Search Results

Search found 21392 results on 856 pages for 'audio output'.

Page 254/856 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

  - by Matt

  i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

  Read the article

• Determinism in multiplayer simulation with Box2D, and single computer

  - by Jake

  I wrote a small test car driving multiplayer game with Box2D using TCP server-client communcations. I ran 1 instance of server.exe and 2 instance of client.exe on the same machine that I code and compile the executables. I type inputs (WASD for a simple car movement) into one of the 2 clients and I can get both clients to update the simulation. There are 2 cars in the simulation. As long as the cars do not collide, I get the same identical output on both client.exe. I can run the car(s) around for as long as I could they still update the same. However, if I start to collide the cars, very quickly they go out of sync. My tools: Windows 7, C++, MSVS 2010, Box2D, freeGlut. My Psuedocode: // client.exe void timer(int value) { tcpServer.send(my_inputs); foreach(i = player including myself) inputs[i] = tcpServer.receive(); foreach(i = player including myself) players[i].process(inputs[i]); myb2World.step(33, 8, 6); // Box2D world step simulation foreach(i = player including myself) renderer.render(player[i]); glutTimerFunc(33, timer, 0); } // server.exe void serviceloop { while(all clients alive) { foreach(c = clients) tcpClients[c].receive(&inputs[c]); // send input of each client to all clients foreach(source = clients) { foreach(dest = clients) { tcpClients[dest].send(inputs[source]); } } } } I have read all over the internet and SE the following claims (paraphrased): Box2D is deterministic as long as floating point architecture/implementation is the same. (For any deterministic engine) Determinism is gauranteed if playback of recorded inputs is on the same machine with exe compiled using same compiler and machine. Additionally my server.exe and client.exe gameloop is single thread with blocking socket calls and fixed time step. Question: Can anyone explain what I did wrong to get different Box2D output?

  Read the article

• Comparing the Performance of Visual Studio's Web Reference to a Custom Class

  As developers, we all make assumptions when programming. Perhaps the biggest assumption we make is that those libraries and tools that ship with the .NET Framework are the best way to accomplish a given task. For example, most developers assume that using ASP.NET's Membership system is the best way to manage user accounts in a website (rather than rolling your own user account store). Similarly, creating a Web Reference to communicate with a web service generates markup that auto-creates a proxy class, which handles the low-level details of invoking the web service, serializing parameters, and so on. Recently a client made us question one of our fundamental assumptions about the .NET Framework and Web Services by asking, "Why should we use proxy class created by Visual Studio to connect to a web service?" In this particular project we were calling a web service to retrieve data, which was then sorted, formatted slightly and displayed in a web page. The client hypothesized that it would be more efficient to invoke the web service directly via the HttpWebRequest class, retrieve the XML output, populate an XmlDocument object, then use XSLT to output the result to HTML. Surely that would be faster than using Visual Studio's auto-generated proxy class, right? Prior to this request, we had never considered rolling our own proxy class; we had always taken advantage of the proxy classes Visual Studio auto-generated for us. Could these auto-generated proxy classes be inefficient? Would retrieving and parsing the web service's XML directly be more efficient? The only way to know for sure was to test my client's hypothesis. Read More >

  Read the article

• arm-none-ebai-gcc does not work from mounted directory

  - by dmytro_lviv

  I want to build project for ARM micro controller. For this purpose in folder with project was placed script, which download toolchain and build him. After run this script toolchain was placed in folder with project. Folder with project placed on another logical disk (which shared between Win and Linux) and this disk is mounting each time when I start develop. (Mount by hand). When I start make, in terminal I receive error: make[3]: arm-none-eabi-gcc: Command not found The output from echo $PATH: /mnt/Smoothie-master/gcc-arm-none-eabi/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games The output from whereis arm-none-ebai-gcc: arm-none-ebai-gcc: All binaries files, which are relating to this toolchain are placed in the next directory: /mnt/Smoothie-master/gcc-arm-none-eabi/bin/ and has permissions: "-rwxrwxrwx" Before building this toolchain, I had another similar toolchain (another version of this), but installed through apt-get. And it was removed through apt-get before building new. Where is the problem? Thanks!

  Read the article

• External routing for local interfaces in a virtualized network

  - by Arkaitz Jimenez

  Current setup: br0| |-- tun10 -pipe-tun0(192.240.240.1) |-- tun11 -pipe-tun1(192.240.240.2) |-- tun12 -pipe-tun2(192.240.240.3) The pipe program is a custom program that forwards data back2back between two tun interfaces. The idea is puting 2 programs in .2 and .3 while keeping .1 as the local interface in the current machine. The main problem is that I want to route packets to .2 and to .3 through .1 and br0, but as they are local interfaces, the kernel ignores any routing instruction, it just delivers the packet to the proper interface. Tried iptables, but the nat table doesn't even see ping packets to those ifaces. A "ping 192.240.240.2" delivers a icmp packet with source and dest .2 to tun1, ideally it should deliver a source .1 dest .2 at tun1 through tun0-br0-tun1 Any hint? Here the output of some commands: Output

  Read the article

• Use TV (hdmi) with non-square pixels

  - by labsin

  I am having a problem when I connect my LG plasma tv (with a native resolution of 1024x768 pixels) to my 12.04 laptop. The pixels (actual pixels, not the signal) of my TV are stretched so it gets his 16:9 ratio. The pixels are rectangular (1.3333x1). Everything I display from my laptop oviously get stretched (4:3 stretched to 16:9). There is a different dpi in X and Y needed for it to display properly (some kind of anamorphic mode). Default Ubuntu uses a dpi of 96x96. I can change it using xrandr, but only square eg 100x100 or 70x70. Already looked here, but it seems Ubuntu totally ignore the displaySize in xorg.conf When I use the code below to see the dpi and nothing I do changes it. The displaySize also stays the same (calculated using 96 dpi and the resolution) xdpyinfo | grep -B2 resolution I use the propretary ATI drivers for my ATI Mobility Radeon HD 50xx but it is the same with the Radeon drivers. My temporary solution is to use: xrandr --output DFP1 --mode 1024x768 --scale 1.333333333333x1 --output LVDS --off But with this the right side of the screen is nog accesable. This is a known problem with xrandr --scale and ubuntu. This is because of a patch for the mouse/windows not going outside the screen. I search a way to change the DisplaySize or the dpi(to something not square like 128x96) when I connect the display.

  Read the article

• Design pattern for an automated mechanical test bench

  - by JJS

  Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

  Read the article

• Why MySQL sat for 2 minutes doing nothing?

  - by Alex R

  This was a one-time thing, not reproducible... But I saved the show innodb status output. Can anybody tell what's going on here? The simple insert took almost 3 minutes to complete. | InnoDB | | ===================================== 110201 15:58:10 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 34 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 11963, signal count 11766 --Thread 1824 has waited at .\btr\btr0cur.c line 443 for 118.00 seconds the sema phore: S-lock on RW-latch at 09D6453C created in file .\buf\buf0buf.c line 550 a writer (thread id 1824) has reserved it in mode wait exclusive number of readers 1, waiters flag 1 Last time read locked in file .\buf\buf0flu.c line 599 Last time write locked in file .\btr\btr0cur.c line 443 Mutex spin waits 0, rounds 527817, OS waits 7133 RW-shared spins 2532, OS waits 1226; RW-excl spins 1652, OS waits 1118 ------------ TRANSACTIONS ------------ Trx id counter 0 95830 Purge done for trx's n:o < 0 95814 undo n:o < 0 0 History list length 11 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, OS thread id 3704 MySQL thread id 551, query id 2702112 localhost 127.0.0.1 root show innodb status ---TRANSACTION 0 95829, not started, OS thread id 3132 MySQL thread id 534, query id 2702020 localhost 127.0.0.1 root ---TRANSACTION 0 95828, not started, OS thread id 3152 MySQL thread id 527, query id 2701973 localhost 127.0.0.1 root ---TRANSACTION 0 95827, ACTIVE 118 sec, OS thread id 1824 inserting, thread decl ared inside InnoDB 500 mysql tables in use 1, locked 1 1 lock struct(s), heap size 320, 0 row lock(s) MySQL thread id 526, query id 2701972 localhost 127.0.0.1 root update INSERT INTO log_searchcriteria (userid,search_criteria,date,search_type) VALUES ( NAME_CONST('userid',NULL), NAME_CONST('search_criteria',_latin1' SELECT SQL_C ALC_FOUND_ROWS idx_search.CTCX_LATITUDE, idx_search.CTCX_LONGITUDE, idx_search.b uilding_id, idx_search.LN_LIST_NUMBER, idx_search.LP_LIST_PRICE, idx_search.HSN_ ADRESS_HOUSE_NUMBER, idx_search.STR_ADDRESS_STREET, idx_search.CP_ADDRESS_COMPAS S_POINT, idx_search.UN_UNIT, idx_search.CIT_CITY, idx_search.ZP_ZIP_CODE, idx_se arch.AR_AREA_NAME, idx_search.BR_BEDROOMS, idx_search.BTH_BATHS, idx_search.ST_S TATUS, idx_search.CTCX_STYLE_TYPE, idx_s -------- FILE I/O -------- I/O thread 0 state: wait Windows aio (insert buffer thread) I/O thread 1 state: wait Windows aio (log thread) I/O thread 2 state: wait Windows aio (read thread) I/O thread 3 state: wait Windows aio (write thread) Pending normal aio reads: 0, aio writes: 1, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 151006 OS file reads, 120758 OS file writes, 6844 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 5, seg size 7, 24664 inserts, 24664 merged recs, 4612 merges Hash table size 553253, node heap has 629 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 5 2318193115 Log flushed up to 5 2318193115 Last checkpoint at 5 2318129891 0 pending log writes, 0 pending chkp writes 3036 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 213459462; in additional pool allocated 1720192 Dictionary memory allocated 240416 Buffer pool size 8192 Free buffers 0 Database pages 7563 Modified db pages 18 Pending reads 0 Pending writes: LRU 0, flush list 18, single page 0 Pages read 150973, created 28788, written 115137 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout -------------- ROW OPERATIONS -------------- 1 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread id 2992, state: flushing buffer pool pages Number of rows inserted 794294, updated 89203, deleted 13698, read 1453084305 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ Thanks

  Read the article

• Alternate method to dependent, nested if statements to check multiple states

  - by octopusgrabbus

  Is there an easier way to process multiple true/false states than using nested if statements? I think there is, and it would be to create a sequence of states, and then use a function like when to determine if all states were true, and drop out if not. I am asking the question to make sure there is not a preferred Clojure way to do this. Here is the background of my problem: I have an application that depends on quite a few input files. The application depends on .csv data reports; column headers for each report (.csv files also), so each sequence in the sequence of sequences can be zipped together with its columns for the purposes of creating a smaller sequence; and column files for output data. I use the following functions to find out if a file is present: (defn kind [filename] (let [f (File. filename)] (cond (.isFile f) "file" (.isDirectory f) "directory" (.exists f) "other" :else "(cannot be found)" ))) (defn look-for [filename expected-type] (let [find-status (kind-stat filename expected-type)] find-status)) And here are the first few lines of a multiple if which looks ugly and is hard to maintain: (defn extract-re-values "Plain old-fashioned sub-routine to process real-estate values / 3rd Q re bills extract." [opts] (if (= (utl/look-for (:ifm1 opts) "f") 0) ; got re columns? (if (= (utl/look-for (:ifn1 opts) "f") 0) ; got re data? (if (= (utl/look-for (:ifm3 opts) "f") 0) ; got re values output columns? (if (= (utl/look-for (:ifm4 opts) "f") 0) ; got re_mixed_use_ratio columns? (let [re-in-col-nams (first (utl/fetch-csv-data (:ifm1 opts))) re-in-data (utl/fetch-csv-data (:ifn1 opts)) re-val-cols-out (first (utl/fetch-csv-data (:ifm3 opts))) mu-val-cols-out (first (utl/fetch-csv-data (:ifm4 opts))) chk-results (utl/chk-seq-len re-in-col-nams (first re-in-data) re-rec-count)] I am not looking for a discussion of the best way, but what is in Clojure that facilitates solving a problem like this.

  Read the article

• Ubuntu Software Centre Issue (unity 11.10) after broken sun-java6-jre package installation

  - by Stephen Myall

  I have been installing software packages from USC and I am getting the following error message. Worked fine one minute then the message below. Tried to search but couldn't find a solution Previously I was installing the sun-java6-jre package in terminal and had an connection outage and it didnt complete. I attempted an apt-get -f install with no success. i dont know what to try next. I'm relatively new to Linux. The answer provided with a similar question on this site didnt resolve the issue for meClick on this link An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Details File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the sun-java6-jre package. This might mean you need to manually fix this package. Terminal Output Link http://dl.dropbox.com/u/48466855/Terminal%20output.odt

  Read the article

• svn diff including annotate/blame-alike information of when changes where made by who

  - by Wouter Coekaerts

  Can you add annotate/blame-alike information to svn diff, so that for every changed line it includes which user and revision changed that line? For example, an annotate-diff comparing revisions 8-10 could output something like: 9 user1 - some line that user1 deleted in revision 9 10 user2 + some line that user2 added in revision 10 The context, lines around it which haven't changed, may be included as well or not, doesn't matter. It's not just a matter of "quickly" writing a shell script combining the output of svn diff and svn annotate. annotate for example will never show you who removed a line. It's also not a matter of doing annotate on a revision in the past: We're not interested in who originally added the line that got removed (that's not the one who "caused" the diff), we want to know who removed it. I suspect the only way to implement something to do this is to inspect each and every commit between the two revisions being compared (and somehow map all the changes in the separate diffs to lines in the total diff)... Does there exist a tool that does something like that?

  Read the article

• Cron: job starts but doesn't complete

  - by Guandalino

  I have a problem with a cron job which starts but doesn't complete. Running the command manually works fine. I already read the page about cron issues and solutions here on AskUbuntu, tried the proposed solutions but didn't find an answer working in my case. I'm using Ubuntu 12.04. $ crontab -e SHELL=/bin/bash # otherwise it would be /bin/sh 59 16 * * * /bin/duply calendar backup > /tmp/duply.log Btw, the cron file ends with an empty line, as someone pointed out. Once the job has "finished"...: $ cat /tmp/duply.log Start duply v1.5.7, time is 2012-06-22 16:59:01. Instead, running manually the script it works correctly and gives this output: Start duply v1.5.7, time is 2012-06-22 17:06:39. [cut] ... here is a long output generated by duply. ... and yes, files have been backed up. [cut] --- Finished state OK at 17:06:42.581 - Runtime 00:00:03.170 --- I also tried to restart the cron daemon (sudo service cron restart) but nothing changed. Do you have any suggestion to fix the issue?

  Read the article

• using iptables to change a destination port but keep the ip the same.

  - by Scott Chamberlain

  I am playing around with transparent proxies, The current way I am doing things is the program makes a request to a computer on port 80, I use iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy so I want to do something like iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong, I am learning after all and constructive criticism is definitely appreciated.

  Read the article

• Alienware M17x R3: Possible downclock

  - by Ywen

  I installed recently Kubuntu 11.10 32 bits (had graphics driver issues, wanted to try on 32 bits version) on my new Alienware M17x, with a Core i7-2670QM CPU. Cores are supposed to be clocked at 2.2 GHz, however the output of $ cat /proc/cpuinfo | grep -i "hz" gives me: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 If useful, the AC adapter is plugged in (yet the ouput is the same when the computer is powered only by the battery) and I have Firefox and Eclipse running. Does /proc/cpuinfo reflect a possible automatic downclock made to save power if processor load is low or is this output abnormal? EDIT: Ok, I checked and yes, the ouput does vary in function of the load. I reach 2.2 GHz when needed. But my following problem remains. I was checking my CPU clocking because I experienced poor performances when reading 720p video files on Ubuntu with VLC or mplayer when on battery (and I believe VLC by default only uses CPU, not GPU to decode), whereas I haven't got such problems with VLC on Windows (which made me think it wasn't coming from a BIOS option, plus every option in the BIOS regarding the CPU is turned ON).

  Read the article

• nvidia segfault crashes XServer (12.04 fresh install)

  - by Sébastien GILLES

  I am on a fresh install of 12.04, and my video card is a Quadro FX 570, which appears to be supported (see output of unity_support_test below). But my Xserver crashes randomly and causes my session to just shutdown and bring me back to the logging screen. This happens several times per hour. After checking syslog it that a segfault in the nvidia driver is the cause of the problem: Jun 13 11:14:17 lima kernel: [86569.828982] Xorg[17940]: segfault at ffebeb69 ip b4c8f7aa sp bf8076dc error 4 in nvidia_drv.so[b47a7000+706000] Jun 13 11:14:36 lima gnome-session[18119]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :3.#012 The funny thing is that as I was reporting this bug, my xserver crashed again (!) and this time I got another error message: Jun 13 11:29:39 lima kernel: [87491.106441] NVRM: Xid (0000:02:00): 6, PE0001 Jun 13 11:29:39 lima gnome-session[26493]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :4.#012 Any idea as to what can be the problem given that i am on a fresh install with a supported video card ? Sébastien == Output of unity_support_test $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 570/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes

  Read the article

• iptables rule to submit packets matching a specific negative rule

  - by Aditya Sehgal

  I am using netfilter_queue to pick up certain packets from the kernel and do some processing on them. To, the netfilter queue, I need all packets from a particular source except UDP packets with src port 2152 & dst port 2152. I try to add the iptable rule as iptables -A OUTPUT ! s 192.168.0.3 ! -p udp ! --sport 2905 ! --dport 2905 -j NFQUEUE --queue-num 0 iptables throw up an error of Invalid Argument. Querying dmesg, I see the following error print ip_tables: udp match: only valid for protocol 17 I have tried the following variation with the same error thrown. iptables -A OUTPUT ! s 192.168.0.3 ! -p udp --sport 2905 --dport 2905 -j NFQUEUE --queue-num 0 Can you please advise on the correct usage of the iptables command for my case.

  Read the article

• Double vs Single Quotes in Chrome

  - by Rodrigo

  So when you want to embed google docs on a site you are given this chunk of code: <iframe width='500' height='300' frameborder='0' src='https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AiV6Vq32hBZIdHZRN3EwWERLZHVUT25ST01LTGxubWc&output=html&widget=true'></iframe> This works fine on my site. If you edit the page, we run the new content through some filters to escape out stuff and make sure it is valid html. After the process, the link above gets converted to this: <iframe frameborder="0" height="300" src="https://docs.google.com/spreadsheet/pub?hl=en_US&amp;hl=en_US&amp;key=0AiV6Vq32hBZIdHZRN3EwWERLZHVUT25ST01LTGxubWc&amp;output=html&amp;widget=true" width="500"></iframe> This will work on every browser except for chrome. Chrome thinks I am running JS in the src. I narrowed it down to a combination of double quotes and escaped '&' symbols. If i revert one of those back to the original state, the iframe works. I work in ruby where ' and " have different behaviors. Is Chrome doing the same thing? Is there a way to turn that off?

  Read the article

• Allow user to SUDO a script without password.

  - by John Isaacks

  I have a php script with this: <?php #echo exec('whoami'); $output = shell_exec('bash /usr/local/svn/bash_repo/make-live'); echo "$output"; ?> The make-live script contains this: #!/bin/bash cd /var/www-cake sudo svn checkout file:///usr/local/svn/bash_repo/repo/ echo "Head revision has been pushed to live server" So the PHP user who is www-data needs to have nopasswd for that script. I am told I need to add: www-data ALL=NOPASSWD: /usr/local/svn/bash_repo/make-live To sudoers to allow this. First I run sudo visudo but I have no experience with vi so I try to open it in gedit with export EDITOR=gedit && sudo -E visudo which then just opens a sudoers.tmp file which is empty. I add the line and save it. But it doesn't do save. So I just try sudo visudo and I add the line right beneath this part: # User privilege specification root ALL=(ALL) ALL www-data ALL=NOPASSWD: /usr/local/svn/bash_repo/make-live I closed out sudoers and reopened to verify that it has saved. I even restart apache. I run the php file and it still doesn't work. What am I missing?

  Read the article

• Wake laptop when lid is opened?

  - by crackout12

  I have a SAMSUNG laptop, which by the experience in the last months, has been a great one. I am actually implementing some functionality to it, and since I noticed, I am able to wake up my laptop from sleep by just opening the lid on Windows 7, however, I need to press to power button to wake up in Ubuntu. Using a program called i-nex, I noted that the kernel DOES dettect a "lid switch", and I am looking forward to use it to wake up function. Any ideas? UPDATE: Thanks @yossile for bringing up some clues! However, output of command cat /proc/acpi/wakeup does not show the LID device. I still tried the second set of commands you gave me with no effect. Then I tried experimenting, guessing that LID should be named by other value, so I tried enabling the others. No victory so far. But I noticed that devices that did not have any pci listings were disabled at all time no matter what I tried. Here is the output of command cat /proc/acpi/wakeup: root@samsung:~# cat /proc/acpi/wakeup Device S-state Status Sysfs node PCE4 S4 *disabled pci:0000:00:04.0 SBAZ S4 *disabled pci:0000:00:14.2 P0PC S4 *disabled pci:0000:00:14.4 GEC S4 *disabled PE20 S4 *disabled pci:0000:00:15.0 PE21 S4 *disabled PE22 S4 *disabled pci:0000:00:15.2 PE23 S4 *disabled PWRB S5 *enabled So maybe it could be that LID is either GEC,PE21, or PE23? Still, there is /proc/acpi/button/lid/LID/state file which shows that LID is opened. Any more ideas?

  Read the article

• Outputting SVN hook messages

  - by Luke Segars

  Hi all, I have a subversion repository on my Linux machine that is set up to export a new build of a project every time a new commit occurs using a post-commit hook. I would really like to be able to provide an output message to the committer containing some status information once the hook completes. Is it possible to redirect the output of the hook to come after the standard commit messages? For example: owner@dev-machine:/working/dir$ svn commit Sending FILE1 Sending FILE2 Transmissing file data ... Committed revision 13. Exporting project... Successfully exported to mysite.com The addition of the last two lines is the functionality I'm looking for.

  Read the article

• Dell 3721 Wifi problem Ubuntu 13.04

  - by Sebastian

  I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

  Read the article

• PSAD Firewall/ UDP flood?

  - by Asad Moeen

  Well I'm actually trying to block a UDP Flood on the Application port because the string "getstatus" is causing my application to make large output due to a small input to the attacker's IP. I installed PSAD firewall to do the job. psad -S shows 3000,000 logged packets at the application port and top ports in Scan but does not block the IP of the attacker however other IP Addresses with small number of connections are dropped. I'm thinking that since output is also being made to the attacker, this is why its not getting blocked because iptables rate-limiting is also exactly doing the same thing and not blocking the IP where outgoing connection is also made. Any guesses why it won't work?

  Read the article

• Is there a way to make AutoGK to resize the video?

  - by Jian Lin

  AutoGK is so far a good tool for converting video clips in DVD-R disc into .avi to post to YouTube. But I captured some Wii game play, and it is 16 : 9 ratio, but AutoGK only output the .avi in 4 : 3 ratio. Is there actually a way to tweak it to output the avi as 16 : 9? Otherwise, I need to run VirtualDub and download DivX codec to run it again to resize it 16 : 9. Any way this is done, or any other recommendations? thanks for helping.

  Read the article

• Errors when trying to compile the driver for the rtl8192su wireless adapter

  - by Tom Brito

  I have a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g sudo lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) sudo lsusb Bus 002 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1 Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• ubuntu box just redisplaying login screen after update

  - by David M. Karr

  My Ubuntu 12.04 box has been working fine. A recent update may have messed something up. I normally run remote windows on it, and I noticed that my windows were failing to start up. I then tried logging into it directly from the GUI console, and I'm seeing that after I press enter on the (valid) password, the page just redisplays. It's not a password error, as that would give me an inline error. I see some messages appear and disappear quickly between the login screen going away and then redisplaying, but they go away too quickly to read. I was able to run the non-gui login, and I did an update and upgrade, and then rebooted, but it's doing the same thing. I have a Samba connection from my Windows box, and that's still working. If it matters, here's my uname output (somewhat elided): Linux ... 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux What can I do to troubleshoot this? Note that when I select "Guest Session", it lets me log in and displays the window manager. This seems significant to me. Does this mean that something specific to my login is causing it to fail? Note: If it matters, here's the output from /var/log/dmesg. The line about gdm seems interesting: [ 9.815883] Bluetooth: RFCOMM TTY layer initialized [ 9.815887] Bluetooth: RFCOMM socket layer initialized [ 9.815888] Bluetooth: RFCOMM ver 1.11 [ 9.879088] [PCSPP,TRISTATE] [ 9.879092] parport0: irq 7 detected [ 9.883935] type=1400 audit(1341871177.871:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser" [ 9.884365] type=1400 audit(1341871177.871:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=851 comm="apparmor_parser" [ 9.950397] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 9.961160] init: gdm main process (907) killed by TERM signal [ 9.966358] lp0: using parport0 (polling).

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >