Search Results

Search found 28288 results on 1132 pages for 'home directory'.

Page 284/1132 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

• IIS 7.0 rewrite url problem

  - by Jouni Pekkola

  Hello, How i can set redirect url for virtual directory in iis 7.0.I have installed lates url rewrite module 2. ? I could explain my problem with exsample. I have website on my iis 7.0 server: www.mysite.com I desided to create virtual directory sales under my site which is pointing to website root directory.Now I need create redirect url for the vdir. The vdir is pointing same virtual root directory as my site root is The big idea is that i can write on browser www.mysite/sales and i will automaticly redirect to url www.mysite.com?productid=200. I tried to make redirect with rewite url for vdir(not website), but I always get this error message : cannot add duplicate colletion entry of type 'rule' with unique key key attribute 'name' set to "test".This happens when i am pointing for virtual vdir and try to add rule. I can add rules to website level,but rules doesn work. I mean url www.mysite/sales gives me follwing error. I know that key is unique I checked it from web.config. This kind of feature was really easy use in IIS 6.0, just point vdir with your mouse and set properties--a redirect to url. Please some one explain what is right way to do it in IIS 7.0

  Read the article

• Why just splitting an Ethernet cable does not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically one-line communication bus (for argument's sake, I am excluding hubs). All machines attached in the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why splitting one Ethernet line from my home router into two and connecting two computers would not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room and I had put a computer in another room (also my room, though). Since wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• Can mod-rewrite be used to set environmental variables?

  - by VLostBoy

  Hi, I've got an existing simple rewrite rule like so: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> This works fine, but I want to do one of either two things. On the basis of detecting the clients accept-language header, I want to either (i) Set the detected language as an environmental variable that the script can use or (ii)Rewrite the request so that the url begins with the language code (e.g. www.example.com/en/some/resource) In terms of implementing (i), I defined this rule: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # if the users preferred language is supported... RewriteCond %{HTTP:Accept-Language} ^.*(de|es|fr|it|ja|ru|en).*$ [NC] # define an environmental variable PREFER_LANG RewriteRule ^(.*)$ - [env=PREFER_LANG:%1] # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> I've tried a few variations, but PREFER_LANG is not defined in $_SERVER nor retrievable by getenv. In terms of implementing (ii)... lets just say its messy. I'll post it if I can't get an answer to one. Can anyone advise me? Thanks!

  Read the article

• exim4 seem to stop listening

  - by trakos

  Hey, I have a strange problem with my exim4 configuration. I have a dedicated server running debian for quite a long time now, but I'm not really using it actively recently, so everything just worked due to lack of changes ;) However, recently, my exim4 smtp stopped answering on port 25. It does not respond through localhost, as well - even though it's set to listen on any interface available. Some things I've checked: ks:/home/trakos/Maildir/new# netstat -ap | grep exim tcp 0 0 *:smtp : LISTEN 12521/exim4 ks:/home/trakos/Maildir/new# exiwhat 12521 daemon: -q30s, listening for SMTP on port 25 (IPv4) ks:/home/trakos/Maildir/new# cat /var/log/exim4/rejectlog ks:/home/trakos/Maildir/new# cat /var/log/exim4/paniclog The queue is set for 30s only because I was running it in a non-daemon mode to see any output. Strangely enough, no suspicious output is given, netstat even shows it is listening on port 25, but still trying to telnet to it times out. The only things that may have changed recently are: I've got second IP for my server I remember that few days ago my spamassasin crashed, and I've started it up again So yeah, I'm really clueless about this one now :P I mean, I don't even know what could be failing here. Could someone give me some ideas what should I check next? PS: it has uptime of 442 days, so I haven't really tried rebooting it yet ^^

  Read the article

• default domain and first domain in apache2 causing trouble

  - by acidzombie24

  I have 3 sites and a default/test site using mono's test page. I created aFirst, c, d, e, zLast. zLast has rewrite rules that should be evaluated last. Since the first VirtualHost seen is the default i set it to this --aFirst-- <VirtualHost *:80> ServerName www.domain.tld ServerAdmin webmaster@localhost DocumentRoot /var/www/test DirectoryIndex index.html index.aspx index.php MonoDocumentRootDir "/var/www/test" MonoServerPath rootsite "/usr/local/bin/mod-mono-server2" MonoApplications rootsite "/:/var/www/test" <Directory /var/www/test> MonoSetServerAlias rootsite SetHandler mono AddHandler mod_mono .aspx .ascx .asax .ashx .config .cs .asmx </Directory> </VirtualHost> The problem is my default page (the ip address of my server) and the first website (csite.ddomain.net) have problems (even though csite is defined in c and is not the first virtual host). The ip address of my server and csite.ddomain.net ALWAYS load the same site. Either monos test page or the csite. It flips every time i restart apache. Why isnt the server ip address always loading the default page (mono test page) and why isnt csite.ddomain.net always loading the site i want!?! Heres the config for --csite-- <VirtualHost *:80> ServerName csite.testdomain.net ServerAdmin webmaster@localhost ServerAlias s.csite.testdomain.net DocumentRoot /var/www/prjname DirectoryIndex index.html index.aspx MonoDocumentRootDir "/var/www/prjname" MonoServerPath rootsite "/usr/local/bin/mod-mono-server2" MonoApplications rootsite "/:/var/www/prjname" <Directory /var/www/prjname> MonoSetServerAlias rootsite SetHandler mono AddHandler mod_mono .aspx .ascx .asax .ashx .config .cs .asmx </Directory> </VirtualHost> aFirst, c, d, e, zLast are all enabled.

  Read the article

• mod_perl custom configuration directives don't work when placed in .htaccess and there is <Location>

  - by al_l_ex

  I'm trying to complete Redmine's feature request #2693: Use Redmine.pm to authenticate for any directory (1). I have not much knowledge on all these things and need help. Redmine uses mod_perl module Redmine.pm for authentication & authorization. This module defines several custom configuration directives. I've successfully modified patch from (1) and it works when all config is in <Location>: <Location /digischrank/test> AuthType basic AuthName "Digischrank Test" Require valid-user PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=SomedaTaBAse;host=localhost" RedmineDbUser "SoMeuSer" RedmineDbPass "SomePaSS" RedmineProject "digischrank" </Location> But when I move one of these directives (RedmineProject, see (1)) in .htaccess file, Redmine.pm doesn't see it! I've tried to change <Location> to <Directory> and add AllowOverride All. Directives from .htaccess is visible, but remaining ones from <Directory> - not. I don't want to move all directives to each .htaccess. When I add <Location> in addition to <Directory>, again - only directives from <Location> are visible. As far as I know, directives should be merged. I miss something?

  Read the article

• ProxyPass for specific vhost

  - by Steve Robbins

  I have a web server that it set up to dynamically server different document roots for different domains <VirtualHost *:80> <IfModule mod_rewrite.c> # Stage sites :: www.[document root].server.company.com => /home/www/[document root] RewriteCond %{HTTP_HOST} ^www\.[^.]+\.server\.company\.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^www\.([^.]+)\.server\.company\.com(.*) /home/www/$1/$2 [L] </IfModule> </VirtualHost> This makes it so that www.foo.server.company.com will serve the document root of server.company.com:/home/www/foo/ For one of these sites, I need to add a ProxyPass, but I only want it to be applied to that one site. I tried something like <VirtualHost *:80> <Directory /home/www/foo> UseCanonicalName Off ProxyPreserveHost On ProxyRequests Off ProxyPass /services http://www-test.foo.com/services ProxyPassReverse /services http://www-test.foo.com/services </Directory> </VirtualHost> But then I get these errors ProxyPreserveHost not allowed here ProxyPass|ProxyPassMatch can not have a path when defined in a location. How can I set up a ProxyPass for a single virtual host?

  Read the article

• Ubuntu Launcher Items Don't Have Correct Environment Vars under NX

  - by ivarley

  I've got an environment variable issue I'm having trouble resolving. I'm running Ubuntu (Karmic, 9.10) and coming in via NX (NoMachine) on a Mac. I've added several environment variables in my .bashrc file, e.g.: export JAVA_HOME=$HOME/dev/tools/Linux/jdk/jdk1.6.0_16/ Sitting at the machine, this environment variable is available on the command line, as well as for apps I launch from the Main Menu. Coming in over NX, however, the environment variable shows up correctly on the command line, but NOT when I launch things via the launcher. As an example, I created a simple shell script called testpath in my home folder: #!/bin/sh echo $PATH && sleep 5 quit I gave it execute privileges: chmod +x testpath And then I created a launcher item in my Main Menu that simply runs: ./testpath When I'm sitting at the computer, this launcher runs and shows all the stuff I put into the $PATH variable in my .bashrc file (e.g. $JAVA_HOME, etc). But when I come in over NX, it shows a totally different value for the $PATH variable, despite the fact that if I launch a terminal window (still in NX), and type export $PATH, it shows up correctly. I assume this has to do with which files are getting loaded by the windowing system over NX, and that it's some other file. But I have no idea how to fix it. For the record, I also have a .profile file with the following in it: # if running bash if [ -n "$BASH_VERSION" ]; then # include .bashrc if it exists if [ -f "$HOME/.bashrc" ]; then . "$HOME/.bashrc" fi fi

  Read the article

• Viewing local websites on my iOS device over Wi-fi

  - by John

  Trying to view some local html/css/js files in a mobile browser on my iOS device. Thought maybe file-sharing would be an option, and is, but I'm not completely satisfied with it. Any time I try to do the following an error occurs. Web sharing is on and available at http://192.168.1.101/~user but I have to manually copy the files in. If I try to symlink a folder in so that the address could be viewed at ''~user/some_dir by issuing $ ln -s /Users/user/dev/some_dir ~/Sites/ then I get a 403 forbidden error. I've tried to remedy this by modifying a user.conf file in /private/etc/apache2/ and using the following syntax: <Directory "/Users/user/Sites/"> Options Indexes MultiViews SymLinks AllowOverride None Order allow,deny Allow from all </Directory> but nope, still doesn't work. I get a 403 error. If I try to symlink each individual file in instead of using a directory as a sub-directory, same error. Any help would be greatly appreciated! I'd just like to symlink directories into the ~/Sites one and browse them on my iOS device over wifi. I'm on OS X 10.7 Lion trying to connect with iOS 5.

  Read the article

• Relative path incorrect in the view layer when hosting a rails3 app in a subdirectory using passenger and apache

  - by Saifis

  I want to host multiple Rails apps on a multiple server using sub-directories. And have encountered some relative path problems. I have made a symbolic link to the app's public directory and placed it in the /var/www/html directory, var/www/html/ /test_app (symbolic link to the public folder of test_app) and set apache as so LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.12/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.12 PassengerRuby /usr/local/bin/ruby <VirtualHost *:80> ServerName test.com DocumentRoot /var/www/html Options Indexes FollowSymLinks -MultiViews RailsBaseURI /test_app </Location> </VirtualHost> The links in the app itself works just fine, all the links acknowledge the test_app/ directory and work, however, when it comes to showing images in the public directory in the view, the relative path goes wrong. Say I have /system/files/1/aaa.png it goes looking for it in /var/www/html/system/files/1/aaa.png rather than /var/www/html/test_app/system/files/1/aaa.png As far as I understand this is an Apache setting problem than something to be done in Rails, if its possible I would prefer to have it contained in the conf file of apache rather than having to alter the code.

  Read the article

• Sudo won't execute command as another user

  - by TOdorus

  I'm trying to get a unicorn server to start when the server boots. I've created a shell script which works if I log as the ubuntu user and run /etc/init.d/unicorn start Shell script #!/bin/sh case "$1" in start) cd /home/ubuntu/projects/asbest/current/ unicorn_rails -c /home/ubuntu/projects/asbest/current/config/unicorn.rb -D -E production ;; stop) if ps aux | awk '{print $2 }' | grep `cat ~/projects/asbest/current/tmp/pids/unicorn.pid`> /dev/null; then kill `cat ~/projects/asbest/current/tmp/pids/uni$ ;; restart) $0 stop $0 start ;; esac When I rebooted the server I noticed that the unicorn server wasn't listening to a socket. Since I ran the code succesfully as the ubuntu user I modified the script to let it always use the ubuntu user via sudo. #!/bin/sh case "$1" in start) cd /home/ubuntu/projects/asbest/current/ sudo -u ubuntu unicorn_rails -c /home/ubuntu/projects/asbest/current/config/unicorn.rb -D -E production ;; stop) if ps aux | awk '{print $2 }' | grep `cat ~/projects/asbest/current/tmp/pids/unicorn.pid`> /dev/null; then sudo -u ubuntu kill `cat ~/projects/asbest/current/tmp/pids/uni$ ;; restart) $0 stop $0 start ;; esac After rebooting unicorn still wouldn't start, so I tried running the script from the command line. Now I get the following error sudo: unicorn_rails: command not found I've searched high and low to what could cause this, but I'm afraid I've tapped my limited understanding of Linux. From what I can understand is that although sudo should use the ubuntu user to execute the commands, it still uses the environment of the root user, which isn't configured to run ruby or unicorn. Does anybody have any experience with this?

  Read the article

• Apache2 doesn't serve PHP-scripts correctly [closed]

  - by cmbrnt

  I've run into a problem with my Apache 2.2.16 configuration, running on Debian Squeeze. The problem is that it stopped serving PHP5-scripts completely. When I try to access the sites with Google Chrome, it instead downloads a file called "download", which contains the contents of the script. This is of course not a good thing. It does serve common html-files perfectly... I've been at this for quite a while now, and after all the googling and troubleshooting, I thought it would be a good time to ask you guys. Here's what I've got: The php5 and libapache2-mod-php5 packages are installed /etc/apache2/mods-available contains both php5.load and php5.conf, and these are symlinked from the mods-enabled directory The /etc/php5/ directory is left untouched since the installation. Here's the contents of /etc/apache2/mods-available/php.load: LoadModule php5_module /usr/lib/apache2/modules/libphp5.so And /etc/apache2/mods-available/php.conf: <IfModule mod_php5.c> <FilesMatch "\.ph(p3?|tml)$"> SetHandler application/x-httpd-php </FilesMatch> <FilesMatch "\.phps$"> SetHandler application/x-httpd-php-source </FilesMatch> <IfModule mod_userdir.c> <Directory /home/*/public_html> php_admin_value engine Off </Directory> </IfModule> </IfModule> What am I missing? This is a server with modified virtual hosts and the like, so I might have changed some settings which causes this problem, but simply purging and reinstalling is not an option so far, since the configuration is quite extensive. Any help would be great. Thanks.

  Read the article

• GIT and Django Projects

  - by Garfonzo

  I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

  Read the article

• RewriteRule causes POST data to get dumped before I can access it

  - by MatthewMcGovern

  I'm currently setting up my own 'webserver' (a Ubuntu Server on some old hardware) so I can have a mess around with PHP and get some experience managing a server. I'm using my own little MVC framework and I've hit a snag... In order for all requests to make it through the dispatcher, I am using: <Directory /var/www/> RewriteEngine On RewriteCond %{REQUEST_URI} !\.(png|jpg|jpeg|bmp|gif|css|js)$ [NC] RewriteRule . HomeProjects/index.php [L] </Directory> Which works great. I read on Stackoverflow to change the [L] to [P] to preserve post data. However, this causes every page to return: Not Found The requested URL <url> was not found on this server. So after some more searching, I found, "Note that you need to enable the proxy module, and the proxy_http_module in the config files for this to work." The problem is, I have no idea how to do this and everything I google has people using examples with virtual hosts and I don't know how to 'translate' that into something useful for my setup. I'm accessing my webserver via my public IP and forwarding traffic on port 80 to the web server (like I'm pretending I have a domain/server). How can I get this enabled/get post data working again? Edit: When I use the following, the server never responds and the page loads indefinately? LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so <Directory /var/www/> RewriteEngine On RewriteCond %{HTTP_REFERER} !^http://(.+\.)?82\.6\.150\.51/ [NC] RewriteRule .*\.(jpe?g|gif|bmp|png|jpg)$ /no-hotlink.png [L] RewriteCond %{REQUEST_URI} !\.(png|jpg|jpeg|bmp|gif|css|js)$ [NC] RewriteRule . HomeProjects/index.php [P] </Directory>

  Read the article

• Ways of file copy

  - by Tim

  I sometimes found that when using simple right-click and copy-and-paste, some files/directories are not copied completely or not at all, because of various reasons, such as some saved webpage files/directories have some strange characters in their names or their names are too long. For example, in Windows 7, I save this webpage http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-problems/ completely in a very deep directories whose parent directories may have long names, I cannot copy its top ancestry directory, as Windows complains the filename for the saved webpage directory is too long. In Ubuntu, sometimes I can save a file with some special character such as newline under some directory. But when I copy that directory, it will say the file name has some special character and I will have to manually remove the character. Such cases are complained in both Windows and Ubuntu. I was wondering what some better ways to accomplish the copy job in both Windows and Ubuntu. For example, will archiving all to be copied into a single archive help? If yes how to do that? Thanks and regards!

  Read the article

• Remote Desktop leaves host unresponsive

  - by Jeff Dalley

  I have my desktop PC at home set up to accept remote connections, and I often connect to it from work on my laptop via mstsc.exe. However, every time I remote to it, I find when I go home that despite the monitor being on - it's not receiving an image and it looks as though the computer is hibernating/asleep. I basically have to restart it whenever I get home and I know there's an answer for why its doing this. More details: When exiting the remote session, I have tried both logging off the account, and closing the RDP window without logging off; both give the same result. When I get home to the desktop I of course try moving the mouse, ctrl+alt+del to see if its responsive to restart, multiple key-press to see if I can get any audio out of it; It seems pretty obvious its sleeping/hibernating in some way: Nothing happens in any of these cases and a physical restart is necessary. Both desktop and laptop are running Windows 7 Ultimate. I'm thinking it really is sleeping/hibernating it, and I'm not sure why because left alone my desktop's power options are set to never turn off the HDD or change its state - I leave it on 24/7. This could be a stupid error on my part but I just can't see it! Thanks.

  Read the article

• Apache Virtual Host Issue

  - by Nik

  I think I hate Apache now, but on with the issue. It might be a configuration error on my end or just my inability to see what's right in front of me, but I'm trying to configure a sub-domain in Apache and no matter what, it always redirects the sub-domain to the web root of the main domain. My configuration is posted below (and yes, the domain name information was purposefully modified): <VirtualHost *> DocumentRoot /var/www/root/ ServerName example.com <Directory /var/www/root/> allow from all Options +Indexes </Directory> </VirtualHost> <Directory /usr/share/squirrelmail> Options Indexes FollowSymLinks <IfModule mod_php5.c> php_flag register_globals off </IfModule> <IfModule mod_dir.c> DirectoryIndex index.php </IfModule> # access to configtest is limited by default to prevent information leak <Files configtest.php> order deny,allow deny from all allow from 127.0.0.1 </Files> </Directory> # users will prefer a simple URL like http://webmail.example.com <VirtualHost *> DocumentRoot /usr/share/squirrelmail/ ServerName squirrelmail.example.com </VirtualHost>

  Read the article

• File upload folder permission fastCGI - How to make it writeable?

  - by user6595

  I am using centos 5.7 with cPanel WHM running fastcgi/suEXEC I am trying to make a particular folder writable to allow a script to upload files but seem to be having problems. The folder (and all recursive folders) I want to be writable is: /home/mydomain/public_html/uploads And I want only scripts run by the user "songbanc" to be able to write to this directory. I have tried the following: chown -R songbanc /home/mydomain/public_html/uploads chmod -R 755 /home/mydomain/public_html/uploads But it still doesn't seem to work. The script will only upload files if I set the permissions manually via FTP client to 777. I assume I am misunderstanding how to set permission for users with fastcgi and hopefully someone can help me. Thanks in advance EDIT: Running getfacl on one of the scripts or folders gives the following: # file: home/mydomain/public_html/ripples/1.jpg # owner: songbanc # group: songbanc So it appears that the owner is correct? I'm now totally confused! EDIT 2: The plot thickens... lsattr and chattr are returning Inappropriate ioctl for device While reading flags on...

  Read the article

• Problems with Program startup in WIn 7 this week

  - by PyNEwbie

  I have a program (ISYS) that I have been using since 2006. It migrated successfully to Windows 7. Just yesterday it started manifesting this strange behavior. The program has a selector to allow you to select a directory that might have relevant files for the program. As of yesterday the program will only let me select folders on the C drive. For example I have a folder on D that I need to access with this program - from the GUI when I select the D drive the directory list does not load, instead it churns away using 17% of the CPU cycles. I have let it run for an hour several times. I have found that I can get the directory I want by using a batch file to start the program but this limits my ability to do certain things I really need to use the GUI. I did a number of reboots and other tests - I disconnected drives but once I try to select some directory on a drive other than C it churns away. I have experimented quite a bit and am convinced (which means I am wrong) that this has something to do with some setting change on my computer that I can't figure out as I don't see any updates. Since ISYS has not been updated I feel confident it is something internal. Any suggestions would be appreciated.

  Read the article

• Google Sites (via Apps) setup questions

  - by Dave

  I thought that it would be a piece of cake to set up a Google site via Google Apps, but perhaps my previous (limited) experience with web development has given me unrealistic expectations. I have actually had a really tough time finding help with the exact question that I have, which is: How do I change the home page contents??? You see, I'm used to having hosting with someone like GoDaddy, where I can just ftp in and drop my HTML files in the www folder. From research I have found that this is simply not possible with any flavor of Google Sites. That's fine, I can live with it. So let's say I have www.mydomain.com. When I hit that URL, it redirects me to a very long URL (unfortunately) like https://sites.google.com/a/mydomain.com/sites/system/app/pages/meta/domainWelcome, which just says: Google Apps Welcome to mydomain.com If you are the domain administrator get started creating your home page with Google Sites Great! I want to do that. So I click on the "If you are the..." link and end up at a screen where I can choose a template, a name, and some visibility options. If I click on My Sites, there isn't a "default" site, i.e. the one that www.mydomain.com displays. I figured that maybe I just have to create a site first, so I went ahead and did that. My first test was to create a site that was publicly accessible. I thought that maybe if I did that, the Google would decide that this must be my home page since it's the only one. But it doesn't, and I still get the "Welcome to" page. Under "More Actions", I didn't see anything interesting except for "Manage site". I went in there and had a peek around, and didn't see anything about using this as the default home page. Am I looking for something that just doesn't exist? I can't believe there isn't a way to modify the "domain welcome to" page...

  Read the article

• mod_wsgi -apache configuration file

  - by Kevin

  guys sorry I'm a newbie to this but I've been following the mod_wsgi configuration tutorial and it's very spotty. In my httpd.conf file I add the virtual host like so: 'Main' server configuration # The directives in this section set up the values used by the 'main' server, which responds to any requests that aren't handled by a definition. These values also provide defaults for any containers you may define later in the file. # All of these directives may appear inside containers, in which case these default settings will be overridden for the virtual host being defined. # ServerName wsgihost DocumentRoot "/Library/WebServer/Documents" <Directory "/Library/WebServer/Documents"> Order allow,deny Allow from all </Directory> WSGIScriptAlias /myapp /Users/KL/modwsgi/env/myapp.wsgi <Directory "/Users/KL/modwsgi/env"> <Files myapp.wsgi> Order allow,deny Allow from all </Files> </Directory> Now, when I also added in my local host the following: 127.0.1.1 wsgihost but I can't seem to connect. Am I doing something terribly wrong?

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• SSL and regular VHost on the same server [duplicate]

  - by Pascal Boutin

  This question already has an answer here: How to stop HTTPS requests for non-ssl-enabled virtual hosts from going to the first ssl-enabled virtualhost (Apache-SNI) 1 answer I have a server running Apache 2.4 on which run several virtual hosts. The problem I noticed is that if I try to access let's say https://example.com that have no SSL setuped, apache will automatically try to access the first VHost that has SSL activated (which is litteraly not the same site). How can we prevent this strange behaviour, or in other words, how to say to Apache to ignore SSL for a given site. Here's sample of what my .conf files look like : <VirtualHost foobar.com:80> DocumentRoot /somepath/foobar.com <Directory /somepath/foobar.com> Options -Indexes Require all granted DirectoryIndex index.php AllowOverride All </Directory> ServerName foobar.com ServerAlias www.foobar.com </VirtualHost> <VirtualHost test.example.com:443> DocumentRoot /somepath/ <Directory /somepath/> Options -Indexes Require all granted AllowOverride All </Directory> ServerName test.example.com SSLEngine on SSLCertificateFile [­...] SSLCertificateKeyFile [­...] SSLCertificateChainFile [­...] </VirtualHost> With this, if I try to access https://foobar.com chrome will show me a SSL error that mention that the server was identifying itself as test.example.org Thanks in advance !

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  Hi, I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• PPTP VPN on Server 2008 Enterprise

  - by Mike K

  I asked this question on Server fault and was told that was not allowed so im moving it here. I am running Windows Server 2008 enterprise in my HOME network inside of vmware workstation. I am running this on my home network to setup a PPTP VPN connection at home. I have correctly setup everything I needed to make it work, including opening all the ports, 1723 and 43 (GRE). I am able to connect just fine, but when I connect I dont have internet unless I uncheck use remote gateway. The thing is, I want to use the remote gateway to route all my traffic through that connection. Can someone tell me why this isnt working and how to get it to work. When I have remote gateway checked, and I do an ipconfig I dont get a remote gateway for the VPN connection, its 0.0.0.0 when id assume if connected properly should be 192.168.1.254 (my ATT Home Router). Also, if I cant get the remote gateway issue to work, and I have to uncheck that box to get internet, does this mean my VPN session is no longer encrypted? I am fully aware the PPTP VPN is the weakest VPN encryption out there but still having that extra layer of security when im on an unsecure wifi connection makes me feel a bit better. Thank you for all your help in advance. Someone told me I need to setup a gateway or router configured on the server. If thats the case, how go I go about telling the remote co

  Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >