Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 276/1213 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• DVDs and CDs not recognized

  - by Larry Doyle

  I have Ubuntu 12.04 LTS installed on my computer (Sony Vaio VGN-NS205N). It reads some CDs and DVDs just fine, but many others it will not recognize at all, or will only recognize after opening and closing the CD tray many times. It just shows the cd/dvd drive as being empty and won't show that anything is on there at all. I have a few DVDs (from the same publisher) that work every time. This comes up most often when trying to show my kid Bob the Builder, etc. Some data CDs I would like to work with also have the same issue. It's not a hardware or defective disc problem, since all these will play in Windows on the same machine. It's just really annoying to have to switch operating systems to play videos or get data off discs. All the searches I have done people recommend installing medibuntu and other repositories. I have and they are all up to date. No change. Any help that works would be greatly appreciated.

  Read the article

• There is no driver for Ralink chip 5360

  - by Dmitrix

  I bought DWA-525 and it does not work Google did not help. No one on the Internet could not get the device to work =( lspci 01:06.0 Network controller: Ralink corp. Device 5360 I do not know what to do uname -a Linux pc 3.0.0-19-generic #33-Ubuntu SMP Thu Apr 19 19:05:57 UTC 2012 i686 athlon i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" I am sure that the problem is DWA-525 and chip 5360. I found many similar problems on the Internet without solving =(

  Read the article

• Can't open Software Center or Update Manager

  - by Albert

  When I try to (not from terminal) the following error message opens up: An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Malformed line 60 in source list /etc/apt/sources.list (dist parse)' Using Ubuntu 12.04, thanks. Edit: Went to line 60, this is what I found: deb http://archive.canonical.com/precise partner

  Read the article

• Mouse takes a while to start working after boot

  - by warkior

  I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

  Read the article

• Alternate CD image downloaded last year gives different hash

  - by Oxwivi

  I had downloaded the alternate CD images through torrents some time last year, and now that I need it again I decided to check it's md5 hash. $ md5sum ubuntu-11.10-alternate-i386.iso b502888194367acdec4d79203e7a539c ubuntu-11.10-alternate-i386.iso Now the problem is, the reference hashes it's supposed to match to is completely different: 24da873c870d6a3dbfc17390dda52eb8 ubuntu-11.10-alternate-i386.iso Can I safely conclude the image I downloaded is corrupted? Reference UbuntuHashes - Community Ubuntu Documentation

  Read the article

• System boots in console + login loop

  - by Imagicien

  I messed up my system while trying to fix permission problems for setting up a LAMP local server. I tried this solution: How to avoid using sudo when working in /var/www? without success. Then I saw this solution: Permissions issue: how can Apache access files in my Home directory? I understood that I had to change the permissions of my root directory (among others), so I executed: sudo chmod 710 / I also changed the user group on / to www-data. I also did these operations on /home. I'm pretty sure one of those commands broke something, because it's the last commands I executed, and after that, my system showed strange/broken behavior: Firefox stopped showing pages Some icons got replaced by an red X icon (meaning "Icon not found" I guess) Applications refused to launch (no reaction) After rebooting: I got a strange graphical message talking about not being able to mount something, asking me if I wanted to wait, and talking about /tmp (I forgot the message since I was in shock) My system now boots in console, and when I login, it flashes unsignificant stuff* before re-asking me to login. My important data is on Ubuntu One. I'd prefer not having to reinstall from scratch. Is there a way to regain access to my system? Thanks a lot for your help. *Looks like a terminal header with the name of the OS and other info. Doesn't seem important.

  Read the article

• Unable to install VMWare Workstation v8

  - by pst007x

  Installing VMware 8.0.2 64bit Ubuntu 12.04LTS 64bit BETA My Kernel version is: 3.2.0-20-generic pst007x@pst007x-Aspire-5741:~$ sudo sh VMware-Workstation-Full-8.0.2- 591240.x86_64.bundle Installs ok When I launch I am asked to install modules which are compiled and loaded into the running kernel. A window opens VMware Kernel Module Updater This fails on Virtual Network Device ERROR LOG. UPDATE: PATCH. When I try to add patch, following error: pst007x@pst007x-Aspire-5741:~$ sudo sh patch-modules_3.2.0.sh [sudo] password for pst007x: patch-modules_3.2.0.sh: 27: [: workstation8.0.2: unexpected operator patch-modules_3.2.0.sh: 28: [: workstation8.0.2: unexpected operator Sorry, this script is only for VMWare WorkStation 8.0.2 or VMWare Player 4.0.2. Exiting pst007x@pst007x-Aspire-5741:~$ I have fully un-installed, and re-installed. I am installing the correct version. Probably a problem with the patch. VMware installs perfectly on Ubuntu 11.10 This is how I uninstalled.

  Read the article

• bluetooth daemon not running at startup

  - by ffaxer

  I'm trying to connect a bluetooth mouse to my Xubuntu system using Blueman (v. 1.21) Problem seems to be bluetoothd not running at startup, so blueman refuses to start, only a dialog appears: "Bluez daemon is not running, blueman-manager cannot continue." On my system, bluetoothd will run only as root (sudo), so my current workaround is simply to sudo bluetoothd manually, which works fine but id like to have it run at startup so that my mouse is just working without any interaction from me, if possible. If i try to start bluetoothd as non-root it reports: Bluetooth deamon 4.91 Unable to get on D-Bus In the startup scripts i found the same bluetoothd script in all runlevels and init.d: DAEMON=/usr/sbin/bluetoothd test -f /usr/sbin/bluetoothd || exit 0 # bluetoothd normally starts up by udev rules. it needs dbus to function, log_progress_msg "bluetoothd" pkill -TERM bluetoothd || true log_progress_msg "bluetoothd" I looked in /etc/udev/rules.d/ but no reference to bluetoothd. Further i have already tried with no luck: Editing /etc/dbus-1/system.d/bluetooth.conf to include my user (essentially copying the part that was for root): I tried it while both keeping the root policy and without, still, no luck! Editing /etc/pam.d/common-session and /etc/pam.d/gdm to include the line: session optional pam_ck_connector.so In the case of common-session it was already there but with a "nox11" which i tried removing. No luck no luck. Btw, I'm confused as to which session manager I'm using, since i have both xfce4-session and gdm-session-worker running. Anyways, hope someone is savvy enough to figure it out or bring some hints, otherwise i sincerely apologize for wasting your time! I'll sign off with uname -a: Linux [mycompname] 3.0.0-9-lowlatency #12ppa1~natty1-Ubuntu SMP PREEMPT Mon Aug 22 06:52:15 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux Peace B)

  Read the article

• USB Flash Drive not Detected on 12.10 x64

  - by Falguni Roy

  My Mediatek usb flash drive is not get detected. The o/p of lsusb falguni@falguni-M61PME-S2P:~$ lsusb Bus 002 Device 002: ID 0e8d:0003 MediaTek Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub and the o/p of usb-devices falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub But in 12.04, the o/p of usb-devices was: falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0003 Rev=02.00 S: Manufacturer=MediaTek Inc S: Product=MT6235 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm It was working fine in 12.04. Now after upgrading to 12.10 the problem started. Where is the problem and how to solve it?

  Read the article

• How to detect image dimensions and run commands on them?

  - by Jon

  I have a directory full of images, some of which are portrait-sized instead of landscape-sized, and I want to open the portrait-sized ones with an image editor. I can run the imagemagick command identify and I get an output like something.jpg JPEG 1920x1255 1920x1255+0+0 8-bit DirectClass 159KB 0.000u 0:00.000. How can I have a script interpret this output, i.e. decide which is bigger, the 1920 or the 1255, and then run a command on it if it is?

  Read the article

• Tripple boot install with Windows MBR

  - by Andre Doria

  I have 2 hard drives, each 1TB. First drive has only Windows 7. The second drive has Kali installed on logical partitions #5 (/boot), #6 (/), #7 (/home), and #8 (swap). The bootloader is installed in /dev/sdb5. It also has Ubuntu installed on logical partitions #9 (/boot), #10 (/), #11 (/home), and #12 (swap). I want to use Windows bootloader, so I use easyBCD to configure the boot menu. EasyBCD sees my second drive partitions as #1, #2, #3,..., #8. I then add Kali selecting second drive #1 (/boot) partition, and Ubuntu selecting its #5 (/boot) partition. After this my menu has choices of Windows 7 (default), Kali, and Ubuntu. The problem is that whether I select Kali or Ubuntu I always boot Kali! Any idea on how to enable Ubuntu boot while also keep using Windows bootloader in MBR?

  Read the article

• How to import Evolution application data from home folder backup

  - by Wolter Hellmund

  I had many folders and filters and mail in general in Evolution on my previous Ubuntu install, which I thought would be available for me for I had backed up my home directory. I have copied now Evolution related folders to my new home directory, and Evolution is not showing either the folders I had or any of the filters. To be more precise, I have copied the mail folder to ~/.config/evolution/ but that hasn't changed anything, as I said.

  Read the article

• Faulty memtest result

  - by dhojgaard

  I've been a bit suspicious about my RAM lately. They seem not work like i expect them to. For instance i run a lot of Virtual Test Environments in VMware Workstation and lately Ubuntu starts to lag just running 4 virtual machines each dedicated 512 MB. BTW im having 6GB memory on my laptop. This did not use to be a problem for me on my last laptop that even had a lot lower CPU resources. So i was led to try a memtest after reading some websites about RAM testing. So i did a memtest overnight but when i woke up this morning i was just looping and i could not Exit or do anything. It was just looping the number of errors besides test 7 which you can see in the lower right part of the screenshot. Can anyone interpret this screenshot for me? Do i have a faulty set of RAMs?

  Read the article

• Update Manager won't open (error related to pythonverbose)

  - by Mateus Machado Luna

  I'm having an issue with update-manager. Last night, my computer restart suddenly during the update process. Now it won't open and it keep appearing on the notifier with a message warning that an error occurred. The error is the same that is displayed when I try to open it on the terminal: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/bin/update-manager", line 26, in <module> from __future__ import print_function EOFError: EOF read where not expected I've already seen some questions here, but most of them are related to problems with ppas and the source.list file. This seems to be a bug on update-manager itself. I've already tried to remove it and install again, but the problem persists. I also noted another bug: my source-center doesn't open too. The message for it is similar to the other one: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/lib/command-not-found", line 5, in <module> from __future__ import absolute_import, print_function EOFError: EOF read where not expected For now I'm using apt-get update && upgrade for updating and the Synaptic for the source management. But I really would like to fix this stuff. Anyone can help? I'm with Ubuntu 12.10, Gnome-remix, 64-bits.

  Read the article

• Switching between ethernet interfaces on Ubuntu 10.04 SERVER

  - by Chaitanya

  I have ubuntu 10.04 "SERVER" installed on a system with two ehternet ports. I use only one at a time. I wanted to know if I can switch between ports without using ifup and ifdown every time. That means when I connect my Lan cable on eth0 it should work and it does. But when I disconnect the lan cable and connect it on eth1 I have to ifdown eth0 and only then it works. In my /etc/network/interfaces file I have configured both eth0 and eth1. there is no problem other than I have to switch it manually with ifdown and ifup everytime. Please guide. Thanks in advance

  Read the article

• Problem in Loading certain Websites in Ubuntu 11.10

  - by Cody

  I have a DSL connection in Ubuntu 11.04 and am having problems loading content from certain websites mostly providing CDN services. I have tried every suggestion asked at problem loading internet pages as I have the same problem. Also tried to remove the DNS Cache and Browser Cache. I have tried using Google DNS Server: 8.8.8.8 and 8.8.4.4, but nothing seems to work. Though when I browse the websites in Windows XP then it does not pose any problem. This problem has come up only few days ago and has affected every browser(Chrome, Firefox and Opera) in Ubuntu 11.04. Thanks in advance.

  Read the article

• Dependency errors on installing Banshee

  - by Ben Cracknell

  I just installed Ubuntu 12.10 (Verified the ISO hash as well). The VERY first thing I did was open the software centre and try to install banshee. I am met with the following error: The following packages have unmet dependencies: banshee: Depends: libc6 (>= 2.7) but 2.15-0ubuntu20 is to be installed Depends: libglib2.0-0 (>= 2.34.1) but 2.34.0-1ubuntu1 is to be installed Depends: libgtk2.0-0 (>= 2.24.0) but 2.24.13-0ubuntu2 is to be installed Depends: libsoup-gnome2.4-1 (>= 2.27.4) but 2.40.0-0ubuntu1 is to be installed Depends: libsoup2.4-1 (>= 2.26.1) but 2.40.0-0ubuntu1 is to be installed Depends: libx11-6 (>= 2:1.4.99.1) but 2:1.5.0-1 is to be installed Depends: mono-runtime (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libc0.1 (>= 2.15) but it is not going to be installed Depends: libgconf2.0-cil (>= 2.24.0) but 2.24.2-2 is to be installed Depends: libgdk-pixbuf2.0-0 (>= 2.26.4) but 2.26.4-0ubuntu1 is to be installed Depends: libglib2.0-cil (>= 2.12.10-1ubuntu1) but 2.12.10-4 is to be installed Depends: libgtk2.0-cil (>= 2.12.10-1ubuntu1) but 2.12.10-4 is to be installed Depends: libmono-cairo4.0-cil (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-corlib4.0-cil (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-posix4.0-cil (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-system-core4.0-cil (>= 2.10.3) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-system4.0-cil (>= 2.10.7) but 2.10.8.1-5ubuntu1 is to be installed Depends: gnome-icon-theme (>= 2.16) but 3.6.0-0ubuntu2 is to be installed I should note that the banshee application appears three times when searching for it: http://i.imgur.com/fJOsb.png Other applications install fine though. I installed the latest updates and still received the same error. I even tried reinstalling Ubuntu, but the same thing happened.

  Read the article

• How do I format the output of nmap to display on conky?

  - by WolfLarson

  I want to add to the network section of conky a list of all hosts and ips for my network. However I do not know how to format the output in a way I like. I want Live Hosts However this is on the bottom line of nmap's output) host (ip) host (ip) and on and on... I think there should be a max of 7 on my network. How can I do this? The output of nmap -sP 192.168.1.0/24 looks nothing like what I want though it does have all the parts, just in the wrong order.

  Read the article

• Sarg Daily Report not generated

  - by Suleman

  Ubuntu 12.04 LTS Squid 3 Sarg 2.3.2 following is my crontab configuration # SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin m h dom mon dow user command 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # this does not generate daily html report.

  Read the article

• bashrc script not accepting space in directory name

  - by faizal

  I have added a variable at the end of my ~/.basrc file : export xyz = /home/faizal/DEV/ADT workspace/xyz But if i open a new terminal, i get the error : bash: export: 'workspace/xyz': not a valid identifier So i try a variety of alternatives : export xyz=/home/faizal/DEV/ADT\ workspace/xyz export xyz="/home/faizal/DEV/ADT workspace/xyz" export xyz="/home/faizal/DEV/ADT\ workspace/xyz" export xyz='/home/faizal/DEV/ADT workspace/xyz' export xyz='/home/faizal/DEV/ADT\ workspace/xyz' They all give me the error when i try cd $xyz: bash: cd: /home/faizal/DEV/ADT: No such file or directory What am i doing wrong?

  Read the article

• Installing gdm on headless Server Edition

  - by Andrew Koester

  I have Ubuntu Server running on a headless box, which is right now, almost entirely doing only software RAID and feels a little underused. I'd like to get into using Ubuntu as a desktop a little more. What do I need to do (install/etc.) to get Gnome while keeping the box itself headless? I'm not sure which packages to install or which steps to take. I figure I'll just use X over the network (Xming or the like) but something like NX might work.

  Read the article

• Is it possible to use Python with the Ubuntu SDK?

  - by Zignd

  David Planella wrote in his answer to a question I posted that: ...the recommended way to develop apps for Ubuntu is the Ubuntu SDK. So I installed it, but looks like the supported programming language is C++. Does it mean I will need to know C++ to develop a new application for Ubuntu? Is C++ the recommended programming language for Ubuntu application now? What about Python, I started learning it hoping to develop applications for Ubuntu.

  Read the article

• hplip tries to print from photo tray

  - by James Bradbury

  I have hplip-3.14.4 with an HP Photosmart b210a and recently it has stopped printing properly. The issue is that it tries to print from the photo tray (which we don't use). I've tried setting this manually via the Settings page, but it makes no difference. My wife has the same issue (also using Ubuntu 12.04). EDIT: I've just set the printer up in Windows 7 and it works. So this is not a hardware fault and likely due to hplip or some Ubuntu software issue. Rolling back the driver to 3.13.8 does not make any difference. What else can I try

  Read the article

• Cannot get debconf version after delete /var/lib/dpkg

  - by pije76

  As a new ubuntu user, I just make a mistaken. I've deleted a folder /var/lib/dpkg/ instead of /var/lib/dpkg/lock :) Now when I execute apt-get -f install then it will display error message: ... E: Cannot get debconf version. Is debconf installed? debconf: apt-extracttemplates failed: No such file or directory ... I've try this tutorial: http://people.adams.edu/~cdmiller/posts/Ubuntu-dpkg-recovery/ but still no luck. How can I fix this issue?

  Read the article

• Flash Webcam non responsive

  - by powerbuoy

  I've got the same problem as this gentleman: https://answers.launchpad.net/ubuntu/+source/flashplugin-nonfree/+question/176541 Where the webcam settings / access does not work at all / is completely unresponsive in Ubuntu 11.10. I've tried webcam access in Facebook, Google+, my own code + a number of tutorials/demos and none work. What happens is the settings dialogue is completely unresponsive. Clicking tabs or buttons does nothing. In the question linked to a suggested answer is to run Unity 2D. Unfortunately this does not work for me (the exact same thing happens). I've also tried Gnome 3 which also does not work. Note that it is only the webcam settings that don't work. YouTube videos and annoying banners work just fine. Does anyone know of a workaround for this (except going back to 11.04) or if they've fixed this in 12.04? - also, are any of you experiencing the same thing?

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >