Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 274/1213 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Problem with SANE and CardScan

  - by TiuTalk

  I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

  Read the article

• Ubuntu 14.04 Bluetooth Magic Mouse doesn't pair (No agent available)

  - by Rafael Xavier

  Mouse gets discovered. Although, it doesn't pair. /var/log/syslog: Apr 23 10:05:15 xavier bluetoothd[9873]: No agent available for request type 0 Apr 23 10:05:15 xavier bluetoothd[9873]: btd_event_request_pin: Operation not permitted Apr 23 10:05:15 xavier bluetoothd[9873]: Connection refused (111) It's worth saying that: Keyboard has paired and it's working just fine though; Mouse used to work just fine in Ubuntu 12.04, and 13, and it works when I reboot on Mac; This is the hci device. $ hcitool dev Devices: hci0 E0:F8:47:3A:3F:47 How to get it working?

  Read the article

• Monitor blinking

  - by Shark

  Hi I have Ubuntu 10.04, my laptop is ASUS k50ij, intel duo t3000, 2gb ram, 320 HDD, intel gma 4500M video card. My problem is that a couple days ago my monitor had start blinking for a few seconds. Then it stops and begins the same behaviour let's say in next 2 hours. What am i missing here? Another funny problem is that when i give more or less brightness to monitor the pop up window shows and giving "Power information: Laptop battery is charged". When my brightness is lower the blinking increases and vice versa. thx for help

  Read the article

• SDL Fullscreen and Gnome-panel

  - by Daniel

  On Ubuntu 10.10, the following SDL code cause Gnome-panel to cease updating its drawing, however it does still function (ie windows on the panel open where they should be, but you just have to know where they 'would be' on instinct/memory). Gnome-panel also leaves a "Untitled window" box in the panel. #include <SDL.h> int main() { SDL_Surface* Screen; if(SDL_Init(SDL_INIT_VIDEO) < 0) { return 1; } Screen = SDL_SetVideoMode(1280, 1024, 32, SDL_OPENGL | SDL_FULLSCREEN); SDL_FreeSurface(Screen); SDL_Quit(); return 0; } Is this something wrong with SDL? Something wrong with the code? Something wrong with Gnome-panel? Hopefully we can find out :) Note: SDL tag request? Seeing as it is quite popular when searched: http://askubuntu.com/search?q=SDL

  Read the article

• Presario r3000 hangs on boot to Ubuntu 12.04

  - by Chris

  I have a Compaq Presario r3000 laptop with Ubuntu 12.04 32 bit. 1.2GB RAM, with a nvidia Gforce 420 Go with 32MB RAM. It hangs on bootup about 3 out of 4 times at either the purple screen, or with a cursor in the upper left corner. Booting without a splash screen shows it hanging after attempting to initialize the floppy controller. Unity has never booted to 3D either, only 2D, with the additional drivers always failing to install. I searched all over this board and found similar issues, and tried everything there. Extensive vid driver install and uninstalls. Network issues that I've since resolved. I even found a very similar topic with a fix that didn't work. I'll probably try a clean install today (given how much I've probably messed up), and I would really appreciate any ideas. I'm fairly new to Ubuntu, so if you would like to see any error logs or configs, please walk me through exactly how to get and post them here. Thanks.

  Read the article

• How to recognize an optimus laptop?

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes kellogs@kellogs-K52Jc ~ $ lshw [...] *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:e080(size=8) Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ?

  Read the article

• Checksum Errors From Hard Disk

  - by Ademos

  After running GSmartControl, I received three checksum errors on my storage hard disk. Error in Attribute Data structure: checksum error Error in Attribute Thresholds structure: checksum error Error in ATA Error Log structure: checksum error Does this indicate a hard disk failure? Because, this is the THIRD TIME I have replaced the same hard disk. (after seeing this error) The hard disk is a Western Digital Caviar Green. (2 TB)

  Read the article

• Vostro 3560 Wireless on Ubuntu 12.10

  - by ngille

  I have been using Ubuntu 12.04.1 LTS on a Dell Vostro 3560 for some time now. At first I had issues with the wireless but I was pointed to a driver from Ubuntu 11.xx for a Broadcom BCM43142 and that did work! however with the upgrade to 12.10 I find myself at a lost because the driver will not work anymore. When trying to reinstall it I get "Driver of bad quality" I still install it but it just wont work. I cant seem to find anything on this issue for 12.10 and didn't know if anyone had any advice or if someone could point me in the right direction on resources to write my own driver for it. As I know C/C++ but have never written a driver for a Linux machine before. Thanks for any help! To be more clear I installed Ubuntu 12.10 Desktop on my Dell Vostro 3560 laptop. When I log in, my wireless card isn't visible in the Network Manager popup menu, although the wired network shows up there. I installed the driver mentioned below and that did help me on 12.04 but is now broken due to "Poor quality" a sudo lspci -nn command brings up: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07) **02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)**

  Read the article

• How can I transfer photo's from my Kodak camera that normally would use KODAK EASYSHARE Software?

  - by Ryan

  Normally I would plug my camera into my Windows XP pc, and the software would auto start, and transfer the files to a set location. I need to be able to perform the same or similar function on my PC installed with Ubuntu 10.04 (LTS). I would like to plug the camera in (USB), and then be able to select the files I want. At the moment, the camera does not seem to recognise the PC. I do not want to rely on the Windows PC anymore.

  Read the article

• How can I set access to mounted TrueCrypt volumes, and how can I dismount them on logout?

  - by d3vid

  I have TrueCrypt setup to mount volumes when I log into my work account. However, when I log out and log in to another account, those volumes are still mounted and available on the other account. How can I set access to those volumes? I don't want all users to be able to access them once they're mounted. (They mounted at /media/volumename - do I just set permissions on the folder "volumename" before mounting?) How can I tell TrueCrypt to dismount them when I log out?

  Read the article

• URL protocol handlers in basic Ubuntu Desktop

  - by Hibou57

  There was a way to register URL protocol handlers with Gconf, which is now obsolete and there seems to be no way to do the same with DConf (or Gsettings, its recommended wrapper). How do one properly register an URL protocol handlers since DConf? Additionally, something looks strange to me (as I don't understand it), on my Ubuntu 12.04 The protocol apt:// should be handled by the apturl command. It is so with my Opera browser, but only because I added this specific association using the browser's configuration facility. Otherwise, in the rest of the environment: Running xdg-open apt://foo.bar opens elinks (my www-browser alternative). Running gnome-open apt://foo.bar opens the Software?Center. Opening gcong-editor, I see a key /desktop/gnome/url-handlers/apt whose value is apturl "%s" and its enable. This configuration seems to be ignored, which is reasonably expected, as GConf is considered obsolete. Opening dconf-editor, I can't see anything related to URL handlers or protocols in /desktop/gnome It looks a bit messy to my eyes (just teasing with this wording, nothing bad) What's underneath? Side note: I'm looking for something which preferably works even when the full desktop environment is not loaded, like when running an i3wm session with only gsettings-daemon (and other stuffs unrelated to this case) is loaded. Update Another way to “register” a protocol handler is with *.desktop files and their MIME-Type; ex. MimeType=application/<the-protocol>;. I found a /usr/share/applications/ubuntu-software-center.desktop with this content: [Desktop Entry] Name=Ubuntu Software Center GenericName=Software Center Comment=Lets you choose from thousands of applications available for Ubuntu Exec=/usr/bin/software-center %u Icon=softwarecenter Terminal=false Type=Application Categories=PackageManager;GTK;System;Settings; MimeType=application/x-deb;application/x-debian-package;x-scheme-handler/apt; StartupNotify=true X-Ubuntu-Gettext-Domain=software-center Keywords=Sources;PPA;Install;Uninstall;Remove;Purchase;Catalogue;Store; This one explains why gnome-open apt://foo.bar opens the Software?Center instead of apturl. So I installed this apturl.desktop in ~/.local/share/applications: [Desktop Entry] Encoding=UTF-8 Version=1.0 Type=Application Terminal=false Exec=/usr/bin/apturl %u Name=APT-URL Comment=APT-URL handler Icon= Categories=Application;Network; MimeType=x-scheme-handler/apt; After update-desktop-database and even after rebooting, both xdg-open and gnome-open still do the same and ignore this user desktop file, which is usual, should override the other in /usr/share/applications/. May be there is something special with desktop files specifying x-scheme-handler MIME type and they are not handled the usual way. The desktop-file way does not answer the question.

  Read the article

• Ubuntu 12.04 VPN default route issue when using the UI

  - by Pieter Pabst

  When setting up a VPN connection using the UI (System settings = Network) the VPN connection is used as the default route after connecting to it. How can I avoid this? That is without assigning manual addresses. I want the connection to use DHCP. It should use the eth* interfaces for my default route, like they are used before making the connection. The VPN route should only be used when connecting to addresses in the ppp0 adapters range. If possible using the UI only, not that I'm not used to editing config files... But the point of using Ubuntu for me was the "it just works" concept (which is true for 99% of the time, keep up the good work). I tried setting the "Method" combobox in the "Configure..." dialogue to "Automatic (VPN) addresses only". That doesn't make a difference. (Another thing I noticed; the UI shows my connection as a "Wireless connection" in the list control on the left. Don't know why... it has the right icon, but that's probably something for the bug tracker)

  Read the article

• Why is apt-get --auto-remove not removing all dependencies?

  - by Mike

  I just installed a package (dansguardian in this case) and apt told me that I had unmet dependencies. # sudo apt-get install dansguardian Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: clamav clamav-base clamav-freshclam libclamav6 libtommath0 Suggested packages: clamav-docs squid libclamunrar6 The following NEW packages will be installed: clamav clamav-base clamav-freshclam dansguardian libclamav6 libtommath0 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/4,956 kB of archives. After this operation, 14.4 MB of additional disk space will be used. Do you want to continue [Y/n]? So I installed it and the dependencies. So far so good. Later on, I decide that this package just isn't the package for me, so I want to remove it and all of the other junk it installed with it since I'm not going to be needing any of it: # sudo apt-get remove --auto-remove --purge dansguardian Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: dansguardian 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 1,816 kB disk space will be freed. Do you want to continue [Y/n]? However it is only removing that one specific package. What about clamav clamav-base clamav-freshclam libclamav6 libtommath0? Not only did it not remove them, but clamav was actually running a daemon that loads every time the computer boots. I thought that --auto-remove would remove not only the packages, but also the dependencies that were installed with it. So basically, without going through the apt history log file (if I even remember to do so, or if I even remember that a specific package I installed 3 months ago had dependencies along with it), is there a way to remove a package and all of the other dependencies that were installed like in this case?

  Read the article

• How do I restore the original color scheme, icons, and theme?

  - by katya sehgal

  I'd like the original colour scheme, icon style of 12.04. I somehow lost the Ambiance theme (possible error or upgrade error). I re-installed 'light-themes' from the terminal and got it back. But the panel on the top that shows the options of sound, battery and wi-fi has changed and I can-not get the original setting back. In the windows, the close, minimize tools have shifted to the right instead of the original left side. I had installed MyUnity and Ubuntu Tweak but deleted them. As such, I want the original setting back. Kindly help me with the commands. I have searched for solutions; there are multiple and I need to be sure if I should follow the same. Kindly bear before marking duplicate. Discoveries: The appearance is gray and boxy as outlined here. Not sure same problem. Similar 'gray and boxy' article here. Desktop forgets theme. I have also tried the unity --reset command. It never completes. I gave it 20 minutes.

  Read the article

• "Page Size" and "Orientation" are disabled when printing from some applications

  - by Michael

  There are many different Print dialogs but one is very common and is used by Gimp, Shutter, Evloution and Simple Scan. In all these apps the "Page Size" and "Orientation" are disabled. The same dialog in Firefox, Thunderbird and GEdit works OK. I program in Gambas3 which uses this dialog in conjunction with the GTK+ library and it also has these options disabled. If I use the QT4 library then a different print dialog is displayed with no problems. Anybody else notice this problem and found a solution?

  Read the article

• How do I patch a kernel bug?

  - by Primož Kralj

  Sometimes I can't boot my laptop - it gets stuck here: Then I have to do a hard-reset and it's fine. I checked the boot logs and this is what I think it's causing it (nevermind the timestamp inconsistencies): [38.377595] BUG: unable to handle kernel NULL pointer dereference at (null) [38.377821] IP: [<ffffffffa01f6d7b>] r600_pcie_gart_tlb_flush+0xeb/0x110 [radeon] [38.378065] PGD 121491067 PUD 121492067 PMD 0 [38.378214] Oops: 0000 [#1] SMP Here is the full log. I found the patches but I have no idea about which to use and how.

  Read the article

• Why does my WIFI connection drop every 5-20 minutes?

  - by Benett Freeman

  There are other questions on this but none have been taken very far in their analysis. I get disconnects very often - sometimes every 20 mins or so, but sometimes even every few minutes. The way I have been getting around it is to disconnect from the Wifi connection and reconnect - and then it works fine again until the next disconnect. I am running 11.04 on an ASUS A52F. Can anyone help me please?

  Read the article

• my LaCie 500 Gb not mounted on 11.10

  - by pooo

  My external USB drive was recognized with 10.x versions of Ubuntu but since 11.x I am getting stuck, I had tried everything I read in forums but still the same error: 4956.401052] usb 2-1.4: new high speed USB device number 14 using ehci_hcd [ 4956.539216] scsi14 : uas [ 4956.740955] scsi 14:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 4963.256055] scsi 14:0:0:0: uas_eh_abort_handler tag 0 [ 4963.256076] scsi 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4963.256085] scsi 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4963.256091] scsi 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4963.328122] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4963.468743] scsi 14:0:0:0: Device offlined - not ready after error recovery [ 4963.468813] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.468831] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.469204] scsi 14:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 4963.512104] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 4994.253779] sd 14:0:0:0: uas_eh_abort_handler tag 0 [ 4994.253802] sd 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4994.253809] sd 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4994.253815] sd 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4994.325880] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4994.466488] sd 14:0:0:0: Device offlined - not ready after error recovery [ 4994.466555] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466573] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466582] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466588] sd 14:0:0:0: [sdc] READ CAPACITY failed [ 4994.466593] sd 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 4994.466600] sd 14:0:0:0: [sdc] Sense not available. [ 4994.466608] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466616] sd 14:0:0:0: [sdc] Write Protect is off [ 4994.466622] sd 14:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4994.466629] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466635] sd 14:0:0:0: [sdc] Asking for cache data failed [ 4994.466640] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 4994.467003] sd 14:0:0:0: [sdc] Attached SCSI disk if I am trying on an old ubuntu, the drive is mounted,

  Read the article

• front usb wont mount harddrives, internal usb ports do

  - by Thesgsuser

  I have noticed something in my new build, i am using Ubuntu desktop newest version my motherboard is the asus f1a75-m pro R2.0 with the usb ports in the back all my NTFS hard disks or usb sticks work fine, but then.. when i put them in the front usb ports of my chassis (silverstone milo ml-03) they wont mount... I have 2 usb 3.0 ports in front of the case connected with a internal usb 3.0 header. But i verified that the usb 3.0 ports on the back do mount the harddisk so it has nothing to do with usb 3.0 i think. The strange thing is, my mouse works fine on the front usb ports. Every usb hardware piece seems to work except if it has any memory inside it :( What seems to be the problem?

  Read the article

• Backup, clean install and restore

  - by Tony Martin

  Due to the route I came into Ubuntu I now have 12.10 upgraded from 12.04 on an NTFS file system. I've invested a lot of time getting everything as I want it, vis packages installed and settings, etc. I wonder if there is an easy method of: 1 Backing up the whole system so that I can; 2 Do a squeaky clean install of 12.10 on ext4 with bells and whistles then; 3 Restore my backup so that my system behaves as it did before the reinstall? Sorry if this seems terribly obvious, but I don't want to find all the problems when it's too late. TIA.

  Read the article

• What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS?

  - by Stephen Myall

  I am planning on doing a fresh install of 12.04 LTS next weekend (I am currently on Beta) and want to know what is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? I have been reviewing all the Q&A on AU and the reason for asking this specific question is that I maybe be missing some dependencies from my planned coding. In a previous AU question relating to 11.10 (here) NOT 12.04 the accepted response stated that this was a dependency. sudo apt-get install ia32-libs I was also receiving conflicting advice on other websites which put doubts on what the correct approach was.

  Read the article

• How to convert image to CMYK in GIMP?

  - by edm

  I am supposed to send some artwork to the printers tomorrow and their guidelines requires it to be CMYK. I have installed the plugin Separate+ from the 'gimp-plugin-registy' package. I have also installed some ICC colour profiles from the 'icc-profiles' package. When I try to use the Separate+ plugin all I can get it to output is an image that looks like the original but with the colours inverted. How can I convert my image to CMYK?

  Read the article

• Files lost after reboot in Windows

  - by Vikram

  Hi, I have a dual boot OS(Ubuntu 10.10 and Windows 7) in my laptop. I recently copied some important files from a pen drive to one of my NTFS drives from Ubuntu. After copying i was able to view the files in the directory and hence i formatted the pen drive. The problem occurred when i rebooted the system in Windows, i could not find any of the files or the folders i copied in the drive. I again rebooted into Ubuntu and could not find it there also. What is the reason my files got deleted? Is there any way to recover them? Note : For your information my Windows was in hibernation state when i was copying the files in Ubuntu. Will this affect the files in any manner?

  Read the article

• Change resolution in Waking Mars

  - by Wes

  I purchased and installed the humble bundle game "Waking Mars" via the Ubuntu Software Center and it works really well except for some issues with changing settings, namely with the resolution. The in-game settings for changing resolution and entering/exiting fullscreen were easy enough to find and toggle, and when you do it asks to restart the application. When you restart it, all other settings you updated are reflected except for the changes to the resolution. (I'm trying to get it to play in windowed mode that fits onto one monitor, but it will only default to windowed mode with the full dual monitor resolution). I noticed that it writes these values to ~/.local/share/WakingMars/UserSettings.ini. When I change the resolution, it is properly written to in this settings file...but it never is reflected when you restart the application. Any ideas what's wrong?

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >