Search Results

Search found 9044 results on 362 pages for 'bad sector'.

Page 273/362 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

  - by Shasteriskt

  I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

  Read the article

• Perfectly reproducable select statement default ordering issue....

  - by Dave

  Hi, I've recently been chasing an issue with a client's db... solution found, but impossible to recreate. Essentially, we're doing a Select * from mytable where ArbitraryColumn = 75 Where MyTable has an Identity column, called 'MyIndentityColumn' - incremented by one in each insert. Naturally, and normally I would assume that the order returned would be the order in which they are inserted (bad assumption, but one which was forced onto me, through an inherited application - which has been patched). Essentially, I would like suggestions as to why the database, when restored to my local machine (same OS, same SQL server version - 200 sp3) same collation, and same backup instance restored on it, as a test DB on the client site. When I perform the above select, I get them in order of insert (i.e. identity column ordered ascending). On the client, it seems random (but the same 'random' order each time)... A few other points: I have the same collation on my test server as client Same DB backup restored to a test only I can access Same SQL server version and service pack Same OS Test DB is a new DB - new log and MDF... I have the problem 'solved' by adding an explicit order by clause but I want to undertand the cause of the issue, given the exact nature of my attempts to recreate it beuing futile, and perfectly recreatable on the client server... Thanks in advance, Dave

  Read the article

• Looking for some IIS redirect help/ideas

  - by CoreyT

  Right now we have a site with a LOT of static asp pages such as, www.site.com/123.asp. This is due to how our current site's CMS builds it's pages by default. I don't have an exact count but we have roughly 6000 asp files in the site right now. We are in the middle of a redesign and restructuring of the site, and are looking to migrate to SEO friendly URLs. The problem we're having right now is what do we do to redirect the old pages to the new friendly URLs? I know how to do redirects that is not the issue here. The problems I am coming up with right now are listed below. 1 - Is there a limit to the number of redirects in IIS? 2 - Would having even a few thousand redirects affect IIS performance? 3 - My understanding is that we would not be passing along page rank to the new URLs, is that true? (not a major question I can ask on more SEO forums if nobody here is sure) 4 - Would using something like the IIS URL Rewrite 2 module for IIS 7 help us out? Or would I still need to define several thousand unique redirects in it? Our server right now is running Server 2003, however in the redesign I would be open to migrating to Server 2008 R2 if there is a good case for it (i.e. the URL Rewrite module). Thanks for any guidance or help. I have been looking for a good way to do this for a while now and keep coming up with things that sound problematic and bad (such as having 6000 redirects).

  Read the article

• Family server setup [closed]

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• Create account for service

  - by Andy

  I am configuring a new server. The server is running Hudson that is going to copy some files from this server to another. The other server is a virtual machine. Both running Windows Server 2012. Hudson is started on server A with log on as "Local System". When I come to the copy phase it says "Access denied". Changing the log on to "Administrator" works. However, I guess this is bad. I do not have much experience with user management. I tried to create a own hudson account on both servers A and B. I tried to log on as hudson account in the service-management but it doesn't start. How would you create an account for this particular service that has access to the shared folder on server B and can be used to start the service on server A? I guess I need two accounts with same username and password on server A and server B? The folder on Server B is shared with everyone and the guest account is enabled.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Implementing emailing (bulk & event based) features for my website.

  - by Kabeer

  Hello. For my upcoming social networking website, I am looking for suggestions on the best way to implement emailing. Here are some of my requirements and constraints: Requirements: - Should be able to send emails based on events (new registrations, change password, etc.), promotions (advertisements based on user consent), bulk mails (newsletters), reminders (profile updates), etc. I hope I got the point through. - Should be able to process faults (incorrect email address, mail-box full, etc) - User initiated invites (inviting friends to connect) Constraints: - As of now I am looking at Godaddy for hosting. Subsequently I shall move to, may be Amazon Cloud. Godaddy seems to be excruciatingly conservative (not bad always) when it comes to the ability to send email. - My tests on Godaddy so far have been discouraging. There is limit to no. of emails I can send and sometimes if emails carries special characters it throws strange exceptions like there was a virus affected attachment (even though I hadn't attached a thing). The replies from Godaddy support have been equally funny. My intent is not to portray Godaddy as wrong but I am looking for a work-around that frees me from said constraints. I am looking for a mechanism / service that is either free of very cost effective. I wonder how other sites address this. Mine is a .Net / Windows based application.

  Read the article

• Tortoise SVN, find all non-added files?

  - by John Isaacks

  I am using Tortoise SVN on Windows. I have a deep directory structure (using cakephp). After creating several files I then went through and +added them. The new files show a ? next to them and a + next to them after set to add so it is easy to tell which files still need to be added. this is the same with folders. However if a new file is inside an old folder there will still be the green checkmark. You won't have any indicator telling you there is a new file. So I forgot to add one before a commit. This wouldn't be so bad as I could just add it and recommit. However, I also made this a tag, so I had recommit to the tag and the trunk. Anyways this wouldn't have been an issue if there was an indicator on existing folders that contain new files. Is there a way to set this up?

  Read the article

• Server slowdown

  - by Clinton Bosch

  I have a GWT application running on Tomcat on a cloud linux(Ubuntu) server, recently I released a new version of the application and suddenly my server response times have gone from 500ms average to 15s average. I have run every monitoring tool I know. iostat says my disks are 0.03% utilised mysqltuner.pl says I am OK other see below top says my processor is 99% idle and load average: 0.20, 0.31, 0.33 memory usage is 50% (-/+ buffers/cache: 3997 3974) mysqltuner output [OK] Logged in using credentials from debian maintenance account. -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.63-0ubuntu0.10.04.1-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 370M (Tables: 52) [--] Data in InnoDB tables: 697M (Tables: 1749) [!!] Total fragmented tables: 1754 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 19h 25m 41s (1M q [28.122 qps], 1K conn, TX: 2B, RX: 1B) [--] Reads / Writes: 98% / 2% [--] Total buffers: 1.0G global + 2.7M per thread (500 max threads) [OK] Maximum possible memory usage: 2.4G (30% of installed RAM) [OK] Slow queries: 0% (1/1M) [OK] Highest usage of available connections: 34% (173/500) [OK] Key buffer size / total MyISAM indexes: 16.0M/279.0K [OK] Key buffer hit rate: 99.9% (50K cached / 40 reads) [OK] Query cache efficiency: 61.4% (844K cached / 1M selects) [!!] Query cache prunes per day: 553779 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 34K sorts) [OK] Temporary tables created on disk: 4% (4K on disk / 102K total) [OK] Thread cache hit rate: 84% (185 created / 1K connections) [!!] Table cache hit rate: 0% (256 open / 27K opened) [OK] Open file limit used: 0% (20/2K) [OK] Table locks acquired immediately: 100% (692K immediate / 692K locks) [OK] InnoDB data size / buffer pool: 697.2M/1.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Increase table_cache gradually to avoid file descriptor limits Variables to adjust: query_cache_size (> 16M) table_cache (> 256)

  Read the article

• NTFS frequent corruption when writing many small files, index $I30 error

  - by david sedai

  I'm running Windows 7 Ultimate on a laptop with a 500G HDD, and had all partitions formatted as NTFS. I do a lot of programming and LaTeX typesetting, both of these involves a large amount of reading/writing/deleting to a lot of small files, such as C++ library headers or LaTeX packages. The problem is that frequently, when there is a large number of writing to files, the partition being written to often corrupts, the chkntfs e: returns dirty, where e: is the partition being written. I've re-formatted the drive, I've contacted the laptop manufacturer and had the HDD checked, the HDD is not faulty, there are no bad sectors, and I've tried a brand new HDD, to no avail, and the other partition on the same physical drive doesn't have this issue. I'm pretty sure that it's no hardware related. I've searched the Microsoft support pages, one page http://support.microsoft.com/kb/982018 provides an update for Advanced Format Disks, which I've already installed. The chkntfs log shows $130 index errors. I'm at a loss here. Can anyone help? Thanks in advance.

  Read the article

• vSphere Promiscuous mode only receiving packets one way from network switch

  - by steve.lippert

  We have two network switches, a POE switch (SwitchA) to power our phones / users computers and a non-POE switch (SwitchB for the rest network.) Each switch is setup to do port mirroring to support our VoIP recording system. SwitchA does port mirroring on specific ports if we need to record a user. SwitchB mirrors one port to monitor our work at home users (Internet comes in from managed router, to switch, back out to our firewall.) These two port mirroring setups feed into one vmware vSphere 4.1 server, it has four total physical cards. The other two NICs feed into an unmanaged switch for connecting to the rest of the network. Once into the vSphere server all network ports go into a vSwitch, and then one of the servers (Windows 2008 R2) sniffs them out and does its thing. Everything is working fine and dandy from SwitchB. But on SwitchA we only receive one side of the VoIP packets (going out to the phone, nothing coming in from the phone). Troubleshooting steps I have taken so far: I hooked up my laptop to the monitor port on SwitchB and I see both sides of the packets. I swapped which network interface is plugged into the monitor port on SwitchA. Because everything feeds into one vSwitch / vNetwork and both sides of the conversation arrive just fine from SwitchB I believe everything is configured correctly on the vSphere server/guest. What could be causing one way packets to arrive on my guest machine from only one interface, but not the other? Could a bad cable be causing the problems from SwitchB?

  Read the article

• What does opening a serial port do?

  - by reve_etrange

  What does opening the standard PC serial port do, in electrical terms (i.e. what voltages on which pins)? For example, the ancient VB6 program which controls an apparatus I am tasked with maintaining toggles .PortOpen to control some TTL. The connection only used 2 pins (bad solders fell apart), so which pins do I solder to? The only labels / documentation refer to pins 7 and 9, saying 0V and 5V parenthetically, but does .PortOpen really just put 5V between RI and RTS?. As a post script, this isn't the weirdest thing about the set up. The TTL I referred to above also connects to an instrument via a BNC to DB9 (!), with only 1 pin used. I guess there was an assumption about a common ground, since the BNC shielding isn't connected to the GND pin? The connection is to the instrument's 'foot pedal' pin, it was a way to remotely trigger the device. Update According to this page, the DTR and RTS pins can go high when the port is opened. If they were so configured, they will subsequently go low when the port is closed. If DTR and RTS are not enabled, opening the port should set both to low (and keep them low).

  Read the article

• Batch Script to Trim lines in text to first 30 or 50 characters only

  - by SuperUserMan

  I am now new to scripts but i find it really difficult understanding "for" command (especially with that tokens and delimiters etc) . Saying so, i think that for command can be used to do what i am doing. If its not and there is an easier way, ignore my ignorance :( Say i have multiple lines in a text file abc.txt with each line starting and ending with " (quotes) E.g. a file of 3 lines "hey what is going on @mike220. I am working on your car. Its engine is in very bad condition" "Because if you knew, you'd get shredded and do it with certainty" "@honey220 Do you know someone who has busted their ass on a diet only for results to come to a screeching halt after a few weeks" How can i trim each line, within the quotes, to a Fixed length say 30 or 50 or 100 characters (including spaces) I want to enter the number of character in batch and it can trim accordingly and produce a file def.txt with trimmed lines within quotes. Say i enter 50, results of above example should be "hey what is going on @mike220. I am working on you" "Because if you knew, you'd get shredded and do it" "@honey220 Do you know someone who has busted their" Thanks P.S. if you use For command, kindly please explain the command. EDIT: Though the answer provided worked, there is an issue with non english text. I am getting garbled text in Output file for non english text in input file . Any help @barlop here is the nonenglish text ( 1 line) "???? ?? ???? ?? ???? ???? ??? ?????? ???"

  Read the article

• Network Security Device/Software

  - by Campo

  We currently run Symantec Antivirus Corporate 10.2. The software is really easy to manage on a network but the actual virus detection isn't bad but the malware detection is crap. We recently were infected with a email bot that got us put on some block lists. This has been resolved. I cannot have that happen again. I would like to find a program as easy to manage as symantec that I can install on all the user's workstations as well as the servers. We run a windows 2003 domain. We have a couple 2008 test servers in the environment. Most of the workstations are xp though I am using windows 7 and symantect is not compatible with this OS... So we need a solution that would cover all those operating systems. If it could be installed on macs too that would be a bonus though not necessary at all. This software must detect: Viruses AND Malware I am looking for something that combines the features in anti-malware programs like malwarebytes or spybot with an antivirus program like symantec or AVG. Alternatively if there is a piece of hardware that is a firewall, router, and packet inspection for virus/spam that would be the most ideal solution. I then could supplement with a piece of software that could pickup what the hardware misses. Thank you for your suggestions.

  Read the article

• Nginx: Disallow index.html in URL

  - by Martin Vilcans

  We're generating a site consisting of only static files (using Assemble). Having the .html extension on URLs looks so nineties, so we generate every static HTML file in its own directory and call it index.html. For example, the url http://www.example.com/foo/bar/ is in the file /var/www/foo/bar/index.html. This works well, but there is one small thing nagging me: Now there are two possible URLs to the same resource: http://www.example.com/foo/bar/ (slash URL) http://www.example.com/foo/bar/index.html (index.html URL) By accident someone may link to the index.html form of the URL, which is bad for SEO and looks ugly (remember the nineties?). Is it possible in Nginx to give a 404 error on the index.html URL, but serve the slash URL? I tried this: location ~ /index\.html$ { return 404; } But it seems that Nginx does some internal rewrite of the slash URL to the index.html URL, and then matches this location so we get a 404 even on the slash URL. Note that to catch mistakes, we want index.html URLs to be an error, not just redirect to the slash URL.

  Read the article

• How to configure default text selection behavior in Windows XP, 7? (eg. mouse click selects entire word vs. mouse click inserts an active cursor)

  - by Mouse of Fury

  I find the mouse click behavior of Windows XP and Windows 7 annoying and intrusive. I don't remember Windows NT being quite this bad, or MacOS 7 - 10 which I used in the nineties. When I'm using a browser and I click on a text field - for example, the address bar, or a search box - the first thing which happens is the entire field is selected.Subsequent clicks seem to select parts of words, often deciding arbitrarily to exclude or include adjacent punctuation. The same in Excel and other apps, and when trying to rename files, so I'm assuming this behavior comes from a system-wide text handling routine. I frequently want to edit text, cut out or replace odd parts of the insides of words or chunks of sentences, and often find that to get a simple cursor to insert I have to click the mouse up to 4 times in succession. I've had to do a lot of this recently and it has been driving me insane. Is there a place at the system level where this can be configured? In a perfect world, I'd like a single click on a new text area to insert a cursor point, and a rapid double click to select the entire area. Words or text within the area could be selected by inserting a cursor, holding down the mouse button and dragging to the exact point where I want the selection to end - even if that's in the middle of a word. No, I don't need or want Windows to "smart select" a word or sentence for me. I've looked in the Mouse and Accessibility Options control panels (Windows XP). Haven't found anything even close. Thanks -

  Read the article

• Does Active Directory on Server 2003 R2 support IPv6 subnets in Sites and Services?

  - by NorbyTheGeek

  I've been experimenting with IPv6 at our organization. The domain controllers (all 2003 R2) and most of the servers (2003 R2 / 2008 / 2008 R2) have IPv6 configured. We have a subnet assigned through a tunnel provider. Currently, the only workstation that is running IPv6 is mine. (Windows 7) I have been noticing that my workstation is picking domain controllers in other sites for things like DFS, and I finally realized that I don't have the IPv6 subnets set up in Active Directory Sites and Services (ADSS). But when I try to add a IPv6 prefix in ADSS, it tells me: Windows cannot create the object 2001:xxxx:xxxx:xxxx::/64 because: The object name has bad syntax. I believe I may be using the 2008 version of the admin tools (ADSS reports version 6.1.7601.17514) so I'm wondering if maybe my 2003 R2 Active Directory schema doesn't support configuring IPv6 subnets in ADSS. Is this true? UPDATE Even with 2008 R2 schema in Active Directory, I'm having the same problem. How can I get my IPv6 subnets into Sites and Services?

  Read the article

• Liked Arch Linux - but I am still not sure if its the right distro for me...

  - by BlackAndGold

  As the title says... I used Arch Linux for a while and liked it a lot: leightweight, sleek, fast and well documented with a great community. However I had to format my hd and for the sake of being too lazy to reinstall arch, I used windows 7 exclusively for a while. Now I want to get back to linux again (still dual boot), mainly for web development purposes and using handy tools such as rsync ect. Again, I liked Arch, but there is too much tweeking, too much reading up and too much figuring out what to do as well es some bad suprises especially when you need them the least and when just quickly want to get some work done. I kind of would like to have a little more "out of the box" distro that is still fast and somewhat leighweight and of course reliable. I actually considered Ubuntu, which I am not too big of a fan of, but I will still give the minimal install a shot. However other distros seem interesting as well, such as crunchbang and mint debian ecpecially. My question, hoping this isn't too boring for many you, what is the right distro for me?

  Read the article

• How can I create a VLAN on my extreme switch for a seperate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• Very slow context menu in Windows 8

  - by burzum

  I've installed Windows 8 Pro on a blank new SSD, the system is on c:\. I do not think this problem was existent when I started using Windows 8 but I think it started to happen after I've symlinked (mklink /D) a folder from another drive, a SATA drive, to c:\xampp\htdocs. When I right click a file or folder inside the symlinked folder it always takes at least ~5-10 seconds until the context menu comes up. This also happens sometimes, but not all the time for files and folder outside of the symlinked folder. Also when I delete folders the delete folder dialog seems to get locked and does not continue. When I delete a folder using rmdir from the command line it works fine and pretty fast. It appears to me like the file explorer in Windows 8 is pretty bad compared to any other Windows I've used before? Any idea how to get these problems solved? I've already removed a lot of context menu entries; the only ones left are the tortoise git context menus but I'm sure that's not the problem.

  Read the article

• Win7 'locking' process/files/folders?

  - by Dynde

  I've had a fair bit problems with sometimes files/folders/processes being 'locked' by Windows. The weird thing is, it's not like the traditional sense, I think, where tools like UnlockIT and wholockme would work. It seems that just giving it a little often helps - making me think it could either be the HDD, the memory, or something in Windows. A scenario: I go into a folder - don't open anything at all, go back up, cut or drag-move the folder to someplace else, it says "Action can't be completed because the folder or a file in it is open in another program". Waiting sometimes 20 seconds sometimes a little longer, and I can move it. Another scenario is deleting a bunch of files in a folder, and it appears that everything is gone, but then suddenly after a few seconds an .exe file pops back up, and I can't delete it. Waiting a few minutes, then pressing refresh and it's gone. I have the strangest feeling that there's a problem with either HDD or memory. I already tried disabling Windows indexing service with no luck. Does anyone have any ideas? EDIT: I should say, that I have a very fast system, 16 GB DDR3 RAM, i7-2600k CPU, SSD main HDD, so I really should not be experiencing any sort of problems, where one might say that it's "reasonable" for the system not to respond right away. Edit2: And I updated SSD firmware a couple months ago, so it shouldn't be bad release FW either

  Read the article

• Parking domains and avoiding so called "search engine penalities"

  - by senthilkumar-c

  I have purchased two domains from one particular registrar and hosting from GoDaddy. Assume they are domain1.com and domain2.com Assume my hosting IP address is 111.111.111.111 I added both domain1.com and domain2.com in my domain management control panel and gave the same two nameservers for both domains at my registrar's control panel. So, now, both domains should show the same website. When I ping "domain1.com" or "domain2.com" the results say - Pinging domain1.com [111.111.111.111] with 32 bytes of data: Pinging domain2.com [111.111.111.111] with 32 bytes of data: respectively. So, they both point to the same hosting IP. BUT, internally, I have configured IIS to point them to different folders so that different websites are shown. (My hosting plan is expensive and I intend to use the space and bandwidth for many websites). But still, technically, all domains point to same IP address. Is this a bad thing? Is this what is called "domain parking"? I read some search engine forum posts that two domains pointing to the same IP/Website will be penalised by search engines and stuff. I have also read that simply "parking" the domains won't attract penality. I don't know whether what I have done is parking or the so called "wrong" thing. Can someone shed light on what I have done and what I should do? I don't want to be blacklisted by any search engine. P.S. I know this is not a search engine forum, but I am new to website hosting and domains and I am very weak in nearly all technical terms and concepts relating to web hosting and domains. I thought this will be a good place to understand these things.

  Read the article

• DVD-burner disappears when using grub

  - by drblah

  This is a rather annoying problem I have with Linux on my laptop. Whenever I install any Linux distro that relies on grub (which is about 99 % apparently) it will mess up my DVD-drive and the drive will not be recognized after booting, no matter the OS (Ubunntu, Arch, Windows Vista or 7). I know the problem has nothing to do the DVD-drive itself, because I bought a new one a few months ago. I am also sure that grub is messing the drive up, because I have tried to use LILO, which worked fine (except for horrible boot times.) This problem have persisted through about 3-4 years and it is a pretty bad show stopper whenever I want to work with Linux. I had hoped it would get fixed over time, but no one seems to have the exact problem I have. The drive is connected with an IDE connection. Update: The old drive was a Toshiba Samsung SN-S082. I don't know the model number of the new one, but it is HP (I think). Things I have tried to fix it: Mess about with some BIOS settings like enabling AHCI and change some IDE settings. Installing a different boot loader DOES fix the problem but I would like to use grub.

  Read the article

• Family server setup

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• Associate email account with "Personal Folders" Outlook data file?

  - by TheLQ

  In the process of migrating email servers I've run into an interesting problem: In Outlook 2007 you have the default "Personal Folders" item. This contains the email for the account that was origionally setup with Outlook. My issue is that I have deleted the account associated with that and created an entirely new account. So now I have "Personal Folders" and "[email protected]". However I can't delete "Personal Folders". nor associate "[email protected]" with that PST file. Deleteting it in Outlook (Tools Account Settings Data Files) gave the error "The default data file cannot be removed, because it is your default delivery location. After you have selected a different default delivery location, your current file can be removed." Deleting the PST file itself (outlook.pst) made outlook demand where its default file . would be. So I selected my "[email protected]" PST file and restarted Outlook. Now "Personal Folders" is called "[email protected]", but I still have a duplicate account called this. Which is bad. Worse, my email is associated with the duplicate PST, not the default. How can I associate my email with my default PST or delete the default PST entirely? Luckily I have backu

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >