Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 268/670 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

  • Routing Traffic With OpenVPN

    - by user224277
    Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

    Read the article

  • Windows 7 does not detect my new hard drive?

    - by jasondavis
    I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

    Read the article

  • How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

    - by John
    I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

    Read the article

  • strange raid5 issue:

    - by 8steve8
    ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. the screenshot should show that the SNs match, which begs the question why the software doesn't realize the drive is a member of the array: http://img837.imageshack.us/img837/6145/both.png I'd like to know if anyone has experienced anything similar, and what should i do, can i force the drive to be recognized as a member (without wiping data)?

    Read the article

  • How can I get Solr listening on 0.0.0.0 instead of just localhost?

    - by Neil
    I'm trying to get Solr to listen on 0.0.0.0 instead of just localhost, and it doesn't seem to be picking up the configuration options. I downloaded apache-solr-1.4.1 from the Solr website, and I'm running: user@:apache-solr-1.4.1/example $ java -jar start.jar With these configuration options: <Call name="addConnector"> <Arg> <New class="org.mortbay.jetty.bio.SocketConnector"> <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> <Set name="port"><SystemProperty name="jetty.port" default="8983" /></Set> <Set name="maxIdleTime">50000</Set> <Set name="lowResourceMaxIdleTime">1500</Set> </New> </Arg> </Call> Where the only line changed from the default is this one: <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> And when I check netstat, I see this: $ netstat -an | egrep 'Proto|\b8983\b' Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:8983 0.0.0.0:* LISTEN tcp6 0 0 ::1:8983 :::* LISTEN Where Local Address should be 0.0.0.0:8983 instead of 127.0.0.1:8983. Does anyone know why this might not be working?

    Read the article

  • cannot connect to my nginx server from remote machine

    - by margincall
    I thought that it's iptables problem.. but it seems not. I really have no idea about this situation. I'm getting a server hosting(CentOS). I installed Nginx + Django and nginx uses 8080 port. A domain is connected to the server. When I executed "wget [domain]:8080/[app name]/" in the server, it worked. Of course, "wget 127.0.0.1:8080/[app name]/" has no problem. (wget [server ip]:8080/[app name]/, either) However, from other computers, connecting was failed. (message says, no route) I checked my firewall setting. I excuted these commands. iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -I OUTPUT -p tcp --sport 8080 -j ACCEPT iptables -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT /etc/init.d/iptables restart I don't really understand all options of commands and I think there were useless commands, but I just tried all googled iptables settings. But still I cannot connect to my server. What should I check, first? I don't know this is important, but add to this post. On 80 port, an apache server is running. It works fine, I can connect to apache from other computers. There is DB connecting issue, (PHP to MySQL) but I think that it is just PHP coding bug. please excuse my low-level English. I'm not native English speaker.. but I tried to explane well as far as possible. Thank you for reading this question.

    Read the article

  • Strategy to isolate multiple nginx ssl apps with single domain via suburi's?

    - by icpu
    Warning: so far I have only learnt how to use nginx to serve apps with their own domain and server block. But I think its time to dive a little deeper. To mitigate the need for multiple SSL certificates or expensive wildcard certificates I would like to serve multiple apps (e.g. rails apps, php apps, node.js apps) from one nginx server_name. e.g. rooturl/railsapp rooturl/nodejsapp rooturl/phpshop rooturl/phpblog I am unsure on ideal strategy. Some examples I have seen and or thought about: Multiple location rules, this seems to cause conflicts between the individual app config requirements, e.g. differing rewrite and access requirements Isolated apps by backend internal port, is this possible? Each port routing to its own config? So config is isolated and can be bespoke to app requirements. Reverse proxy, I am little ignorant of how this works, is this what I need to research? is this actually 2 above? Help online seems to always proxy to another server e.g apache What is an effective way to isolate config requirements for apps served from a single domain via sub uris?

    Read the article

  • setting up vpn server

    - by Lock
    I need help in visualising how to setup our VPN box when we move to our new network with Telstra. We have a safe@office 500P, which has a public IP and a private IP of 192.168.19.2. It is physically connected to our router, which has 4 different interfaces, one being 192.168.19.1. On the VPN box, we have a static route to forward everything to 192.168.19.1 which is the router, and from there it works out where to go. Now, we are moving to a Telstra WAN and things are setup a little differently. Our head office router has only 3 interfaces- 1 is for the link to the switch that has the fibre connection (so our route to the internet and other branches), 1 is for our 10.10.20.x network and one is for the local branch network. I really have no idea how to set this up as with the new setup, we will not have a port for it to plug into on the router. Could I just plug it into the 10.10.20.x network? Would I have to give it a public IP or can we just forward through the ports that it would use? Another suggestion was to VLAN our switch into two networks- one for the 10.10.20.x network and one for the network the VPN currently sits on (192.168.19.x), and setup the router to trunk between the port and the switch. Not sure how to do this. Sorry VPN's are definitely not my strong suit. Any advice appreciated!

    Read the article

  • How to make lighttpd respect X-Forwarded-Proto when constructing redirects for directories?

    - by Tim Landscheidt
    We have an nginx proxy at tools.wmflabs.org that receives requests by http and https and passes them by http on to lighttpds on a grid (one lighttpd per top-level path). Requests that reach the proxy by https are received by the lighttpds like this: HEAD /lighttpd-test/test HTTP/1.1 Connection: close Host: tools.wmflabs.org X-Forwarded-Proto: https X-Original-URI: /lighttpd-test/test User-Agent: curl/7.29.0 Accept: */* This works great except in the case where the URL references a physical directory and misses the trailing slash ("/"), as lighttpd then generates a redirect to the http URL: HTTP/1.1 301 Moved Permanently Location: http://tools.wmflabs.org/lighttpd-test/test/ Connection: close Date: Fri, 06 Jun 2014 14:50:29 GMT Server: lighttpd/1.4.28 The relevant parts of our lighttpd configurations are: server.modules = ( "mod_setenv", "mod_access", "mod_accesslog", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", "mod_cgi", ) server.port = $port [...] server.document-root = "$home/public_html" [...] server.follow-symlink = "enable" [...] server.stat-cache-engine = "fam" ssl.engine = "disable" alias.url = ( "/$tool" => "$home/public_html/" ) index-file.names = ( "index.php", "index.html", "index.htm" ) dir-listing.encoding = "utf-8" server.dir-listing = "disable" url.access-deny = ( "~", ".inc" ) [...] How can I make lighttpd respect X-Forwarded-Proto and use it when constructing redirects for directories? I'm aware that I could try to tackle this in nginx, but I'd prefer if I can fix it in lighttpd.

    Read the article

  • 20 1TB drives vs. 10 2TB drives in RAID5/6 server

    - by Hunter
    Hi everyone, I will be setting up a server at work and I need some advice on some details. The setup will be one blade-type server (8-core, 16GB RAM) with two subsystems - one for the main storage the other to back it up. I'm shooting for a 20TB array (I know it'll be less after formatting and parity drives). So is there any advantage one way or the other with either 20 1TB drives or 10 2TB drives? I'm not sure right now how many controllers I should have either (in the quote I have is a dual-port controller). I would think two controllers for a server of this size would be a better choice than the dual-port controller (but I really don't know). And would an array of this size have any performance issues in RAID 5 or 6 (I know RAID 5 or 6 are "slower" because of all the parity calculations). Also, these will be either WD RE3 (1TB) or the RE4 (2TB). Oh, also, for the backup array would it be ok to use the WD 2TB green drives (also in RAID5 or 6)?

    Read the article

  • MySQL InnoDB/socket issue on Mac OS X 10.6.4

    - by user55217
    I have an ongoing issue on my Macbook Pro OS X 10.6.4. Intermittently, my MySQL install will not create a socket on startup. Rebooting sometimes, but not always, solves the problem. Deleting the ib* files in /usr/local/mysql/data and then restarting sometimes, but not always, solves the problem. My error logs tell me the following: Plugin InnoDB init function returned error Plugin InnoDB registration as a STORAGE ENGINE failed Can't start server: Bind on TCP/IP port: Address already in use Do you already have another mysqld server running on port: 3306? Aborting It then appears to attempt to start again and generates this error 20 - 30 times: Unable to lock ./ibdata1, error 35 Check that you do not already have another mysqld process using the same InnoDB data or log files Though the socket file is not created, I can connect to my MySQL db directly over localhost. Although, this does not help me from a PHP standpoint. Any thoughts on what I can do to resolve the issue or debug further? I'm at a loss as to where to go from here.

    Read the article

  • cheap gigabit switch for small business

    - by neoice
    my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

    Read the article

  • How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

    - by John
    I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

    Read the article

  • Website is not accessible from server which is using proxy

    - by Bhoot
    I hosted a website in a win 2008 R2 server which runs in private domain. I set up bindings for port 80 and 443 for http & https respectively. Created inbound rule for port 80 and 443 also in windows firewall. After doing all this, i am still not able to access my website from remote machine. IE : Internet Explorer cannot display the webpage. Chrome : Oops! Google Chrome could not find xxxxxx Tried accessing website by ip address but no luck. I tried to ping that server but it says TTL expired in Transit. Now i found some more information over internet to check if the server is using any kind of proxy in between. I found my IP address at www.getip.com, but ipconfig/all gives me a different IP address. Is it really a problem if we use proxy ? I am not sure if i have concluded it correctly. But is there any way out to resolve this issue? Update ::: I figured it out. I have to call that website with external IP address. due to the proxy settings i was not able to call that website by the server's IP or name of that machine.

    Read the article

  • strange raid5 issue: [closed]

    - by 8steve8
    ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. the screenshot should show that the SNs match, which begs the question why the software doesn't realize the drive is a member of the array: http://img837.imageshack.us/img837/6145/both.png I'd like to know if anyone has experienced anything similar, and what should i do, can i force the drive to be recognized as a member (without wiping data)?

    Read the article

  • IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

    - by NVRAM
    I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

    Read the article

  • What ports, besides 80, need to be available to send (only send) email using phpmailer to gmail over SSL?

    - by Wobblefoot
    Using phpmailer I keep getting a 110 timeout and "Unable to connect to host" when sending email from my web server. The authentication details are right and they work on another server I have (login, pwd, ports etc and gmail acct set up for SSL connections on 465), but it's failing on my new server. FIREWALL: I allow related/established, port 80 and a port for SSH on INPUT, then this on OUTPUT: 7906 474K DROP tcp -- any any anywhere anywhere tcp dpt:smtp 0 0 ACCEPT tcp -- any any localhost.localdomain yw-in-f109.1e100.net tcp dpt:submission 0 0 ACCEPT tcp -- any any localhost.localdomain gx-in-f109.1e100.net tcp dpt:ssmtp 0 0 DROP tcp -- any any anywhere anywhere tcp dpt:submission 9 540 DROP tcp -- any any anywhere anywhere tcp dpt:ssmtp This output chain works on my other server and disabling it doesn't get mail delivered either. WEB SERVER: Varnish (80) Nginx (8088) Drupal 7 PHP5-FPM APC MySQL All works beautifully, except for outgoing email. What else could it be? I understand phpmailer does NOT require a local MTA or procmail (this is sort of the point - I don't want the security or admin overhead of a full blown MTA on my web server). Am I wrong? Do I need an MTA as well? What local ports and programs are used to authenticate over SSL and route mail using phpmailer? Any ideas at all greatly appreciated - wasted a day on this nonsense already!

    Read the article

  • What Logs / Process Stats to monitor on a Ubuntu FTP server?

    - by Adam Salkin
    I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

    Read the article

  • Which Cardbus/PCMCIA -> USB card works with external hard drive?

    - by Carl
    I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

    Read the article

  • file system damage

    - by jffrs
    I try recover the backup superblock on /dev/sda2 that contain ubuntu 12.04 LTS and partition ext4 with livecd ubuntu 10.04. the message is below root@ubuntu:/home/ubuntu# fsck.ext4 -b 163840 -B 4096 /dev/sda2 e2fsck 1.41.11 (14-Mar-2010) /dev/sda2 was not cleanly unmounted, check forced. Resize inode not valid. Recreate? yes Pass 1: Checking inodes, blocks, and sizes Programming error? block #7963637 claimed for no reason in process_bad_block. Programming error? block #11240437 claimed for no reason in process_bad_block. Root inode is not a directory. Clear? yes Inode 712 is in extent format, but superblock is missing EXTENTS feature Fix? yes Inode 98519 has compression flag set on filesystem without compression support. Clear? yes Inode 98519 has INDEX_FL flag set but is not a directory. Clear HTree index? what's the correct procedure?

    Read the article

  • My Ubuntu 10.04 server kills all WAN bandwidth when it's attached to my LAN. Where do you begin troubleshooting?

    - by rrc7cz
    First I should say that my Linux knowledge is minimal; just enough to set up some servers (Apache, Tomcat, Couch, etc). I built a MiniITX server to host some simple sites, act as an SSH tunnel while I'm away, and act as a torrent server. It was not properly secured for a long time (iptables was empty, all ports open, no firewall) though my router did not have much port forwarding set up beyond HTTP, FTP, and SSH. A week or two ago my bandwidth at home dropped from around 27Mbps to 2Mbps and my upload went from 7Mbps to 0.06Mbps. When I unplug the server from the LAN, by bandwidth shoots back up. I threw up a restrictive iptables, removed most of the port forwarding, and checked my router logs to see if there were any open connections from the server (malware?) but there were none. What would you do? What are the first things you'd check? I can of course reinstall everything from scratch, but I'd like to find the root cause.

    Read the article

  • Need recommendation: which USB card (PCMCIA) works with external hard drive?

    - by Carl
    I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

    Read the article

  • Iptables state tracking

    - by complexgeek
    Hi there. I've just taken over administration of a fairly complex firewall ruleset for a firewall box running Fedora Core 12, and there's one thing about it that is puzzling me. When I run nmap on the gateway from outside the network, I see all the expected services, but also sunrpc on port 111. The INPUT chain has DEFAULT DROP set, and there is no rule allowing port 111. As best I can tell (watching the packet counters before/during/after the scan) it's being allowed by the rule: "-m state --state RELATED,ESTABLISHED -j ACCEPT" but I don't understand why a brand new TCP connection would be considered RELATED or ESTABLISHED. Any suggestions would be greatly appreciated. EDIT: Conntrack modules: nf_conntrack_netlink 14925 0 nfnetlink 3479 1 nf_conntrack_netlink nf_conntrack_irc 5206 1 nf_nat_irc nf_conntrack_proto_udplite 3138 0 nf_conntrack_h323 62110 1 nf_nat_h323 nf_conntrack_proto_dccp 6878 0 nf_conntrack_sip 16921 1 nf_nat_sip nf_conntrack_proto_sctp 11131 0 nf_conntrack_pptp 10673 1 nf_nat_pptp nf_conntrack_sane 5458 0 nf_conntrack_proto_gre 6574 1 nf_conntrack_pptp nf_conntrack_amanda 2796 1 nf_nat_amanda nf_conntrack_ftp 11741 1 nf_nat_ftp nf_conntrack_tftp 4665 1 nf_nat_tftp nf_conntrack_netbios_ns 1534 0 nf_conntrack_ipv6 18504 2 ipv6 279399 40 ip6t_REJECT,nf_conntrack_ipv6 INPUT chain on the filter table: -A INPUT -s 192.168.200.10/32 -p tcp -m tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -s 127.0.0.0/8 -i lo -j ACCEPT -A INPUT -p udp -m udp --sport 67:68 --dport 67:68 -j ACCEPT -A INPUT -d 192.168.200.5/32 -i eth0 -j ACCEPT -A INPUT -d 192.168.1.2/32 -i eth0 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --dports 22,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --sports 22,25,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m multiport --sports 53,123 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -i eth0 -m state --state NEW -j ACCEPT -A INPUT -d {public_ip}/32 -m state --state NEW -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT eth0 is connected to the internal network, eth3 is connected to an ADSL modem in bridge mode, ppp0 is the WAN connection tunneled over eth3.

    Read the article

  • Debian boot problems

    - by psp
    I've got Debian server with one disk. No dual boot or anything fancy. Just Debian 6.0 (Squeeze). I rebooted the server today and now it doesn't boot. I get the following (from GRUB): error: hd0,msdos out of disk I then get a grub prompt grub rescue> I've been googling for ages with no luck. /etc/fstab > #/etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > aufs / aufs rw 0 0 > tmpfs /tmp tmpfs nosuid,nodev 0 0 I've run debian rescue mode and looked through the syslog. I see hundreds of entries like this: Jun 30 22:51:08 kernel: [ 615.217382] sd 2:0:0:0: [sda] Unhandled error code Jun 30 22:51:08 kernel: [ 615.217385] sd 2:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Jun 30 22:51:08 kernel: [ 615.217389] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 30 22:51:08 kernel: [ 615.217399] end_request: I/O error, dev sda, logical block 0 Jun 30 22:51:08 kernel: [ 615.217402] Buffer I/O error on device sda, logical block 0

    Read the article

  • i am using winsock2.h in c language the following errors are unuderstandable help required?

    - by moon
    i am going to paste here my code an errors :::: #include "stdio.h" #include "winsock2.h" #define SIO_RCVALL _WSAIOW(IOC_VENDOR,1) //this removes the need of mstcpip.h void StartSniffing (SOCKET Sock); //This will sniff here and there void ProcessPacket (unsigned char* , int); //This will decide how to digest void PrintIpHeader (unsigned char* , int); void PrintUdpPacket (unsigned char* , int); void ConvertToHex (unsigned char* , unsigned int); void PrintData (unsigned char* , int); //IP Header Structure typedef struct ip_hdr { unsigned char ip_header_len:4; // 4-bit header length (in 32-bit words) normally=5 (Means 20 Bytes may be 24 also) unsigned char ip_version :4; // 4-bit IPv4 version unsigned char ip_tos; // IP type of service unsigned short ip_total_length; // Total length unsigned short ip_id; // Unique identifier unsigned char ip_frag_offset :5; // Fragment offset field unsigned char ip_more_fragment :1; unsigned char ip_dont_fragment :1; unsigned char ip_reserved_zero :1; unsigned char ip_frag_offset1; //fragment offset unsigned char ip_ttl; // Time to live unsigned char ip_protocol; // Protocol(TCP,UDP etc) unsigned short ip_checksum; // IP checksum unsigned int ip_srcaddr; // Source address unsigned int ip_destaddr; // Source address } IPV4_HDR; //UDP Header Structure typedef struct udp_hdr { unsigned short source_port; // Source port no. unsigned short dest_port; // Dest. port no. unsigned short udp_length; // Udp packet length unsigned short udp_checksum; // Udp checksum (optional) } UDP_HDR; //ICMP Header Structure typedef struct icmp_hdr { BYTE type; // ICMP Error type BYTE code; // Type sub code USHORT checksum; USHORT id; USHORT seq; } ICMP_HDR; FILE *logfile; int tcp=0,udp=0,icmp=0,others=0,igmp=0,total=0,i,j; struct sockaddr_in source,dest; char hex[2]; //Its free! IPV4_HDR *iphdr; UDP_HDR *udpheader; int main() { SOCKET sniffer; struct in_addr addr; int in; char hostname[100]; struct hostent *local; WSADATA wsa; //logfile=fopen("log.txt","w"); //if(logfile==NULL) printf("Unable to create file."); //Initialise Winsock printf("\nInitialising Winsock..."); if (WSAStartup(MAKEWORD(2,2), &wsa) != 0) { printf("WSAStartup() failed.\n"); return 1; } printf("Initialised"); //Create a RAW Socket printf("\nCreating RAW Socket..."); sniffer = socket(AF_INET, SOCK_RAW, IPPROTO_IP); if (sniffer == INVALID_SOCKET) { printf("Failed to create raw socket.\n"); return 1; } printf("Created."); //Retrive the local hostname if (gethostname(hostname, sizeof(hostname)) == SOCKET_ERROR) { printf("Error : %d",WSAGetLastError()); return 1; } printf("\nHost name : %s \n",hostname); //Retrive the available IPs of the local host local = gethostbyname(hostname); printf("\nAvailable Network Interfaces : \n"); if (local == NULL) { printf("Error : %d.\n",WSAGetLastError()); return 1; } for (i = 0; local->h_addr_list[i] != 0; ++i) { memcpy(&addr, local->h_addr_list[i], sizeof(struct in_addr)); printf("Interface Number : %d Address : %s\n",i,inet_ntoa(addr)); } printf("Enter the interface number you would like to sniff : "); scanf("%d",&in); memset(&dest, 0, sizeof(dest)); memcpy(&dest.sin_addr.s_addr,local->h_addr_list[in],sizeof(dest.sin_addr.s_addr)); dest.sin_family = AF_INET; dest.sin_port = 0; printf("\nBinding socket to local system and port 0 ..."); if (bind(sniffer,(struct sockaddr *)&dest,sizeof(dest)) == SOCKET_ERROR) { printf("bind(%s) failed.\n", inet_ntoa(addr)); return 1; } printf("Binding successful"); //Enable this socket with the power to sniff : SIO_RCVALL is the key Receive ALL ;) j=1; printf("\nSetting socket to sniff..."); if (WSAIoctl(sniffer, SIO_RCVALL,&j, sizeof(j), 0, 0,(LPDWORD)&in,0, 0) == SOCKET_ERROR) { printf("WSAIoctl() failed.\n"); return 1; } printf("Socket set."); //Begin printf("\nStarted Sniffing\n"); printf("Packet Capture Statistics...\n"); StartSniffing(sniffer); //Happy Sniffing //End closesocket(sniffer); WSACleanup(); return 0; } void StartSniffing(SOCKET sniffer) { unsigned char *Buffer = ( unsigned char *)malloc(65536); //Its Big! int mangobyte; if (Buffer == NULL) { printf("malloc() failed.\n"); return; } do { mangobyte = recvfrom(sniffer,(char *)Buffer,65536,0,0,0); //Eat as much as u can if(mangobyte > 0) ProcessPacket(Buffer, mangobyte); else printf( "recvfrom() failed.\n"); } while (mangobyte > 0); free(Buffer); } void ProcessPacket(unsigned char* Buffer, int Size) { iphdr = (IPV4_HDR *)Buffer; ++total; switch (iphdr->ip_protocol) //Check the Protocol and do accordingly... { case 1: //ICMP Protocol ++icmp; //PrintIcmpPacket(Buffer,Size); break; case 2: //IGMP Protocol ++igmp; break; case 6: //TCP Protocol ++tcp; //PrintTcpPacket(Buffer,Size); break; case 17: //UDP Protocol ++udp; PrintUdpPacket(Buffer,Size); break; default: //Some Other Protocol like ARP etc. ++others; break; } printf("TCP : %d UDP : %d ICMP : %d IGMP : %d Others : %d Total : %d\r",tcp,udp,icmp,igmp,others,total); } void PrintIpHeader (unsigned char* Buffer, int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; memset(&source, 0, sizeof(source)); source.sin_addr.s_addr = iphdr->ip_srcaddr; memset(&dest, 0, sizeof(dest)); dest.sin_addr.s_addr = iphdr->ip_destaddr; fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); fprintf(logfile," |-IP Version : %d\n",(unsigned int)iphdr->ip_version); fprintf(logfile," |-IP Header Length : %d DWORDS or %d Bytes\n",(unsigned int)iphdr->ip_header_len); fprintf(logfile," |-Type Of Service : %d\n",(unsigned int)iphdr->ip_tos); fprintf(logfile," |-IP Total Length : %d Bytes(Size of Packet)\n",ntohs(iphdr->ip_total_length)); fprintf(logfile," |-Identification : %d\n",ntohs(iphdr->ip_id)); fprintf(logfile," |-Reserved ZERO Field : %d\n",(unsigned int)iphdr->ip_reserved_zero); fprintf(logfile," |-Dont Fragment Field : %d\n",(unsigned int)iphdr->ip_dont_fragment); fprintf(logfile," |-More Fragment Field : %d\n",(unsigned int)iphdr->ip_more_fragment); fprintf(logfile," |-TTL : %d\n",(unsigned int)iphdr->ip_ttl); fprintf(logfile," |-Protocol : %d\n",(unsigned int)iphdr->ip_protocol); fprintf(logfile," |-Checksum : %d\n",ntohs(iphdr->ip_checksum)); fprintf(logfile," |-Source IP : %s\n",inet_ntoa(source.sin_addr)); fprintf(logfile," |-Destination IP : %s\n",inet_ntoa(dest.sin_addr)); } void PrintUdpPacket(unsigned char *Buffer,int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; udpheader = (UDP_HDR *)(Buffer + iphdrlen); fprintf(logfile,"\n\n***********************UDP Packet*************************\n"); PrintIpHeader(Buffer,Size); fprintf(logfile,"\nUDP Header\n"); fprintf(logfile," |-Source Port : %d\n",ntohs(udpheader->source_port)); fprintf(logfile," |-Destination Port : %d\n",ntohs(udpheader->dest_port)); fprintf(logfile," |-UDP Length : %d\n",ntohs(udpheader->udp_length)); fprintf(logfile," |-UDP Checksum : %d\n",ntohs(udpheader->udp_checksum)); fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); PrintData(Buffer,iphdrlen); fprintf(logfile,"UDP Header\n"); PrintData(Buffer+iphdrlen,sizeof(UDP_HDR)); fprintf(logfile,"Data Payload\n"); PrintData(Buffer+iphdrlen+sizeof(UDP_HDR) ,(Size - sizeof(UDP_HDR) - iphdr->ip_header_len*4)); fprintf(logfile,"\n###########################################################"); } void PrintData (unsigned char* data , int Size) { for(i=0 ; i < Size ; i++) { if( i!=0 && i%16==0) //if one line of hex printing is complete... { fprintf(logfile," "); for(j=i-16 ; j<i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); //if its a number or alphabet else fprintf(logfile,"."); //otherwise print a dot } fprintf(logfile,"\n"); } if(i%16==0) fprintf(logfile," "); fprintf(logfile," %02X",(unsigned int)data[i]); if( i==Size-1) //print the last spaces { for(j=0;j<15-i%16;j++) fprintf(logfile," "); //extra spaces fprintf(logfile," "); for(j=i-i%16 ; j<=i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); else fprintf(logfile,"."); } fprintf(logfile,"\n"); } } } following are the errors Error 1 error LNK2019: unresolved external symbol __imp__WSACleanup@0 referenced in function _main sniffer.obj sniffer test Error 2 error LNK2019: unresolved external symbol __imp__closesocket@4 referenced in function _main sniffer.obj sniffer test Error 3 error LNK2019: unresolved external symbol __imp__WSAIoctl@36 referenced in function _main sniffer.obj sniffer test Error 4 error LNK2019: unresolved external symbol __imp__bind@12 referenced in function _main sniffer.obj sniffer test Error 5 error LNK2019: unresolved external symbol __imp__inet_ntoa@4 referenced in function _main sniffer.obj sniffer test Error 6 error LNK2019: unresolved external symbol __imp__gethostbyname@4 referenced in function _main sniffer.obj sniffer test Error 7 error LNK2019: unresolved external symbol __imp__WSAGetLastError@0 referenced in function _main sniffer.obj sniffer test Error 8 error LNK2019: unresolved external symbol __imp__gethostname@8 referenced in function _main sniffer.obj sniffer test Error 9 error LNK2019: unresolved external symbol __imp__socket@12 referenced in function _main sniffer.obj sniffer test Error 10 error LNK2019: unresolved external symbol __imp__WSAStartup@8 referenced in function _main sniffer.obj sniffer test Error 11 error LNK2019: unresolved external symbol __imp__recvfrom@24 referenced in function "void __cdecl StartSniffing(unsigned int)" (?StartSniffing@@YAXI@Z) sniffer.obj sniffer test Error 12 error LNK2019: unresolved external symbol __imp__ntohs@4 referenced in function "void __cdecl PrintIpHeader(unsigned char *,int)" (?PrintIpHeader@@YAXPAEH@Z) sniffer.obj sniffer test Error 13 fatal error LNK1120: 12 unresolved externals E:\CWM\sniffer test\Debug\sniffer test.exe sniffer test

    Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >