Search Results

Search found 18699 results on 748 pages for 'laptop mode'.

Page 240/748 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• How to send Bluetooth audio to non-Bluetooth speakers?

  - by wonsungi

  In short, I am looking for a Bluetooth-3.5 mini stereo converter. What is this type of device called, and what are some of the best models (is there a difference in audio quality/lag)? I wish to connect some speakers (Altec Lansing inMotion IM7), which does not support Bluetooth, to my laptop (Lenovo X301) wirelessly. Currently, I can connect my laptop's headphone jack to the AUX jack on my speakers via a mini stereo cable. How do I replace this cable with some type of Bluetooth setup? I am not sure what this Bluetooth device is called. I thought I found something, but it actually does the opposite of what I need (3.5 mini stereo-Bluetooth). (My OS is Vista Enterprise, if that matters)

  Read the article

• How to "restart/repair" an USB port?

  - by Click Ok

  My laptop have 2 usb ports, but one is broken, so I use an USB hub in the another good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detects the mouse and keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... So, I wonder if there is some method/software/etc to "restart/repair" the USB port without restart the PC. Thanks for all!

  Read the article

• Mini-jack problem with Sony Vaio (running XP)

  - by qftme

  I have a five year old Sony Vaio laptop (vgn-fw31m) that has had impact damage to the audio-output mini-jack for about the last year or so. In a recent discussion with my brother, we wondered whether it would be possible to write a program that would enable windows to use the microphone mini-jack input as the audio-output? As I currently use this laptop for work I am not keen to risk pulling it apart in order to replace the components comprising the audio-out. I therefore 'hope' that a programming solution exists. I would really appreciate any advice on this and eagerly await your response. Kind regards, qftme :)

  Read the article

• AHCI on Windows if BIOS does not have the option but all hardware does support it?

  - by Foo Bar

  Is it somehow possible to use AHCI on Windows if the BIOS does not have the option to enable it? This is a known problem especially on mid-old Laptops that have chipsets and drives that perfectly support SATA and AHCI, but only provide the legacy IDE mode in BIOS. Especially with SSD's this can often be a problem. I know that Linux has no problems to run everything in SATA and AHCI mode on these machines. So, is there any possibility to also make Windows "override" the BIOS? Some kind of alternative BIOS's, drivers, etc? Or some kind of Linux-based boot module that emulates an AHCI-capable BIOS to Windows while booting up?

  Read the article

• How to force 640*480@60Hz screen resolution on xubuntu 12.04

  - by c2h2

  It seems xubuntu won't be able to correctly set resolution at 640*480@60Hz at its Display settings. And I am unable to correctly my super small 6.4 inch Mitsubishi VGA panel via VGA cable. I have tried to hack both X11 conf /etc/X11/Xorg.conf and xfce4 conf, but all the document I can find is outdated. and conf files are changed into other location. Can someone give me a hand and I'll mark correct for other people to use? Thanks! EDIT: The board is an Intel Atom D2700, gpu is SGX545. I tried to use xrandr --output default --mode 640*480 It seems works fine, but refresh rate is 75Hz, but the screen only suports 60Hz So I used xrandr --output default --mode 640*480 --rate 60 but it give error: xrandr: Failed to get size of gamma for output default Can anyone pointing any directions?

  Read the article

• is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

  - by user239167

  I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

  Read the article

• Smart backup software

  - by gisek

  I use a laptop on daily basis. As I have a lot of important data there it would be nice to do backups of some directories every day. Can you recommend a specific application that would take care of it? Maybe there is an app that would instantly commit changes I make in a directory on my laptop to the backup folder? The important thing is that I have some big files (a few GB's) that have some minor changes very often. I'm talking about VirtualBox disk images. It would be nice if the software could handle it smartly. Also notice that I'd like to store it on an external usb HDD, which sometimes isn't plugged in.

  Read the article

• Reverse SCP over SSH connection

  - by pavpanchekha

  I pretty often need some file from some server when I'm on my laptop. But if I don't know where that file is, I have to ssh into the server, look around, exit, and then scp server:file .. If I'm working with my desktop and my server, both of which have static IPs, I can just SCP the file in reverse (scp desktop:~ file), but I can't do that for my laptop. Is there any nice way to SCP a file backwards over an SSH connection? So that the computer I connect to with SSH sends a file backwards to the client?

  Read the article

• How to connect 2 virtual hosts running on the same machine?

  - by Gabrielle

  I have 2 virtual hosts running on my Windows XP laptop. One is Ubuntu running inside vmware player. The other is MS virtual PC (so I can test with IE6 ). The Ubuntu virtual host is running my web application with apache. I can point my browser on my laptop at the Ubuntu IP and view my web app. I read this post http://stackoverflow.com/questions/197792/how-to-connect-to-host-machine-from-within-virtual-pc-image and was able to get my Virtual PC to ping my physical machine using the loopback adapter. But I'm stuck on getting my Virtual PC to see my web application running in the Ubuntu vmware player host. I appreciate any suggestions.

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• Windows 8 trackpad edge swipe zones

  - by askvictor

  I'm running Windows 8 on a Lenovo x220 laptop; and have just inadvertently discovered the edge-swipe feature or that brings up the charms or switches between desktop and RT. Only problem is that the landing zones are a little too wide for my liking - I'd like to keep this feature, but to narrow the zone where it can start. I'd rather not disable it completely as per: Modify or disable Windows 8 swipe gestures on touchpad / laptop The Synaptic driver (latest available) doesn't seem to provide for changing this (though it does for other zones). Any ideas?

  Read the article

• Windows 7 Permissions

  - by Scott

  I have an odd problem with a windows 7 laptop. It's a single user installation currently. This is a fresh install on an Asus laptop. I have a svn repo checked out on my second partition. I have a directory which I have added to svn:ignore list, because it is for tmp files. This specific directory shows as read-only. I need write access on this directory for my project to function properly. If I right click and modify the directory to be not be read only and run this recursively, it simply is immediately reverted back to a read-only directory. I have also modified apache's service to run as myself to no avail. I'm stumped... Any ideas?

  Read the article

• TrueCrypt with blank password

  - by TheSavo

  This might sound like an odd question, but please hear me out. I want to setup my laptop to use TrueCrypt, but without a password. My wife doesn't travel much with her notebook. There are occasions where we will have to travel and bring the notebook with us. This is when we would like the have the encryption. The time it takes to to change the unlock pass-phrase is considerably less than it takes to encrypt the drive. My thoughts are to leave the disk encrypted but with no password. Then when it's time to pack for a trip and bring the laptop, we would then change the pass-phrase and create a rescue disk.

  Read the article

• Using a CF card as an IDE HDD

  - by dartacus

  I have an old Sony laptop (Vaio TR1-MP) that I like. The HDD has died and since it's a hard-to-find 1.8" IDE hard drive I'm considering buying one of those little CF card adaptors and a 16gb CF card. The total cost of that is about £30 and replacement HDDs for this model are far pricier. Has anyone replaced their HDD with a CF card in this way, and, crucially, is the performance utterly horrible afterwards? ;-) I've seen a couple of threads which hint it's possible but the advice eventually given was just to buy a SSD, but I'm not even sure if its possible to get a 1.8" SSD with an IDE connector that'll fit my laptop. (I freely admit that the most sensible thing to do would be to bin it and just buy a cheap netbook which would be smaller, faster and lighter than the sony, but it does have a very nice widescreen display and dammit I just like it !) Thanks, G

  Read the article

• Are these symptoms of a video card is dying?

  - by K Cloud

  What I am getting from my PC: Scrambled text in the boot menu. The scrambled text dissapears and everthing goes normal after several restarts, or the computer has worked for some time. Display goes blank showing, windows kernel mode driver stopped responding. Sometimes the windows just hangs, I need to restart the pc for that. There used to be some scrambled colors in my windows, so I cleaned up my video carda and port and reinstalled the video card, things are something right. The pc runs normally for hours in safe mode, as diffault display driver works at that case. My PC specs: Core 2 Duo processor 2 GB RAM NVIDIA EN210 SILENT GPU Windows 8 Drivers details: NVIDIA drivers - v331.65, told to be fully compatible with Win8 Currently I am installing Windows 7 and will be putting the older version of driver v320 to test, yet I'm really confused weather my GPU is dying or still on go.

  Read the article

• Terminal Server Install -- Add/Remove Program Message on NonAdministrator Machines

  - by Brandon

  First time poster... My company uses terminal services for one of our remote offices. Data is kept on a different server. OS is Windows Server 2003. Last week, they needed to purchase a program and have it installed on terminal server, which was done. An administrator session was started, the TS was put into install mode and the program was installed. The TS was then put back into execute mode. The install did not require a reboot. Since then, when any user who does not have administrator privileges initiates a remote session and logs in they get a security message that says "Add / Remove programs has been restricted. Please contact your system administrator." The only option is to click OK, which everyone does and after that there are no issues. Anyone have any idea why this is happening and how to fix? Thanks!

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• Can't open Control Panel or IE

  - by Josh

  I have a XP computer where when ever I try to open Control Panel nothing happens, nothing flashes on the screen. Same thing with Internet Explorer. I've scanned the computer with Malwarebytes and Avast, Malwaresbytes found some Adware which it removed without problems. Avast found nothing. I looked at the running processes with Process Explorer, nothing malicious running. And looked at a Process Monitor output when I tried to run IE, nothing obviously wrong. The process just decides to exit. What can I try next? I would suspect corrupt IE install but Control Panel doesn't work either. UPDATE: Nether work in Safe Mode under the user account. (only 1 user on the computer) But in Safe Mode, under the built in Administrator account, they work. So what ever is broken, is only broken in the one account. Anything under the HKCU registry key that could break this?

  Read the article

• Why is my ftp connection timing out?

  - by NEPatriot

  This is the log info: Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,201,145,1,199,43) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing The strange thing is that I've set the transfer mode to active... I've called my hosting company support and they're able to connect to this server using my ftp credentials. I've also tried to connect on another machine on my network and have the same issue. Could it be the firewall? My ISP?

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• How to solve ATI Radeon 7670M/ Intel HD Switchable Graphics recurring BSOD error?

  - by Ashin Mandal

  I recently bought a VAIO E Series laptop with an ATI Radeon 7670M and Intel HD Switchable Graphics. Around about one month ago, my computer started shutting down with atikmpag.sys blue screen error and the frequency of the errors kept on increasing with time. I am really worried about my VGA Adapter and whether or not it's gone bad. It's a 3 month old laptop! I searched on Google about atikmpag.sys BSOD and most of them suggested that my driver probably needs to be updated. I searched the Sony website and also the ATI website, I did have the latest drivers installed. Yet, I uninstalled the driver and installed it back again. But blue screens just keep coming back again and again. It generally happens more frequently when I have a video running and have paused it to do something else. I hope it's a driver issue!

  Read the article

• Windows XP Blue-Screens And Reboots Instantly On Boot-Up

  - by ashes999

  My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

  Read the article

• How do I get the Windows 7 installer onto a USB drive?

  - by Rod

  I'm having trouble installing Windows 7 onto my old laptop. The problem appears to be the laptop's DVD-ROM no longer seems to work. Sucks. So, I'm trying to figure out how to get a bootable USB with my Windows 7 DVD info onto it. I found this link here on superuser.com: http://superuser.com/questions/66948/place-a-bootable-iso-on-a-usb-drive That looks good, except for the detail about making the USB bootable. It said that the OS you're making it bootable on must be the same as the machine you're going to be installing it on. I can't do that. The machine I would make it bootable from is a 64-bit version of Windows 7. The target machine is 32-bit. So, how's this going to work?

  Read the article

• Does OEM partition stores Windows 7 serial key ?

  - by Mahesha999

  Does OEM partition stores the serial key which is grabbed by the Win 7 setup done from the disk provided with laptop. I realized that when you install clean system from Windows 7 disk you get with laptop, it grabs the serial key or it doesn't ask one. So from where it gets that serial key. Is it the OEM partition or anything else? Or the recovery partition stores the key? What all the things these two partitions do store in them?

  Read the article

• Router used as ethernet bridge wont show up

  - by user1255271

  I have a Netgear router in my living room that has the wireless signal. It is connected to a Powerline plug that goes up to my bedroom. That is plugged into another router that is used as an ethernet hub. It's cables go into my PS3 and my server. The second router shows up as a hidden network on my laptop, and I can connect to it. But it is not listed as an attached device on my main router, and my laptop says that it connects straight to the main router, not the second one. How can I connect to this router? Aside from swapping the two? Thanks in advance.

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >