Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 264/670 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

• 10GE network: Is it still deadly expensive? Any options?

  - by BarsMonster

  Hi! I am building home cluster where I going to have about 16 nodes which can live with 1G ports, but I really want to have 10GE on file server & central node. It's all local, so no need for cabels longer than 3-5m. And ofcourse I want to spend as little money as possible (not going to spend more than whole cluster costs) :-) What are my options? 1) Legacy solution is to take some 24-48 port 1GE switch, and connect to file/central nodes via 4-8 aggregated links. This will work I guess, cost is very acceptable, but I am not sure if it's ok to use that much aggregated links. And ofcourse it would be hard to double bandwidth when needed... :-D 2) Switch with several 10GE uplink 'ports'. As far as I see, they all require modules which costs about 1000$, so I will need 4 10G modules, and 2 10GE cards... Smells like way more than 5000$+... 3) Connect file & central node via 2 10G cards directly, and put 4 quadport 1GE NICs on fileserver. I am saving on 2 10G modules and a switch, fileserver will have to do packet routing, but it's still gonna have alot of CPU's left :-) 4) Any other options? Infiniband? 5) Are MyriNet adaptors works fine? I guess there are no cheaper options? 6) Hmm... Scrap fileserver, put it all on central node and provide dedicated 1GE port for each of the nodes... This is sad...

  Read the article

• Extending a home wireless network using two routers running tomato

  - by jalperin

  I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

  Read the article

• ATI firepro will not detect a second DVI-D monitor

  - by John

  OK so weird issue here. I have previously been running 6 screens off of 3 of the older ATI firepro graphics cards but they had a problem with the heat sink getting too hot and warping the PCB resulting in total failure of the card, to replace my three dead cards I purchased a new-type ATI firepro with the newer heat sink design. I'm only using one at the moment to make sure they've fixed the problem before I waste more money on 2 more cards but this is where things start to get weird. The Firepro's only have one port on them, they connect to two monitors via a splitter cable going from the one port to two DVI connectors for the screens. When I plug two identical monitors in via their DVI inputs not matter what I do windows and Catalyst will only detect one screen. However if I use the VGA input on one of the screens with a VGA - DVI adaptor to plug it in to the card it works fine. This confuses me greatly. I'm currently using the ATI Firepro 2270 Graphics card with identical DELL U2311H screens. I can post the rest of the system spec as well if needed but I wouldn't have thought it would make much difference as it had no problem handling 6 screens before the graphics cards failed. Naturally both catalyst and ATI drivers are the most current version. ATI tech support has been absolutely zero help, they seemed to get stumped as soon as I verified that both screens were plugged in and connected properly. Anyone have any ideas?

  Read the article

• Wake on Lan Remote not waking PC while the PC does receive the packet.

  - by Nycrea

  Over the last couple of weeks, I have been trying to set up WOL from a remote location. When I use my laptop to wake the machine locally, it works just fine. (for some reason, when I try to wake from my phone with an app called "WOL wake on lan" it does not work locally either, but I'll get to that later) Anyway, when the machine is turned on, and I let it 'listen' for incoming magic packets (with a program called "WOL magic packet sender") on my specified port, it does receive them, though when turned off, the machine does not wake. When sending from phone, either locally or via 3G remotely, it does receive but does not wake as well. Because the machine does receive them when turned on and listening, but does not wake when turned off, I am convinced the cause of the problem is my receiving PC, rather than the router or the sender. Some extra info: The receiving machine is a PC running Windows 7 64bit. My router is the Netgear JWNR2000v2. I have the port I use forwarded to my PC's static IP in the router. If anyone could help, or just share your own story with the same problem, maybe we can work this out. Thanks a lot in advance.

  Read the article

• Unable to record using Jmeter: [help me very urgent]

  - by krish

  Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. 1. Launch jmeter 2.3.3, added thred group to test plan 2. Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings 3.Saved the settings 4. Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved 5.Now in the jmeter, started the http proxy server. 6. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

  Read the article

• Lighttpd mod_accesslog not logging fastcgi requests

  - by zepatou

  I have recently installed a lighttpd for serving a python script via mod_fastcgi. Everything works fine except that I don't get the requests handled by mod_fastcgi logged in the access.log file (requests on port 80 are logged though). My lighttpd version is 1.4.28 on a Debian 6.0. I used the same working configuration a Ubuntu server 10.04 with lighttpd 1.4.26 and it worked. Here is my config lighttpd.conf server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_compress", ) server.document-root = "/var/www/" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/home/log/lighttpd/error.log" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) accesslog.filename = "/home/log/lighttpd/access.log" url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) server.pid-file = "/var/run/lighttpd.pid" include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" conf-enabled/10-fastcgi.conf server.modules += ( "mod_fastcgi" ) fastcgi.server = ( "/" => ( ( "min-procs" => 1, "check-local" => "disable", "host" => "127.0.0.1", # local "port" => 3000 ), ) ) Any idea ?

  Read the article

• Am I able to forward traffic from an external subdomain to a specific local host?

  - by George Bowman

  I apologise in advance if the question doesn't make sense, please let me know. I've got a small LAN (~10 Virtual Servers) using Win Server 2008 as a DNS server. This is behind a smoothwall express 3.0 firewall with ports forwarded for specific services. I have a domain (123-reg) with the NS's that of afraid.org (DynamicDNS) and subdomains pointed to my (Dynamic) IP address e.g. subdomain1.example.com - 123.456.789.101. I think that adequately explains my set up. My question is, am I able to have subdomains e.g. subdomain1.example.com only point to a specific local host? Like so: subdomain1.example.com:80 - firewall(external facing) - server1.example.com:80 subdomain2.example.com:80 - firewall(external facing) - server2.example.com:80 I don't actually necessarily want to use port 80, otherwise I would just use VirtualHosts on apache, it is just an example port. Currently I can use either subdomain1.example.com OR subdomain2.example.com and they will both point to server1.example.com:80 I do not have to stay using Win Server 2008 for DNS, I am more than happy to move over to BIND if needs be, it was just easier to use Win Server 2008's DNS. I do not know if this is even possible, I have a feeling it isn't as I've only got one external IP address but any information is useful!

  Read the article

• Route return traffic to correct gateway depending on service

  - by Marnix van Valen

  On my office network I have two internet connections and one CentOS server running a website (HTTPS on port 443). The website should be publicly accessible through the public IP of the first internet connection (ISP-1). The other internet connection, ISP-2, id the default gateway on the network. Both internet connections have routers (the household-kind) with NAT, SPI firewalls etc. The router on ISP-2 is a Netgear WNDR3700 (aka N600) with original firmware. The problem is that the website is unreachable. Looks like incoming traffic on ISP-1 will reach the server but the returning traffic is routed through ISP-2, effectively making the site unreachable. As far as I can tell I can't do port based routing on the WNDR3700. What are my options to make this work? I've been looking at implementing an iptables / routing based solution on the server itself but haven't been able to make that work. Update: Note that the server has one network interface connecting it to both routers.

  Read the article

• How to Set up MySQL Server to utilize more memory

  - by Cyril Gupta

  Hi there, I have MySQL setup on Windows along with Plesk. The version is 5.0.45 Community. The databases I have on the server are MyISAM as well as InnoDb, but predominantly innodb. I had 8G memory on my server, but MySQL isn't going up more than 1.3G and tweaking the settings isn't helping. I tried to increase the memory allocation for innodb_buffer_pool_size, it works if I set it up to 1G, but if I set 2G, or above the server doesn't come back online! I want mySQL to use at least 5-6 Gigs of the memory I have for performance, but I can't get this to work. Can anyone please help? My mysql config file is below (there are 2 mysqld sections... when i used MySQL workbench it created another one!) [MySQLD] port=3306 basedir=C:\\Program Files (x86)\\Parallels\\Plesk\\Databases\\MySQL datadir=C:\\Program Files (x86)\\Parallels\\Plesk\\Databases\\MySQL\\Data default-character-set=latin1 default-storage-engine=INNODB query_cache_size=128M table_cache=1024 tmp_table_size=32M thread_cache=32 myisam_max_sort_file_size=100G myisam_max_extra_sort_file_size=100G myisam_sort_buffer_size=2M key_buffer_size=32M read_buffer_size=16M read_rnd_buffer_size=2M sort_buffer_size=8M innodb_additional_mem_pool_size=24M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=10M innodb_buffer_pool_size=1G innodb_log_file_size=10M innodb_thread_concurrency=8 max_connections=700 key_buffer=48M max_allowed_packet=5M sort_buffer=2M net_buffer_length=4K old_passwords=1 wait_timeout=20 connect_timeout=60 [client] port=3306 [mysqld] query_cache_min_res_unit = 4096 innodb_additional_mem_pool_size = 1048576 innodb_buffer_pool_size = 1G query_cache_limit = 1048576 key_buffer_size = 8388608 sort_buffer_size = 2097144 query_cache_type = 1 query_cache_size = 312M log-slow-queries connect_timeout = 5 wait_timeout = 20 thread_cache_size = 15 read_buffer_size = 131072 table_cache = 64

  Read the article

• Percona-server time out on /etc/init.d/mysql start

  - by geekmenot

  Every time I start mysql, using /etc/init.d/mysql start or service mysql start, it always times out. * Starting MySQL (Percona Server) database server mysqld [fail] However, I can get into mysql. Just wanted to know if there is a problem with the install because it happens all the time, not a one off error. mysql-error.log shows: 121214 11:25:56 mysqld_safe Starting mysqld daemon with databases from /data/mysql/ 121214 11:25:56 [Note] Plugin 'FEDERATED' is disabled. 121214 11:25:56 InnoDB: The InnoDB memory heap is disabled 121214 11:25:56 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121214 11:25:56 InnoDB: Compressed tables use zlib 1.2.3 121214 11:25:56 InnoDB: Using Linux native AIO 121214 11:25:56 InnoDB: Initializing buffer pool, size = 14.0G 121214 11:25:58 InnoDB: Completed initialization of buffer pool 121214 11:26:01 InnoDB: Waiting for the background threads to start 121214 11:26:02 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.2 started; log sequence number 9333955393950 121214 11:26:02 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121214 11:26:02 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121214 11:26:02 [Note] Server socket created on IP: '0.0.0.0'. 121214 11:26:02 [Note] Slave SQL thread initialized, starting replication in log 'mysql-bin.005163' at position 624540946, relay log '/data/mysql/mysql-relay-bin.000043' position: 624541092 121214 11:26:02 [Note] Slave I/O thread: connected to master '[email protected]:3306',replication started in log 'mysql-bin.005180' at position 823447620 121214 11:26:02 [Note] Event Scheduler: Loaded 0 events 121214 11:26:02 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.2-log' socket: '/data/mysql/mysql.sock' port: 3306 Percona Server (GPL), Release 29.2

  Read the article

• nginx redirect proxy

  - by andrew

  I have a web app running on a nginx server on local ip 192.168.0.30:80 I have this in my etc/hosts 127.0.0.1 w.myapp.in If someone accesses my app using a "w" subdomain, it shows a webdav interface, otherwise it runs normally (for example, someone calls http://myapp.in , it goes into the app, and http://w.myapp.in goes into webdav interface - this is done within the app, nginx has nothing to do with it) Because I don't have a dns or anything like that, users must access the app by ip. A problem appears if someone wants to access the webdav interface, because you cannot access the app by a subdomain - unless you write a line in your local hosts file, which is not a solution) A possible solution If it's possible to setup the nginx server so that if someone calls http://192.168.0.30 (on port 80), it goes normally into the app, but if a user tries to access say http://192.168.0.30:81 (another defined port) it redirects internally to w.myapp.in, and the app sees the subdomain Given the app, can this be done? If yes, what should I put in the nginx config file? And if you guys think of a better solution, I'm open to any.

  Read the article

• Connect to Apache times out randomly

  - by Amadan

  We are trying to set up an Apache server on a remote machine, but we experience strange behaviour. Checking with telnet remote.machine 80, one of these things happen randomly: Connect and serve content normally (no delay) Connect after a long pause Connect normally, then time out without response Timeout on connect Once connected, the request seems to be processed normally. These things do not occur if I connect from that machine directly to localhost 80. The Apache is dedicated, as is the server it runs on (runs only this one application, no-one else is using it for anything else). I am not an administrator of the remote site, and I do not know the network architecture over there, but apparently it's firewalled: (HTTP port is open, SSH port is IP-restricted, most others are closed). If there was any one pattern, I might have some ideas, but this variety of symptoms baffles me. Any ideas as to what could be causing this? Apache is 2.2; Server version is: Linux version 2.6.9-22.ELsmp ([email protected]) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:32:14 EDT 2005

  Read the article

• Single m0n0wall - Two LAN Subnets - How To Setup

  - by SnAzBaZ

  I have two LAN subnets that I need to link together they are 192.168.4.0/24 and 192.168.5.0/24 There is a m0n0wall running on 192.168.4.1. It's LAN connection goes out to our network switch, and it's WAN port goes out to our ADSL modem. WAN is connected via PPPoE. The 192.168.4.0 subnet contains all of our office workstations. The 192.168.5.0 subnet contains development servers and test machines that need to obtain internet access and be "managed" by computers on the 192.168.4.0 subnet, but need to be on their own subnet as well. I have a Draytek 2820N configured on 192.168.5.1 with it's WAN2 port configured as 192.168.4.25 and a default gateway of 192.168.4.1. Machines on the 5.0 subnet can connect to the internet via the m0n0wall just fine. I configured a static route on the m0n0wall LAN interface, Network 192.168.5.0/24 and Gateway 192.168.4.25. Machines on the 5.0 subnet can ping machines on the 4.0 network but the reverse does not work. I configured a new firewall rule on the m0n0wall that allows any traffic on the LAN interface with a source IP of 192.168.4.25 to be allowed. The DrayTek firewall is currently configured to pass all traffic regardless. When I try to ping a machine in the 5.0 subnet from 4.0 I see this in my m0n0wall log: BLOCK 14:45:27.888157 LAN 192.168.4.25 192.168.4.37, type echoreply/0 ICMP So the reply is being sent from the 5.0 subnet but is not being allowed to reach my workstation because the firewall is blocking it. Why is the firewall blocking it ? I hope the explanation of my network is clear, please ask if you require further clarification. Thank you.

  Read the article

• Nginx proxy upstream cached?

  - by Julian H. Lam

  Attempting to resolve an issue that's been annoying me for a bit. I've distilled the symptoms into a set of reproducible steps: I have two sites, siteA, and siteB. They are both Node.js applications running on different ports (for the sake of example, 4567 and 4568) Both applications have their own file in sites_available (plus a symlink from sites_enabled), which contain the directives proxy_pass http://node_siteA/ and proxy_pass http://node_siteB/ respectively, inside of a location block. They also each have an upstream block (defined globally?): upstream node_siteA { upstream node_siteB { server 127.0.0.1:4567; server 127.0.0.1:4568; } } Site A and Site B have nothing to do with each other. Yes, I am restarting (reloading, actually) nginx every time I make a change. If I take down site B and attempt to access it via the web, I am served site A. Why is this? Thoughts Other times, when I create a new Site C, for example, nginx refuses to show me anything except "Welcome to nginx!" for ~5 minutes. This suggests a resolver timeout, perhaps? When I access Site B after its config has been deleted, and it sends me to Site A, this sounds like nginx sending me to servers in a round-robin fashion...

  Read the article

• setting up tracd behind mod_proxy?

  - by FilmJ

  I'm having trouble setting up mod_proxy and tracd. Seems almost all the search results for this problem take me to the built-in trac documentation page that mentions it as an option. I have several VirtualServers already running on the box in question, so running tracd on port 80 or 443 is not an option, but I do want to make my trac server accessible on this machine without exposing an additional port via the firewall. Making things even more complicated is that I have multiple trac repositories being served by the same instance of tracd, and so I want to set it up so: http://trac.abc.com is proxy'd to localhost:8000/projects/abcproject, and http://trac.def.com is proxy'd to localhost:8000/projects/defproject. Currently, the setup I have below results in 100% 403 errors. The server is running as www-data and the directory where all trac files are stored is owned by www-data, AND tracd (as show below) is running as www-data, so not sure where it's getting hung up. The relevant configuration on /var/apache2/sites-enabled/trac.abc.com: ProxyPass / http://localhost:8000/abcproject ProxyPassReverse / http://localhost:8000/abcproject The relevant configuration on /var/apache2/sites-enabled/trac.def.com: ProxyPass / http://localhost:8000/defproject ProxyPassReverse / http://localhost:8000/defproject The command used to instantiate tracd: tracd -a defproject,/var/www/vhosts/trac-common/users.htdigest,DEFProject -a abcproject,/var/www/vhosts/trac-common/users.htdigest,ABCProject -p 8000 -b localhost -e /var/www/vhosts/trac-common/projects If I access the site at http://localhost:8000/ everything works fine, but if I try to access via any of the proxy'd hosts I end up with 403 at every turn. I've used mod_proxy successfully as described above for other servers, such as couchdb, so maybe this has to do with the headers sent by tracd??

  Read the article

• Apache can't get viewed from outside of my LAN

  - by Javier Martinez

  I fixed it in PORTS TRIGGER menu of my router. Thanks you anyway I have a weird problem related with (i think) my cable-router and my configured vhosts in Apache2. The point is I can't access from outside of my LAN to any of my configured vhosts if I set the http port of Apache to 80 and i add a NAT rule for it. Otherwise, if I set my Apache port to 81 (or any else) with its respective NAT rule on my router it works. My router is an ARRIS TG952S and I am using Apache/2.2.22 (Debian) ports.conf NameVirtualHost *:80 Listen 80 vhost1.mydomain.net.conf <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName vhost1.mydomain.net ServerAlias vhost1.mydomain.net www.vhost1.mydomain.net vhost2.mydomain.net.conf <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName vhost2.mydomain.net ServerAlias vhost2.mydomain.net www.vhost2.mydomain.net DNS records (using FreeDNS) are: mydomain.net --> pointing to another server vhost1.mydomain.net --> pointing to my server vhost2.mydomain.net --> pointing to my server iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-apache-noscript tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 80,443 fail2ban-apache tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 80,443 fail2ban-ssh tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-apache (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-apache-noscript (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Thanks you

  Read the article

• Fresh 12.04 Install - mySQL not starting

  - by Lee Armstrong

  I have a freshly installed Ubuntu 12.04 x64 server and I installed Percona server from their official repositories. Trouble is it will not start! mysql-error.log shows nothing obvious. 121129 12:16:54 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql/ 121129 12:16:54 [Note] Plugin 'FEDERATED' is disabled. 121129 12:16:54 InnoDB: The InnoDB memory heap is disabled 121129 12:16:54 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121129 12:16:54 InnoDB: Compressed tables use zlib 1.2.3 121129 12:16:54 InnoDB: Using Linux native AIO 121129 12:16:54 InnoDB: Initializing buffer pool, size = 12.0G 121129 12:16:54 InnoDB: Completed initialization of buffer pool 121129 12:16:54 InnoDB: highest supported file format is Barracuda. 121129 12:16:55 InnoDB: Waiting for the background threads to start 121129 12:16:56 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.1 started; log sequence number 1598476 121129 12:16:56 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121129 12:16:56 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121129 12:16:56 [Note] Server socket created on IP: '0.0.0.0'. 121129 12:16:56 [Note] Event Scheduler: Loaded 0 events 121129 12:16:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.1-log' socket: '/var/run/mysqld/mysql.sock' port: 3306 Percona Server (GPL), Release 29.1 121129 12:16:56 [Note] Event Scheduler: scheduler thread started with id 1 And the syslog shows... Nov 29 12:17:07 V-PF-SQL1 /etc/init.d/mysql[2206]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in Nov 29 12:17:07 V-PF-SQL1 /etc/init.d/mysql[2206]: #007/usr/bin/mysqladmin: connect to server at 'localhost' failed Nov 29 12:17:07 V-PF-SQL1 /etc/init.d/mysql[2206]: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Nov 29 12:17:07 V-PF-SQL1 /etc/init.d/mysql[2206]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Nov 29 12:17:07 V-PF-SQL1 /etc/init.d/mysql[2206]: The socket file is being created and I can access the server NOT using the socket using mysql -h 127.0.0.1 -P 3306 -u root --pPASSWORD

  Read the article

• Connection failed between Windows Servers

  - by Kerby82

  I'm setting up an infrastructure based on Windows Server 2012. The firewall is turned off and I can't access the Domain controller to check for the group policy. I'm experiencing some connection problem between servers. All the servers are running a site on the TCP Port 80 and I check with netstat that the web server is binding on every Ip of the servers. If i try to telnet from the server itself on the port 80 it works (using DNS name) if I try same telnet from another machine I get connection failed. The DNS works, the ping is successfull, the servers are on the same subnet, the firewall is turned off (even though windows advanced firewall says that some settings can be managed by the System Administrator, i guess group policy). I don't know how to troubleshoot further. Do you have any idea? Is that possible that the FW looks turned off but there are some group policy blocking the connections? (I also check group policy-Administrative Template-Network Connections- Windows FW everything is not configured) I need some hint on how to keep troubleshooting such a problem.

  Read the article

• Mount an VHD on Mac OS X

  - by janm

  Is it possible (how) to mount an VHD file created by Windows 7 in OS X? I found some information about how to do this on linux. There is a fuse fs "vdfuse" which uses virtualbox libs to mount filesystems supported by virtualbox. However I was unable to compile the package on osx because nearly all headers are missing and I doubt that it would work anyway... EDIT #2: Okay I got my hands dirty and finally compiled vdfuse (http://forums.virtualbox.org/viewtopic.php?f=26&t=33355&start=0) on osx. As a starting point I used macfuse (http://code.google.com/p/macfuse/) and looked at the example file systems. This led me to the following build script infile=vdfuse.c outfile=vdfuse incdir="your/path/to/vbox/headers" INSTALL_DIR="/Applications/VirtualBox.app/Contents/MacOS" CFLAGS="-pipe" gcc -arch i386 "${infile}" \ "${INSTALL_DIR}"/VBoxDD.dylib \ "${INSTALL_DIR}"/VBoxDDU.dylib \ "${INSTALL_DIR}"/VBoxVMM.dylib \ "${INSTALL_DIR}"/VBoxRT.dylib \ "${INSTALL_DIR}"/VBoxDD2.dylib \ "${INSTALL_DIR}"/VBoxREM.dylib \ -o "${outfile}" \ -I"${incdir}" -I"/usr/local/include/fuse" \ -Wl,-rpath,"${INSTALL_DIR}" \ -lfuse_ino64 \ -Wall ${CFLAGS} You actually don't need to compile VirtualBox on your machine, just install a recent version of VirtualBox. So now I can partially mount vhds. The separate partitions appear as block files Partition1, Partition2, ... on my mount point. However Mac OS X does not include a loopback file system and macfuse's loopback fs does not work with block files, so we need a loopback fs to mount the blockfiles as actual partitions.

  Read the article

• Poor write performance on Debian server running NFS with 22TB exported JFS filesystem

  - by user143546

  I am currently running a debian server that is exporting a large JFS filesystem (22TB) over NFS (nfs-kernel-server.) When attempting to write to the NFS share, the performance is very poor. The 22TB disk is sitting on a NAS mounted using iSCSI. It will bust for a moment near expected line speed, and then sit idle for several seconds. Very little traffic measured in the low kb/sec. The wait peeks on write. When reading from the NFS mount, the system operates at expected speeds (11MB/sec). The issue does not occur when using SFTP, rsync, or local coping (non-nfs). The issue persists between stable and testing releases. On the same machine I have a 14TB ext4 filesystem using the exact same export configuration that does not share the issue. This share is not in regular use and thus not consuming resources. NFS Server: cat /etc/exports /data2 10.1.20.86(rw,no_subtree_check,async,all_squash) cat /sys/block/sdb/queue/scheduler noop [deadline] cfq cat /etc/default/nfs-kernel-server RPCNFSDCOUNT=8 RPCNFSDPRIORITY=0 RPCMOUNTDOPTS=--manage-gids NEED_SVCGSSD= RPCSVCGSSDOPTS= NFS Client: cat /etc/fstab 10.1.20.100:/data2 /root/incoming nfs rw,noatime,soft,intr,noacl 0 2 cat /sys/block/sdb/queue/scheduler noop [deadline] cfq cat /proc/mounts 10.1.20.100:/data2/ /root/incoming nfs4 rw,noatime,vers=4,rsize=262144,wsize=262144,namlen=255,soft,proto=tcp,port=0,timeo=600,retrans=2,sec=sys,clientaddr=10.1.20.86,minorversion=0,addr=10.1.20.100 0 0 This problem has me pretty stumped. Any help would be greatly welcomed. Thanks.

  Read the article

• Extending ext4 partition on debian7.0 on vsphere

  - by VoidPointer

  I have allocated thin provisioning of 15GB when i found 8GB as insufficient. Now debian guest is not able to recognize the change of size. root@debian7-x64:~# lvdisplay --- Logical volume --- LV Path /dev/debian7-x64/root LV Name root VG Name debian7-x64 LV UUID EU6mg0-XTXC-ci3D-bQJi-7XN6-r8Hp-SYxcj0 LV Write Access read/write LV Creation host, time debian7-x64, 2013-06-25 12:02:49 +0530 LV Status available # open 1 LV Size 7.39 GiB Current LE 1892 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:0 --- Logical volume --- LV Path /dev/debian7-x64/swap_1 LV Name swap_1 VG Name debian7-x64 LV UUID xDNtoz-tJUq-M5D6-GGCN-gzcD-fwUv-fYYDR1 LV Write Access read/write LV Creation host, time debian7-x64, 2013-06-25 12:02:49 +0530 LV Status available # open 2 LV Size 376.00 MiB Current LE 94 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:1 root@debian7-x64:~# pvdisplay --- Physical volume --- PV Name /dev/sda5 VG Name debian7-x64 PV Size 7.76 GiB / not usable 2.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 1986 Free PE 0 Allocated PE 1986 PV UUID SehkzH-Gq8Y-jI2f-27Tb-uv1Z-tR1R-5OnTxR root@debian7-x64:~# sfdisk -s /dev/sda: 15728640 /dev/mapper/debian7--x64-root: 7749632 /dev/mapper/debian7--x64-swap_1: 385024 total: 23863296 blocks Help me to extend this partition. No problem in rebooting. I dont have any live CD. Environment : debian 7, with lvm, on vsphere, ext4 partition. Can provide more details when needed.

  Read the article

• Why do I need a managed switch and which one should I buy?

  - by ascanio1

  I bought a 2nd router and I want both routers to have direct WAN access to the modem. One of the 2 routers directs VOIP traffic to a telephone line port. This VOIP service is provided by the cable carrier which also leases the modem & the router. The cable company technician told me that this VOIP line uses IPv6 addressing and therefore I must employ an IPv6 capable/compliant Giga Hub/Switch or my telephone line won't work anymore. Pls advise me (brand/model) an IPv6 compliant, 2 port, switch to purchase. Pls educate me: By reading this forum I thought that hubs broadcast traffic to all ports, regardless of which input/output is being used and so, theoretically, they have nothing to do with IP. Correct? Same story for unmanaged switches, where the only difference is that these latter devices route traffic only to those ports which are detected to be in use. Correct? I also understood that unmanaged switches route traffic simply by detecting hardware use and not by selecting specific IP traffic. Correct? Finally, there are managed switches which DO select traffic based on IP and, therefore, only these managed switches are involved with IPv6... Why would my cable company explicitly tell me, over and over, that I must use an IPv6 compliant switch? Why would they need a managed switch instead of an unmanaged one? Thanks in advance for helping me understand!

  Read the article

• Apache2 default vhost in alphabetical order or override with _default_ vhost?

  - by benbradley

  I've got multiple named vhosts on an Apache web server (CentOS 5, Apache 2.2.3). Each vhost has their own config file in /etc/httpd/vhosts.d and these vhost config files are included from the main httpd conf with... Include vhosts.d/*.conf Here's an example of one of the vhost confs... NameVirtualHost *:80 <VirtualHost *:80> ServerName www.domain.biz ServerAlias domain.biz www.domain.biz DocumentRoot /var/www/www.domain.biz <Directory /var/www/www.domain.biz> Options +FollowSymLinks Order Allow,Deny Allow from all </Directory> CustomLog /var/log/httpd/www.domain.biz_access.log combined ErrorLog /var/log/httpd/www.domain.biz_error.log </VirtualHost> Now I when anyone tries to access the server directly by using the public IP address, they get the first vhost specified in the aggregated config (so in my case it's alphabetical order from the vhosts.d directory). Anyone accessing the server directly by IP address, I'd like them to just get an 403 or a 404. I've discovered several ways to set a default/catch-all vhost and some conflicting opinions. I could create a new vhost conf in vhosts.d called 000aaadefault.conf or something but that feels a bit nasty. I could have a <VirtualHost> block in my main httpd.conf before the vhosts.d directory is included. I could just specify a DocumentRoot in my main httpd.conf What about specifying a default vhost in httpd.conf with _default_ http://httpd.apache.org/docs/2.2/vhosts/examples.html#default Would having a <VirtualHost _default_:*> block in my httpd.conf before I Include vhosts.d/*.conf be the best way for a catch-all?

  Read the article

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• Switch Before Firewall / Router - Multiple public IPs

  - by rii

  I currently Have a 10Mbit Full duplex circuit connected to a small unmanaged switch which then connects to a Sonicwall Firewall / Router. I have several public IP addresses (/28) that are assigned to several devices in my setup. Now the problem is the small switch I have was lent to me and needs to be returned, I have replaced this switch with several other switches but for some reason any other switch I use causes the network to become extremely slow. I believe this is a problem with the autonegotiation of theses hubs, so I am thinking of purchasing a small managed switch (cisco 300 series) and making the receiving port on the swith Explicitly 10Mbit Full Duplex and see if this works. My question is, being that this is a managed switch and needs an IP, will I still be able to run my public ips through it? Say the circuit has 70.80.4.1 - 7 will I still be able to assign 70.80.4.2 to my firewall and 70.80.4.3 to my router connected to some other port in the switch? Will I have to assign the switch a public IP address in this range as well for it to "route" to those other devices or does the switch does not care what IPs goes through it while operating as a Layer 2 Switch? Any help would be greatly appreciated. Thanks in advanced!

  Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >