Search Results

Search found 15389 results on 616 pages for 'external js'.

Page 250/616 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Audio Static/Interference regardless of audio interface?

  - by Tom

  I currently am running a media center/server on a Lubuntu machine. The machine specs: Core 2 Duo Extreme EVGA SLI 680i MotherBoard 2 GB DDR2 Ram 3 Hard Drives no raid - WD Caviar Black, Green, and Samsung Spinpoint Galaxy GTX 220 1GB External USB Creative XI-FI Extreme Card 550W Power Supply This machine is hooked up through an optical cable to an ONKYO HTR340 Receiver through the XIFI card. Whenever I play any audio regardless if it is through XBMC, the default audio player, a flash video, etc, I get a horrible static sound that randomly gets louder. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 This static comes in randomly, sometimes going away for short periods, but eventually always comes back. So far I have tried everything I could think of: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Pretty much everything short of swapping the CPU. I haven't been able to narrow down the problem and it is getting frustrating. Is it possible that the CPU is faulty and might cause a problem such as this, or that the PC case is shorting out the motherboard? Any kind of suggestions will be appreciated.

  Read the article

• How to push changes from Test server to Live server?

  - by anonymous

  As a beginner, I finally noticed the issue with making changes to the live server I've been working on, now that I have a couple users on it, since I bring it down so often. I created an EC2 image of my live server and set up a separate instance on EC2, so now I have 2 EC2 instances, Stage and Production. I set up GitHub and push changes to stage and test my code there, and when it's all done and working, I push it to the production branch, and everything is good. And there is a slight issue here since I name my files config_stage.js and config_production.js and set up .gitignore on each server, and in my code, I would have it read the ENV flags and set up the appropriate configs, is this the correct approach? And my main question is: how do you keep track of non-code changes to the server? For example, I installed HAProxy, Stunnel, Redis, MongoDB and several other things onto the Stage server for testing and now that it's all working and good, how do I deploy them to production? Right now, I'm just keeping track of everything I installed and copying configuration files over, which is very tedious and I'm afraid I may have missed a step somewhere. Is there a better way to port these changes over from my test server to my live server?

  Read the article

• Route specific HTTP requests through pfSense OpenVPN

  - by DennisQ

  Hi, to start, I have very little knowledge on routes, iptables, etc. That said, here's what I'm trying to accomplish and where I think I'm stumped: Problem: We have an external website which we recently firewalled so it only accepts traffic from our office IP addresses. This works well at the office, but doesn't work for remote access through VPN as we don't route all traffic through OpenVPN. I would rather avoid forcing everyone to route all traffic through just to accommodate this one site. Environment: Main router box is running pfSense. Em0 is internal IP, Em1 is external. Internal net is 10.23.x and VPN is 10.0.8.0/24 I believe what I need to do is add a route to the VPN server config to send all traffic to that IP over the VPN tunnel. I think that part's working, but I don't get a response back, so I'm assuming that I need some NAT config on the VPN server to route the response back over the tunnel? What I've found so far is to try the following, but since this is a pfSense box on FreeBSD, I can't run iptables, etc. Make sure ip forwarding is enabled: echo 1 /proc/sys/net/ipv4/ip_forward Setup NAT back out: iptables -t nat -A POSTROUTING -s 10.0.8.0/24 -o em0 -j MASQUERADE Am I on the right path, and if so how do I accomplish this through pfSense UI or FreeBSD CLI? Thanks!

  Read the article

• Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

  - by NickToyota

  Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

  Read the article

• TeamCity EC2 Integration via ISA Server

  - by Tim Long

  I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

  Read the article

• Apache Caching and Expires configuration

  - by mcondiff

  I'm looking for a best possible caching/expires configuration for my specific situation. I realize that some sites have advocated turning etags off: Header unset ETag, FileETag None I know that I should use either Expires or Cache-Control. In additions, I know that I should use either Last-modified or ETAGs (Per ySlow docs). I inherited a clients server that uses the following in .htaccess: <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf|xml|txt|html|htm)$"> Header set Cache-Control "max-age=172800, public, must-revalidate" </FilesMatch> With this server I am not going to be able to rely on staff to rename images, css and js in web applications so I do not want to set the expires far in the future without knowing (with a good certainty) that "most/all" browsers will check to see if content has changed. What I do not want to happen is someone call me and say the website is broken because they replaced an image and it's not showing up. But I do want to take the most advantage I can with caching and expires while still maintaining that mostly all browsers will check with the server to see if components have changed. I have access to both the .htaccess and apache .conf file and it is a single server, the content is not deployed on multiple servers. What would be the best .htaccess or .conf configuration for me to achieve my goals for this clients server? Thanks for your help

  Read the article

• Microsoft Remote Desktop Services - Android

  - by Matt Rogers

  We have recently started testing Remote Desktop Services. We have deployed the environment using the latest server, Windows Server 2012 R2. We have deployed the Web Access Roles, RD Gateway, Connection Broker Virtualization Host and Session Host. We are running both, Virtual machine-based and Session-based deployments. All of these are working as expected internally and externally when using a Windows workstation as the RDS client, however, the Android client is unable to launch applications. Once you install the app from Google Play you are given a screen to add Remote Resources. After entering the appropriate URL, username and password we see the applications that have been published. Unfortunately, when we attempt to launch an app we get the following error: Connection Error Host not found. Please provide the fully-qualified name or the IP address of the host. We have already entered this information otherwise I don't believe we would be able to see the published applications. I think the error is related to the certificate and how it is being used to connect to the applications. Since this is in our lab environment we have not configured a valid external certificate on the servers and the trusted certificate that is installed on the android tablet points to our internal server / domain name. What I would like to know: Has anyone configured RDS Web Access on Server 2012 R2 and attempted to externally connect an Android or iOS device using the Microsoft supported Remote Desktop client. Are others experiencing the same problem we are? Were you able to resolve the issue? Was it related to the external cert / host name?

  Read the article

• How to setup DNS server behind a VPN

  - by Brian

  I want to host some websites behind a VPN and I need some help with the finer points of the configuration. Thus far I've settled on OpenVPN + Bind9 and I want to configure the domains like this: External DNS mail.example.com www.example.com vpn.example.com I want to be able to connect to the vpn using 'vpn.example.com'. Once connected I then want to be able to resolve anything which is '*.vpn.example.com' with the DNS server sitting behind the VPN. I know that OpenVPN can push DNS servers to clients when they connect. I am having trouble though with the DNS config, both internal and external. I've gone through a few tutorials etc. and tried to reason about it myself but I'm not getting anywhere. So my main question would be does the above configuration make sense? If so, any general pointers or examples would be greatly appreciated. Here's what I've tried so far based on this tutorial (I've redacted my domain with example.com). When I try the tests with dig at the end to check the resolution is working it fails. db.vpn.example.com $TTL 15m vpn.example.com. IN SOA ns.vpn.example.com. [email protected]. ( 2009010910 ;serial 900 ;refresh 900 ;retry 900 ;expire 900 ;minimum TTL ) vpn.example.com. IN NS ns.vpn.example.com. ns IN A 192.168.0.2 test IN A 192.168.0.2

  Read the article

• Changing externally visible IP on a multi-IP router?

  - by AlternateZ

  I work at a public library and I'm trying to configure OCLC's EzProxy software. I've run into a problem and I think it's related to our network config. I'm punching above my weight here a little so I need some help. I think I'm trying to configure a 1:1 NAT, but not sure how or if our hardware supports it. The EzProxy machine is on an internet line which supports multiple external IPs. Our router is a Billion BiGuard30. There's another server on this line, let's say its IP is x.x.x.9. The EzProxy machine is x.x.x.11 I've set up port forwarding from x.x.x.11 on the http ports to the EzProxy machine. Trying to browse to x.x.x.11 from an external PC works fine - we get to the EzProxy page we are serving. However, if we go to something like WhatIsMyIP from the EzProxy machine, it says that its IP is x.x.x.9. This causes problems with our user authentication software. How do we make the rest of the internet see that the machine is x.x.x.11? There doesnt seem to be any "outbound port forwarding" on the Billion router, nor is there any "1:1 NAT" options in its config webpage. The EzProxy machine is running Ubuntu 12.04, if that helps.

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• Atlassian Crucible very slow on large repository

  - by Mitch Lindgren

  Hi everyone, My company has been running a trial of Atlassian Crucible for some months now. For repositories where it's working properly, users have given very positive feedback about the tool. The problem I'm having is that we have several different projects, each with its own repository, and some of those repositories are very large. One repository in particular has a large number of branches and probably around 9,000 files per branch. Browsing that repository in Crucible is extremely slow. Crucible is running on a CentOS VM. The VM has 4GB of RAM, and I've set Crucible's maximum at 3GB, of which it is currently using 2GB. I've brought this up in a support ticket with Atlassian, and they suggested the following: In particular because you have a rather large SVN repository you will likely find that Fisheye will be creating a large index file on disk. To help improve performance a few things you can try are: Increasing the available memory available to Fisheye (see the document above). Migrating to an external database: confluence.atlassian.com/display/FISHEYE/Migrating+to+an+External+Database Excluding files and directories from your index that aren't needed: confluence.atlassian.com/display/FISHEYE/Allow+(Process) (Sorry for not hyperlinking; don't have the rep.) I've tried all of these things to an extent, but so far none have helped greatly. I was originally running Crucible on a Windows box with 2GB of RAM using the built in HSQL DB. Moving to MySQL on CentOS saw a performance increase for some repositories, and made Crucible much more stable, but did not seem to help much with our biggest repository. There are only so many files/branches I can exclude from indexing while maintaining the tool's usefulness. That being the case, does anyone have any tips on how to speed up Crucible on large repositories, without investing in insanely powerful hardware? Thanks! Edit: To clarify, since I didn't mention it explicitly above, I am using FishEye.

  Read the article

• Hosting a javascript api file for third party sites the way sharethis, uservoice, analytics do it.

  - by Dayson

  I'm preparing to launch a service soon which will provide third party websites a widget. The widget requires my javascript file in the website's code. Exactly the same way services like analytics, uservoice, sharethis, getclicky, etc provide you with a javascript snippet to add to your page. Therefore, my javascript file is going to be hotlinked by tons of websites which possibly receive a lot of requests too. I need advice/opinions on the following aspects: What's the right location for hosting this file? Should I use a sub-domain for it? I was thinking of something like http://api.myservice.com/js/foo.js . Remember, once websites start embedding this file, its location CANNOT change under any circumstances. Right now we can afford just one dedicated server. So I have minified my file, enabled gzip and plan to use some good cache control headers through apache. Also, in the near future when the requests pickup, I will use a http proxy like Varnish. Is this a good plan for the near future? Should I be considering a CDN in the future (since we can't afford it now)? If so how do I make sure we're prepared to migrate to it without breaking services. Pros/Cons of moving just this file to a CDN? Also, since its just one javascript file(50kb), any affordable CDN so we could consider it in the beginning itself? Any other word of advice I could use? Anything I shouldn't overlook at this stage which I would regret later? (both in terms of server + javascript ajax limitations) Thanks in advance.

  Read the article

• Slow transfer speed between two servers

  - by Linux Guy

  I have two servers both network cards speed is 10Gbps The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.1 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.1, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.0 port 38895 connected with 0.0.0.1 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service the connection will be ok , after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• Real-time local backup with versioning on Windows 7/8

  - by Borda

  I'm looking for a reliable backup solution on Windows, something with a feature set similar to Yadis. I've been using CrashPlan for 2 months, but their software lost more than 1TB of my data, that's why I'm looking for alternatives. Requirements: Real-time folder-to-folder backup: I don't need online features, I want to use this to duplicate my files between my local disks. Versioning support: Should be able to choose how many versions to keep of the files. Plain backup: I'd like to be able to open the backup without special software. No proprietary file format. External disk support: Shouldn't have any problem using external disks, at least on the source side. Backup every file, even locked/system files. (Yadis fails this one) Should start automatically, and have a comfortable GUI. Should use actively maintained and/or popular software. I don't want to use discontinued products. Optional requirements: Low RAM usage I'm not really comfortable with something that eats 1GB of my RAM. Compression support Preferably ZIP, but I'm not picky about this. Any ordinary everyday format is acceptable. Freeware or Open Source Preferred, but not necessary. I can do a one-time payment within reasonable bounds. (preferably under $100) I only need Windows support, but if it works on Linux, that's a plus. I've already searched and tried lots of software, most of them failed at the plain backup, the versioning or the locked file backup requirements.

  Read the article

• How to find cause of main file system going to read only mode

  - by user606521

  Ubuntu 12.04 File system goes to readonly mode frequently. First of all I have read this question file system is going into read only mode frequently already. But I have to know if it's not caused by something else than dying hard drive. This is server provided by my client and I am just runing there some node.js workers + one node.js server and I am using mongodb. From time to time (every 20-50h) system suddenly makes filesystem read only, mongodb process fails (due read-only fs) and my node workers/server (which are started by forever) are just killed. Here is the log from dmesg - I can see there some errors and messages that FS is going to read-only, and there is also some JOURNAL error but I would like to find cause of those errors.. http://speedy.sh/Ux2VV/dmesg.log.txt edit smartctl -t long /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-23-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. What I am doing wrong? Same is for sda2. Morover now when I type any command that not exists in shell I get this: Sorry, command-not-found has crashed! Please file a bug report at: https://bugs.launchpad.net/command-not-found/+filebug Please include the following information with the report:

  Read the article

• Ripping CD Audio simultaneously from 2 drives on one PC via USB or PATA - rip accuracy preserved?

  - by Rob

  I'm considering ripping audio (reading audio) from CDs using 2 drives simultaneously to speed up the process of ripping the CDs - i.e. 2 at a time rather than 1. Are there any issues with achieving maximum rip accuracy? In general I wondered if people have tried this and if the simultaneous streams from both rip activities would overload the host machine and cause packet loss or read retries resulting in a sub-standard CD-DA Audio CD rip? If it just means the rip is slightly slower (but still faster than sequentially doing one rip followed by another) but still of maximum accuracy then that is OK for me. I will be using dbPowerAmp to rip the CDs and converting to FLAC lossless format. Specific examples: There are 2 machines I intend to do it on: A Toshiba NB100 1.6Ghz Atom netbook, 2Gb RAM, running Windows XP Home with 1 external LG DVD/CD burner and external 1 LG Blu-ray burner attached via USB 2.0, ripping to the machine's 5400rpm internal hard drive. This rips from one CD drive very well, more than adequate, it is a nippy, fast little machine for its specification. A Desktop PC running Windows 7 Home Premium with MSI P4M900M2-L/ MS-7255v2.0 motherboard and 1.86Ghz Intel Core 2 Duo E6320, 7200rpm hard drive and 2Gb RAM, with an internal LG PATA DVD/CD burner (master) and a Philips DVD/CD burner (slave) on the same PATA bus (perhaps separate buses would be another option to consider here). Thoughts?

  Read the article

• Unusual Caching Issue with IE 7/8 and IIS 7

  - by Daniel A. White

  We recently moved a site into production running Server 2008 x64 and IIS 7. The ASP.NET pages apparently load just fine, but when it comes to IE 7 and 8, a weird caching issue has cropped up with the CSS and JavaScript files on the page. On a very sporadic schedule, IE does not get all the files necessary to compose the page (i.e. CSS and JS files). When I manually go to the missing files from the address bar, they come back from local cache as empty. I F5 these source files and magically they come down properly. I refresh the site after loading a few files and the cache seems to hold. This problem has only been reproduced (again, sporadically) on IE 7 and 8 running XP. Chrome and Firefox appear to be immune. We have set IIS to use server-side kernel caching for CSS, JS and images. We also have set to expire content for the App_Themes and Scripts directories to expire immediately. One initial thought it was a SWF loading an FLV on page load. These fixes have not remedied the problem. We had no problems on our staging server which is using Server 2003 and IIS 6. Any ideas would be greatly appreciated. P.S. It sounds similar to this problem: but we do have the Static Content module installed. http://serverfault.com/questions/115099/iis-content-length-0-for-css-javascript-and-images

  Read the article

• HTML Redirect issue with Apache2

  - by Vijit Jain

  I am facing an issue with the ProxyPass on my Apache server on Ubuntu. I have configured Apache to deal with Virtual Hosts on my server. There is an application with runs on the server and uses ports 8001 8002. I need to do something like www.example.com/demo/origin to display the contents that I would see when I visit www.example.com:8000. The contents to be displayed are a host of HTML pages. This is the section of the virtual host config that has issues ProxyPass /demo/vader http://www.example.com:8001/ ProxyPassReverse /demo/vader http://www.example:8001/ ProxyPass /demo/skywalker http://www.example.com:8002/ ProxyPassReverse /demo/skywalker http://www.example.com:8002/ Now when I visit example.com/demo/skywalker, I see the first page of port 8002, say the login.html page. The second should have been www.example.com/demo/skywalker/userAction.html, instead the server shows www.example.com:8000/login.html. In the error logs I see something like: [Mon Nov 11 18:01:20 2013] [debug] mod_proxy_http.c(1850): proxy: HTTP: FILE NOT FOUND /htdocs/js/demo.72fbff3c9a97f15a4fff28e19b0de909.min.js I do not have any folder htdocs in the system. This is only an issue while viewing .html pages. Otherwise, no such issue occurs. When I visit localhost:8001 it will show any and all contents without any errors or issues. www.example.com/demo/skywalker displays a separate webpage www.example.com/demo/origin displays a different webpage and www.example.com/demo/vader displays a different webpage. I have also tried to use one more type of combination, <Location /demo/origin/> ProxyPass http://localhost:8000/ ProxyPassReverse http://localhost:8000/ ProxyHTMLURLMap http://localhost:8000/ / </Location> This fails as well. I would greatly appreciate if anyone can help me resolve this issue.

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• Configuring port forwarding for SSH - no response outside LAN

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Windows 8 & Hyper-V Can't Bridge Wifi Connection

  - by xinunix

  So I have an odd issue that I can't quite figure out... I am running Windows 8 Enterprise on a Dell 6420 laptop. I have a Broadcom 802.11n wireless adapter. I am connected to an home router (Netgear WNDR3700) that is connected to the internet. It is a very simple home network setup. I am trying to stand-up a few VMs in Hyper-V and want the VMs to be able to access the internet over my wireless connection. I have found numerous examples of how to set this up using both External and Internal Virtual Switches but have yet to be able to get it to work on my machine. I have narrowed the issue down to the fact that my host machine always loses internet connection when I bridge my wifi connection (both when it is bridged automatically by windows when I setup an external virtual switch bound to the wifi adapter or if I do it manually by creating an internal virtual switch, right click on it and my wifi network and select "Bridge Connections".) In both cases after the bridge is established, my host machine can no longer connect to the internet. I am not sure where to start with troubleshooting this problem. After the bridge is setup, an ipconfig shows all netowrk devices on the machine as "Media Disconnected". I do know that the wireless adapter is connected to the router b/c it shows the connection as active and full-strength. The only thing I can possibly think of is that this machine also has the Cisco VPN client installed on it which installs a Cisco Virtual Network Adapter. Is it possible that this Cisco Virtual Adapter is causing me issues when I try to bridge? I saw some people had a similar issue with a VirtualBox virtual adapter when trying to share via Hyper-V. Any thoughts or suggestions on how to troubleshoot?

  Read the article

• PORT FORWARDING TO PUT MY WEB SERVER ON THE INTERNET

  - by Chadworthington

  I went to http://canyouseeme.org/ to check to see what my external IP address. Regardless of what port I enter, it tells me that the port is blocked. I have a LinkSys router that basically has the default settings with the exception that I have WEP encrptin setup and I have forwarded a few ports, including 80 and 69. I forwarded them to the 192.x.x.103 IP address of the PC which is running IIS. That PC runs Symantec Endpoint Protection, which I right mouse clicked in the tray to Disable. These steps used to make my PC visible so I could host my own web site in IIS on port 80, or some other port, like 69. Yet, the Open Port tool cannot see my IP when it checks eiether port and when I navigate to http://my external ip/ I get "page cant be displayed" At first I was thinking that maybe Comcast is blocking port 80, but 69 doesnt work eiether. I do not see any other blockking set up in my router and, as I mentioned, I went with teh defaults except where discussed. This is a corporate PC and Symantec End Point Protecion is new to it (this previously worked on teh same PC with Symantec Protection Agent), but I thought that disabling Sym End Pt from the tray, that that would effectively neutralize it. I do not have the rights to kill the program itself. Any suggestions on what else to try to make my PC externally visible?

  Read the article

• Fixing corrupt files or corrupt file table on a USB drive?

  - by Kelsey

  I was doing a virus scan on an external USB drive while copying data over to it. While AVG was scanning my system got locked up I think due to the USB drive running out of space and it required a reboot. Since that time all data on the external drive is no longer accessible. I can see all the files in the root and directories but I cannot browse into any of them as Windows 7 gives an error stating they are corrupt. I think the file table or whatever it uses to store the index of what exists on the drive has been corrupted since it still shows the the drive as being almost full but everything I do a properties check on says it is 0 bytes. Does anyone know how to 'unlock' or recover this data? Is there a way to rebuild the file table somehow? Luckily I can recover this data from other sources as a last resort but I would like to fix this if possible. Any help would be appreciated. Thanks.

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >