Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 267/1008 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

  • Ubuntu Server 12.10 No GUI Headless Boot and/or Reboot

    - by Ubuntu User
    I have a headless server running the latest Ubuntu Server 12.10. It does not have any GUI at all. I am having the same issue that others are having which is that when you boot or reboot without a monitor (headless) the computer does not boot. The solution presented to others was to edit their xorg.conf file. But since I do not want a GUI installed (and therefore chose not to install a GUI after installing Ubuntu 12.10) I do not have a xorg.conf file in the /etc/X11/ directory. Ubuntu is a widely used distro of Linux, especially for server applications, I absolutely love it. Therefore, there has to be someone who solved this already?

    Read the article

  • LAN visibility and network sharing

    - by takeshin
    I have two Ubuntu machines with wifi network cards configured as DHCP interfaces. machine1: inet addr:192.168.168.105 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 machine2: inet addr:192.168.168.104 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 They are connected to the router: inet addr: 192.168.168.252 Internet connection from the router is accessible on both of the machines. How to share files between those two? I have already tried few ways (eg. samba), but it looks like the machines are not visible to each other: @machine1$: ping 192.168.168.104 From 192.168.168.105 icmp_seq=1 Destination Host Unreachable What do I need to configure? Apparmor? Firewall?

    Read the article

  • Joining Two MKV files in Ubuntu?

    - by Ryan McClure
    I have an opera that I'm ripping to my computer in MKV format with Handbrake. This opera is on two discs. Is there a way to join the resulting MKV's together? They will have the same bitrate, resolution, etc. If I do this, can I keep chapters from both MKV files organized? And, since I have subtitles in the file (not burnt in), will they still stay intact? I'm not too sure if this question is off-topic or not. If it is, feel more than free to delete it. :)

    Read the article

  • How can I revive a dead translation team?

    - by Rohan
    I wish to translate ubuntu in Marathi language for which a translation team already exists. But the membership of the team is moderated and unfortunately no new member has been admitted in the team after 2010-Dec-12. All request of membership are pending after that date. I tried to contact administrator of the team at his personal email id but did not get any reply from him. As I am not a team member I can not upload my translated po file. Is there any way to take charge of the team and approve all pending request? It seems that no translation work is currently being carried out. I would like to do the work but I can not.

    Read the article

  • When selecting Bookmarks in Chromium causes force close

    - by pst007x
    Chromium or Google Chrome in Ubuntu 12.04, selecting Bookmarks from the drop down menu causes Chromium/Chrome to close. Terminal: pst007x@pst007x-Serval-Professional:~$ google-chrome ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream [466:466:24874766730:ERROR:gles2_cmd_decoder.cc(4932)] GL ERROR :GL_INVALID_VALUE : glDeleteProgram: unknown program ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream [466:466:24877302452:ERROR:gles2_cmd_decoder.cc(4932)] GL ERROR :GL_INVALID_VALUE : glDeleteProgram: unknown program [466:466:24878889327:ERROR:gl_context_glx.cc(163)] Couldn't make context current with X drawable. [466:466:24878999015:ERROR:x11_util.cc(1273)] X Error detected: serial 150, error_code 146 (GLXBadDrawable), request_code 135, minor_code 5 (Unknown) Aborted I have deleted my profile, I have installed the latest Chromium/Chrome and tried BETA and UNSTABLE releases. It seems to be an issue with my Ubuntu installation. Any ideas? Thanks Current Chromium Version: 23.01246.0r153452-Oubuntu1 (precise) Current Chrome Version: 21.0.1180.89-r154005 (Stable) pst007x@pst007x-Serval-Professional:~$ lsb_release -a LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise pst007x@pst007x-Serval-Professional:~$

    Read the article

  • Turn off all sounds from websites

    - by David Oneill
    Often, I am listening to music of my choosing. Is there a way to preemptively turn off all sounds originating from websites? I don't want to click the 'mute' button once the page loads. And sometimes, it won't even have a mute. :-/ I use Chromium and FireFox. ~~EDIT~~ I use XFCE, so my menu options are different. Is this a gnome-specific utility? Or, what is the command for this utility?

    Read the article

  • Do I need to uninstall Ubuntu after fresh Windows 7 installation?

    - by Dan
    I installed Ubuntu 12.04 from Windows 7 using Wubi. For reasons I won't elaborate here, I had to reinstall Windows 7. Now I want to uninstall Ubuntu. But there is no entry for ubuntu in Windows' Add/Remove Programs anymore. What I tried: running the Uninstall executable from Ubuntu's installation folder, which didn't do anything. delete the old installation folder No matter what I do Ubuntu continues to show up as a boot option together with Windows 7 whenever I start my machine. How do I completely get rid of the Ubuntu installation? Thanks.

    Read the article

  • Skype Video not working 13.04 & 13.10?

    - by MrA
    I am trying to fix the issue with the video calls. I can check the video from the option menu, it works fine. But it does not work while calling someone. It shows video disabled. How can i fix this issue? I am using Ubuntu 13.10 and skype version 4.2.0.11 I checked all sites including below links but could not find solution: Skype no video in 13.04 Skype Video Call Not Working Ubuntu 11.10 No video skype found Video doesn't work well in skype http://www.youtube.com/watch?v=WeaLCzB4qy8

    Read the article

  • Dual boot Win 7 Ubuntu - home and boot partitions have no mount point

    - by cwmff
    After installing Ubuntu 12.04.3 on a Windows 7 laptop, running Ubuntu Disk Utility showed the following partition information; /dev/sda1 NTFS, Bootable, Filesystem, Labled: System Reserved, 105MB, Not Mounted /dev/sda2 NTFS, no flag, Filesystem, no label, 84GB, Not Mounted /dev/sda3 Usage: Container for logical partitions. Partition Type: Extended (0x05). no flags. no label. Capacity: 416GB /dev/sda5 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 999MB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda8 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 30GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Mounted at / /dev/sda6 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 377GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda7 Usage: Swap Space. Partition Type: Linux (0x82). no partition label. no flags. Capacity: 8.4GB. sda2 contains Windows 7 but without a mount point sda6 should have been the Home partition and sda5 should have been the Boot partition but the mount points seem to have been lost and now everything but Swap has gone into the root partition sda8 (the Home folder also seems to be within sda8). How do I go about getting sda6 used as the Home partition and sda5 as Boot

    Read the article

  • Ubuntu 10.10 forgets desktop theme.

    - by Marcelo Cantos
    (I posed this question on superuser.com and haven't received any answers or comments, then I came across this site, so my apologies to anyone who has seen this already.) I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

    Read the article

  • How to find keycodes for Fn + keys in Ubuntu 11.10

    - by budwiser
    I'm trying to find out the keycode for Fn+? keypress (left arrow). Xev outputs FocusOut event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0,    keys:  4294967213 0   0   0   0   0   0   0   0   0   0   0   0   0   0   0              0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   If it is telling me the keycode here, I'm not able to interpret it so help would be appreciated. I'm also curious for finding out if it's possible to bind something to Fn+Del but when trying out this combination, Xev outputs KeyPress event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1984903, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XmbLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1985008, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False which is exactly the same as pressing del without Fn. So, summary for short How can I find keycode for Fn+? (left arrow)? Is it even possible to bind something to Fn+Del or am I facing windmills here?

    Read the article

  • Open port in gufw is closed, no incoming connection on deluge

    - by user66987
    I have a problem configuring gufw. I open ports on it, but when i test in deluge it shows as closed. Any help on setting up the firewall would be greatly appreciated. This is the output I get on the firewall in terminal: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 1346/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 970/cupsd tcp 0 0 0.0.0.0:55521 0.0.0.0:* LISTEN 17362/python tcp6 0 0 ::1:631 :::* LISTEN 970/cupsd tcp6 0 0 :::55521 :::* LISTEN 17362/python udp 0 0 10.0.0.125:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:1900 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53162 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53 0.0.0.0:* 1346/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 1312/dhclient udp 0 0 10.0.0.125:36948 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:37240 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:6771 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:6771 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:6771 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:50034 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:58340 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:56947 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:57059 0.0.0.0:* 17362/python udp6 0 0 :::49793 :::* 982/avahi-daemon: r udp6 0 0 :::5353 :::* 982/avahi-daemon: r kenneth@kenneth-K53U:~$ sudo ufw status Status: aktive Til Handling Fra --- -------- --- 6881:6891/tcp ALLOW Anywhere 6881:6891/udp ALLOW Anywhere 55521/tcp ALLOW Anywhere 6881:6891/tcp ALLOW Anywhere (v6) 6881:6891/udp ALLOW Anywhere (v6) 55521/tcp ALLOW Anywhere (v6) I also want to be able to use the firewall with linuxdc, so I need other ports open as well. This is connected to the firewall. Because when I turn off the firewall, the port is open. So this is not a problem with my modem. Do I need the firewall? The broadband modem has a hardware firewall. Update: Forgot to add. When my firewall is inactive, it closes ports after a time. So when I use linuxdc, I have to flush iptabels and activating it again. Is this supposed to do this when the firewall is deactivated? Update again: All my ports are closed now, flushing the iptable does not work anymore. I have uninstalled gufw, but still all my ports are closed. And to say it again, this has nothing to do with my broadband modem since it worked when I used windows 7. I need help to open the ports.

    Read the article

  • Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

    - by zewone
    I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe

    Read the article

  • Is it risky to install KDE on Ubuntu alongside Unity and Gnome?

    - by Vagrant232
    The last time I installed KDE and Gnome on the same OS (Opensuse 12.1), GDM and KDM started conflicting and they both stopped working properly and I was plagued with applications from both environments till the point the applications overview in gnome was flooded with useless KDE trash. Moreover, I still had parts of the KDE desktop appearing when I'm running Gnome (such as the password manager and kde fonts and some apps refused to give up the oxygen theme). If I install the plasma-desktop package on Ubuntu, am I at risk of having such issues? I just want KDE with the bare minimum number of applications; just the necessary ones to make things work. I'd rather not have dolphin installed either. Also, is it all right to install the kde-standard pack? Or should I just stick to the plasma-desktop pack?

    Read the article

  • Overheating laptop

    - by Moncef ben slimane
    i've been using ubuntu for ~2 months, when i installed it on my computer (laptop) it never overheat but a day, i don't know what happened, it over heated.. (70*C @ Idle) I've tryed what ever i found on the net, and as well, i can't change the CPU freq o.O, i5 M460 @ 2.53 GHz.. i have benn trying, jupiter (no result), lm-sensors (aswell), and the cpu freq thingy for unity (cpu wont move from 2.5GHz) Any help? (i'm a C++ user and PHP coder...)

    Read the article

  • How do I add text to an animated .gif in gimp?

    - by Carla
    I have just worked out how to create an animated.gif in gimp but I am having a problem adding text. When I create/add the text box and then save my.gif and view it, the text only flashes up over one frame/layer. How do I make the text last over the entire duration of the animated.gif? If you could explain in very simple terms, with the easiest solution, that would be wonderful as I am quite new to all this and very unsure of what I am doing! Thank you for any help you can give.

    Read the article

  • dual boot missing files on ntfs

    - by yehuda
    I have 3 partitions: one for win7 (ntfs), one for Ubuntu (ext4) and one just for data (ntfs so both operating systems can see them). My problem is that I had stored some files on the data partition using ubuntu and when i booted win7 all that data was gone! After that I couldn't find the files even when using Ubuntu. My files were simply GONE :( Is there something I can do in Ubuntu or is it just windows problem?

    Read the article

  • use ubuntu notebook as second monitor for fedora desktop

    - by YumTum
    I was wondering if there is a possibility to use my netbook with ubuntu 12.04 as a second monitor for my fedora desktop, because its keyboard is broken but everything else is running just fine. I already read about x2x, but I hope there is a more direct way to do this (I mean not over the WLAN but e.g. via LAN etc... ). Would it be possible to directly use the monitor without even running the laptop? For example through an VGA adapter? Thanks for your replies!

    Read the article

  • How to install Percona Xtrabackup to Ubuntu 12.04LTS?

    - by coding crow
    I am trying to install Percona Xtrabackup to my Ubuntu 12.04 LTS insatlled on Amazon EC2. I am trying to follow instruction on the Xtrabackup installation page here. The instruction follows as Add this to /etc/apt/sources.list, replacing squeeze with the name of your distribution: deb http://repo.percona.com/apt squeeze main deb-src http://repo.percona.com/apt squeeze main In my case I will replace squeeze with precise but when I open /etc/apt/sources.list for editing it says the following It is suggestion three alternatives instead of editing which are listed a.), b.) and c.). My Question What should I do to install Percona Xtrabackup to my box?

    Read the article

  • TOR Error permission issue

    - by LeChiffte
    I've tried reinstalling, updating, and removing and then reinstalling. Nothing seems to work. See screenshot below: the output of gedit /home/skynet/.tor-browser-en/LOG (The installation log) is: /usr/bin/tor-browser-en.sh: Your version in /home/skynet/.tor-browser-en is outdated or you do not have installed tor-browser-en yet. /usr/bin/tor-browser-en.sh: Extracting files to /home/skynet/.tor-browser-en/INSTALL. tar (child): /opt/tor-browser-en/tor-browser-linux64-3.6.2_en-US.tar.xz: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now

    Read the article

  • How to customise window decoration whilst using Compiz on Xubuntu?

    - by Benjamin
    I have installed Compiz on Xubuntu 11.10 with sudo apt-get install compiz compizconfig-settings-manager compiz --replace ccp & In the process the XFCE window decoration theme is overridden by that of Compiz (Gtk) which uses the Adwaita theme instead of the Greybird theme. Since Gtk is doing window decoration, I cannot change it back using the XFCE settings. I just need compiz for scale and window switch and I would like to return window decoration to XFCE (Xfwm4) or to be able to change the Gtk window decoration theme. How can I do that? I have found part of the (workaround) answer already: download Greybird Gtk theme install theme (here is where I failed I think) use dconf-editor to change the Gtk theme in org.gnome.desktop.interface The problem really at stage 2 is where do I place the theme? I tried in ~/.themes/ and then changed the value of gtk-theme in the editor to Greybird. But I saw no change.

    Read the article

  • Can't set permissions for files on an NTFS partition

    - by ashishsony
    I remember that I was able to run a Linux .exe that was placed on an NTFS partition earlier before I installed 10.10 RC. But if I try to run it now, I can't run it as it hasn't the execution permission. The bad part is that I can't change the permissions too. I'm chmod-ding +x but no change at all with its permissions. So this seems to be a bug? Any help? Though when I put it on ext4 partition, I can set the permission. But I want to do this as I did before, right from its default NTFS location.

    Read the article

  • How to remap Fn key combinations (Lenovo G500)

    - by Anatoli
    I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • Wireless keeps asking for password

    - by Lewis
    Hia I just installed 12.04 on my old ibook G3 (since i wiped the HDD) Now luckely i have a wifi-ethernet bridge on my pc to give the ibook intertnet but even when it is connected to eth0 (LAN) it keeps asking to connect to eth1(Wi-Fi) the router is using WPA2 Personal with AES I was just wondering, bescuse the router is upsatirs and the ibook is downstairs next to my PC. and the wifi connects upstairs, but I can't use it up there 'cos the batteiy is junk and i got no plugs that'll reach. Thanks in advance Lewis

    Read the article

  • Copy all bridge traffic to a specific interface

    - by Azendale
    I have a bridge/switch set up an a machine that has multiple ports. Occasionally, I have a vm running through virtualbox, and I'll have it use a virtual adapter and then I add the adapter to the bridge. I have heard that some switches can copy all the traffic they see to a specific port on the bridge, usually for network monitoring. I would like to be able to run some windows based network tools. I do not want to run Windows on the actual hardware, because it would be lots of work to duplicate my setup in windows, so I was thinking if I can copy all traffic to a port, I can send it to a VM with windows. How can I set this up? I think this might be ebtables area, but I don't know ebtables well enough to know for sure, and it always seems like (from my understanding of ebtables) ebtables does something with the traffic (drop, accept, etc), but never copies it.

    Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >