Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 284/607 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

• How to unlock and remove a protected partition from Prestigio USB stick?

  - by mr.b

  Ok, so, I have one of those fancy schmancy devices, which is given to me by a frustrated friend of mine. Device is a Prestigio Leather 8GB, which identifies itself to Linux host as: Bus 001 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Kernel messages as USB device is plugged in: kernel: [ 2769.580042] usb 1-9: new high speed USB device using ehci_hcd and address 7 kernel: [ 2769.714782] scsi8 : usb-storage 1-9:1.0 kernel: [ 2770.713937] scsi 8:0:0:0: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.714535] scsi 8:0:0:1: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.715734] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 2770.716108] sd 8:0:0:1: Attached scsi generic sg4 type 0 kernel: [ 2770.722175] sd 8:0:0:0: [sdc] 962560 512-byte logical blocks: (492 MB/470 MiB) kernel: [ 2770.722657] sd 8:0:0:0: [sdc] Write Protect is on kernel: [ 2770.731078] sd 8:0:0:1: [sdd] 14012416 512-byte logical blocks: (7.17 GB/6.68 GiB) kernel: [ 2770.731215] sdc: kernel: [ 2770.738251] sd 8:0:0:1: [sdd] Write Protect is off kernel: [ 2770.880328] kernel: [ 2770.885876] sd 8:0:0:0: [sdc] Attached SCSI removable disk kernel: [ 2770.887442] sdd: unknown partition table kernel: [ 2771.049605] sd 8:0:0:1: [sdd] Attached SCSI removable disk So, symptoms are typical for U3-like devices: two separate devices inside of a single flash device. Windows sees it also as two identical usb devices, and mounts two separate drives to system, whereas first one presents itself as a CDROM device, holding a write-protected content, and second is a regular flash-disk partition, that "can" be written to. However, it seems like it's broken in some weird way, since it won't let me write anything to it, format it, nothing, but that's not the issue right now. Question: How can I unlock entire USB stick so it appears to system as a single, 8GB device which can be partitioned and used normally, without restrictions? Since it appeared to be an U3 device, I have tried standard utilities: both U3 Uninstaller by u3.com (found on SoftPedia), and opensource u3_tool from sourceforge (on both Windows and Linux). First utility failed to even detect USB stick as U3 device (simply stood idle while I re-plugged stick several times), while second tool failed with some obscure error about SCSI command unable to do something (I might be able to provide exact errors when I switch back to windows). u3_tool -i /dev/sg3 (Display device info) fails with u3_partition_info() failed: Device reported command failed: status 1 ...and every other option fails with same error, minus first part which states which command precisely has failed. So, apparently, this isn't a U3 device. Or, if it is, it doesn't behave like one. I read on a few occasions that this device protection is done by special command sent to device which tells it to lock itself, and so there should be an unlock command, that would set drive straight. Does anyone have any idea about what could I do to this device to fix it? P.S. I also mentioned a problem with being unable to use second "drive", but I'll tackle that problem when (and if) I manage to merge those two devices into one...

  Read the article

• Recover from a recover partition when F11 doesn't work and windows is corrupt

  - by jherlitz

  I have someones presario V3000 laptop. It has a D drive which is the recovery partition. The user brought it to me and windows would no longer even boot up. I could only reload XP and try to find a way to recover from the recovery partition. However haven't been able to. I read, hold F11 down when booting up, but that didn't do anything, and the other item I read is to create the CDs from the software installed in the OS from the factory. Well that is the OS that went corrupt and is no longer there. A new reloaded version of XP is there now. Is there still a way I can either create recover CD's/DVD's or boot from the recovery partition?

  Read the article

• Restoring the exact state of a linux install to a different laptop with different sized drives and other hardware

  - by user259774

  I have an IBM running a Manjaro install that has already been used and settled into, with packages installed, browser profiles, etc, etc. The drive is 60gb, and it has a swap partition and an ext4 root partition. I need to move this profile to a Toshiba computer with a 320gb drive. How should I go about this? My inclination would be to shut down the toshiba, boot a live linux system, dd the whole 60gb drive to a file, boot the toshiba to a live system, then dd the file to its 320gb drive. Would this work? I know that it wouldn't with windows, but I believe this is an artificially imposed limitation from Microsoft. Is this correct, or is Linux similarly limited? If not, how could I go about this? Would clonezilla work, or would the hardware disparities prevent it from working?

  Read the article

• Which is faster for read access on EC2; local drive or EBS?

  - by Phillip Oldham

  Which is faster for read access on an EC2 instance; the "local" drive or an attached EBS volume? I have some data that needs to be persisted so have placed this on an EBS volume. I'm using OpenSolaris, so this volume has been attached as a ZFS pool. However, I have a large chunk of EC2 disk space that's going to go unused, so I'm considering re-purposing this as a ZFS cache volume but I don't want to do this if the disk access is going to be slower than that of the EBS volume as it would potentially have a detrimental effect.

  Read the article

• Windows Server 2008 hangs up while booting

  - by Jim R

  Windows Server 2008 hangs up while booting after Windows update applied several updates. The server is a virtual instance on a Server 2008 Hyper-V host. Other virtual servers are fine, but have not been updated. The normal boot shows the horizontal barber poll forever. When I do a safe boot it also hangs up. With a "Please Wait..." after loading many '.sys' files. The last successfully loaded file listed is: '\Windows\system32\drivers\crcdisk.sys' That is the extent of what I have been able to determine.

  Read the article

• WD My Passport detected but not assigned a drive letter

  - by abel

  I have a WD My Passport external drive which used to work fine on my Win7 x64 box until recently. Since the past few days, windows would not detect my external drive. However, Storage under disk management lists my external drive(which means windows can see my drive) but without a drive letter. I am not able to assign a drive letter(the option is grayed out). I installed EASUS Partition Manager which allows me to assign a drive letter, but fails to do so when I apply to save changes. What do i do to assign a drive letter to the drive or make windows to detect it as of old? The external drive works well on Win7 x32(dual boot, same system) and win7 x64 on another box. Update: cant comment from Opera Mini 6 @zeke the drive works absolutely fine on other Win7 boxes and on the dual boot win7 on the same system.

  Read the article

• 3 TB HDD won't reactivate

  - by isif

  After doing a clean install of Windows 8 my Seagate 3 TB HDD won't reactivate in Disk Management. The two volumes are there but I can't use them for some reason. The drive was previously used with a GPT partition table, I can see the two spanned volumes but can't reactivate either. I backed up all my files from Windows 7 onto that drive and desperately need them back. What can and should I do to get the drive back up and running? When I go to Disk → Properties → Volumes, it claims the drive has a MBR partition style, so converting to GPT somehow without data loss should work. gDisk claims to be able to do that but when I point it to the drive, it claims that it has a GPT partition and a protected MBR partition. Any suggestions on what to do?

  Read the article

• Memory cache Ubuntu 9.10 server x86 doesn't work as expected

  - by Matthijs

  We're using an Ubuntu 9.10 server to transfer Ghost-image files. We configured it only with Samba. And the DOS-clients connect to Samba. The latest updates are installed and so far the servers is running fine. When we image 10 pc's with the same image of 2 files of 2GB there's no disk activity. Everything is loaded in the RAM. There's 4GB in the server. But when we use 2 pc's with 2 different image files of 500 MB (8x) files then there's a lot of continuous disk activity. The speed is lower. So it seems that Ubuntu doesn't cache more then one big file. Are there settings to change this behaviour?

  Read the article

• Exchange 2007 Standard Edition

  - by Phrontiste

  We Have : Exchange 2007 Standard Edition IBM System X3650 2 x Intel Xeon 5430 2.66 GHz Version 8.1 Build 240.6 Mailbox, Hub Transport, Client Access Role Installed on One Box Total Number of Mailboxes : 110 - 130 6 Physical Disks Disk 0,1 (68 GB) = Raid-1, OS Partition ( C: Partition) Disk 2,3 (279GB) = Raid-1, Exchange Database (First and Second Storage Groups) ( D: Partition ) Disk 4,5 (68 GB) = Raid-1, Exchange Transaction Logs ( E: Partition ) Setup: Storage Groups : D:\First Storage group\Mailbox database.edb Storage Groups : D:\Second Storage Group\Public Folder Database.edb Transaction Logs : E Partition Problem 1: On our D Partition (Mailbox Database Partition), total size is 279 GB, free space remaining is 64.7 GB, when I select the first storage group and second storage group folders and right click properties they report a size of 165 GB. Mailbox database reports a size of 157GB when right clicked Properties. where as the size displayed in the folder is 164,893,456 KB So, we are missing around 50-54 GB, there is nothing else on these drives, no page file, nothing at all. The partition housing the Transaction logs is reporting the sizes accurately. Any suggestions / fixes on the above ? Problem 2: As you may have already read in Problem 1, the size of the mailbox database is 157GB or 164GB reported; which is not recommended, a) What would you suggest we should do to divide mailboxes in storage groups on this same server ? b) How would we move mailboxes into different storage groups ? c) This is the information store size ? (Am I right in thinking that this is not recommended) d) Having multiple storage groups with one Mailbox DB in each, would that reduce the size of the Information Store? e) Any suggestions / how-to reduce the size of information store ? We didn't install this, we have inherited this - what other recommendations you can make in order to keep ourselves better prepared for any server disaster? We are backing up with Yosemite Backup on RD1000 (320GB) at the moment, which is backing up successfully, flushing the logs daily. We haven't done a test restore YET. I have tried to provide as much info as possible, please let me know if you need further info. Also, we haven't yet faced any problems in mailflow, access speeds, everything is working fine, we have two to five people accessing OWA or Outlook via vpn only. Thanks for your time to read the above - will look forward to your expert suggestions.

  Read the article

• Disable Acer eRecovery system

  - by Joel Coehoorn

  The meat of this question is that I'm looking for a way to either require a password before using a recovery partition or "break" the recovery partition (specifically, Acer eRecovery) in a way that I can later "unbreak" only by booting normally into windows first. Here's the full details: I have a set of new Acer Veriton n260g machines in a computer lab. A lot work went into setting up this lab to work well - for example, Office 2007 and other programs needed by the students were installed, all windows updates are applied, and a default desktop is setup. All in all it's several hours work to fully set up one machine. Unfortunately, I don't currently have the ability to easily image these machines, and even if I did I would want to avoid downtime even while an image is restored. Therefore, I've taken steps to lock them down — namely DeepFreeze and a bios password to prevent booting from anywhere but the frozen hard drive. DeepFreeze is an amazing product — as long as you boot from the frozen hard drive, there is no way to actually make permanent changes to that hard drive. Anything you do is wiped after the machine restarts. It lets me give students the leeway to do what they want on lab computers without worrying about them breaking something. The problem is that even with the bios locked and set to only boot from the hard drive, these Acers still have a simple way to choose a different boot source: shut them down and put a paper click in a little hole at the top while you turn it on again. This puts them into the "Acer eRecovery" mode. This by itself is no big deal — you can still power cycle with no impact. But if you then click through the menu to reset the machine (we're now past the point of curiosity and on to intent) it will wipe the hard drive and restore it to the original state. Of course, a few students have already figured this out and reset a couple machines. That's unfortunate, but inevitable. I don't want to destroy the ability to do this entirely (which I could by repartitioning the drives to remove the recovery partition) but I would like a way to require a password first, or "break" the recovery system in a way that I can "unbreak" only if I first un-freeze the hard drive in DeepFreeze. Any ideas?

  Read the article

• How to avoid Memory "Hard Fault/sec"

  - by Flavio Oliveira

  i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

  Read the article

• Alternative to Windows Home Server (WHS) backups

  - by Adam Tegen

  Since Microsoft announced the end of life for WHS, are there any alternatives? Specifically, I am interested in recovering from a catastrophic disk failure with WHS. For example, this is my ideal scenario when a desktop hard-drive fails (has a bad virus, etc): Install a disk of the same size or greater Boot the desktop with the Recovery Disc Point the recovery application at the WHS Pick the machine, the drive(s) and the date of the backup Have a couple beers Reboot to a working machine as if nothing happened. I would need to slap multiple disks in the machine without raid. It sounds like LVM will work here. It would be nice, but not required to have de-duplication of files when multiple machines are backed up. (Single Instance Storage)

  Read the article

• Linux server apache httpd processes take i/o wait to close to 100% and lock down server

  - by user3682065

  For about 5 days now, and seemingly out of the blue, my linux server has started locking up from time to time. The pattern is always the same as far as I can tell from top and iotop commands around the time it starts happening: One or more httpd processes (usually one) hang and start using up 100% of CPU power, the %wa goes close to 100% and in the iotop I see several httpd processes with 99.99% in the IO column. I'm also running an SVN server on this machine through apache and the one way that I've been consistently able to reproduce this is to do an SVN commit of new files or an SVN update from the repository on this server (I am the only one using this SVN repository). This will always reproduce this scenario successfully, but until very recently I had no problems at all checking in/out of SVN. But sometimes it just happens for no detectable reason at all it seems. So it seems like there is some issue with my Apache that leads it to have processes use up a lot of read/write upon certain triggers. I was wondering if anyone could help me uncover that issue. EDIT: OK now it's happening again: This is top: [root@server ~]# top top - 10:56:54 up 2:59, 5 users, load average: 171.46, 70.35, 27.01 Tasks: 328 total, 2 running, 326 sleeping, 0 stopped, 0 zombie Cpu(s): 1.9%us, 2.0%sy, 0.0%ni, 0.0%id, 96.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2021144k total, 1968192k used, 52952k free, 2500k buffers Swap: 4194288k total, 2938584k used, 1255704k free, 39008k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10390 apache 20 0 2774m 936m 6200 D 2.0 47.4 1:52.27 httpd 2149 root 20 0 927m 13m 1040 S 0.7 0.7 1:50.46 namecoind 11 root 20 0 0 0 0 R 0.3 0.0 0:30.10 events/0 23 root 20 0 0 0 0 S 0.3 0.0 0:17.88 kblockd/1 2049 root 20 0 382m 4932 2880 D 0.3 0.2 0:03.67 httpd 2144 root 20 0 1702m 69m 1164 S 0.3 3.5 5:19.68 bitcoind 6325 root 20 0 15164 1100 656 R 0.3 0.1 0:11.09 top 10311 apache 20 0 387m 9496 7320 D 0.3 0.5 0:01.89 httpd 10313 apache 20 0 391m 10m 7364 D 0.3 0.5 0:02.40 httpd 10466 apache 20 0 399m 12m 7392 D 0.3 0.7 0:02.41 httpd 10599 apache 20 0 391m 9324 7340 D 0.3 0.5 0:00.15 httpd 10628 apache 20 0 384m 7620 4052 D 0.3 0.4 0:00.01 httpd 10633 apache 20 0 384m 7048 3504 D 0.3 0.3 0:00.01 httpd 10634 apache 20 0 384m 8012 4048 D 0.3 0.4 0:00.02 httpd 10638 apache 20 0 400m 22m 9.8m D 0.3 1.1 0:01.93 httpd 10640 apache 20 0 385m 8288 4028 D 0.3 0.4 0:00.03 httpd 10641 apache 20 0 401m 21m 6376 D 0.3 1.1 0:01.45 httpd 10759 apache 20 0 385m 8816 3480 D 0.3 0.4 0:01.45 httpd 10773 apache 20 0 384m 8044 3464 D 0.3 0.4 0:00.02 httpd This is an iotop snapshot: Total DISK READ: 5.93 M/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 10732 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 58.48 % httpd 876 be/3 root 0.00 B/s 52.68 K/s 0.00 % 52.98 % [jbd2/dm-1-8] 10906 be/4 root 124.17 K/s 0.00 B/s 0.00 % 23.03 % sh -c [ -x /usr/local/psa/admin/sbin/backupmng ] && /usr/local/psa/admin/sbin/backupmng >/dev/null 2>&1 2156 be/4 root 206.94 K/s 0.00 B/s 0.00 % 21.15 % bitcoind 10904 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 18.94 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock 10773 be/4 apache 7.53 K/s 0.00 B/s 0.00 % 14.77 % httpd 10641 be/4 apache 15.05 K/s 0.00 B/s 0.00 % 11.57 % httpd 10399 be/4 apache 1057.29 K/s 0.00 B/s 43.16 % 10.56 % httpd 10682 be/4 sw-cp-se 158.03 K/s 0.00 B/s 0.00 % 7.45 % sw-engine-cgi -c /usr/local/psa/admin/conf/php.ini -d auto_prepend_file=auth.php3 -u psaadm 10774 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 6.53 % httpd 10624 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 5.53 % httpd 10356 be/4 apache 899.26 K/s 0.00 B/s 35.52 % 4.01 % httpd 10795 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 3.93 % httpd 10804 be/4 apache 7.53 K/s 0.00 B/s 0.00 % 3.08 % httpd 4379 be/4 root 2.89 M/s 0.00 B/s 99.99 % 0.00 % namecoind 10619 be/4 apache 462.80 K/s 0.00 B/s 7.80 % 0.00 % httpd 10636 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 0.00 % httpd 10716 be/4 mysql 105.35 K/s 0.00 B/s 5.92 % 0.00 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock 1988 be/4 root 18.81 K/s 0.00 B/s 0.00 % 0.00 % spamd_full.sock I also ran lsof -p for pid 10390 which was way up top under the top command and this is the bottom line where I can sort of see what request this was and it says CLOSE_WAIT: httpd 10390 apache 34u IPv6 315879 0t0 TCP default-domain.com:https->crawl-66-249-65-91.googlebot.com:42907 (CLOSE_WAIT) I'm still not sure what exactly is causing this all to happen though? I killed that service but %wa and load average remain high, I also stopped mysqld and other services. It really only goes down once I stop httpd altogether, and even then I can't start it without finding remaining hanging httpd processes via "netstat -tulpn", killing those or doing "killall -9 httpd" and after waiting a while for it to cycle through all those then doing /etc/init.d/httpd start

  Read the article

• sar command to generate only CPU utilization and network statistics in Linux

  - by Vijay Shankar Kalyanaraman

  I want to be able to generate the system activity report every 30 seconds or every minute and store in a file and use it for diagnostic purposes on my VM. So I give an output file for the sar command and read it using the "-f" option. But I only use the CPU utilization and network utilization part of the report and so rest is all that I don't want to save (waste the space in the disk to store these reports). Also the sar files that are generated are all binary. Is there a way to collect these stats for the CPU and network utilization alone? and so save almost 2/3rds the space on the disk?

  Read the article

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

• Resizing Partitions on Live RHEL/cPanel Server

  - by Timothy R. Butler

  I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

  Read the article

• PCMCIA preventing laptop from booting up

  - by Pongus

  My friend has brought his dead laptop over. It is a Sony Vaio with Windows Vista. When booting up, it blue screens and reboots. I have tried to boot up with Knoppix and this will freeze when starting up PCMCIA. If I start Knoppix with knoppix nopcmcia it disables pcmcia and boots up fine. So I presume there is a problem with the PCMCIA controller on the laptop. My friend does not use any PCMCIA cards, so doesnt really need it. Is there anyway I can similarly disable PCMCIA so that Windows will boot up fine?

  Read the article

• Creating a bootable external drive in OSX

  - by Brian Postow

  I want to do some slightly dangerous testing, testing an install package I've written, so I've got an external drive, and I want to make it a bootable OSX disk, then I can boot up on the external, do my install, and if it screws things up, it doesn't actually affect the usability of my machine. The problem is that when I stick the disk that came with my computer (It's actually another computer in the office, but they're both minis) in and try to run the installer, it says "You cannot install OSx 10.6 on this computer". Now, the computer is ALREADY running 10.6, so that's a kind of silly error message... It does this when I boot to the DVDRom as well. Am I doing something really really dumb? or what?

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a DFI CM33-TL/G ATX (identified using SiSoft Sandra) motherboard hosting an Intel Celeron 1.3GHz CPU, 768Mb PC133 SDRAM, a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board based on the NEC uPD720102 chipset containing 3 external and 1 internal USB sockets. It's also hosting a 1.44Mb floppy drive on FDD0, a new 80Gb Western Digital hard drive running as master on IDE0 and a Panasonic DVD+/-RW running as master on IDE1. All this is sitting in a slimline case running off a Macron Power MPT-135 135W Flex power supply. The motherboard is running a version of Award BIOS 05/24/2002-601T-686B-6A6LID4AC-00. Could this be updated? If so, from where? I've raked through the manufacturer's website but can't find any hint of downloads for either drivers or BIOS updates. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• BootMgr is missing, usual fixes don't work

  - by parsley72

  I know this question has been asked before but I've tried all the usual fixes and nothing works. Basically the hard drive had two partitions with Vista and Windows 7. I've deleted the Vista partition to make more room and expanded the Windows 7 partition to fill the drive (using GParted). I've tried: Running Startup Repair - it doesn't find any problems. Setting partition to Active - worked. bootsect /nt60 c: - worked. BootRec /FixMbr - worked. BootRec /FixBoot - worked. BootRec /ScanOs - I get the message "Total identified Windows installations: 0" BootRec /RebuildBcd - I get the message "Total identified Windows installations: 0" BcdEdit shows a Windows Boot Manager and a Windows Boot Loader, both on C: partition. What else can I try?

  Read the article

• Windows Server 2003 Synchronize Not Sticking

  - by lkessler

  We have a Windows Server 2003. It had Raid running on 2 disks. One disk failed and the Raid Controller failed. We replaced the disk and controller and restored everything. No data was lost. The users of that server found that there were a number of directories that appeared empty. We found that from their machine, we could right-click on the directory and select "Synchronize" and the files in the directory would now be visible to them. However, when opening Internet Explorer and browsing the web and ftp'ing to a web site, the files in the directory would vanish. We would have to "Synchronize" them again to get them to reappear. What is going on to cause this need to Synchronize and then re-Synchronize again? What do we need to do to fix this so that the directories are permanently visible?

  Read the article

• drive life time

  - by Remus Rigo

  hi all can anyone tell me or send me a ink about the lifetime of drives (floppy,hard disk, CD, DVD, flash...) thanks

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• Windows XP Pro SP3 stop error code 0x000000F4

  - by Andrew Ford

  I have a system running Windows XP Pro SP3. My wife is the primary user of this system, and the last several days in a row, when she tries to log in to the system it gives her a BSOD with the stop error code 0x000000F4. The rest of the error codes change every time she tries to log on, but that one seems to stay constant. The error it gives me is: A process or thread crucial to system operation has unexpectedly exited or been terminated. The machine will also get stuck in a boot loop, where it keeps giving me the screen saying that windows did not start successfully, and to choose how to start windows. I have tried Safe Mode, Last known Good Config, and Normally, and all have resulted in either a return to the boot loop, or BSOD. What might this mean? How can I fix it, without doing a clean install?

  Read the article

• ThinkPad T400 backlight doesn't always turn on when booting from battery

  - by srunni

  I have a Lenovo ThinkPad T400, which I've owned for about a year. A while back, I noticed a problem in which the LED backlight would not always turn on when booting from battery. Usually, if I hold the power button down until the BIOS screen shows up, the backlight turns, but sometimes even that doesn't work. If I just press the power button and let it go right away, the backlight usually doesn't turn on. This happens before the OS (I dual-boot Linux and Windows) gets a chance to boot - the BIOS screen itself is displayed without the backlight if it fails to turn on, so the problem isn't at the OS level. Any ideas? Thanks!

  Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >