Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 232/328 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• Camtasia on remote computer?

  - by daughtkom

  I have a need to use one laptop for a live presentation (with projector, etc.), but record that presentation on another laptop -- similar to what I can do with Camtasia, only with the recording happening on another laptop. Is this possible? What do I need to do this? Some VGA device that goes between the presenting machine and the projector? Some USB device? My ideal requirements: The machines must be "standard" laptops (so I can't just add a new card to a desktop, etc.). I prefer a hardware solution, but cannot involve studio type equipment. I'd prefer not to install Camtasia (or similar) on the presenting machine for two reasons: licensing issues performance issues (sometimes the presentations are machine intensive and I don't want the recording software to interfere with the presentation) I'd appreciate any tips. Thanks.

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• Audio input problem in Ubuntu 9.10

  - by Andrea Ambu

  My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

  Read the article

• Access RAID configuration in x3550M2

  - by Mike B

  I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

  Read the article

• Regular Expression .net flavor

  - by user1440109

  Dont ask how this works but currently it does ("^\|(.?)\|*$")....kinda. This removes all extra pipes...part one....I have searched all over no anwser yet. I am using VB2011 beta...asp web form......vb coding though! I want to capture special character pipe (|) which is used to seperate words...i.e. car|truck|van|cycle problem is users lead with, trail with, use multiple, and use spaces before and after...i.e. |||car||truck | van || cycle. another example: george bush|micheal jordon|bill gates|steve jobs <-- this would be correct but when I do remove space it takes correct space out. so I want to get rid of whitespace leading, trailing, any space before | and space after | and only allow one pipe (|)....in between alphanumeric of course.

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• xen hotplug can't add vif to eth0: operation not supported

  - by John Tate

  I am new to xen and I am trying to get a domU running but I am having problems with it. I think my network card might not support bridging which is bizarre. This is the error I get when trying to create the domU [root@hyrba ~]# xm create sardis.secusrvr.com.cfg Using config file "/etc/xen/sardis.secusrvr.com.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. All the xen kernel modules are loaded... xen_pciback 52948 0 xen_gntalloc 6807 0 xen_acpi_processor 5390 1 xen_netback 27155 0 [permanent] xen_blkback 21827 0 [permanent] xen_gntdev 10849 1 xen_evtchn 5215 1 xenfs 3326 1 xen_privcmd 4854 16 xenfs I get this error in /var/log/xen/xen-hotplug.log RTNETLINK answers: Operation not supported can't add vif2.0 to bridge eth0: Operation not supported can't add vif2.0-emu to bridge eth0: Operation not supported

  Read the article

• PC won't post after replacing mobo

  - by Dan

  I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

  Read the article

• Motherboard memory question

  - by JERiv

  I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

  Read the article

• Raw SQL sent to SQL Server from .NET on stored procedure call

  - by Jeff Meatball Yang

  Is there a way to get the raw text that is sent to SQL Server, as seen in SQL Profiler, from the ADO.NET call? using(SqlConnection conn = new SqlConnection(connString)) { SqlCommand cmd = conn.CreateCommand(); cmd.CommandType = CommandType.StoredProcedure; cmd.CommandText = "GetSomeData"; cmd.Parameters.Add("@id").Value = someId; cmd.Parameters.Add("@someOtherParam").Value = "hello"; conn.Open(); SqlDataReader dr = cmd.ExecuteReader(); // this sends up the call: exec GetSomeData @id=24, @someOtherParam='hello' // how can I capture that and write it to debug? Debug.Write("exec GetSomeData @id=24, @someOtherParam='hello'"); }

  Read the article

• Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

  - by Kris

  I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

  Read the article

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• Why does my laptop shut down, does it get too hot?

  - by Kevin P.

  When I play games, or use powerful-applications such as Autodesk Maya, my laptop just shuts down, ofcourse without any warning at all. This is what I've tried so far: Cleaned my fan, completely! Checked if I have enough RAM and good enough graphics card, and I do. (6 GB RAM, Nvidia GeForce GT540M with 2 GB VRAM) None of these options worked. Even tried to clean my fan twice! Now, I have some options I could also try, but I don't know if that have anything to do with it or not. I was thinking reinstalling my Windows 7, because maybe it has to do something wrong with the installation? My laptop is about a year old, and this problem just happend out of no where, short after I downgraded from Windows 8 Release Preview to my original Windows 7.

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

  - by Goober

  I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Self hosted WCF console output from service

  - by user989056

  quick one: Is it possible to capture the output stream of a WCF service that is hosted via ServiceHost ( self hosted service) ? I have methods within my WCF service that output useful debugging information, is it possible to send these to it's host's console output? Edit: It appears that I have made an obvious blunder - I was using Debug instead of Console. It is possible to output to the console by using the standard Console output commands in your WCF service class. I have marked the answer that I have found the most useful.

  Read the article

• Ruby: Read large data from stdout and stderr of an external process on Windows

  - by BinaryMuse

  Greetings, all, I need to run a potentially long-running process from Ruby on Windows and subsequently capture and parse the data from the external process's standard output and error. A large amount of data can be sent to each, but I am only necessarily interested in one line at a time (not capturing and storing the whole of the output). After a bit of research, I found that the Open3 class would take care of executing the process and giving me IO objects connected to the process's standard output and error (via popen3). Open3.popen3("external-program.bat") do |stdin, out, err, thread| # Step3.profit() ? end However, I'm not sure how to continually read from both streams without blocking the program. Since calling IO#readlines on out or err when a lot of data has been sent results in a memory allocation error, I'm trying to continuously check both streams for available input, but not having much luck with any of my implementations. Thanks in advance for any advice!

  Read the article

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• Django "Page not found" error page shows only one of two expected urls

  - by Frank V

  I'm working with Django, admittedly for the first time doing anything real. The URL config looks like the following: urlpatterns = patterns('my_site.core_prototype.views', (r'^newpost/$', 'newPost'), (r'^$', 'NewPostAndDisplayList'), # capture nothing... #more here... - perhaps the perma-links? ) This is in an app's url.py which is loaded from the project's url.py via: urlpatterns = patterns('', # only app for now. (r'^$', include('my_site.core_prototype.urls')), ) The problem is, when I receive a 404 attempting to utilize newpost, the error page only shows the ^$ -- it seems to ignore the newpost pattern... I'm sure the solution is probably stupid-simple but right now I'm missing it. Can someone help get me on the right track...

  Read the article

• What kind of SSL certificate do I need?

  - by Christoffer

  Hi, I want to install HTTPS on my server and I wonder what kind of certificate I will need and where I can buy it. The site is a web application that demands high security by it's users since they store sensitive business data. I am also integrating a third party payment gateway into the register process of the site and need a secure way to send credit card data one way. I do not intend to store this data in our own database. So, what do I need? And also, how do I install it on Ubuntu Server 9.10 / Apache2 ? Cheers! Christoffer

  Read the article

• Validating Column Data Stored as CSV Against Another Table

  - by Jakkwylde

  I wanted to see what some suggested approaches would be to validate a field that is stored as a CSV against a table containing appropriate values. Althought it would be desired, it is NOT an option to split the CSV list into another related table. In the example data below I would be trying to capture the code 99 for widget A. Below is an example data representation. Table: Widgets WidgetName WidgetCodeList A 1, 2, 3 B 1 C 2, 3 D 99 Table: WidgetCodes WidgetCode 1 2 3 An earlier approach was to query the CSV column as rows using various string manipulations and CONNECT_BY_LEVEL however the performance was not acceptible.

  Read the article

• Server 2008 R2 repair install

  - by Kyle

  Is it possible to do a repair install on a server 2008 R2 Enterprise machine like we used to be able to do on 2003? I need to reinstall on a remote server and don't have a driver cd in the drive just a copy of server. I am worried that when it comes back up I won't have any drivers for the NIC. I have a iDRAC but can't seem to send files over the DRAC to the machine. Sadly this server doesn't have an SD card in the DRAC with the files I need. I welcome any suggestions if the repair is not possible. Our IDC is in Chicago and they are buried under snow so I won't be able to get another admin on site until at least tomorrow.

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >