Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 269/1359 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Can't enable wireless lan on Fujitsu Siemens A1665G with Ubuntu 11.10 installed

  - by Theo

  I saw my old Notebook yesterday and wanted to make that work again. On Windows XP the wireless worked still fine. Then I installed new Ubuntu 11.10 32bit and I'm sadly not able to make the wireless enabled. [I replaced Win XP entirely] lspci lists following network: 08:0a.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) So after recommendation from this link I installed the b43 firmware module. iwconfig prints the following: wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associatd Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management: off As you can see, my wireless lan adapter is not turned on. sudo iwconfig wlan0 txpower auto Doesn't change anything. Then I tried to make it work with rfkill. rfkill list 0: phy0: Wirless LAN Soft blocked: no Hard blocked: yes sudo rfkill unblock all rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes remains the same. The question is now, how I could enable the hard blocked wireless LAN. There is no hardware switch for wlan integrated. However there is a button to change the state. I always thought this would be software sided, but it seems to make some hardware changes as well... The wireless LED is also not blinking (as it did on windows xp) I reset bios and searched for some settings in there, but it has only a few options and nothing to do with wireless settings, nothing works here.. At last I tried to install the acer hotkeys but I was not able to manage that. I installed the acerhkgui package, but in initializing progress, it was not able to compile acer hotkeys for my machine. There was a message that asm/linkage.h was not found while compiling. Do you have any ideas what I could do to make this hard blocked stuff disabled and my wireless card work? PS: I also tried sudo rm /dev/rfkill and a reboot to reinit that stuff... No success :(

  Read the article

• ISO checksum menu in nautilus

  - by dellphi

  I'm using Ubuntu 11.10 x64, Unity, and Nautilus 3.2.1 I want to be able to perform checksum ISO in Nautilus. I have searched and found: http://www.addictivetips.com/ubuntu-linux-tips/nautilus-actions-extra-add-more-features-to-ubuntu-context-menu/ and perform the procedures written in it. Once completed, the other menus appear, except the menu for "checksum verification". Then, when I run gksu nautilus-actions-config-tool I just asked to enter a user password, and .... nothing happens. What should I do, to bring up the "checksum verification" menu? I am very grateful for any response or advice given.

  Read the article

• Microphone not capturing sound on 12.04 Lenovo G580

  - by Yam Marcovic

  In both Skype and the Sound Recorder application, I am not capturing any audio from my built-in microphone. I'm not sure why. Otherwise, sound output is working well. I have tried running gstreamer-properties and setting the Default Input plugin to PulseAUdio as well (to match the output), and it didn't help. I have tried running alsamixer -V all and I only get 2 input-related entries: Capture(L R) which is on 100 and not muted (can't be either), and Analog Mic Boost which is on 20db. Extra info: Camera (video) is working well on Skype and Kamerka. Can you please help me get my microphone to work? lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0614000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0618000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e0617000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08) Subsystem: Lenovo Device 3979 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Lenovo Device 31a1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Slow DNS Resolution

  - by user4541

  After a clean install of 10.10 I'm finding DNS resolution takes quite a long time. Hitting any url takes a good few seconds (10 - 30) before the site is displayed. I'm thinking this is a DNS resolution issue due to the 'waiting' or 'looking up' text being displayed in Firefox and Chrome. I do not get this issue with Slackware Linux or Windows 7 so it is not network or DNS server specific issue. It's something on the client side. Looking around on Google I see there are a few other people with this issue. The ones that have reported a workaround by switching to openDNS are disabling IPV6 or dealing with another issue. Any help would be appreciated. My network card is wired: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express Thanks

  Read the article

• Why some user functions don't get recognised by bash?

  - by strapakowsky

  I can define a function like: myfunction () { ls -R "$1" ; } And then myfunction . just works. But if I do echo "myfunction ." | sh echo "myfunction ." | bash the messages are: sh: myfunction: not found bash: line 1: myfunction: command not found Why? And how can I call a function that comes from a string if not by piping it to sh or bash? I know there is this command source, but I am confused of when I should use source and when sh or bash. Also, I cannot pipe through source. To add to confusion, there is this command . that seems to have nothing to do with the "." that means "current directory".

  Read the article

• grub/burg listing a lot of os's

  - by Matthew

  I guess I've got more than one ubuntu installation (either two or three) along with a windows 7 installation. Each of the ubuntu installations also list something extra (maybe like a safe mode?) within grub. Firstly, how do I remove the ubuntu installations I don't use? (how do I first identify the one I do use? I log into it after booting it, but how do I delete the others) Also, how do I leave just a Windows 7 option and an Ubuntu option?

  Read the article

• Laptop freezes on boot, not sure where to start

  - by J. Pablo Fernández

  I have an Ubuntu laptop that stops responding when booting up. It will change between consoles with ctrl-alt-FN but pressing enter in the console would not even enter a blank line. The last printed line when booting up in recovery mode was "Skipping EDID probe due to cached edid". Any ideas what might be wrong? Pressing ctrl-alt-del successfully rebooted it when in that mode. Another symptom is that GRUB stopped booting automatically, not sure if related (I doubt it).

  Read the article

• Vdpau performance in Precise with Unity 3d

  - by bowser

  vdpau seems to be broken in Precise under Unity 3d. CPU usage ranges around 50-70% for 1080p movies while same movies utilizes around 5-10% in Natty with vdpau enabled (under Unity3d) The card is Nvidia G105m. It doesn't seem to be a Nvidia driver problem because in gnome-shell everything works as expected and I have tried different versions of Nvidia drivers (295.20, 295.33, 295.40 and the latest 302.XX from xorg-edgers) The results are all the same, works in Gnome Shell but not in Unity 3d. Disabling syn to vbank works if movie is not in full screen mode, but it doesn't work for full screen. I have searched around and haven't found much info. I am wondering if others are experiencing the same problem and if there are some known work around that I have missed. Unity 3d is otherwise very nice in Precise, but this is a show stopping issue for me (literally). Thanks. I have filed a bug here https://bugs.launchpad.net/unity/+bug/993397

  Read the article

• Wine: How to open a whole folder, not a single file?

  - by Boris Karl Schlein

  I am using foobar2000 under my Ubuntu with Wine since… I don't know. Now, with the new Ubuntu 12.10 release foobar2000 was not starting anymore correctly so I reinstalled it (foobar2000 1.1.15, wine 1.4). Naturally I have to set up my foobar2000 configuration from scratch but thats not a problem at all. Everything works fine except adding whole folders to the music library using the Add-button under "File-Preferences-Media Library". Problem is one can only open files with the Add-dialog but not a whole folder. Under Windows everything works fine. Editing the foobar2000 configuration file ([foobar2000-folder]/configuration/Core.cfg) by hand does not work… I also tried it with a hex editor. :( So… what can I do? Thanks. :)

  Read the article

• How to autostart Kupfer in Ubuntu 13.10?

  - by JJD

  I built Kupfer from source on Ubuntu 13.10 and installed it into ./local. In the preferences I checked Start automatically on login. However, Kupfer does not automatically start. The desktop file in ~/.local/share/applications/kupfer.desktop looks like this: [Desktop Entry] Version=1.0 Name=Kupfer Name[cs]=Kupfer Name[da]=Kupfer Name[de]=Kupfer Name[el]=Kupfer Name[es]=Kupfer Name[eu]=Kupfer Name[fr]=Kupfer Name[gl]=Kupfer Name[hu]=Kupfer Name[it]=Kupfer Name[ko]=?? Name[nb]=Kupfer Name[nl]=Kupfer Name[pl]=Kupfer Name[pt]=Kupfer Name[pt_BR]=Kupfer Name[ru]=Kupfer Name[sl]=Kupfer Name[sv]=Kupfer Name[tr]=Kupfer Name[zh_CN]=Kupfer GenericName=Application Launcher GenericName[ca]=Llançador d'aplicació GenericName[cs]=Spouštec aplikací GenericName[da]=Programopstarter GenericName[de]=Anwendungsstarter GenericName[el]=??????t?? efa?µ???? GenericName[es]=Lanzador de aplicaciones GenericName[eu]=Aplikazioen abiarazlea GenericName[fr]=Lanceur d'applications GenericName[gl]=Iniciador de aplicativos GenericName[hu]=Alkalmazásindító GenericName[it]=Lanciatore di applicazioni GenericName[ko]=?? ???? ?? ??? GenericName[nb]=Programstarter GenericName[nl]=Programmastarter GenericName[pl]=Aktywator programów GenericName[pt]=Lançador de Aplicações GenericName[pt_BR]=Lançador de aplicativos GenericName[ru]=???????? ??????? ?????????? GenericName[sl]=Zaganjalnik programov GenericName[sv]=Programstartare GenericName[tr]=Uygulama Çalistirici GenericName[zh_CN]=????? Comment=Convenient command and access tool for applications and documents Comment[cs]=Nástroj pro pohodlné provádení príkazu a prístup k aplikacím a dokumentum Comment[da]=Nemt kommando- og adgangsværktøj til programmer og dokumenter Comment[de]=Praktisches Befehls- und Zugriffswerkzeug für Anwendungen und Dokumente Comment[el]=?????? e??a?e?? e?t???? ?a? p??sßas?? ??a efa?µ???? ?a? ????afa Comment[es]=Herramienta para acceso y manejo de aplicaciones y documentos Comment[eu]=Komando eta atzipen tresna egokia aplikazio eta dokumentuentzat Comment[fr]=Outil pratique pour accéder à des documents et lancer des applications Comment[gl]=Ferramenta cómoda para controlar e acceder a aplicativos e documentos Comment[hu]=Kényelmes parancs és hozzáférési eszköz az alkalmazásokhoz és dokumentumokhoz Comment[it]=Comodo comando e strumento di accesso per applicazioni e documenti Comment[ko]=???? ???????? ??? ???? ??? ?? ? ?? ?? Comment[nb]=Praktiskt kommandoverktøy for programmer og dokumenter Comment[nl]=Handige opdracht- en toegangshulp voor programma's en documenten Comment[pl]=Wygodne narzedzie do uruchamiania programów i otwierania dokumentów Comment[pt]=Ferramenta conveniente para acesso e gestão de aplicações e documentos Comment[pt_BR]=Uma conveniente ferramenta de comando e acesso para aplicativos e documentos Comment[ru]=??????? ?????????? ??? ???????? ??????? ? ?????????? ? ?????????? Comment[sl]=Prikladno orodje za izvajanje ukazov in dostopa do programov in dokumentov Comment[sv]=Praktiskt kommandoprogram för åtkomst av program och dokument Comment[zh_CN]=???????????????? Icon=kupfer Exec=python /home/user/.local/share/kupfer/kupfer.py %F Type=Application Categories=Utility; StartupNotify=true X-UserData=$CONFIG/kupfer;$DATA/kupfer;$CACHE/kupfer Terminal=false

  Read the article

• How do I fix a "E: The method driver /usr/lib/apt/methods/http could not be found." error?

  - by Abe

  I tried updating my packages from the terminal and this is what I got: $ sudo apt-get update E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. E: The method driver /usr/lib/apt/methods/http could not be found. What does this mean? I'm using the United States mirror an I've tried using the main server for the mirror and I keep getting the same result is this because there are no updates?

  Read the article

• Empty tooltips in MATLAB

  - by GriffinPeterson

  I am running MATLAB R2013b. Under Unity, the built-in editor of MATLAB shows empty tooltips, as seen here: http://imgur.com/4VSq6i8 Under xfce the tooltips are showing up just fine. My system: Ubuntu 14.04, Intel i7 4770K. The question has already been posted somewhere else (http://stackoverflow.com/questions/21915939/matlab-code-analyzer-produces-empty-tooltips, http://www.mathworks.com/matlabcentral/answers/116987-empty-tooltips-in-code-analyzer ), but I think this is a Unity-specific problem. Any ideas?

  Read the article

• I think I killed my portable HD will trying to make Ubuntu bootable from it. How to undo?

  - by Jack

  I have OSX. My HD appears as two drives; one formatted for OSX, and the other FAT32 for everything. Note: I am a complete Terminal noob. I followed the How to create a bootable USB stick on OS X page. I installed it to the Mac formatted partition, which I'm 95% sure was a mistake. I was thinking more in terms of free space than proper format. Anyway, it doesn't boot, and I can't get the HD to appear when I plug it back into OSX. I have no idea how to undo what I did in Terminal. Any ideas?

  Read the article

• How to open files which are located in VirtualBox's Guest Machine from Netbeans of Host Machine

  - by Bakhtiyor

  I have Ubuntu 10.04 installed in my Host Machine and it has VirtualBox. I have Guest Machine wich runs Ubuntu 10.10. I have NetBeans installed in Host Machine and need to open my project files which are located in Guest Machine. The reason I need it is because in my working place I have not access to install any applications, that is why I have Guest Machine where I have Web Server installed on it and also I have one web application that I am developing. I need to open that web application files from Guest Machine's Netbeans in order to modify/create new files for my web application. I have configured SSH server of Guest Machine and added port redirection in the VirtualBox so that now I can connect to it from Host Machine. But I could not find any way to open those files from Netbeans. Could anybody give me advice about how can I do that please? UPDATE I forgot to say that I don't want to use SharedFolders.

  Read the article

• cannot access ubuntu 12.04 SAMBA share from windows 7 using hostname

  - by user98398

  I've been trying for days to get this working, and everywhere I look online it seems no one has a definitive answer, so here is the run down: I have an external drive attached to my ubuntu 12.04 machine, "nicholas-desktop." I have the entire drive shared over the network via SAMBA. If I try to access the drive from windows 7 by using "\nicholas-desktop" it fails saying it cannot locate "nicholas-desktop." However, if I use the current IP address assigned to my machine by my router's DHCP server by typing "\192.168.2.XXX" I have no problems accessing the share. if I try to ping my ubuntu machine's hostname from windows it fails. The same happens if I try to ping my windows machine, "nicholas-laptop" from my ubuntu machine. Again, if I use either machine's assigned IP address it works fine. Can someone please help me get this working? I don't want any workarounds like setting a static IP, or DHCP reservation, I want to be able to resolve hostnames from both sides. I have tried enabling SAMBA'a WINS server so I could resolve the hostnames using netBIOS, however that didn't work either, I may have made a mistake setting it up though. Thanks for your time, NCB

  Read the article

• Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

  - by cengbrecht

  My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

  Read the article

• Unable to install Ubuntu 12.04.1 on Virtualbox on Windows 7 Host

  - by arcube

  I would like to install Ubuntu 12.04.1 in a virtual box on windows 7 host however I get a black screen after selecting to install Ubuntu i.e. right after choosing English language I have tried the 32bit and 64bit version desktop version, have also read thru some guides e.g. http://www.psychocats.net/ubuntu/virtualbox but I could not find any solution to fix this problem. BTW I have Ubuntu installed using Virtual PC (not running at the same time), also I have mac OS (mountain lion) installed using Virtual Box so I do not think it is a problem with the virtual box or windows 7 host. My VM configuration is with 1 core and 1 GB of ram using 20GB VDI; rest is default config. My hardware is Core i7 3770k / Asus P8Z77-V Deluxe / GSkill 32GB which I believe should be more than sufficient to run another VM. I have moved my user profile from SSD to HDD via junction however IMHO it should not matter. Has anyone else come across this problem and found a solution? Any help/thoughts on how to solve this would be very much appreciated.

  Read the article

• Ubuntu won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Making my own custom Ubuntu

  - by Benny

  I was wondering, is it possible to make my own customized version of Linux based on Ubuntu 10.10 ? I am thinking of calling it something different but I was wondering besides making a custom Live CD I am talking about an Linux that people can install on there computers using Ubuntu installation method. I want to base it on something other than GNOME but be able to install it latter on. Thanks in advance, Benny

  Read the article

• Configuration tools for multiple monitors for X / Linux

  - by richard

  I have Ubuntu 10.04 running gnome and two monitors. I am wondering if a can get a better multi-monitor configuration tool. The one I have, gnome-display-properties, has too many problems, including: When I swapped my monitors over, the narrower (external) one now on the left. There is a width calculation error, such that I have a virtual monitor the width of the wide-monitor on the narrow-monitor and part of the wide monitor. And a virtual narrow-monitor on the remainder of the wide-monitor. Also the visible mouse pointer does is not aligned with the active spot, an x offset of one monitor width. I would like, in approximate order of importance: nobugs. to be able to select which is primary monitor. to have multiple configurations. configurations to be automatically selected based on which monitors are attached. configurations to be cycled (reliably) when display mode key is pressed. when a display is deactivated, for windows to migrate to remaining monitors. option to not change display resolution when mirroring, but to use side/top blanking bars to pad out screen.

  Read the article

• Help making TP-Link Wireless USB Adapter TL-WN723N work consistently

  - by Savvas Katseas

  I've only recently made the jump to Ubuntu, using 11.10/64 as my only desktop OS. Everything seems to be working fine, except my USB Wireless adapter, TP-Link's TL-WN723N which is randomly connecting and disconnecting. The connection time appears to be random, too: I've experienced hours of connectivity and lots of connections/disconnections. I've tried searching for a solution, but what I find doesn't concern this specific USB adapter. I'd like some help identifying the problem... I've also recently switched to using a D-Link router as a wireless hub, which creates its own wireless/n network. Unfortunately this didn't solve my problems, as the new n network can be joined, but there's no connectivity to the internet. I know that's not much info to help others solve my problem, so please let me know of what else I can provide to make this a better question -- and possibly help others facing similar trouble. lsusb reports that I'm using Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter

  Read the article

• Can't boot in Ubuntu after windows upgrade

  - by VanceAnce

  After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

  Read the article

• Install Ubuntu on Mac OS X Mavericks, MacBook Air

  - by Unknown

  I was wondering if its okay to install Ubuntu on my Macbook Air, and if it is okay please let me know the procedure. I would prefer to do it by NOT using reFind (not sure what the name is). The following is my system specification. Hardware Overview: Model Name: MacBook Air Model Identifier: MacBookAir6,2 Processor Name: Intel Core i5 Processor Speed: 1.3 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache (per Core): 256 KB L3 Cache: 3 MB Memory: 8 GB System Software Overview: System Version: OS X 10.9.2 (13C1021) Kernel Version: Darwin 13.1.0 Boot Volume: Macintosh HD Boot Mode: Normal MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.2)

  Read the article

• How to install the full Gnome 3 desktop in ubuntu

  - by Relik

  Just like the title says. I don't want just Gnome Shell I want to know how to install the whole entire desktop, with the latest GDM(not the 3.0.4 currently in the repos), all the default apps, all of it. I want to have a gnome desktop as pure as the latest Fedora, but of course I don't actually want to use fedora I been a Ubuntu user for years. Any ideas? or am I crazy? I cant find anyone else doing this, though I have found a few other people who want to do it. I currently have Gnome Shell 3.4, but I cant figure out how to install the new login screen, and I don't know what apps install by default other than epiphany and empathy, I also don't know if there is still more missing than just those things listed. I would really enjoy the full Gnome 3 experience.

  Read the article

• runt integrated intel graphics card + nvidia pcie graphics card?

  - by Roberto

  Its days I am searching for information/help. Is this possible at all? I am running Ubuntu 11.10 on an intel core i3 530 on a intel dh55hc mainboard. I have 2 monitors attached, one on dvi and one on hdmi. I want to ad a third or eaven a fourth monitor using an additional graphics card nvidia in pcie slot. I cant get an image on all monitors at the same time. I am wondering if this is possible at all? Any ideas where I can get information about this? Thanks in advance Roberto

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >