windows 7 wireless connectivity issue?

  - by Charles Randall

  I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

  Read the article

• How to restore infrared support in Windows XP?

  - by Emil Rasmussen

  My infrared port is not working on my Windows XP SP 3 (Thinkpad X60). I can see it Device Manager, and it's status is, that it is working probably. The problem manifests in several ways. Originally I was trying to transfer data from my Polar RS800CX watch, and the Polar ProTrainer 5 software gave me the this error message: "Communication port couldn't be opened". Then I tried to connect the watch to another computer, and the infrared connection was established immediately. I then tried to connect the other computer to my Thinkpad X60. The other computer again immediately showed the Wireless Link icon "'computername' is in range" in the notification area. But nothing is shown on the Thinkpad, and a file transfer to the Thinkpad is unsuccessful with an error message that reports that "the target machine actively refused it [the connection]". This brings me to conclude that the infrared support in Windows on the Thinkpad is somehow broken. This is further supported by the fact that I can't find the "Wireless Link" icon in the Control Panel and when I try to run the irprops.cpl nothing happens. So the question is, how to reinstall the infrared support? Some of the solutions that I have explored is: I have tried to disable/enable the infrared in the BIOS - to trick a re-installation. The IR modules settings on the other computer that can get a successful IR connection is an exact match to the ThinkPad that can't get a connection. The was a problem in Windows XP SP 2 with the Wireless Link icon - MS KB article - but that hotfix can't be applied on SP 3 installation. I also guess that the hotfix is included in SP 3. Any other suggestions?

  Read the article

• Distributed development staff needing a common IP range

  - by bakasan

  I work on a development staff that is geographically distributed, mostly all throughout the state of CA, but several key members also must travel frequently. We rely quite heavily on a 3rd party provider API for a great deal of our subsystems (can't get into who it is or what they do). The 3rd party however is quite stringent on network access and have no notion of a development sandbox. Access is restricted to 2, 3 IP numbers and that's about it. Once we account for our production servers, that leaves us with an IP or two to spare for our dev team--which is still problematic as people's home IP changes, people travel, we have more than 2 devs, etc. Wide IP blocks are not permitted by the 3rd party. Nor will they allow dynamic DNS type services. There is no simple console to swap IPs on the fly either (e.g. if a dev's IP at home changes or they are on the road). As none of us are deep network experts, I'm wondering what our viable options are? Are there such things as 3rd party hosts to VPNs? Generally I think of a VPN as a mechanism to gain access to a home office, but the notion would be a 3rd party VPN that we'd all connect to and we'd register this as an IP origin w/ our 3rd party. We've considered using Amazon EC2 to effectively host a dev environment for each dev and using that to connect. Amazon only gives you so many static IPs however (I believe 5?) so this would only be a stop gap solution until our team size out strips our IP count at Amazon. Those were the only viable thoughts that I had, but again, I'm far from a networking guy. Tried searching for similar threads, but I'm not even sure I know the right vernacular to look around for.

  Read the article

• Sql Server Management Studio: Change Prefix or Suffix characters

  - by PhantomDrummer

  I have an instance of SSMS 2008, for which the option to edit data in a table doesn't work. If I right-click on any table in the Object Explorer and select 'Edit top 200 rows' I get an error dialog 'Invalid prefix or suffix characters. (MS Visual Database Tools)'. The error seems to be associated specifically with SSMS, not with SQL Server (because this SSMS instance gives the same error no matter what database I connect to, but I've verified I can connect to some of the same databases using SSMS on other machines without the error). (However, our firewall prevents me using SSMS on other machines for some crucial tasks, so I do need to fix the problem). Googling for the error suggests that I should change the prefix, suffix or escape character, but without any indication of how you can make that change in SSMS. I'd also note that I'm not aware of having done any customization on SSMS since installing it, so would be surprised at having to make such a change now. Does anyone have any idea what the error message means or what I can do about it? Or how I can change the prefix/suffix/escape characters if that is really the problem.

  Read the article

• RDP problem with Vista and Windows 7 destination

  - by MadBison

  I use a server a home to host a bunch of concurrently running Hyper-V VM's with different OS's and software for testing. I have Vista on the laptop, all latest SP's and patches. The server is Server 2008 R2, fully patched. The guests are a mix of XP, Vista, Server 2008 and Windows 7. If I connect to the Win XP or Server 2008 guest using RDP, it is always good. Very quick, no speed issues. If I connect to the Vista or Win 7 guests, the response time is so slow it is unusable. Usually 6 or 8 seconds, and at times it is to long to measure! This happens from both the laptop running Vista, and the server running Server 2008 R2. Does anyone know what the issue is with RDP on Vista and Windows 7 destinations? I did read this: http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp and that is not the problem I have applied that change to all PC's.

  Read the article

• Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

  - by Alexander Skwar

  I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates (which is of course more secure, but more complicate to get going…). So I compiled OpenConnect v4.06 from http://www.infradead.org/openconnect/. As a very basic test, I tried to build a connection by manually invoking openconnect, passing along the key and cert files, like so: /lib/ld-linux.so.3 --library-path /opt/lib \ /opt/openconnect/sbin/openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 It fails :( Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Using client certificate '/[email protected]/OU=Company VPN' 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Loading private key failed (see above errors) Loading certificate failed. Aborting. Failed to open HTTPS connection to <ip> Failed to obtain WebVPN cookie When I run the same command with the same cert/key files on a Ubuntu 12.04 box, it works: openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Extra cert from cafile: '/CN=Company AG VPN CA/O=Company AG/L=Zurich/ST=ZH/C=CH' SSL negotiation with <ip> Server certificate verify failed: self signed certificate Certificate from VPN server "<ip>" failed verification. Reason: self signed certificate Enter 'yes' to accept, 'no' to abort; anything else to view: yes Connected to HTTPS on <ip> GET https://<ip>/ […] Well… The error on the NAS is this: 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Any ideas, what's causing this? On Syno, I use OpenConnect 4.06. On Ubuntu, I just compiled and installed to a custom location OpenConnect 4.06 as well. Thanks, Alexander

  Read the article

• Remote Desktop Connection to the same screen as on the monitor?

  - by Ricket

  I'm running Windows Home Server on, well, my server. It's in my entertainment center, hooked to my TV, and I use it to listen to music and watch movies. Right now I have a keyboard and mouse stuck beside my TV so that I'm able to load a movie. It would be nice, though, to be able to remotely control the screen. Remote Desktop Connection seems to open its own session in the background, separate from the session shown on the monitor. This doesn't do any good because things started via remote desktop must be closed or changed via remote desktop, and I can't start a movie with remote desktop and then see it from the screen. Is there a way to get Remote Desktop Connection to connect to the visible screen? I am currently using UltraVNC; it was doing the job, but it has its quirks. For instance, the problem just now that prompted me to ask this question; upon trying to connect, UltraVNC informs me that "Server closed connection - The server running as application". This is just one of several problems I've had with it, and I want something that is as reliable and low-maintenance as the built-in Remote Desktop Connection. (and free) If the answer to the above is no, I'm welcome to recommendations for a different remote desktop system to try.

  Read the article

• sql developer cannot establish connection to oracle db with listener running

  - by lostinthebits

  I am working from home and connected to my work's vpn. I have tried to connect to the work db with sql developer (the latest version and the previous version) on the following environments: mac os x 10.8.5 (with sql developer launched and installed directly on the iMac. sql developer launched and installed directly on a vm on same computer (guest Ubuntu 12.04 LTS) sql developer launched and installed directly on a vm on same computer (guest Windows 7.0 Professional) I get Status Failure Test Failed : IO Error - The Network Adapter could not establish the connection. I have read dba forums and googled and the most common suggestion is that the oracle listener is not up and running. I can conclusively say this is not the case because I have the option of using remote desktop and accessing the oracle db in question on my work computer. If the listener was down, according to my DBA, no one would be able to connect. My sysadmin and dba are stumped so I assume it is something unique to my home system. The reason I do not want to continue with the remote desktop workaround is because remote desktop has an annoying (infuriating often) lag.

  Read the article

• Error 720 on VPN (PPTP) attempt

  - by Andy Shulman

  When I attempt to connect to a server running XP x64 (so essentially Server 2003) using a PPTP connection, it fails with client-side error Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this configuration. and server-side error Event ID: 20050 The user WINSERV3\Andy connected to port VPN8-1 has been disconnected because no network protocols were successfully negotiated. I have configured the router to pass both TCP packets on 1723 and GRE packets. I have used Wireshark (filtering out ARP, UDP, and all TCP ports other than 1723) to observe the packets received by the server. Wireshark does not explicitly name any protocol GRE, but it does tell me the server sent and received TCP, PPTP, PPP LCP, PPP CHAP, PPP CBCP, and PPP IPCP. The connection seems to go wrong at packet 30, where the protocol is PPP LCP, with the payload of the packet being labeled "Protocol Reject". Obviously, this is going from server to client. This would seem to lead to the conclusion that there is something wrong with my client, which runs Windows 7 Ultimate x64. However, it is able to connect to my house's router, which runs the DD-WRT firmware and is thus a PPTP endpoint. I'm thoroughly at a loss. Please help!

  Read the article

• Can't successfully run Sharepoint Foundation 2010 first time configuration

  - by Robert Koritnik

  I'm trying to run the non-GUI version of configuration wizard using power shell because I would like to set config and admin database names. GUI wizard doesn't give you all possible options for configuration (but even though it doesn't do it either). I run this command: New-SPConfigurationDatabase -DatabaseName "Sharepoint2010Config" -DatabaseServer "developer.mydomain.pri" -AdministrationContentDatabaseName "Sharepoint2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureString "%h4r3p0int" -AsPlainText -Force) Of course all these are in the same line. I've broken them down into separate lines to make it easier to read. When I run this command I get this error: New-SPConfigurationDatabase : Cannot connect to database master at SQL server a t developer.mydomain.pri. The database might not exist, or the current user does not have permission to connect to it. At line:1 char:28 + New-SPConfigurationDatabase <<<< -DatabaseName "Sharepoint2010Config" -Datab aseServer "developer.mydomain.pri" -AdministrationContentDatabaseName "Sharepoint 2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureS tring "%h4r3p0int" -AsPlainText -Force) + CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase: SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPExcep tion + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon figurationDatabase I created two domain accounts and haven't added them to any group: SPF_DATABASE - database account SPF_ADMIN - farm account I'm running powershell console as domain administrator. I've tried to run SQL Management studio as domain admin and created a dummy database and it worked without a problem. I'm running: Windows 7 x64 on the machine where Sharepoint Foundation 2010 should be installed and also has preinstalled SQL Server 2008 R2 database Windows Server 2008 R2 Server Core is my domain controller that just serves domain features and nothing else I've installed Sharepoint according to MS guides http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx installing all additional patches that are related to my configuration. Any ideas what should I do to make it work?

  Read the article

• How can a CentOS 6 guest running in VirtualBox be configured as a LAMP server that can be accessed from the Windows host?

  - by jtt89

  I was able to conect Centos6 on Virtual Box to Windows (I can ping in both directions) with Host-only Adapter (for connection between the two) and NAT Adapter (to enable Linux on VB to connect to the Internet). I want to set up httpd, mysql and vsftpd servers and in the end easily connect to httpd from Windows based browser and ftp server with a Windows based client as well. I would also want to have access through SSH. I have a general idea of the steps that are involved, but there is also a configuration that I am not sure about at this point. Lets say I follow these steps: yum install httpd yum install php php-pear php-mysql yum install mysql-server mysql_secure_installation yum install vsftpd yum install mod_ssl Technically I have everything installed, but what would be the next steps that I need to take (from the networking point of view, so to speak) to get it all working)? I know I need to configure, at least Apache, and ftp server, but I am not sure how is it gonna work; like where am I gonna be uloading the sites (I know this can vary), how am I gonna know what address to use in a browser if I wanna go to a website x, y, z on that installation etc. This sounds like I need to do some kind of DNS setup and I am kind of stuck at this point. If somebody could give me a general outline of what are the things that need to be done that would be great (I was looking at a lot of websites and I know about etc/sysconfig/network, httpd.config - not too much about it on Apache's site, hostname, hostname -f etc; but it is kind of hard to piece it all together at this point). I am gonna be looking at the books also, but they not always reflect the setup that I have too (VirtualBox). Thank you.

  Read the article

• TomTom GO & Ubuntu Linux: impersonating a GPRS phone with dund

  - by Broam

  Background: I've called TomTom support, and they don't support Linux. I can get my GO 730 to mount Mass Storage, and I found a shell script that will allow me to install maps (haven't tried it; will update when I do.). As of note: USB 2.0 only. 1.1 ports will not work. However--I still can't update the TomTom or take advantage of any traffic services. The GO will connect to a mobile phone, but I don't have one that supports tethering. However, I've found a site that claims to know a way to get a Linux Machine to impersonate a phone advertising GPRS services and it apparently works in Fedora as old as FC4. I'm having some serious trouble getting this to work on Ubuntu 9.10 Karmic, mainly because I think some of the built-in bluetooth stuff is getting in the way. Changing the class bits in main.conf (hcid.conf does not exist) doesn't crash..., and dund starts and listens, but the TomTom device never seems to want to connect to my machine. I haven't played around much with sdcptool (I think that's the name, not in front of a Linux machine right now) but maybe I have to advertise the DUN profile...I'm not very sure. My Question: I have no way to diagnose the problems. What are some diagnostic tools I can use to help dig down and figure out what's going on? Update: apparently dund is a legacy tool that's going away. What replaces it?

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >