Search Results

Search found 8656 results on 347 pages for 'boot to vhd'.

Page 263/347 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• Vmware sphere setting up external network

  - by Tom Beech

  I've just setup vmware vsphere 5 on a remote server (rented dedicated server). I've added my first VPS (centos 5.8) barebones. It's not finding any IP (internal or external) on boot. I've had an extra external IP assigned to my server that I wanted to use on the VPS. I tried editing the eth0 config and adding the IP in there and turning off the DHCP, but it can't find any IP or ping google or do any networking type things. How do I route the IP to my VPS so I can access it remotely?

  Read the article

• Create bootable partition from image

  - by Carson Darling

  I have a Macbook Pro with a dead CD drive. I don't have easy access to a replacement drive. I'm trying to install Ubuntu, and I can't get the MBP to recognize a USB stick as a bootable media (I believe MBP's have issues with booting from USB in some cases). Is it possible to take a disk image and write it to a partition on the HDD so that I can then boot from that partition and then install the OS onto a third partition? Partition layout: 150GB OS X 50GB Ubuntu destination 5GB Ubuntu install image

  Read the article

• White Screen of Death

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

  Read the article

• MediaShield RAID 5 is showing up as 760GB when the actual size is 2.7TB

  - by Ilya Volodin

  I just finished setting up Windows 2003 Server on my new server. And I started setting up a RAID 5 for it. I have 4x1TB Hard Drives. From MediaSheild RAID Utility (at boot time) the RAID size is displayed as 2.7TB. Linux also shows it as 2.7TB. However, in Windows, everything (including Windows Disk Management as well as Windows based MediaShield utility) is reporting only 760Gb. I already tried converting partitioning table to GUID from MBR, because I read somewhere that Windows can only handle up to 2TB MBR tables, that didn't help much. Tried searching for partitioning utilities that I could use, but couldn't find anything free. Formatted the disk as NTFS partition from within Linux, it stop showing in Windows all together, even MediaShield windows utility isn't showing at anymore. Windows is installed on a separate 500Gb hard drive, that's setup not to support RAID. Any ideas?

  Read the article

• Can a virus corrupt a hard disk?

  - by sundar

  Shorter version: Hard disk corrupt, vendor claims warranty does not apply since it was "due to a virus" and "problems due to software are not covered under the warranty". Longer version: My Dell laptop recently refused to boot, and all attempts to 'repair' the Vista installation using the provided installation CD failed. I called up Dell support, and a representative took the laptop and after a day said the hard disk is corrupt. When I tried to ask for a replacement under the warranty, an official replied that the corruption was due to a virus, and "problems due to software are not covered under the warranty". Now, I get a doubt that he's trying to avoid having to provide it under the warranty. Is it possible for a hard disk to get corrupt due to a virus? If yes, is there any way we can detect it was due to a virus (as he claims to have detected)?

  Read the article

• Windows 7 - Runs in safe mode, crashes in "normal" mode

  - by JonHopkins

  A couple of days ago I came back from a meeting to find my laptop had locked up. Power lights still on but the screen was blank (by which I mean black, though still "backlit" so not dead). Didn't respond to anything. I rebooted and it powered up fine and I got to the login screen. I logged in and it seemed to be going fine for about 30 seconds (gmail notifier and pidgin popped up) then the same thing happened - black screen. If I boot into Safe Mode it's all fine, no problems. I've tried removing everything from the startup folders (All users and my login), everything from the Run section of the registry (Local Machine and my login) and I've disabled every service which doesn't run in Safe Mode (assuming anything running in safe mode is OK) but the problem still exists. I've scanned the memory for errors (all fine). Any thoughts on what else I could try?

  Read the article

• Cloning Win 7 installation from MBR to GPR drive and make it bootable

  - by Nelluk

  I've seen threads on similar topics - such as this one - but the answers never seem to solve how to make it bootable. I have Win 7 64-bit on a PC installed on a 2tb MBR volume. The motherboard is UEFI compatible. I just installed a secondary internal 3TB drive which will be partitioned as GPT. Is there a relatively easy way to clone my installation over to the new drive and have that drive be bootable? I have used EaseUS Partition Master to clone the C volume to the D volume, but that would not boot and I assume the issue is that one is MBR and one is GPT. Is there a process to do this?

  Read the article

• Nexus One USB freezes Vista SP2 Quad Core

  - by user25479

  My Nexus One (N1) will occasionally freeze my Vista 32bit SP2 Quad Core 2.4GHz during POST. MB is ASUS P5N-E SLI with 4GB of RAM. The PC will be booting and when I connect the N1 via USB, the boot sequence will freeze, then continue once I unplug the N1 USB link. It happens whether the N1 is in USB debugging mode and when it is not. I'm not sure whether this is an N1 hw/fw issue, system interaction with my PC, or a result of my N1 development environment (I'm using the Eclipse Galileo IDE for Java Developers, primarily compiling to API Level 7. Eclipse has also occasionally frozen although I haven't established N1 USB cause-and-effect on that issue). Is anyone else experiencing these symptom?

  Read the article

• Compiling the Linux kernel, how much size is needed?

  - by ant2009

  I have downloaded the newest most stable Linux kernel, 2.6.33.2. I thought I would test this using VirtualBox. So I create a dynamically sized harddisk of 4 GB. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4 GB, but the actual size is 3.5 GB. $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a Linux kernel? Are there any guidelines to follow when doing this? This is my first time, so just experimenting with this.

  Read the article

• Computer has video artifacts after been exposed to rain

  - by Sadie

  My desktop now displays video artifacts after been exposed to rain. Only a very small amount of moisture went inside the case. The only place I noticed any water was on the CPU socket. I used a hair dryer and paper towels to wick any remaining moisture. When I boot the PC it loads it the OS, but there are large numbers of video artifacts. The artifacts appear symmetric if that helps. I am wondering what components I need to replace. I'd like to salvage what I can. My setup: AMD Athlon x3, Asus main board (AM2 socket), nVidia GT 430 PCIe, 8gb (4gb x2) DDR3

  Read the article

• Why does the CentOS 5.8 install give an error about CD-ROM drive when using HP ILO?

  - by Mike B

  CentOS 5.8 I'm trying to install CentOS 5.8 on a box. I'm connecting the ISO to the server via a virtual disk using HP ILO. It initially seems to boot fine but in the middle of the anaconda text-mode package installation, it gives the following error: CD Not Found CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry. If I click OK, it gives me the same error. I don't understand how it could get this far and then complain about the CD-ROM drive. Any thoughts?

  Read the article

• Windows Server 2012 and Ubuntu 12.04.1 under Hyper-V

  - by Technicolour

  I've set up an instance of Ubuntu 12.04.1 LTS under Hyper-V 2012. However it seems to be nondeterministic as to whether or not it completes the boot process. I get a Kernel Panic, "IO-APIC + timer doesn't work!", which from my research is caused by not having integration services correctly installed? It was my understanding that the integration services were all now baked into the kernel? It should then be fine to update the OS (including any kernel updates, as I'm guessing that's what has happened) Being able to rely on this successfully booting would be great as I intend on using ssh for crisis situations.

  Read the article

• Computer is totally crashed

  - by Napster

  my computer kept restarting on its own at random times varying from 1 minutes, to 20 minutes(then goind in a constant restart loop every ~10 seconds). I had to turn it off and wait minutes or hours before attempting to restarting to go further in the boot process. Now, it just does not turn on. I posted this before: Computer crashes every 2 to 10 minutes but I did not have the time to check the temperature. I don't want to pay to get it checked up, but I want to know what is wrong. Is the processor fried? Thank you

  Read the article

• Revert "Deny" permissions in Windows 7

  - by saurabhj

  I made a very dumb mistake and I am hoping there is a way to fix this without having to boot in through a Linux Live CD and extracting the data. My user login to my Windows 7 system is: John John is part of the Administrator's group. I have a folder called "C:\Users\John" I tried to make this folder accessible to ONLY John (and deny from all other Administrators) by going to the Folder, Right Click Secturity tab and then selecting all the checkboxes under "Deny" while having selected the "Administrators" group. As a result, I cannot access this folder from any of the accounts: "John" and "Administrator" as both of them belong to the Administrators groupd and deny permissions out-weigh the "Allow Permissions" Is there any way I could revert this back? Thanks a million!

  Read the article

• Is there a "Run Level Configurator" for Windows XP?

  - by djangofan

  I have been having trouble with something causing my Windows XP system to take 6-8 minutes to startup from a cold boot. Something is happening during startup that is causing the system to crawl. I have a lot of Linux experience , especially configuring run levels so that some programs start before others do. I also know how to do that on Windows XP but its really complex, and with 50 services I'd have to keep a giant spreadsheet to keep it all organized. Is there such a thing as a Windows XP Tool that "emulates" the Linux run-level editors that I can use to control the order than services start on my system?

  Read the article

• Sonicwall settings for Polycom TFTP

  - by Michael Glenn

  I'm switching our VoIP phones (Polycom 301s and 501s) to our data network. They were previously segmented to their own network. This means disabling the DHCP on the Trixbox (Asterisk) server and configuring the Sonicwall TZ 210 DHCP to indicate that Trixbox is the TFTP server. The Polycom phones are stating "could not contact boot server". All phones are configured to TFTP and were confirmed working when previously using the Trixbox server for DHCP. Trixbox DHCP is now turned off. I've configured options 66(as String), 128(as IP) and 150(as IP) in DHCP and added them to a TFTP Option Group. I've enabled "Allow BOOTP Clients to use Range" for the Dynamic IP range and assigned the Option Group TFTP as the DHCP Generic Option Group. Any idea what I'm missing? Is there a separate tool to inspect the DHCP response to compare Trixbox to the Sonicwall?

  Read the article

• How best to set up MDT developement and production?

  - by nray

  What's your MDT 2010 test and prod setup? What do you consider best practice? Is it best to use linked deployment shares, and replicate from development to production when testing is complete? What about backing out, if something breaks? Does anyone run MDT shares in DFS, or is there no support in the WinPE boot image for DFS shares? Or what about moving the production share name from one deployment share to another, as you add and test more OS versions, drivers, attributes, etc?

  Read the article

• Problems enabling BitLocker on Windows 7 enterprise

  - by ericl42

  I had BitLocker turned on originally when I loaded the computer but had to turn it off to do some testing. I recently tried to turn it back on and I continue to get the following error: Blockquote A required TPM measurement is missing. If there is a bootable CD or DVD in your computer, remove it, restart the computer, and turn on BitLocker again. If the problem persists, ensure the master boot record is up to date. Blockquote I have verified that there is nothing in the DVD tray and that the laptop is not docked. I have also verified that TPM is running and I have no problems enabling BitLocker on a flash drive. I think it's a problem with my MBR since I am dual booting into Fedora as well but I am not sure how to fix it. (even though it did work a few months ago while I was also dual booted) Thank you for the help.

  Read the article

• What are "Missing thread recordng" erros when running fsck -fy?

  - by ohho

  There is some error reported when I run Disk Utility and verify the root volume on my OS X MacBook. So I boot and CMD-S into the shell mode and run /sbin/fsck -fy. Errors are like: ** Checking catalog file. Missing thread record (id = ...) In correct number of thread records ** Checking catalog hierarchy. Invalid volume file count (It should be ... instead of ...) ** Repairing Volume Missing directory record (id = ...) I'd like to know what is the cause of the above errors? Hopefully I will be more careful in the future to prevent them from happening again. p.s. I am using a SSD and so I assume mechanical hard disk error is less likely. Thanks!

  Read the article

• asus eee pc 1018p os installation

  - by cornerback84

  My friend has an asus eee pc 1018p. It has no cd/dvd drive (neither do he have a usb cd/dvd drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But midway to installation it was interrupted and the computer was restarted (not h/w or s/w issue but we did it). Now we cannot run the backup and we also tried to install windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs usb device driver to continue. It has USB 3.0 maybe thats why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't runs and when booting from USB it says that it needs device driver. Anyone has any idea what we should do?

  Read the article

• partitioning problems

  - by Remus Rigo

  I had on my laptop a dual system (Ubuntu 11.04 and Windows 7) and someway the partitions messed-up. Windows stopped from booting, I just got a blinking cursor, but Ubuntu worked fine. I tried to fix the windows boot (fixmbr, fixboot, bootsect /nt60 C:/....) but now grub was overwritten and I have no OS. Finally I formatted the hdd (low format), installed Windows, partition hdd with paragon partition manager and now I want to install Ubuntu, but Ubuntu sees an empty hdd, weird, can anyone tell me what can I do? EDIT: I have created: partition 1: 100MB ntfs - windows reserved (drive B) partition 2: 50GB ntfs win 7 (drive C) partition 3: 50GB ext3 linux partition 4: 'the rest' ntfs for data (drive E) (the swap i will create after)

  Read the article

• How can I free up disk space in my Ubuntu Hardy Heron install?

  - by rvs

  I'd like to make some room on /dev/sda1 without necessarily having to remove a whole bunch of applications (I've already gone through and deleted all frivolous apps). This is the state of /dev/sda1 currently: Dir: / Type: ext3 Total: 9.4GiB Free: 488.6MiB Available: 0bytes Used: 8.9GiB EDIT added du output from comments below: 769068 /var/lib/mysql 351208 /usr/lib 297060 /usr/local/bin/eclipse/plugins 184124 /usr/bin 175924 /usr/lib/openoffice/program 143940 /usr/local/bin/eclipsePHP/plugins 92520 /boot 81200 /opt/android-sdk-linux/add-ons/google_apis-6_r01/images 79964 /opt That's funny, because the tables in /var/lib/mysql are the reason that I ran out in the first place. But I need them, and room for many more possibly large db's.

  Read the article

• Major Issue with Asus M4A78T-E Bios

  - by user114721

  I am having major issues with my bios and I have tried three different forums in hopes that there is someone out there that can help me.... The issue is that every single time I turn off my computer, when I turn it back on the bios resets and tries to boot from a floppy drive....first problem is I dont have a floppy drive and secondly it does not read my HDD.... I tried everything to fix this...I tried replacing the cmos battery, I tried replacing the sata cable, and I tried a different sata port....none of these things seem to be working. Now the messed up part about all of this is that i am on my computer right now....If I take the battery out and put it back in and setup the bios again manually I am able to get into my computer...but this is NOT normal... Why is my bios resetting constantly when I power down my computer? Please assist me I need my computer for business

  Read the article

• OSX Menu bar doesn't appear til opening an application

  - by gms8994

  When I boot my MBP, the menu bar doesn't appear. When I open Mail.app or Safari, the menu bar appears. I've searched for a bit, and nothing seems to talk about this. Is there a way to fix this? UPDATE From the Console logs: 3/29/12 7:05:10.037 AM com.apple.launchctl.Aqua: load: option requires an argument -- D 3/29/12 7:05:10.037 AM com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths... 3/29/12 7:05:10.100 AM com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[153]) Exited with code: 1

  Read the article

• 1 TB hdd and no space to create a partition for linux !

  - by rangalo

  I have a brand new Acer aspire 5811 with core i5 processor and all that. There is windows 7 Home Premium pre-installed on it. I want to install arch and setup a dual boot system. The problem is: Windows shows 4 partitions 14 MB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB NTFS Data partition for windows 7 But GpartedLive cd and also arch setup show 5 partitions 938Kb UNKOWN system reserved partition 14 MB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB unusable space Because of this, I cannot create another primary partition. Can any body guide me about how should I go for creating partition for installing arch ? Note: I need to keep windows 7 working. regards.

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >