Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 228/613 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Replacing stock Core 2 Duo heatsink fan (just the fan really) with a Dell CPU fan

  - by user647345

  My old heatsink fan broke and I'm trying to reconnect its plugs to a new fan. My Dell CPU fan has some custom Dell plug. I snipped the old fan's wire in half and kept the plug on the end of it. I want to connect it to the Dell fan wire to the plug. The motherboard is a P5Q-e, the stock Core 2 Duo fan was .20A and the dell is .70A. Is that going to matter? The wire from the fan has four wires, the wire with the plug has four wires. They share three, of the four colors: red, black, and blue. Dell's fourth wire is white, while the plug's fourth wire is yellow. Is it safe to assume that I just connect the yellow and the white plug together and match the rest up? I don't want to take any risk of damaging anything. It runs fine passively without a fan, but I have speedstep on, so I would like to use this fan and just fasten it to the heatsink with some twist ties and paperclips and call it a day.

  Read the article

• How to handle server failure in an n-tier architecture?

  - by andy

  Imagine I have an n-tier architecture in an auto-scaled cloud environment with say: a load balancer in a failover pair reverse proxy tier web app tier db tier Each tier needs to connect to the instances in the tier below. What are the standard ways of connecting tiers to make them resilient to failure of nodes in each tier? i.e. how does each tier get the IP addresses of each node in the tier below? For example if all reverse proxies should route traffic to all web app nodes, how could they be set up so that they don't send traffic to dead web app nodes, and so that when new web app nodes are brought online they can send traffic to it? I could run an agent that would update all the configs to all the nodes, but it seems inefficient. I could put an LB pair between each tier, so the tier above only needs to connect to the load balancers, but how do I handle the problem of the LBs dying? This just seems to shunt the problem of tier A needing to know the IPs of all nodes in tier B, to all nodes in tier A needing to know the IPs of all LBs between tiers A and B. For some applications, they can implement retry logic if they contact a node in the tier below that doesn't respond, but is there any way that some middleware could direct traffic to only live nodes in the following tier? If I was hosting on AWS I could use an ELB between tiers, but I want to know how I could achieve the same functionality myself. I've read (briefly) about heartbeat and keepalived - are these relevant here? What are the virtual IPs they talk about and how are they managed? Are there still single points of failure using them?

  Read the article

• Remote desktop solution where the desktop sharing party contacts the computer it wants to share with

  - by Kent

  I'm in a situation where I act as a sort of techinical support to my family and less techinically experienced friends. I'm looking for a remote desktop solution where it's possible to setup a "zero-install, double click an icon"-solution where the client computer contacts me so that I may interact with their desktop. The last part is important as the people in need of my help don't know how to configure their router or even the firewall software on their own computer. They are able to click an accept button when asked if a program should be able to make outgoing connections. They have many different kinds of routers, as well as software firewalls, and I rather not deal with the problem of how to connect to them using whatever as well as the actual problem they are having. It must be: Free of charge for non-commercial use. Possible to use it in a mode where the computer wanting to share its desktop should be able to make a connection to my computer. My computer has a DNS name we can use. Compatible with both Windows XP and Windows 7. Independent of a third party server or infrastructure. Explanations of the above: I don't want to spend money on it when I help them for free. If it's free as in freedom, all the better! I guess this boils down to being callable like showdesktopto.exe opscomputer.com where opscomputer.com is my computers DNS name. If that is possible then I can create a shortcut they can use to connect to me when they need help. It's nice if it's possible to specify a password or key file which I can use to authenticate myself, but it's not required. They use the OS which their machine comes installed with. That means Windows XP or 7. I want something which will work in the long run. Using a third party service which might not be available when I need it disqualified such solutions.

  Read the article

• How to troubleshoot connectivity when curl gets an *empty response*

  - by chad

  I want to know how to proceed in troubleshooting why a curl request to a webserver doesn't work. I'm not looking for help that would be dependent upon my environment, I just want to know how to collect information about exactly what part of the communication is failing, port numbers, etc. chad-integration:~ # curl -v 111.222.159.30 * About to connect() to 111.222.159.30 port 80 (#0) * Trying 111.222.159.30... connected * Connected to 111.222.159.30 (111.222.159.30) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.19.0 (x86_64-suse-linux-gnu) libcurl/7.19.0 OpenSSL/0.9.8h zlib/1.2.3 libidn/1.10 > Host: 111.222.159.30 > Accept: */* > * Empty reply from server * Connection #0 to host 111.222.159.30 left intact curl: (52) Empty reply from server * Closing connection #0 So, I understand that an empty response means that curl didn't get any response from the server. No problem, that's precisely what I'm trying to figure out. But what more specific info can I derive from cURL here? It was able to successfully "connect", so doesn't that involve some bidirectional communication? If so, then why does the response not come also? Note, I've verified my service is up and returning responses. Note, I'm a bit green at this level of networking, so feel free to provide some general orientation material.

  Read the article

• IIS running but not serving content

  - by Kyle

  I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

  Read the article

• Remote Desktop access Windows 7 system from Windows 8

  - by Prabhat

  I have 2 systems; Windows 7 & Windows 8. Both are connected to WiFi router. They have been assigned address 192.168.2.8 & 192.168.2.9 respectively. I have added them to home group. I am able to ping and connect Windows 8 system from Windows 7. I am having trouble connecting Windows 7 system from Windows 8 system. I can't even ping Windows 7 system. Windows 7 system's user is administrator (default administrator account from secpol.msc). File sharing, Remote Access, network discovery are all enabled. Someone please help me connect. EDIT : I found that this is the issue of Kaspersky Internet Security 2012. If I disable firewall, it works. I tried opening port 3389 in Kaspersky. It is still blocking access.

  Read the article

• Windows 7 - Windows XP - sharing - why isn't working?

  - by durumdara

  Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

  Read the article

• Cannot access host from a virtualbox guest using bridged adapter

  - by David Dai

  I have a windows 7 host with firewall turned off. And I have a windowsXP guest running on Virtualbox 4.2.4r81684. In my windowsXP guest I tried to connect to the FTP server on my host machine(which used to work well) but it didn't work. I tried to ping my host machine, but it didn't work either. Then I tried to ping my guest from host, it worked well. my guest ip is :192.168.1.95 my host ip is : 192.168.1.9 route table on guest machine is this: C:\Documents and Settings\wenlong>route PRINT =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...08 00 27 66 54 6c ...... AMD PCNET Family PCI Ethernet Adapter #2 - Packe t Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.95 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.95 192.168.1.95 20 192.168.1.95 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.1.255 255.255.255.255 192.168.1.95 192.168.1.95 20 224.0.0.0 240.0.0.0 192.168.1.95 192.168.1.95 20 255.255.255.255 255.255.255.255 192.168.1.95 192.168.1.95 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None arp cache is this: C:\Documents and Settings\wenlong>arp -a Interface: 192.168.1.95 --- 0x2 Internet Address Physical Address Type 192.168.1.1 00-26-f2-60-3c-04 dynamic 192.168.1.9 90-e6-ba-c2-90-2f dynamic It's strange because there was no problem days before and I didn't make any changes to the setting. could anybody help? PS. the guest can communicate with other machines in the LAN(for example 192.168.1.114) ok. it just cannot connect to the host machine.

  Read the article

• Mysql Cluster not working on Ubuntu

  - by user53864

  I am unable to setup MySQL Cluster on ubuntu servers. As a starting point I started from the link but I am not successful and the tar ball version I download is 6.3.45. As I wanted to test the mysql cluster, the Data node and SQL node are same but sql never appeared as connected in management node console and it looks like below. [ndbd(NDB)] 2 node(s) id=2 @192.168.1.107 (Version: version number, Nodegroup: 0, Master) id=3 @192.168.1.108 (Version: version number, Nodegroup: 0) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.1.105 (Version: version number) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from 192.168.1.107) id=5 (not connected, accepting connect from 192.168.1.108) On all the 3 machines mysql-server & client(apt-get install mysql-server mysql-client) were already installed and I completely stopped and also removed them at the system start up. Now the mysqld is from extracted cluster tar ball(/usr/local/mysql/support-files/mysql.server). As for testing, I created a test database on both the data nodes but the tables are also not syncing on other node. I checked many links, configurations are remained similar in all the links but somewhere it's going wrong. Anymore extra package is required?, Could anyone help me here..?. I am trying this for past 3 days... Thank you!

  Read the article

• Do you need to advertise an AFP service via Avahi for an Ubuntu Server to show up in OSX Finder?

  - by James

  I am only advertising an NFS share plus the "model", and I don't want to install extra services on the Server unless I have to, ie netatalk, as it is used solely for NFS exports. Currently there is no entry in Finder under "Shared" with below config of Avahi. serveradmin@FILESERVER:/etc/avahi/services$ cat nfs.service <?xml version="1.0" standalone='no'?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">%h</name> <service> <type>_nfs._tcp</type> <port>2049</port> <txt-record>path=/Volumes/StoragePool</txt-record> </service> <service> <type>_device-info._tcp</type> <port>0</port> <txt-record>model=Xserve</txt-record> </service> </service-group> Server: Ubuntu 12.04.01 x64 Clients: OSX 10.6.8 , 10.7.5, 10.8.2 The goal is to advertise that NFS share, then assign a really old Model code of Mac like a Powermac and switch out the icon for a more "LinuxServer-y" one. Plus allow users to connect to NFS in a manner they are familiar with like our other Xserve servers. I think Avahi is working in general as if I do: nfs://FILESERVER.local/Volumes/StoragePool it will connect fine. Any ideas?

  Read the article

• Handheld Linux device can't see one wireless network

  - by Nathan

  I'm using a Nokia N810 running OS 2008 (version 5.2008.43-7; should be the latest). It can see networks up and down the street in my neighborhood and can connect to mine using WEP. I can also connect to free networks at restaurants and the like. When I bring it into work, it can't see a wireless network ("No connections available"). When I use netstumbler on my laptop I can see a list of several essids showing green connectivity for the network. I know that the network has its essid broadcast, and I know that it's unsecured. When I run iwlist wlan0 scan, I see several APs with no essid, but I don't see anything with an essid set. I have verified using iwlist that my hardware supports the correct channels and speeds. I know this isn't a Nokia/mobile forum, but it's running what's basically a Debian kernel. Any suggestions on what to do in this case? I'm really frustrated by this. Thanks, Nathan

  Read the article

• OSX Server 10.5 - Cannot log into Workgroup Manager - diradmin password is correct

  - by Mister IT Guru

  I've got a setup where I am trying to rescue a broken AD. We can no longer authenticate on the Workgroup manager, with passwords being rejected all the time - even though it is correct. I can connect using the workgroup manager on another server and I get the user list as expected, but when I click the padlock to make changes, I get the following screen: The problem is, I know the password is correct, I just used it to connect to the server in the first place. I can log into the server using the local admin, and services such as AFP, VPN and SMB continue to serve users. I have about 300 or so users on this server, and I would very much like to avoid having a rebuild. As there is much configuration that has been done without my knowledge (it's a client machine), I'd like to attempt to fix it, and then create another server and migration OD off this broken machine, then decommission it "gently". Ultimately this would mean no disruption of services. What I'd like it some tips as to how to fix the problem with authenticating to make changes in the work group manager, and maintenance on open directory in general. Thanks

  Read the article

• Possible DNS issue?

  - by durilai

  I am having an issue, which I think stems from DNS. I have 2 servers. Server 1 is AD server with DNS, which was automatically configured when installing AD. The second server is a web server that is part of the domain, but it is not AD nor any other role. I can remote desktop in from server 1 using internal IP address, but when I attempt to connect from any other computer it fails, the computer can connect to server 1. I am able to ping both servers, as well as nslookup both using their FQDN. I am also able to telnet to port 3389. Any help is appreciated UPDATE I do not think it is DNS anymore, but not sure what it is. The remote desktop connects and I get to the login prompt, but when I start to enter credentials it disconnects. I then am unable to reconnect. If I wait for about 10 minutes it will allow me to repeat, but with the same results. UGH!!!

  Read the article

• SQL server queries are really slow only on first run

  - by JoelFan

  Somewhat strange problem... when I start my .NET app for the first time after rebooting my machine, the SQL Server queries are really slow... when I pause the debugger, I notice that it's hanging on getting the response from the query. This only happens when connecting to a remote SQL server (2008)... if I connect to one on my local machine, it's fine. Also, if I restart the app, it works fast, even off the remote SQL server, and subsequent runs are also fine. The only problem is when I connect to a remote SQL server for the first time after rebooting my machine. What's more, I have even noticed this same exact behavior with a 3rd party app (also .NET) that also connects to a remote SQL server. Another piece of info... this has only started hapenning since I upgraded my machine from XP to Win7 (64 bit). Also, other developers on my team who upgraded to Win7 are seeing the same behavior (both with the app we're developing and the 3rd party .NET app). (copied from http://stackoverflow.com/questions/2014814/sql-server-queries-are-really-slow-only-on-first-run )

  Read the article

• Filtered Router Interface

  - by jviotti

  I'm having some problems with a Scientific-Atlanta DPR2320R2. In specific with the WIFI. A few months ago I changed its password and username and now I can't remember. So I tried cracking it with Hydra but it drove things worse. Content of webadmin was rendered partial, and threw lot of errors. I then reseted the router. I found myself abled to browse the web with ethernet-connected pc. Wifi is configured by registering the device's MAC Address, and indeed the router has been reseted and register MAC address were lost. No device could connect to wifi. In fact, the device does not even recognize the network. I tried the pointing to 192.168.0.1 to restablish the MAC's. But I couldn't connect to the router access point. Tried listing up hosts: $ nmap -sP 192.168.0.0/24 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:18 ART Host 192.168.0.1 is up (0.0018s latency). Host 192.168.0.11 is up (0.00025s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 59.62 seconds Then checked 192.168.0.1 was really up by sending pings. It responded to all my pings. I quick-scanned the access point: $ nmap 192.168.0.1 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:08 ART Interesting ports on 192.168.0.1: Not shown: 999 closed ports PORT STATE SERVICE 80/tcp filtered http Nmap done: 1 IP address (1 host up) scanned in 6.73 seconds Look the state of the port 80: FILTERED. I'm pretty confused now. Any suggestion would be appreciated. Thanks in advance.

  Read the article

• MS SQL to MySQL using MySQL Migration Toolkit: permission issue

  - by Zeno

  I have a MS SQL imported into SQL Server 2008 from a .bak and I set it to Mixed mode. I have a SQL user (called "test") that can correctly access the database using SQL Server. I need to convert this to a MySQL database, so I got the MySQL Migration Toolkit. I pick "MS SQL Server" and then it asks for the hostname/username/password/database. I'm not 100% sure on these, but I used "localhost" (running on same computer), left the port as is (1433) and the username/password ("test") for the SQL Server. And I used the database name for the SQL Server database I'm looking to import. I clicked next, enter my MySQL database details and then attempt to run it and I get this error: Connecting to source database and retrieve schemata names. Initializing JDBC driver ... Driver class MS SQL JDBC Driver Opening connection ... Connection jdbc:jtds:sqlserver://localhost:1433/Orders;user=test;password=blah;charset=utf-8;domain= The list of schema names could not be retrieved (error: 0). ReverseEngineeringMssql.getSchemata :Network error IOException: Connection refused: connect Details: net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java:372) net.sourceforge.jtds.jdbc.ConnectionJDBC3.<init>(ConnectionJDBC3.java:50) net.sourceforge.jtds.jdbc.Driver.connect(Driver.java:178) java.sql.DriverManager.getConnection(Unknown Source) java.sql.DriverManager.getConnection(Unknown Source) com.mysql.grt.modules.ReverseEngineeringGeneric.establishConnection(ReverseEngineeringGeneric.java:141) com.mysql.grt.modules.ReverseEngineeringMssql.getSchemata(ReverseEngineeringMssql.java:99) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) java.lang.reflect.Method.invoke(Unknown Source) com.mysql.grt.Grt.callModuleFunction(Unknown Source)

  Read the article

• Network config for KVM on physical machine with single NIC and single public IP

  - by neo0

  I have a physical machine running CentOS 6.4 and I will rent a place to run it in a data center. I want to install KVM on that machine to run some virtual machines. The problem is my physical machine have only one NIC and the data center give me a public IP for that interface. So how should I configure network on the physical machine to make it assign for each vm a private IP that can connect to Internet. If I create a br0 bridged with eth0 interface and create a vm with option --bridge=br0 then KVM could not assign an IP for the vm so setup can not be done. Should I use NAT mode? Does KVM have any host-only network like Virtualbox? But the vm still has to connect to outside? Thank you! Update I install the guest network using NAT (--network network:default) and then I only have to port-forwarding from the host. But if I config br0 bridged with physical eth0 then the guest can not get an IP from boot. So I removed the br0 and it worked.

  Read the article

• Why is the link between my switch and my router always negotiating half-duplex mode?

  - by Massimo

  I have a Cisco 2950 switch which has one of its ports connected to an Internet router provided by my ISP; I have no access to the router configuration, but I manage the switch. If I leave all switch ports with their default setup (auto-negotiation of speed and duplex mode), this link always connects at 100 MBit/s, but in half-duplex mode. I've tried replacing the cable, and also moving the link to another switch port: the result is always the same. A different device connected to the same port (or to any switch port, really) shows no problem at all. It could be guesed that someone configured the router to only connect in half-duplex mode... BUT, here's the catch: if I manually force the switch port to full-duplex mode (duplex full in the interface configuration), the link goes up, stays up and is completely stable. So: The connection is not forced to half-duplex mode by the router, otherwise it would not connect at all if I force the switch end to full-duplex. There is no actual link problem, otherwise the full-duplex connection would not go up or would at least show some errors. But if I leave the port free to auto-negotiate, it always connects in half-duplex mode. Why?

  Read the article

• Intermittent CNAME forwarding

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. At all times, I can connect to my website through the no-ip domain without issue. For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of today, however, the GoDaddy domain only works for about 10 minutes at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have attempted to run tests using a couple of online DNS check websites, but have not gotten any errors at any time. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. I would like advice on how I could debug/resolve this issue. Since the problem appeared without me changing anything on my end, I hope it will resolve itself, but knowing the cause in case it happens again would be preferable. EDIT: I changed the configuration in GoDaddy to create an A (Host) that points at my current IP. This works fine, so I can access the site through the GoDaddy domain without the preceding www. I am currently waiting for a new CNAME record to propagate that points the www subdomain at the main host, rather than my no-ip domain.

  Read the article

• Esx servers in a DMZ

  - by James

  I have two ESX 3.5 servers in a DMZ. I can access these servers on any port from my lan via a VPN. Servers in the DMZ are unable to initiate connections back to the lan, for obvious reasons. I have a vCenter server on my lan and can initially connect to the esx servers fine. However the esx servers then try to send a hearth beat back to the vCenter server on udp/902 obviously this will not get back to the vCenter server, which then marks the ESX servers as not responding and disconnects. There are two broad solutions I can think of; 1) Try to tell vCenter to ignore not getting heart beats. The best I can do here is delay the disconnect by 3 mins. 2) Try some clever network solution. However again I am at loss. Note: The vCenter server is on a lan, and cannot be given a public IP, so firewall rules back will not work. And also I cannot setup a VPN from the DMZ to the lan. **I am adding the following, explanation that I added to the comments Ok maybe this is the bit that I not explaining well. The DMZ is on a remote site, an entirely independent network (network 1). The vCenter server is on our office lan (network 2). Network 2 can connect to any machine on any port on network 1. But network 1 is not allowed to initiate a connection to network 2. Any traffic destined to network 2 from network 1 gets dropped by the firewall as it is traffic to a non-routable address. The only solution I can think of is setting up a VPN from network 1 to network 2, but this is not acceptable So any clever folk out there any ideas? J

  Read the article

• Weird connectivity issue wtih USB Wifi stick.

  - by Carlos Nunez

  Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

  Read the article

• Having trouble setting up my router

  - by indyK1ng

  I just moved into my apartment and the Internet connection is working. It's Comcast in case that matters. Anyway, I'm having trouble setting up my wireless router (Netgear WNR2000) to work with it. Are there any settings that I could be missing? I currently have it set up to use a static IP address and I found the DNS servers I'm supposed to use and the Internet light is green, but I can't get out to the Internet. When I am trying, I'm connecting to an Ethernet port on the back of my router. Is there a setting I'm missing or a setting that I have set wrong? I used the automatic set up wizard to learn that it's a static IP address. Any help would be appreciated. I am currently only able to use my Linux machine, so please make any help in Linux commands. Yes, I can connect to the Internet if I connect to the modem directly and I've been using the web interface when I'm connected to the router, so I suppose I can ping the router. My router detected the connection as using a static IP address, so I connected to the modem directly and figured out what my IP address, gateway, and mask were as well as DNS servers.

  Read the article

• ssh key questions

  - by Tim

  I have some questions regarding generating keys for ssh access: (1) Supposed there are two computers running ssh server service and I have generated a pair of key files on computer A and copy the public file to computer B. Is it true that this is only a one-way key: We only gave computer A permission to access computer B, not gave computer B permission to access computer A? If I now want to ssh from computer B to computer A, must I generat another pair of key files on computer B and copy the public file to computer A? (2) If I would like to connect a single local computer to several remote servers, is it to generate a common pair of key files only once on the local and copy the same public file to the remote servers, or to generate different pair of key files on the local for different remote servers? (3) If I would like to connect several local computers to a single remote server, when copying the public files from different local computers to the remote server, is it to combine them together into a single authorized_keys file or store them in different authorized_keys files? (4) If there are several servers shared the same file system by, for example, NFS, how to generate keys and arrange the key files for accessing from one server to the other? Also how to still generate keys and arrange the key files for a local computer to access anyone of the servers? All the machines above are Linux.Please provide examples and commands in your reply so that I can better understand how to solve the problems. Thanks and regards!

  Read the article

• Creating a ssh tunnel to transfer files?

  - by Vincent

  For me, networks are a very "opaque" thing, and even with reading a lot of tutorial about SSH, I do not understand how to create a basic tunnel to transfer my files. The configuration is the following : My Computer --[Internet]--> Bridge Machine --[Local Network]--> Final Machine Currently I do the following : 1) Connect to the Bridge Machine with : ssh -X [email protected] 2) Connect to the Final Machine with : ssh -X username@finalmachine 3) I copy the address of files I need (for example .../mydirectory) 4) Then I deconnect from the finalmachine with : exit 5) I copy the files to the bridge : scp -r username@finalmachine:/.../mydirectory . 6) I deconnect from the bridge with : exit 7) I copy the files to my machine : scp -r [email protected]:/.../mydirectory . Which is quite complicated. My question is basic : how to simplify this using a SSH tunnel ? (and please explain me the signification of each command line you write, to understand what each line really do and to avoid to use it like a magical thing. Furthermore if some ports number are used, explain me if I can pick a completely random number or if I have to choose a specific one.)

  Read the article

• BGP Multihomed/Multi-location best practice

  - by Tom O'Connor

  We're in the process of designing a new iteration of our network where we improve resilliency by adding a second datacentre. We'll be adding a second datacentre, with an identical configuration of servers as our primary location. To achieve network connectivity, we're looking into a couple of possible methods. See earlier questions http://serverfault.com/questions/86736/best-way-to-improve-resilience and http://serverfault.com/questions/101582/dns-round-robin-failover-and-load-balancing I'm pretty convinced that BGP is the right way to go about this, and this question is not about RRDNS. 1) If we have 2 locations, do we announce the same IP address block from both locations? 2) If we did this, but had a management ssh interface on x.x.x.50 from datacentre A, but it was on x.x.x.150 in datacentre B. What is the best practice mechanism for achieving this? Because if I were nearest to A, then all my traffic would go to x.50, but if i attempted to connect to x.150, I'd not be able to connect, because this address wouldn't be valid at A, but only at B. Is the best solution to announce 2 different netblocks, one at each location, facilitating the need for RRDNS, or to announce a single block, and run some form of VPN between the two sites for managment traffic?

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >