Search Results

Search found 10489 results on 420 pages for 'usb keyboard'.

Page 230/420 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

  - by carolien

  I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

  Read the article

• Cannot Boot, How to recover

  - by Kendor

  Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

  Read the article

• How should I structure moving from overworld to menu system / combat?

  - by persepolis

  I'm making a text-based "Arena" game where the player is the owner of 5 creatures that battle other teams for loot, experience and glory. The game is very simple, using Python and a curses emulator. I have a static ASCII map of an "overworld" of sorts. My character, represented by a glyph, can move about this static map. There are locations all over the map that the character can visit, that break down into two types: 1) Towns, which are a series of menus that will allow the player to buy equipment for his team, hire new recruits or do other things. 2) Arenas, where the player's team will have a "battle" interface with actions he can perform, messages about the fight, etc. Maybe later, an ASCII representation of the fight but for now, just screens of information with action prompts. My main problem is what kind of design or structure I should use to implement this? Right now, the game goes through a master loop which waits for keyboard input and then moves the player about the screen. My current thinking is this: 1) Upon keyboard input, the Player coordinates are checked against a list of Location objects and if the Player coords match the Location coords then... 2) ??? I'm not sure if I should then call a seperate function to initiate a "menu" or "combat" mode. Or should I create some kind of new GameMode object that contains a method itself for drawing the screen, printing the necessary info? How do I pass my player's team data into this object? My main concern is passing around the program flow into all these objects. Should I be calling straight functions for different parts of my game, and objects to represent "things" within my game? I was reading about the MVC pattern and how this kind of problem might benefit - decouple the GUI from the game logic and user input but I have no idea how this applies to my game.

  Read the article

• Build vs Rebuild

  - by prash

  Build means compile and link only the source files that have changed since the last build, while Rebuild means compile and link all source files regardless of whether they changed or not. Build is the normal thing to do and is faster. Sometimes the versions of project target components can get out of sync and rebuild is necessary to make the build successful. In practice, you never need to Clean. Build or Rebuild Solution builds or rebuilds all projects in the your solution, while Build or Rebuild <project name> builds or rebuilds the StartUp project. To set the StartUp project, right click on the desired project name in the Solution Explorer tab and select Set as StartUp project. The project name now appears in bold. Compile just compiles the source file currently being edited. Useful to quickly check for errors when the rest of your source files are in an incomplete state that would prevent a successful build of the entire project. Ctrl-F7 is the shortcut key for Compile. All source files that have changed are saved when you request a build/rebuild, so you don't have to save them first. When you run your executable (F5 or Ctrl-F5), Visual Studio saves all your changed source files and builds anything that changed, so you don't need to explicitly do those steps every time. This allows for quick "trial and error" debugging. Incidentally, if you like those little Visual Studio keyboard shortcuts, you can download posters of the C# and the VB.Net ones, respectively (I am personally a big fan of using keyboard shortcuts :) ).   Visual Studio 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=92ced922-d505-457a-8c9c-84036160639f   Visual Studio 2005 C#: http://www.microsoft.com/downloads/details.aspx?FamilyID=c15d210d-a926-46a8-a586-31f8a2e576fe&DisplayLang=en VB.NET: http://www.microsoft.com/downloads/details.aspx?FamilyID=6bb41456-9378-4746-b502-b4c5f7182203&DisplayLang=en

  Read the article

• Issue with running apt-get clean && apt-get autoclean

  - by nishanche

  root@T60ubuntuSVR:~# apt-get clean && apt-get autoclean Reading package lists... Done Building dependency tree Reading state information... Done root@T60ubuntuSVR:~# deborphan | xargs aptitude --purge remove The program 'deborphan' is currently not installed. You can install it by typing: apt-get install deborphan The following packages will be REMOVED: amarok-help-en{pu} dnsmasq-base{pu} kvpnc-data{pu} libnetfilter-conntrack3{pu} libutouch-evemu1{pu} libutouch-frame1{pu} libutouch-geis1{pu} libutouch-grail1{pu} linux-headers-3.2.0-24{pu} linux-headers-3.2.0-24-generic-pae{pu} linux-headers-3.2.0-25{pu} linux-headers-3.2.0-25-generic-pae{pu} linux-headers-3.2.0-26{pu} linux-headers-3.2.0-26-generic-pae{pu} linux-headers-3.2.0-27{pu} linux-headers-3.2.0-27-generic-pae{pu} linux-headers-3.2.0-29{pu} linux-headers-3.2.0-29-generic-pae{pu} linux-headers-3.2.0-31{pu} linux-headers-3.2.0-31-generic-pae{pu} linux-headers-3.2.0-32{pu} linux-headers-3.2.0-32-generic-pae{pu} linux-headers-3.2.0-33{pu} linux-headers-3.2.0-33-generic-pae{pu} modemmanager{pu} usb-modeswitch{pu} usb-modeswitch-data{pu} The following partially installed packages will be configured: linux-generic-pae linux-image-generic-pae{b} 0 packages upgraded, 0 newly installed, 27 to remove and 50 not upgraded. Need to get 0 B of archives. After unpacking 554 MB will be freed. The following packages have unmet dependencies: linux-image-generic-pae : Depends: linux-image-3.2.0-34-generic-pae but it is not going to be installed. The following actions will resolve these dependencies: Remove the following packages: 1) linux-generic-pae 2) linux-image-generic-pae Please tell me how to fix it.

  Read the article

• Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

  - by Sulliwane

  I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

  Read the article

• System in low graphics, deleted linux, grub rescue, can't access windows

  - by First timer

  So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

  Read the article

• Grub2 won't detect Ubuntu 11.10 OS after reinstalling Win XP hal.dll.

  - by yoopian

  Hi I'm an Ubuntu newbie here. I've installed ubuntu 11.10 to dual boot on a single HDD. I did a manual partition and basically forgot all the on what sda my /boot partition is. My installation worked out just fine and I tried to install updates with it. After a while I when I wanted to boot to windows it showed that I was missing a "hal.dll" file. I've fixed this problem using the windows resource CD but then after booting up my PC it went straight to Windows XP. I've tried to manually reinstall Grub2 using a Live CD/USB and it worked but I think I have installed in on a different "sda#" (sda5 to be exact) because even though Grub2 loads when I boot my PC, only windows XP shows up as my OS and Ubuntu 11.10 is missing. Now, I've tried installing boot-repair to solve my problems using Live CD/USB. Boot-repair tells me that boot configuration was successful but then a basic grub interface shows up (the black one with a command line grub showing up. Now I can't even boot to Windows XP. Any help would be really appreciated. BTW here's the notes from boot repair that I was asked to save: http://paste.ubuntu.com/890228/ As you can see there are boot files on sda5 and sda7. I think that's the core problem that I have right now. Thanks in advance!

  Read the article

• My Obligatory IPad Post

  - by mark.wilcox

  I've had my IPad for about a week now. So I thought I'd write some thoughts down based on my initial experiences. Here are my initial take-aways: 1 - Netflix OnDemand - I'm a movie junkie. I'm now more apt to just start a movie as background sound for my workday (I telecommute - so except for the occasional bark from my dog, it's awfully quiet here if I don't have something going). 2 - The Email Client is really nice and I'm as fast or faster typing when I have the wireless keyboard engaged. Even with onscreen keyboard - I'm already close to 75% of desktop speed 3 - The battery life is incredible - I think this is the first case where a mobile device actually under-promised on battery 4 - It totally has killed the notion of using a normal PC for my wife and mother-in-law - neither of which had wanted an iPhone/iPod Touch or really any Apple device until they got to play with my iPad. The concept of - instant on, easy to hold and touch-based navigation has them hooked. Heck, it has me hooked. My ultimate goal is to be able to have it at least replace the need to take my netbook with me on the road. I haven't had a chance to complete my testing on that front yet - between work, my wife traveling (for a change) and now my wife home sick - I haven't had time to just play with it. But so far my only regret - that I haven't already bought two more for everyone else in my family who wants to use mine. Posted via email from Virtual Identity Dialogue

  Read the article

• WIN7 and Ubuntu lost after Installing ubuntu 12.04 and win7 dual system ,I have no OS on my laptop now

  - by abos

  Here is the procedure: In the morning I installed ubuntu using a USB directly without config any thing to my win7 system. After install complete, ubuntu installation software tell me to reboot.And everything is just find. While rebooting, there is NO UBUNTU system for me to select,and my laptop go straight to log in using WIN7. NO ubuntu shows on WIN7's configuration(Default System). Log in ubuntu using usb(try ubuntu without installation), I can find ubuntu's filesystem was already there. Formatting the disk on WIN7's disk management, rearranging them to other disk.Still having no trouble with WIN7. In the afternoon try a few times of installation and uninstallation of ubuntu. still shows no sign of selecting ubuntu system. In the evening another trial while installing ubuntu with the third option of: installing ubuntu alongside with INW7, erase win7 and install ubuntu. somethingelse --- my check failed with configuartion for what comes out with the 'something else' option,reboot. And I have no system now with some cmd tips say: Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key. Files those on win7's orginal file system and Ubuntu filesystem can still be found when I 'try ubuntu without installation'. 5.But I just got no OS when I reboot my laptop normally.

  Read the article

• Ubunto 12.10 Boots to purple screen

  - by Ric

  I know this question has been tackled in a couple different threads but I've tried what I could from those and have not resolved the issue. I have just a basic understanding of this system so feel free to talk down to me or explain this like you would to a 5 year old. Let's start from the beginning. My son has a computer built by an IT friend of mine (we moved so he can't help any more). It had Windows XP running on it and it just stopped working correctly. This same friend had built a laptop for me with Ubuntu which I liked so I thought I'd put a new OS on my sons computer and it may work better. I downloaded Ubuntu 12.10 onto a USB drive and loaded it onto his computer. I followed all the prompts, it installed, I restarted the computer, it gives me the option of which OS to pick. I pick Ubuntu and it seemingly loads. The desktop comes up with just the basic pinkish Ubuntu background but that is it. There are no icons. I can't right click anywhere to create a file. Left clicking the mouse does not create a square when moved. Alt + F2 doesn't do anything. I can open a terminal but any of the commands I have seen in previous threads do not correct any issues. What else can I do, or what resources are available to fix this problem? I don't know if there are additional files on the USB drive that I need to access or what. Also, one of the problems we were having with my sons computer is that windows would only load to a blank screen. It runs accordingly in safemode and my install of Ubuntu was through safemode of Windows XP.

  Read the article

• Unity elements sometimes appear while full screen in Virtualbox - how to stop it?

  - by frumbert

  Launcher is great, and it helps me finds stuff. I have the latest release of 12. But when I'm full screen in VirtualBox running another operating system and I hit some key combination I haven't yet figured out, Unity suddenly grabs keyboard focus. It might be alt-tab, it might be left-control x. I have physically pulled both the windows key and FN key off my laptop because they get in the way, so it's probably not the windows key. You don't know the focus has been stolen because the full screen app (VirtualBox) is still full screen and the Unity element is in the background. But you're busy typing into a Unity box, not your foreground application. This is particularly annoying. In my screenshot (taken from a camera, because the built in screen capture program can't capture a screenshot containing the launcher...) the windows VM is the foreground application, but the "Run Command" entry box has come up and is capturing the keyboard: I would like a foreground full screen app to stay that way. Is there a way that I can keep Unity but only have it activate its elements (e.g. pop out with its search box) if I physically click a button, not type some random key combination that foreground applications can get confused about? Otherwise I can do without the launcher or other elements, because doing my actual work is more involved than just launching programs.

  Read the article

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• VirtualBox 4.0.10 is now available for download

  - by user12611829

  VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• Upgrading to 12.10 on an external hard drive

  - by Tom Childers

  I did some googling on this and didn't find anything specific for my situation. I currently have 12.04 installed on an external USB hard drive. It's working great. I want to upgrade it to 12.10. My bandwidth is very limited so I have a friend who will download 12.10 for me and put it on a flash stik. Then I can upgrade without having to do the download myself. Which particular version of the 12.10 download file(s) should I get? Are there alternate 12.10 downloads that have all the packages? How do I set it up so when I upgrade 12.04 I can specify that it look in some local repository for the 12.10 files? Can I just dump the 12.10 files in some local directory? Or do I have do go thru some complex commands to create a local repository? I'm pretty new to Linux so a long process of complex terminal commands will probably be a show stopper for me. Remember that my 12.04 install resides on an external hard drive. And I have a laptop with multiple USB ports. Thanks! Advait

  Read the article

• Interesting fault attempting to install Ubuntu 12.0.4.3 OR 13.10 on MSI GS70 2OD-001US

  - by cjaredrun

  Attempting to install Ubuntu on an MSI GS70 2OD-001US notebook pre-installed with Windows 8. For the record this is what I have attempted: All cases were attempted with Ubuntu 12.0.4.3 AND 13.10 images via USB drives Case 1 - Attempt no changes and simply boot from USB Result: It seems to want to work initially. The Ubuntu logo pops up and the dots start moving. After a few seconds the dots freeze and this screen is shown: http://i.imgur.com/C7pyMRk.jpg Case 2 - Start playing with BIOS - In Windows turning off fast boot - In BIOS turning off Secure boot - In BIOS turning off UEFI and selecting LEGACY Result: Brought to a black screen with a - blinking at me. Case 3 - Alternating BIOS settings - In Windows turning off fast boot - In BIOS turning off Secure boot - in BIOS turning off UEFI and selecting UEFI with CSM Result: Brought to a black screen no other indication of change. It's pretty frustrating to feel locked out of a laptop that I have paid good money for, I'm sure I am not alone in that case. It does however appear that there has been some success, so I am hopeful that someone might be able to help me. FYI: Dual booting is not necessary for me, if that helps at all... I'm not sure if this is a reasonable option, but if I completely wipe clean the hdds, no particle of Windows at all, would this still be a problem? Also would opening up the laptop and replacing the HDDS with brand new ones be a solution as well? Thanks for any input or suggestions.

  Read the article

• Unable to start Ubuntu 12.04. The system is running in low-graphics

  - by kaleidoscpicsoul

  I am a newbie to Ubuntu. I installed Ubuntu 12.04 using a USB Stick and it was running all fine for a few weeks and this error popped up. According to one of my friend, the best way was to re-install Ubuntu. Being from a non unix background i thought the same too and after the second install it happened again, but only this time was much quicker, in 3 days. I don't want to re-install Ubuntu every time this happens. I am a complete newbie to Linux which means that i am really bad at using terminal. I know there are other people who fixed this issue using this very same forum, but unfortunately the answers provided are too complex for me to understand. Please let me know how to do this. Things I want to let you know: I would need help step by step if that is alright with you. After i get the error i get the options and i click exit to console login I get the following message in a black screen (which i think is a command line sort of thing): * Stopping save kernel messages [OK] apache2: Could not reliably determine the server's fully qualified domain name,using 127.0.1.1 for ServerName [OK] * Starting web server apache2 and a blinking cursor. So basically it looks like a dead end for my non unixy eye. And one final thing is before this issue had happened i had tried configuring Python to Apache2. For that i had uninstalled and installed LAMP server several time and edited the configuration files too. I don't know if this really is a concern, but I don't know.. I have a USB with Ubuntu 12.04 in it so i can install it anytime. (But i want to know what the issue is rather than running away) . I migrated to Ubuntu from Windows and i have no plans to go back. I think that's from my side. Please let me know if there are any questions.

  Read the article

• Focusing and Selecting the Text in ASP.NET TextBox Controls

  When a browser displays the HTML sent from a web server it parses the received markup into a Document Object Model, or DOM, which models the markup as a hierarchical structure. Each element in the markup - the <form> element, <div> elements, <p> elements, <input> elements, and so on - are represented as a node in the DOM and can be programmatically accessed from client-side script. What's more, the nodes that make up the DOM have functions that can be called to perform certain behaviors; what functions are available depend on what type of element the node represents. One function common to most all node types is focus, which gives keyboard focus to the corresponding element. The focus function is commonly used in data entry forms, search pages, and login screens to put the user's keyboard cursor in a particular textbox when the web page loads so that the user can start typing in his search query or username without having to first click the textbox with his mouse. Another useful function is select, which is available for <input> and <textarea> elements and selects the contents of the textbox. This article shows how to call an HTML element's focus and select functions. We'll look at calling these functions directly from client-side script as well as how to call these functions from server-side code. Read on to learn more! Read More >

  Read the article

• Ubuntu 12.10 wont boot

  - by John Mark High

  im new to using Ubuntu and just bought a HP Pavilion g6-2240sa with windows 8 pre installed. I made a bootable USB with Ubuntu on it and installed alsongside windows, for 2 days it worked fine, I got into Ubuntu by doing an advanced restart from windows 8 and then booting Ubuntu from the partition it made. When i did the advanced restart today there was only 1 HDD i could select ( there were 3 before windows, a restore partition that was already there when i got the computer and Ubuntu) so i booted from the USB again and re-installed Ubuntu. then did an advanced restart and the 3 partitions where there again, i booted from Ubuntu and now heres my problem. I get the Ubuntu background when its loading then its just a black screen with some writing, its not on long enough to read, then just a black screen with a white _ and the top left corner that does nothing, i have to restat the computer and it auto boots into windows 8. im a little confused as the first time i installed Ubuntu it worked fine until the partition dissaperd), the second time i installed i did everything the same except it found the old Ubuntu so i reinstalled it and now is donst work.

  Read the article

• Launcher sometimes appears while full screen in VM (virtaulbox) - how to stop it?

  - by frumbert

  Launcher is great, and it helps me finds stuff. I have the latest release of 12. But when I'm full screen in VirtualBox running another operating system and I hit some key combination I haven't yet figured out, Laucher suddenly grabs keyboard focus. It might be alt-tab, it might be left-control x. I have physically pulled both the windows key and FN key off my laptop because they get in the way, so it's probably not the windows key. You don't know the focus has been stolen because the full screen app (VirtualBox) is still full screen and launcher is in the background. But you're busy typing into a laucher search box, not your foreground application. This is particularly annoying. In my screenshot (taken from a camera, because the built in screen capture program can't capture a screenshot containing the launcher...) the windows VM is the foreground application, but the launcher has come up and is capturing the keyboard: http://imgur.com/SrMRr I would like a foreground full screen app to stay that way. Is there a way that I can keep the launcher but only have it activate (e.g. pop out with its search box) if I physically click the button, not type some random key combination that foreground applications can get confused about? Otherwise I can do without the launcher, because doing my actual work is more involved than just launching programs.

  Read the article

• What is the *right* way to use gnome-shell integrated chat?

  - by stevejb

  Please bear with me as I am still figuring out how to use gnome-shell. My question concerns how to use the integrated chat correctly. I have the following questions: 1) When people chat with me, it pops up as a notification on the hidden bar at the bottom of the screen, and then that chat stays there so I can access it later. How do I initiate a chat in this manner, without opening an empathy window? What I have been doing is Hitting super key Typing in the person's name, which brings up contacts Initiate the chat using empathy Immediately close the chat window When the person responds, it comes through as a notification. I then proceed to interact with the chat this way. 2) What is the keyboard shortcut for bringing up the notifications bar? Ideally, I would like to have the following experience Use some keyboard shortcut to bring up notifications Begin typing the name of the notification that I wish to investigate, and have the matching work in a fuzzy manner, much like Ido mode's buffer switching matching in Emacs When then right name is matched, I hit enter and then bring up the chat with that person as that popup notification. Are these behaviours supported? If not, I would be happy to work on implementing them. I am an experienced programmer, but not familiar with gnome-shell. If someone would point me in the right direction in terms of if this behaviour is supported, or where in the gnome-shell framework would I add to to get this behaviour, I would really appreciate it. Thanks!

  Read the article

• lxterminal not working

  - by Dora

  My Lxterminal is not working. Here's some background: A few days ago I wanted to configure the keyboard layouts for my Lubuntu 11.10 for English and Romanian. You can find a deetailed description of what I did here: http://ubuntuforums.org/showthread.php?p=11793260 So, it worked for a few days. Today it stopped working again. So I started reading forums again. I tried to follow this forum: Switching keyboard layouts in Lubuntu 11.10 so I went up in the terminal, went into the .bashrc file and added this sudo tee -a /etc/xdg/lxsession/Lubuntu/autostart right after this: setxkbmap -layout "us,ro(winkeys)" -option "grp:ctrl_shift_toggle" Then pressed Ctrl+X and Enter. Almost at the same time I installed some system updates. A few minutes later I wanted to use the terminal again, and this is what happens: [sudo] password for dora: I type in the password but nothing happens. Also, whatever other command I try to type, it just gets returned. No errors messages, nothing. Please help. PS: Funnily, I just noticed that I am now able to type in Romanian again!

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >